標準號 |
中文名稱 |
英文名稱 |
| BS 5212-3-1990 |
混凝土路面冷施填封劑裝置.第3部分:試驗方法 |
(Cold applied joint sealant systems for concrete pavements - Methods of test) |
| BS 5213-1975 |
微生物學用醫療樣品容器規范 |
(Specification for medical specimen containers for microbiology) |
| BS 5214-2-1978 |
橡膠和塑料試驗機規范.第2部分:恒速施力機 |
(Specification for testing machines for rubbers and plastics - Constant rate of force application machines) |
| BS 5215-1986 |
單一組分噴槍級聚合硫化物基密封膠規范 |
(Specification for one-part gun grade polysulphide-based sealants) |
| BS 5218-1989 |
木材防腐劑.用幼蟲轉移法(實驗室法)測定抗家具竊蠹(De Geer)的毒素值 |
(Wood preservatives - Determination of the toxic values against Anobium punctatum (De Geer) by larval transfer (laboratory method)) |
| BS 5219-1975 |
木材防腐劑.測定對Hylotrupes bajulus(Linnaeus)幼蟲的殺滅能力(實驗室法) |
(Wood preservatives - Determination of eradicant action against Hylotrupes bajulus (Linnaeus) larvae (laboratory method)) |
| BS 5221-1987 |
米制模數齒輪滾刀通用規范 |
Specification for general purpose, metric module gear hobs |
| BS 5223-2-1999 |
醫院床位規范.燃燒改型,軟聚氨酯,一般用途的泡沫床墊芯,規范 |
(Specification for hospital bedding - Combustion modified, flexible polyurethane, general purpose foam mattress cores - Specification) |
| BS 5223-3-1976 |
醫院用床褥規范.第3部分:聚氨基甲酸乙脂軟枕頭 |
Specification for hospital bedding - Flexible polyurethane pillows |
| BS 5223-4-1976 |
醫院用床褥規范.第4部分:覆蓋尼龍的聚氨基甲酸乙酯的床墊罩 |
Specification for hospital bedding - Mattress covers of polyurethane coated nylon |
| BS 5224-1995 |
圬工用水泥規范 |
Specification for masonry cement |
| BS 5225 Pt.1-1975 |
燈具的光度數據.光度測量 |
Photometric data for luminaires. Photometric measurements |
| BS 5225-1-1975 |
燈具的光度數據.光度測定方法 |
Photometric data for luminaires - Photometric measurements |
| BS 5225-3-1982 |
燈具的光度數據.第3部分:電池供電的應急照明燈具的光度測定方法 |
Photometric data for luminaires - Method of photometric measurement of battery-operated emergency lighting luminaires |
| BS 5226-1991 |
擠奶機械安裝清洗和消毒用設備和工序的實施規程 |
Code of practice for equipment and procedures for the cleaning and disinfecting of milking machine installations |
| BS 5228-1-1997 |
建筑工地和露天場地的噪聲和振動控制.噪聲和振動控制基本信息和程序的實施規程 |
Noise and vibration control on construction and open sites - Code of practice for basic information and procedures for noise and vibration control |
| BS 5228-2-1997 |
建筑工地和露天場地的噪聲和振動控制.施工和拆除(包括道路修筑和維修)的噪聲和振動控制立法指南 |
Noise and vibration control on construction and open sites - Guide to noise and vibration control legislation for construction and demolition including road construction and maintenance |
| BS 5228-3-1997 |
建筑工地和露天場地的噪聲和振動控制.適用于以露天開采法開采地表煤的實用指南 |
Noise and vibration control on construction and open sites - Code of practice applicable to surface coal extraction by opencast methods |
| BS 5228-4-1992 |
建筑工地和露天場地的噪聲控制.打樁作業噪聲和振動控制實用規程 |
Noise and vibration control on construction and open sites - Code of practice for noise and vibration control applicable to piling operations |
| BS 5228-5-1997 |
結構和開采點噪聲和振動控制.適用于表層礦石開采點(除煤炭外)的實施規范 |
Noise and vibration control on construction and open sites - Code of practice applicable to surface mineral extraction (except coal) sites |
