標準號 |
中文名稱 |
英文名稱 |
| BS EN 1316-1-1997 |
軟木原木.質量分級.水青崗木和橡木 |
(Hardwood round timber - Qualitative classification - Oak and beech) |
| BS EN 1316-2-1997 |
軟木原木.質量分級.白楊木 |
(Hardwood round timber - Qualitative classification - Poplar) |
| BS EN 1316-3-1998 |
硬木圓形木材.質量等級.槐木,槭木和懸鈴木 |
(Hardwood round timber - Qualitative classification - Ash and maples and sycamore) |
| BS EN 13160-1-2003 |
檢漏系統.一般原理 |
(Leak detection systems - General principles) |
| BS EN 13160-2-2003 |
檢漏系統.壓力和真空系統 |
(Leak detection systems - Pressure and vacuum systems) |
| BS EN 13160-3-2003 |
檢漏系統.水箱的液體系統 |
(Leak detection systems - Liquid systems for tanks) |
| BS EN 13160-4-2003 |
檢漏系統.泄漏污染物或填隙空間用液體和/或蒸氣傳感器系統 |
(Leak detection systems - Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces) |
| BS EN 13160-5-2004 |
檢漏系統.液位計檢漏系統 |
|
| BS EN 13160-6-2003 |
檢漏系統.監測井中傳感器 |
(Leak detection systems - Sensors in monitoring wells) |
| BS EN 13160-7-2003 |
檢漏系統.填隙空間、泄漏防護襯和泄漏防護套的一般要求和試驗方法 |
(Leak detection systems - General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets) |
| BS EN 13161-2002 |
天然石料試驗方法.恒定瞬間抗彎強度的測定 |
(Natural stone test methods - Determination of flexural strength under constant moment) |
| BS EN 13162-2001 |
建筑物的熱絕緣產品.工廠生產的礦物羊毛產品.規范 |
(Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification) |
| BS EN 13163-2001 |
建筑物的熱絕緣產品.工廠生產的膨脹聚苯乙烯產品.規范 |
(Thermal insulation products for buildings - Factory made products of expanded polystyrene - Specification) |
| BS EN 13164-2001 |
建筑物的熱絕緣產品.工廠生產的聚苯乙烯泡沫.規范 |
(Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification) |
| BS EN 13165-2001 |
建筑物的熱絕緣產品.工廠生產的硬質聚氨酯泡沫產品.規范 |
(Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification) |
| BS EN 13166-2001 |
建筑物的熱絕緣產品.工廠生產的酚醛泡沫產品.規范 |
(Thermal insulation products for buildings - Factory made products of phenolic foam - Specification) |
| BS EN 13167-2001 |
建筑物的熱絕緣產品.工廠生產的多孔玻璃產品.規范 |
(Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification) |
| BS EN 13168-2001 |
建筑物的熱絕緣產品.工廠生產的木絲產品.規范 |
(Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification) |
| BS EN 13169-2001 |
建筑物的熱絕緣產品.工廠生產的膨脹珍珠巖產品.規范 |
(Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification) |
| BS EN 1317-1-1998 |
道路約束系統.試驗方法的術語和通用標準 |
(Road restraint systems - Terminology and general criteria for test methods) |
| BS EN 1317-2-1998 |
道路防護體系.安全柵欄的性能等級、沖擊試驗、驗收標準和試驗方法 |
(Road restraint systems - Performance classes, impact test acceptance criteria and test methods for safety barriers) |
| BS EN 1317-3-2000 |
道路防護體系.防護欄的性能等級、沖擊試驗、驗收標準和試驗方法 |
(Road restraint systems - Performance classes, impact test acceptance criteria and test methods for crash cushions) |
| BS EN 13170-2001 |
建筑物的熱絕緣產品.工廠生產的膨脹軟木產品.規范 |
(Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification) |
| BS EN 131700-1998 |
電子器件質量評定協調體系.分規范:直流電流用有薄層金屬箔和一聚碳酸酯薄膜電介質電極的固定電容器. |
