標準號 |
中文名稱 |
英文名稱 |
| BS 4193-15-1986 |
鑲硬質合金刀具.第15部分:無固定孔的可轉位刮棱硬質合金刀片的尺寸規范 |
(Hardmetal insert tooling - Specification for dimensions for indexable hardmetal (carbide) inserts with wiper edges but without fixing hole) |
| BS 4193-16-1986 |
鑲硬質合金刀具.第16部分:可轉位刀片用柄式銑刀命名規范 |
(Hardmetal insert tooling - Specification for designation of shank type milling cutters for indexable inserts) |
| BS 4193-17-1989 |
鑲硬質合金刀具.第17部分:可轉位刀片用膛孔型銑刀命名規范 |
(Hardmetal insert tooling - Specification for designation of bore type milling cutters for indexable inserts) |
| BS 4193-18-1999 |
硬質合金刀具.可轉位刀片用鉆桿的尺寸規格 |
(Hardmetal insert tooling - Specification for dimensions of boring bars for indexable inserts) |
| BS 4193-19-1993 |
鑲硬質合金刀具.無固定孔圓角可轉位陶瓷刀片尺寸規范 |
(Hardmetal insert tooling - Specification for dimensions of indexable ceramic inserts with rounded corners without fixing hole) |
| BS 4193-1993 |
鑲硬質合金刀具.第19部分:無固定孔圓角可轉位陶瓷刀片尺寸規范 |
(Hardmetal insert tooling. Specification for dimensions of indexable ceramic inserts with rounded corners without fixing hole) |
| BS 4193-2-1986 |
鑲硬質合金刀具.第2部分:無固定孔的圓角可轉位硬質合金(碳化物)刀片尺寸規范 |
(Hardmetal insert tooling - Specification for dimensions for indexable hardmetal (carbide) inserts with rounded corners, without fixing hole) |
| BS 4193-20-1993 |
鑲硬質合金刀具.第20部分:有固定孔圓角可轉位陶瓷刀片尺寸的規范 |
(Hardmetal insert tooling - Specification for dimensions of ceramic inserts with rounded corners with fixing hole) |
| BS 4193-21-1993 |
鑲硬質合金刀具.第21部分:帶可轉位硬質合金鑲?cè)械闹北@頭規范 |
(Hardmetal insert tooling - Specification for cylindrical shanks with a parallel flat for drills with indexable inserts) |
| BS 4193-22-1996 |
有斷屑器的分度刀片的近似切屑控制范圍的分類和設計 |
(Hardmetal insert tooling - Classification and designation of approximate chip control zones for indexable inserts with chipbreakers) |
| BS 4193-3-1997 |
鑲硬質合金刀具.有圓柱圓定孔和圓角可轉位硬質合金(碳化物)刀片尺寸規范 |
(Hardmetal insert tooling - Specification for dimensions of indexable hardmetal (carbide) inserts with rounded corners and with cylindrical fixing hole) |
| BS 4193-6-1997 |
鑲硬質合金刀具.第6部分:可轉位(多刃)刀片用旋轉夾和仿形刀夾及卡盤的命名規范 |
(Hardmetal insert tooling - Specification for the designation of turning and copying tool holders and cartridges for indexable (throwaway) inserts) |
| BS 4193-7-1999 |
硬質合金刀具.可轉位刀片車削和仿形用單刃刀具夾持器.尺寸 |
(Hardmetal insert tooling - Single point tool holders for turning and copying for indexable inserts - Dimensions) |
| BS 4193-8-1997 |
鑲硬質合金刀具.第8部分:可轉位(多刃)刀用A 型卡盤的尺寸規范 |
(Hardmetal insert tooling - Specification for dimensions for type A cartridges for indexable (throwaway) inserts) |
| BS 4193-9-1982 |
鑲硬質合金刀具.第9部分:帶可轉位刀片和扁平直柄的端銑刀規范 |
(Hardmetal insert tooling - Specification for end mills with indexable inserts and flatted parallel shank) |
| BS 4198-1967 |
響度計算方法 |
(Method for calculating loudness) |
| BS 4203-1-1980 |
擠塑硬聚氯乙烯瓦楞板.第1部分:性能要求規范 |
(Extruded rigid PVC corrugated sheeting - Specification for performance requirements) |
| BS 4203-2-1980 |
擠塑硬聚氯乙烯瓦楞板.第2部分:外形和尺寸規范 |
(Extruded rigid PVC corrugated sheeting - Specification for profiles and dimensions) |
| BS 4204-1989 |
承壓鋼管的閃光焊規范 |
(Specification for flash welding of steel tubes for pressure applications) |
| BS 4207-1990 |
鋼制煙囪和煙道整體襯砌層安裝的實用規范 |
(Code of practice for the installation of monolithic linings for steel chimneys and flues) |
| BS 4211-1994 |
煙囪、筒倉、存斗和其它高建筑物攀登用永久性梯子規范 |
(Specification for ladders for permanent access to chimneys, other high structures, silos and bins) |
| BS 4213-1991 |
容量500L以下家用冷水貯水和混合供水與膨脹水箱(聚烯烴或烯烴共聚物)規范 |