| BS 5229-1975 |
地毯絨頭拔出力的測定方法 |
Method for determination of tuft withdrawal force of carpets |
| BS 5233-1986 |
計量學名詞術語詞匯(結合 BS 2643) |
Glossary of terms used in metrology (incorporating BS 2643) |
| BS 5234-1-1992 |
隔墻.(包括覆面板)第1部分:設計和安裝的實用規程 |
Partitions (including matching linings) - Code of practice for design and installation |
| BS 5234-2-1992 |
隔墻(包括覆面板).第2部分:包括試驗方法在內的隔墻強度和堅固性能要求規范 |
Partitions (including matching linings) - Specification for performance requirements for strength and robustness including methods of test |
| BS 5235-1975 |
度盤型膨脹式溫度計規范 |
Specification for dial-type expansion thermometers |
| BS 5237-1985 |
起重旋鎖裝置規范 |
(Specification for lifting twistlocks) |
| BS 5241-1-1994 |
建筑工地上涂覆或噴涂用的硬聚氯酯泡沫塑料.第1部分:外部施覆的隔熱泡沫塑料 |
(Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site - Specification for sprayed foam thermal insulation applied externally) |
| BS 5241-2-1991 |
施工現場配制與噴涂用硬聚氨酯和聚異三聚氰脲酸酯泡沫塑料.第2部分:熱絕緣或彈性配制泡沫塑料的規范 |
(Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site - Specification for dispensed foam for thermal insulation or buoyancy applications) |
| BS 5242-1-1987 |
液力氣缸筒用管.第1部分:精鏜鋼管 |
(Tubes for fluid power cylinder barrels - Specification for steel tubes with specially finished surfaces) |
| BS 5242-2-1983 |
液力氣缸筒用管.第2部分:精鏜有色金屬管規范 |
(Tubes for fluid power cylinder barrels - Specification for non-ferrous metallic tubes with specially finished bores) |
| BS 5243-1975 |
空氣中放射性物質取樣的一般原則 |
(General principles for sampling airborne radioactive materials) |
| BS 5244-1986 |
液壓橡膠軟管及其配件的應用、貯藏及使用壽命推薦標準 |
Recommendations for application, storage and life expiry of hydraulic rubber hoses and hose assemblies |
| BS 5245-1975 |
不銹鋼軟釬焊接頭用的磷酸基助焊劑 |
(Specification for phosphoric acid based flux for soft soldered joints in stainless steel) |
| BS 5246-1976 |
正齒輪插齒刀規范.1至8米制模數 |
(Specification for pinion type cutters for spur gears - 1 to 8 metric module) |
| BS 5248-1990 |
通風濕度表規范 |
(Specification for aspirated hygrometer) |
| BS 5249-2-1978 |
通過數據處理系統進行交換的數據單表示法規范.人類性別的表示法 |
(Specification for representation of elements of data in interchanges using data processing systems - Representation of human sexes) |
| BS 5249-3-1983 |
通過數據處理系統進行交換的數據單表示法規范.地理觀測點位置的經度、緯度和高度表示方法 |
(Representation of elements of data in interchanges using data processing systems - Specification for representation of latitude, longitude and altitude for geographical point locations) |
| BS 525-1991 |
鋼絲繩用纖維芯規范 |
Specification for fibre cores for wire ropes |
| BS 5250-2002 |
建筑物內冷凝控制實施規程 |
Code of practice for control of condensation in buildings |
| BS 5251-1975 |
電源控制的核儀表的模擬電壓范圍和邏輯電平規范 |
Specification for analogue voltage ranges and logic levels for mains operated nuclear instruments |
| BS 5252-1976 |
建筑用顏色配合格局 |
(Framework for colour co-ordination for building purposes) |
| BS 5252F-1976 |
建筑用顏色配合格局.顏色配合扇 |
Colour matching fan |
| BS 5257-1975 |
臥式端吸離心泵(16bar)規范 |
Specification for horizontal end-suction centrifugal pumps (16 bar) |
| BS 5258-2-1975 |
家用燃?xì)庠O(shè)備的安全性能.烹飪?cè)O(shè)備 |
Safety of domestic gas appliances - Cooking appliances |