(Harmonized system of quality assessment for electronic components - Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric) |
| BS EN 131701-1998 |
電子器件質量評定協調體系.空白詳細規范:直流電流用有薄層金屬箔和一聚碳酸酯薄膜電介質電極的固定電容器 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielect) |
| BS EN 131702-1998 |
電子器件質量評定協調體系.空白詳細規范:直流電流用有薄層金屬箔和一聚碳酸酯薄膜電介質電極的固定電容器 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielect) |
| BS EN 13171-2001 |
建筑物的熱絕緣產品.工廠生產的木纖維產品.規范 |
(Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification) |
| BS EN 13172-2001 |
熱絕緣產品.合格評定 |
(Thermal insulating products - Evaluation of conformity) |
| BS EN 13173-2001 |
鋼制近海浮式建筑物的陰極保護 |
(Cathodic protection for steel offshore floating structures) |
| BS EN 13174-2001 |
港口設備的陰極保護 |
(Cathodic protection for harbour installations) |
| BS EN 13175-2003 |
液化石油氣(LPG)罐閥和配件的規范和試驗 |
(Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings) |
| BS EN 13176-2000 |
人類飲用水處理用化學試劑.乙醇 |
(Chemicals used for treatment of water intended for human consumption - Ethanol) |
| BS EN 13177-2003 |
人類生活用水處理用化學制劑.甲醇 |
(Chemicals used for treatment of water intended for human consumption - Methanol) |
| BS EN 13178-2000 |
人員的眼睛保護.雪地汽車使用者用護目器 |
(Personal eye protection - Eye protectors for snowmobile users) |
| BS EN 13179-1-2000 |
瀝青混合料中用填充集料的試驗.三角環和球試驗 |
(Test for filler aggregate used in bituminous mixtures - Delta ring and ball test) |
| BS EN 13179-2-2000 |
瀝青混合料中用填充集料的試驗.瀝青值 |
(Test for filler aggregate used in bituminous mixtures - Bitumen number) |
| BS EN 1318-1997 |
鋪地織物.襯里表面有效厚度的測定 |
(Textile floor coverings - Determination of the apparent effective thickness of the backing) |
| BS EN 13180-2002 |
建筑物的通風.通風道工程.軟導管尺寸和機械要求 |
(Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts) |
| BS EN 131800-1998 |
電子器件質量評定協調體系.分規范:固定聚丙烯薄膜電介質金屬箔直流電容器 |
(Harmonized system of quality assessment for electronic components - Sectional specification: fixed polypropylene film dielectric metal foil d.c. capacitors) |
| BS EN 131801-1998 |
電子器件質量評定協調體系.空白詳細規范:固定聚丙烯薄膜電介質金屬箔直流電容器.評估E級 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E) |
| BS EN 131802-1998 |
電子器件質量評定協調體系.空白詳細規范:固定聚丙烯薄膜電介質金屬箔直流電容器.評估EZ級 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level EZ) |
| BS EN 13181-2001 |
建筑物通風.終端.煙囪的性能試驗.以模擬砂為條件的煙囪的性能試驗 |
(Ventilation for buildings - Terminals - Performance testing of louvres - Performance testing of louvres subject to simulated sand) |
| BS EN 13182-2002 |
建筑物通風.通風室中空氣流速測量?jī)x器的要求 |
(Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces) |
| BS EN 13183-1-2002 |
一片鋸材的含水量.用烘干法測定 |
(Moisture content of a piece of sawn timber - Determination by oven dry method) |
| BS EN 13183-2-2002 |
一片鋸材的含水量.用電阻法估計 |
(Moisture content of a piece of sawn timber - Estimation by electrical resistance method) |
| BS EN 13183-3-2005 |
一片鋸材的含水量.電容估算法 |
|
| BS EN 13184-2001 |
無損檢驗.滲漏試驗.壓力變化方法 |
(Non-destructive testing - Leak testing - Pressure change method) |