| BS 5258-8-1980 |
家用燃?xì)庠O(shè)備的安全性能.組合設備:燃?xì)?廢氣爐規范 |
Safety of domestic gas appliances - Combined appliances: gas fire/back boiler |
| BS 5258-9-1989 |
家用燃?xì)庠O(shè)備的安全性能.第9部分:組合式器具:扇形循環抽氣導水加熱器/循環器規范 |
Safety of domestic gas appliances - Specification for combined appliances: fanned-circulation ducted-air heaters/circulators |
| BS 5260-1975 |
船舶裝備無線電干擾抑止實施規程 |
Code of practice for radio interference suppression on marine installations |
| BS 5261-1-2000 |
底稿的編寫和校樣修改.文件的設計和布局 |
Copy preparation and proof correction - Design and layout of documents |
| BS 5261-2-1976 |
底稿的編寫和校樣修改.第2部分:底稿編寫、校樣修改和校對程序的印刷要求和標志規程 |
(Copy preparation and proof correction - Specification for typographic requirements, marks for copy preparation and proof correction, proofing procedure) |
| BS 5261-2-2005 |
底稿的編寫和校樣修改.印刷要求、底稿編寫和校樣修改的標記、校樣過程的規范 |
|
| BS 5261-3-1989 |
底稿編寫和校樣修改.第3部分:數學底稿編寫和數學校樣修改標志及其用法規范 |
Copy preparation and proof correction - Specification for marks for mathematical copy preparation and mathematical proof correction and their uses |
| BS 5261C-1976 |
底稿的編寫和校樣修改.底稿編寫和校樣修改標志(摘自BS 5261-2-1976) |
Copy preparation and proof correction - Marks for copy preparation and proof correction (extracted from BS 5261-2:1976) |
| BS 5261C-2005 |
底稿的編寫和校樣修改.底稿的編寫和校樣修改的標記(摘于BS 5261-2-2005) |
|
| BS 5262-1991 |
外部粉刷實用規程 |
Code of practice for external renderings |
| BS 5263-1975 |
液體介質取樣方法 |
(Method for sampling liquid dielectrics) |
| BS 5266-1-1999 |
應急照明設備.除電影院之外的場所以及其它某些規定的娛樂場所的應急照明設備的實施規范 |
(Emergency lighting - Code of practice for the emergency lighting of premises other than cinemas and certain other specified premises used for entertainment) |
| BS 5266-2-1998 |
應急照明設備.應急用低安裝方式的電氣制導系統實施規程 |
(Emergency lighting - Code of practice for electrical low mounted way guidance systems for emergency use) |
| BS 5266-3-1981 |
應急照明.第3部分:電流小于和等于32A的應急照明用小型電力繼電器(電磁型) |
(Emergency lighting - Specification for small power relays (electromagnetic) for emergency lighting applications up to and including 32 A) |
| BS 5266-4-1999 |
應急照明設備.光纖系統的設計、安裝、維護和使用的實施規范 |
(Emergency lighting - Code of practice for design, installation, maintenance and use of optical fibre systems) |
| BS 5266-5-1999 |
應急照明設備.光纖系統的部件規范 |
Emergency lighting - Specification for component parts of optical fibre systems |
| BS 5266-6-1999 |
應急照明設備.應急用低安裝方式的非電氣制導系統實施規程 |
Emergency lighting - Code of practice for non-electrical low mounted way guidance systems for emergency use - Photoluminescent systems |
| BS 5268-2-2002 |
建筑用木材.允許應力設計、材料和工藝實施規范 |
Structural use of timber - Code of practice for permissible stress design, materials and workmanship |
| BS 5268-3-1998 |
建筑用圓木.屋架用屋頂椽子的操縱規程 |
Structural use of timber - Code of practice for trussed rafter roofs |
| BS 5268-4.1-1978 |
建筑用木材.第4部分:木結構的耐火性.第1節:木構件的耐火性計算推薦規范 |
Structural use of timber - Fire resistance of timber structures - Recommendations for calculating fire resistance of timber members |
| BS 5268-4.2-1990 |
建筑用木材.第4部分:木結構的耐火性.第2節:木螺栓墻和格柵樓板結構的耐火性計算推薦規范 |