| BS EN 13185-2001 |
無損檢驗.滲漏試驗.示蹤氣體方法 |
(Non-destructive testing - Leak testing - Tracer gas method) |
| BS EN 13187-1999 |
建筑物的熱性能.建筑物外墻熱平衡的定量測定.紅外線法 |
(Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method) |
| BS EN 13188-2000 |
醋.農業原料的液體制產品.定義、要求和標記 |
(Vinegar - Product made from liquids of agricultural origin - Definitions, requirements, marking) |
| BS EN 13189-2000 |
乙酸食品等級.非農業原材料制產品.定義、要求和標記 |
(Acetic acid food grade - Product made from materials of non-agricultural origin - Definitions, requirements, marking) |
| BS EN 1319-1999 |
帶額定熱負荷等于或小于70kW的鼓風燃?xì)鈬娮斓募矣檬覂?nèi)保暖用強制對流燃?xì)鉄犸L(fēng)裝置 |
(Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW) |
| BS EN 13190-2002 |
指針式溫度計 |
(Dial thermometers) |
| BS EN 13191-1-2000 |
清淡食物.溴化物殘留量的測定.作為無機溴化物的總溴化物含量的測定 |
(Non-fatty food - Determination of bromide residues - Determination of total bromide as inorganic bromide) |
| BS EN 13191-2-2000 |
清淡食物.溴化物殘留量的測定.無機溴化物含量的測定 |
(Non-fatty food - Determination of bromide residues - Determination of inorganic bromide) |
| BS EN 13192-2002 |
無損檢驗.泄漏試驗.參考漏汽量的校準 |
(Non-destructive testing - Leak testing - Calibration of reference leaks for gases) |
| BS EN 13193-2000 |
包裝.包裝和環境.術語 |
(Packaging - Packaging and the environment - Terminology) |
| BS EN 13194-2000 |
人類飲用水處理用化學品.乙酸 |
(Chemicals used for treatment of water intended for human consumption - Acetic acid) |
| BS EN 13195-1-2002 |
鋁和鋁合金.海運(造船業,海運和近海工程)用煅制和鑄造產品 |
(Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Specifications) |
| BS EN 13196-2000 |
果汁和蔬菜汁.蒸餾法測定二氧化硫總量 |
(Fruit and vegetable juices - Determination of total sulfur dioxide by distillation) |
| BS EN 13197-2001 |
道路標記材料.磨損模仿器 |
(Road marking materials - Wear simulators) |
| BS EN 13198-2003 |
預制混凝土產品.道路公共設施和公園用品 |
(Precast concrete products - Street furniture and garden products) |
| BS EN 13199-1-2000 |
包裝.低負荷載運系統.通用要求和試驗方法 |
(Packaging - Small load carrier systems - Common requirements and test methods) |
| BS EN 13199-2-2000 |
包裝.低負荷載運系統.柱形疊架制(CSS) |
(Packaging - Small load carrier systems - Column Stackable System (CSS)) |
| BS EN 13199-3-2000 |
包裝.低負荷載運系統.聯結式疊架制(BSS) |
(Packaging - Small load carrier systems - Bond Stackable System (BSS)) |
| BS EN 132-1999 |
墻掛式洗手盆.術語和圖形的定義 |
(Respiratory protective devices - Definitions of terms and pictograms) |
| BS EN 1320-1997 |
金屬材料焊接的破壞試驗.斷裂試驗 |
(Destructive tests on welds in metallic materials - Fracture tests) |
| BS EN 13200-1-2004 |
觀眾設施.觀看席位布局標準.規范 |
|
| BS EN 13201-2-2003 |
道路照明.性能要求 |
(Road lighting - Performance requirements) |
| BS EN 13201-3-2003 |
道路照明.性能計算 |
(Road lighting - Calculation of performance) |
| BS EN 13201-4-2003 |
道路照明.照明性能的測量方法 |
(Road lighting - Methods of measuring lighting performance) |
| BS EN 13202-2000 |
熱環境的人類工效學.可接觸表面的溫度.輔助以EN 563確定產品標準中表面溫度限值的指南 |
Ergonomics of the thermal environment - Temperatures of touchable hot surfaces - Guidance for establishing surface temperature limit values in product standards with the aid of EN 563 |