Structural use of timber - Fire resistance of timber structures - Recommendations for calculating fire resistance of timber stud walls and joisted floor constructions |
| BS 5268-5-1989 |
建筑用木材.第5部分:結構木材防腐處理實用規程 |
Structural use of timber - Code of practice for the preservative treatment of structural timber |
| BS 5268-6.1-1996 |
建筑用木材.第6部分:木材架實用規程.不超過四層的住宅 |
Structural use of timber - Code of practice for timber frame walls - Dwellings not exceeding four storeys |
| BS 5268-6.2-2001 |
結構用木材.木構架墻實用規程.不超過四層的住宅除外的建筑物 |
Structural use of timber - Code of practice for timber frame walls - Buildings other than dwellings not exceeding four storeys |
| BS 5268-7.1-1989 |
建筑用木材.第7部分:以指距表為計算基準的推薦方法.第1節:家用樓板擱柵 |
Structural use of timber - Recommendations for the calculation basis for span tables - Domestic floor joists |
| BS 5268-7.2-1989 |
建筑用木材.第7部分:以指距表為計算基準的推薦方法.第2節:平屋頂用擱柵 |
Structural use of timber - Recommendations for the calculation basis for span tables - Joists for flat roofs |
| BS 5268-7.3-1989 |
建筑用木材.以指距表為計算基準的推薦方法.頂棚格柵 |
Structural use of timber - Recommendations for the calculation basis for span tables - Ceiling joists |
| BS 5268-7.4-1989 |
建筑用木材.頂棚粘結料 |
Structural use of timber - Ceiling binders |
| BS 5268-7.5-1990 |
建筑用木材.第7部分:以指距表為計算基準的推薦方法.第5節:家用椽子 |
Structural use of timber - Recommendations for the calculation basis for span tables - Domestic rafters |
| BS 5268-7.6-1990 |
建筑用木材.第7部分:以指距表為計算基準的推薦方法.第6節:檁條支承椽 |
Structural use of timber - Recommendations for the calculation basis for span tables - Purlins supporting rafters |
| BS 5268-7.7-1990 |
建筑用木材.第7部分:以指距表為計算基準的推薦方法.第7節:檁條支撐擋板或蓋板 |
Structural use of timber - Recommendations for the calculation basis for span tables - Purlins supporting sheeting or decking |
| BS 5270-1-1989 |
與熟石膏和水泥一起使用的建筑化學劑.第1部分:與建筑用熟石膏一起在室內使用的聚乙酸乙烯酯(PVAC) |
Bonding agents for use with gypsum plasters and cement - Specification for polyvinyl acetate (PVAC) emulsion bonding agents for indoor use with gypsum building plasters |
| BS 5271-1988 |
工業用低壓開關和控制器規范.近距離電感開關.工作距離和工作頻率的測量方法 |
Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Methods for measuring the operating distance and operating frequency |
| BS 5272-1975 |
一批奶粉試樣水含量的同時常規測定法 |
Method for simultaneous routine determination of the water contents of a batch of dried milk samples |
| BS 5273-1975 |
道路及其他鋪筑面用密級配焦油瀝青面層規范 |
Specification - Dense tar surfacing for roads and other paved areas |
| BS 5276-1-1984 |
壓力容器詳細規格(尺寸).第1部分:鋼容器支管蓋吊桿規范 |
Pressure vessel details (dimensions) - Specification for davits for branch covers of steel vessels |
| BS 5276-2-2003 |
壓力容器細則(尺寸).臥式圓柱形壓力容器鞍式支座規范 |
(Pressure vessel details (dimensions) - Specification for saddle supports for horizontal cylindrical pressure vessels) |
| BS 5276-4-1977 |
壓力容器詳細規格(尺寸).標準化壓力容器 |
(Pressure vessel details (dimensions) - Standardized pressure vessels) |
| BS 5277-1976 |
門.門扇一般平直度缺陷的測量 |
(Doors - Measurement of defects of general flatness of door leaves) |
| BS 5279-1976 |
土方機械加油孔的尺寸規范 |
(Specification for dimensions of fuel filler openings of earth-moving machinery) |
| BS 5281-1975 |
鋼絲繩用保險箍眼終端規范 |
(Specification for ferrule-secured eye terminations for wire ropes) |
| BS 5283-1986 |
消毒劑的名詞術語詞匯 |
(Glossary of terms relating to disinfectants) |
| BS 5284-1993 |
建筑和土木工程用砂膠瀝青的取樣和試驗方法 |
(Methods of sampling and testing mastic asphalt used in building and civil engineering) |
| BS 5285-1975 |
非工業用交流電風扇及調節器的性能規范 |
(Specification - Performance of a.c. electric ventilating fans and regulators for non-industrial use) |
| BS 5286-1978 |
鋁框滑動玻璃門規范 |
(Specification for aluminium framed sliding glass doors) |
| BS 5287-1988 |
按BS 4790試驗的鋪地織物的評定和標記規范 |
(Specification for assessment and labelling of textile floor coverings tested to BS 4790) |
| BS 5288-1976 |
密封放射源規范 |
(Specification - Sealed radioactive sources) |
| BS 5293-1-1990 |
橡膠工業用炭黑的取樣和試驗.取樣方法 |
(Sampling and testing carbon black for use in the rubber industry - Methods of sampling) |
| BS 5293-10-2001 |
橡膠工業用碳黑取樣和試驗.碘吸收值的測定方法 |
(Sampling and testing carbon black for use in the rubber industry - Method for determination of iodine absorption number) |
| BS 5293-11-1995 |
橡膠工業用碳黑取樣和試驗.單點氮吸收特定表面的測定方法 |
(Sampling and testing carbon black for use in the rubber industry - Method for determination of specific surface area by nitrogen adsorption methods using single-point procedures) |
| BS 5293-12-1996 |
橡膠工業用炭黑的取樣和試驗方法.第12部分:用表面活性劑吸附的表面積測定法 |
(Sampling and testing carbon black for use in the rubber industry - Methods for determination of surface area by surfactant adsorption) |
| BS 5293-13-1995 |
橡膠工業用炭黑的取樣和試驗.著色力的測定方法 |
(Sampling and testing carbon black for use in the rubber industry - Method for determination of tinting strength) |
| BS 5293-14-1991 |
橡膠工業用炭黑的取樣和試驗.甲苯萃取物透光度的測定方法(快速法) |
(Sampling and testing carbon black for use in the rubber industry - Method for determination of light transmittance of toluene extract (rapid method)) |
| BS 5293-15-1991 |
橡膠工業用炭黑的取樣和試驗.產品鑒定用甲苯萃取物透光度的測定方法 |
(Sampling and testing carbon black for use in the rubber industry - Method for determination of light transmittance of toluene extract for product evaluation) |
| BS 5293-16-1990 |
橡膠工業用炭黑的取樣和試驗.溶劑萃取物的測定方法 |
(Sampling and testing carbon black for use in the rubber industry - Method for determination of solvent extractable material) |
| BS 5293-17-1993 |
橡膠工業用炭黑的取樣和試驗方法.第17部分:用液體溶氣計測定鄰苯二甲酸二丁酯吸收值的方法 |
(Sampling and testing carbon black for use in the rubber industry - Method for determination of dibutyl phthalate absorption number using an absorptometer) |
| BS 5293-18-1992 |
橡膠工業用炭黑的取樣和試驗.第18部分:利用塑性變形記錄儀或塑度計測定酞酸二丁酯(增濕劑)吸收系數的方法 |
(Sampling and testing carbon black for use in the rubber industry - Method for determination of dibutyl phthalate absorption number using plastograph or plasticorder) |
| BS 5293-19-1991 |
橡膠工業用炭黑的取樣和試驗方法.用于測定鄰苯二甲酸二丁酯吸收數的樣品制備(壓縮樣品) |
(Sampling and testing carbon black for use in the rubber industry - Preparation of samples for determination of dibutyl phthalate absorption number (compressed sample)) |
| BS 5293-1991 |
橡膠工業用炭黑的取樣和試驗.第19部分:測定二丁基鄰苯二甲酸酯吸收數值的樣品的制備(壓縮取樣) |