| BS EN 13205-2002 |
工作場所空氣.氣載粒子濃度測量用儀器的性能評定 |
Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations |
| BS EN 13206-2001 |
農業和園藝業用覆蓋熱塑膜 |
(Covering thermoplastic films for use in agriculture and horticulture) |
| BS EN 13207-2001 |
青儲飼料熱塑膜 |
Silage thermoplastic films |
| BS EN 13208-2003 |
食品加工機械.蔬菜去皮機.安全和衛生要求 |
(Food processing machinery - Vegetable peelers - Safety and hygiene requirements) |
| BS EN 13209-1-2004 |
兒童使用和護理用品.嬰兒運載工具.安全要求和檢驗方法.后向有框架的運載工具 |
|
| BS EN 1321-1997 |
金屬材料焊接的破壞試驗.焊接的宏觀和微觀檢驗 |
Destructive test on welds in metallic materials - Macroscopic and microscopic examination of welds |
| BS EN 13210-2004 |
兒童使用和護理用品.兒童背帶、學步繩和類似物品.安全要求和檢驗方法 |
|
| BS EN 132100-1997 |
電子件質量評定的協調系統.分規范:固定的多層陶瓷表面鑲嵌電容器.評估級別EZ和DZ |
Harmonized system of quality assessment for electronic components - Sectional specification: fixed mulitlayer ceramic surface mounting capacitors - Assessment levels EZ and DZ |
| BS EN 132101-1997 |
空白詳細規范.固定式多層陶瓷電容器.評估級別EZ |
Blank detail specification - Fixed multilayer ceramic surface mounting capacitors - Assessment level EZ |
| BS EN 132102-1997 |
空白詳細規范.固定的多層陶瓷表面鑲嵌電容器.評估級別DZ |
Blank detail specification - Fixed multilayer ceramic surface mounting capacitors - Assessment level DZ |
| BS EN 13211-2001 |
空氣質量.固定源排放.所有汞濃度測定的人工方法 |
(Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury) |
| BS EN 13212-2001 |
道路標記材料.工廠生產控制的要求 |
(Road marking materials - Requirements for factory production control) |
| BS EN 13213-2001 |
空心地板 |
Hollow floors |
| BS EN 13214-2001 |
熱噴涂.熱噴涂協調.目標和責任 |
Thermal spraying - Thermal spray coordination - Tasks and responsibilities |
| BS EN 13215-2000 |
制冷用冷凝裝置.標稱條件、公差和廠商性能數據的表示 |
(Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer’s performance data) |
| BS EN 13216-1-2004 |
煙囪.系統煙囪的試驗方法.一般試驗方法 |
|
| BS EN 13218-2002 |
機床安全.固定式磨床 |
(Machine tools - Safety - Stationary grinding machines) |
| BS EN 13219-2001 |
體操設備.蹦床.功能和安全要求及試驗方法 |
(Gymnastic equipment - Trampolines - Functional and safety requirements, test methods) |
| BS EN 13220-1999 |
與醫用氣體管道系統的終端件相連接的流量計裝置 |
(Flow-metering devices for connection to terminal units of medical gas pipeline systems) |
| BS EN 13223-2004 |
載人用索道裝置的安全要求.傳動設備和其他機械設備 |
|
| BS EN 13225-2004 |
預澆鑄混凝土產品.線性結構部件 |
|
| BS EN 13226-2003 |
木地板.帶舌和/或榫的實木拼花地板構件 |
(Wood flooring - Solid parquet elements with grooves and/or tongues) |
| BS EN 13227-2003 |
木地板.實木拼花地板制品 |
(Wood flooring - Solid lamparquet products) |
| BS EN 13228-2003 |
木地板.包括帶聯鎖系統的地板塊的實木貼面地板構件 |
(Wood flooring - Solid wood overlay flooring elements including blocks with an interlocking system) |
| BS EN 13229-2001 |
固體燃料燃燒的包括開放火苗的嵌入物應用 |
(Inset appliances including open fires fired by solid fuels - Requirements and test methods) |
| BS EN 1323-1999 |
磁磚膠粘劑.試驗用混凝土厚板材 |
(Adhesives for tiles - Concrete slab for test) |