(Sampling and testing carbon black for use in the rubber industry. Preparation of samples for determination of dibutyl phthalate absorption number (compressed sample)) |
| BS 5293-2-1996 |
橡膠工業用炭黑的取樣和試驗方法.第2部分:傾瀉密度測定方法 |
(Sampling and testing carbon black for use in the rubber industry - Method for determination of pour density) |
| BS 5293-20-1992 |
橡膠工業用炭黑的取樣和試驗方法.第20部分:丁苯橡膠的評價方法 |
(Sampling and testing carbon black for use in the rubber industry - Method for evaluation in styrene-butadiene rubbers) |
| BS 5293-21-1995 |
橡膠工業用碳黑的試驗和取樣.第21部分:橡膠制品用碳黑的分類系統 |
(Sampling and testing carbon black for use in the rubber industry - Classification system for carbon blacks used in rubber products) |
| BS 5293-3-1996 |
橡膠工業用炭黑的取樣和試驗方法.第3部分:料末含量的測定方法 |
(Sampling and testing carbon black for use in the rubber industry - Method for determination of fines content) |
| BS 5293-4-1996 |
橡膠工業用炭黑的取樣和試驗方法.第4部分:粒料尺寸分布的測定方法 |
(Sampling and testing carbon black for use in the rubber industry - Method for determination of pellet size distribution) |
| BS 5293-5-1992 |
橡膠工業用炭黑的取樣和試驗方法.第5部分:灼燒失重的測定方法 |
(Sampling and testing carbon black for use in the rubber industry - Method for determination of loss of mass on heating) |
| BS 5293-6-1992 |
橡膠工業用炭黑的取樣和試驗方法.第6部分:篩渣的測定方法 |
(Sampling and testing carbon black for use in the rubber industry - Method for determination of sieve residue) |
| BS 5293-7-2001 |
橡膠工業用碳黑取樣和試驗.灰分含量的測定方法 |
(Sampling and testing carbon black for use in the rubber industry - Method for determination of ash content) |
| BS 5293-8-1996 |
橡膠工業用炭黑的取樣和試驗.第8部分:塵埃含量的測定 |
(Sampling and testing carbon black for use in the rubber industry - Method for determination of dust content) |
| BS 5295-0-1989 |
封閉空間的環境清潔度.第0部分:凈室和凈化空氣裝置的一般介紹、術語和定義 |
(Environmental cleanliness in enclosed spaces - General introduction, terms and definitions for clean rooms and clean air devices) |
| BS 5295-3-1989 |
封閉空間的環境清潔度.第3部分:凈室和凈化空氣裝置適用的操作規程與規定的指南 |
(Environmental cleanliness in enclosed spaces - Guide to operational procedures and disciplines applicable to clean rooms and clean air devices) |
| BS 5305-1984 |
乳品工業中工廠與設備的清潔和消毒實用規程 |
(Code of practice for cleaning and disinfecting of plant and equipment used in the dairying industry) |
| BS 5306-0-1986 |
住房用滅火裝置及設備.第0部分:固定滅火系統和其它滅火裝置選擇指南 |
(Fire extinguishing installations and equipment on premises - Guide for the selection of installed systems and other fire equipment) |
| BS 5306-2-1990 |
房屋用滅火裝置及設備.灑水滅火系統規范 |
(Fire extinguishing installations and equipment on premises - Specification for sprinkler systems) |
| BS 5306-3-2003 |
住房用滅火裝置及設備.便攜式滅火器的檢驗和維修實施規范 |
(Fire extinguishing installations and equipment on premises - Code of practice for the inspection and maintenance of portable fire extinguishers) |
| BS 5306-4-2001 |
住房用滅火裝置及設備.二氧化碳系統規范 |
(Fire extinguishing installations and equipment on premises - Specification for carbon dioxide systems) |
| BS 5306-5.1-1992 |
房屋用滅火裝置及設備的實用規程.鹵化物滅火系統.鹵化物1301全溢式系統 |
(Code of practice for fire extinguishing installations and equipment on premises - Halon systems - Specification for halon 1301 total flooding systems) |