| BS EN 13230-1-2002 |
鐵路設施.軌道.混凝土軌枕和支承件.一般要求 |
(Railway applications - Track - Concrete sleepers and bearers - General requirements) |
| BS EN 13230-2-2002 |
鐵路設施.軌道.混凝土軌枕和支承件.預應力整體軌枕 |
(Railway applications - Track - Concrete sleepers and bearers - Prestressed monoblock sleepers) |
| BS EN 13230-3-2002 |
鐵路設施.軌道.混凝土軌枕和支承件.雙體加筋軌枕 |
(Railway applications - Track - Concrete sleepers and bearers - Twin-block reinforced sleepers) |
| BS EN 13230-4-2002 |
鐵路設施.軌道.混凝土軌枕和支承件.道岔和交叉用預應力支承件 |
(Railway applications - Track - Concrete sleepers and bearers - Prestressed bearers for switches and crossings) |
| BS EN 13230-5-2002 |
鐵路設施.軌道.混凝土軌枕和支承件.特殊要素 |
(Railway applications - Track - Concrete sleepers and bearers - Special elements) |
| BS EN 13232-1-2003 |
鐵路設施.軌道.鐵路側線和道岔口.定義 |
(Railway applications - Track - Switches and crossings - Definitions) |
| BS EN 13232-2-2003 |
鐵路設施.軌道.鐵路側線和道岔口.幾何設計要求 |
(Railway applications - Track - Switches and crossings - Requirements for geometric design) |
| BS EN 13232-3-2003 |
鐵路設施.軌道.鐵路側線和道岔口.車輪/鋼軌相互作用要求 |
(Railway applications - Track - Switches and crossings - Requirements for wheel/rail interaction) |
| BS EN 13232-4-2005 |
鐵路設施.軌道.鐵道側線和道岔口.驅動、鎖緊和檢測 |
|
| BS EN 13232-5-2005 |
鐵路設施.軌道.鐵道側線和道岔口.鐵道側線 |
|
| BS EN 13232-6-2005 |
鐵路設施.軌道.鐵道側線和道岔口.固定式普通和鈍角道叉口 |
|
| BS EN 13236-2001 |
超級磨料的安全要求 |
Safety requirements for superabrasives |
| BS EN 13237-2003 |
潛在爆炸性環境.潛在爆炸性環境用設備和保護系統的術語和定義 |
(Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres) |
| BS EN 13238-2001 |
建筑產品在火災試驗中的反應.襯底選擇的條件方法和通則 |
(Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates) |
| BS EN 1324-1999 |
磁磚膠粘劑.分散膠粘劑剪切強度的測定 |
(Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives) |
| BS EN 13240-2001 |
使用固體燃料的室內加熱器.要求和試驗方法 |
(Roomheaters fired by solid fuel - Requirements and test methods) |
| BS EN 132400-1995 |
電子器件質量評定協調體系.分規范.固定電容器電磁干擾抑制和與供電電源的連接(評定級D) |
(Harmonized system of quality assessment for electronic components - Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (Assessme) |
| BS EN 132401-1995 |
電子器件質量評定協調體系規范.空白詳細規范.適合與網絡用電磁干擾的固定電容器(質量認證等級D) |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fixed capacitors for electromagnetic interference suppression and connection to supply) |
| BS EN 13241-1-2003 |
工業、商業和車庫門及大門.產品標準.不耐火產品或具有煙控特性的產品 |
(Industrial, commercial and garage doors and gates - Product standard - Products without fire resistance or smoke control characteristics) |
| BS EN 13242-2002 |
民用工程和道路建筑用非結合的和液壓結合材料用集料 |
(Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction) |
| BS EN 132421-1997 |
電子器件質量評定協調體系.空白詳細規范:抑制電磁干擾用固定電容器.安全試驗用電容器(只要求安全試驗) |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed capacitors for electromagnetic interference suppression - Capacitors for which safety tests are re) |
| BS EN 13243-2004 |
載人用索道裝置的安全要求.傳動系統以外的電氣設備 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com