(Specification for cold water storage and combined feed and expansion cisterns (polyolefin or olefin copolymer) up to 500 L capacity used for domestic purposes) |
| BS 4213-2004 |
家用水箱.容量500L及以下冷水貯水和混合供水與膨脹(熱塑性)水箱規范 |
|
| BS 4215-15-1990 |
電阻點焊電極.焊鉗和輔助設備.第15部分:電極臺板上用的絕緣插頭 |
(Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for insulated pins for use in electrode back-ups) |
| BS 4215-2-1987 |
電阻點焊用電極、電極夾和輔助設備.第2部分:電阻點焊用直電極規范 |
(Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for straight resistance spot welding electrodes) |
| BS 4215-6-1987 |
電阻點焊用電極、電極夾和輔助設備.第6部分:內錐度1:10的電極適配器規范 |
(Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for electrode adaptors, female taper 1:10) |
| BS 4215-7-1987 |
電阻點焊用電極、電極夾和輔助設備.第7部分:插入式電極帽規范 |
(Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for male electrode caps) |
| BS 4220-1-1974 |
農用輪式拖拉機座位的試驗方法.第1部分:人工道路試驗 |
(Methods of test for seats on agricultural wheeled tractors - Tests on artificial track) |
| BS 4222-1967 |
牙科手機傳動聯軸器(滑配接頭)尺寸規范 |
(Specification for dimensions of the transmission coupling (slip-joint) to dental handpieces) |
| BS 4223-1989 |
紗絨鋪地織物結構細節測定方法 |
(Methods for determination of constructional details of textile floor coverings with yarn pile) |
| BS 4227-1986 |
牙科用汞規范 |
(Specification for dental mercury) |
| BS 4230-1967 |
眼科軟膏用金屬包裝軟管規范 |
(Specification for metal collapsible tubes for eye ointment) |
| BS 4231-1992 |
工業液體潤滑劑粘度等級分類 |
(Classification for viscosity grades of industrial liquid lubricants) |
| BS 4235-1-1972 |
米制鍵及鍵槽規范.第1部分:平鍵和錐形鍵 |
(Specification for metric keys and keyways - Parallel and taper keys) |
| BS 4235-2-1977 |
米制鍵及鍵槽規范.第2部分:月牙鍵及鍵槽 |
(Specification for metric keys and keyways - Woodruff keys and keyways) |
| BS 4247-1-1981 |
放射性區域用的表面材料.第1部分:去污染系數的測量與計算方法 |
(Surface materials for use in radioactive areas - Methods of measuring and evaluating the decontamination factor) |
| BS 4247-2-1982 |
放射性區域用的表面材料.第2部分:材料選擇指南 |
(Surface materials for use in radioactive areas - Guide to the selection of materials) |
| BS 4248-2004 |
過硫酸鹽水泥 |
|
| BS 4249-1990 |
紙和軟木/紙基粘結材料規范 |
(Specification for paper and cork/paper jointing) |
| BS 4250-1997 |
商業用丁烷和丙烷規范 |
(Specification for commercial butane and commercial propane) |
| BS 4254-1983 |
兩組分多硫化合物基密封膠規范 |
(Specification for two-part polysulphide-based sealants) |
| BS 4255-1-1986 |
建筑物風雨防護用預制橡膠襯墊.第1部分:非微孔橡膠襯墊規范 |
(Rubber used in preformed gaskets for weather exclusion from buildings - Specification for non-cellular gaskets) |
| BS 4257-1967 |
電信和有關電子設備用鐵磁氧化物制E形磁芯尺寸規范 |
(Specification for the dimensions of E-cores made of ferromagnetic oxides for use in telecommunication and allied electronic equipment.) |
| BS 4258-10-1978 |
工業用磷酸(正磷酸)的試驗方法.第10部分:氮的氧化物含量的測定 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of oxides of nitrogen content) |
| BS 4258-11-1982 |
工業用磷酸(正磷酸)的試驗方法.第11部分:鉛含量的測定(原子吸收光譜測定法) |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of lead content (atomic absorption spectrometric method)) |
| BS 4258-12-1982 |
工業用磷酸(正磷酸)的試驗方法.第12部分:取樣技術指南 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Guide to sampling techniques) |
| BS 4258-13-1990 |
工業用磷酸(正磷酸)的試驗方法.第13部分:可溶性硫酸鹽含量的測定(電位測量法) |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of soluble sulphate content (potentiometric method)) |
| BS 4258-2-1989 |
工業用磷酸(正磷酸)的試驗方法.第2部分:鐵含量的測定 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of iron content) |
| BS 4258-3-1989 |
工業用磷酸(正磷酸)的試驗方法.第3部分:硫含量的測定 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of sulphate content) |
| BS 4258-4-1976 |
工業用磷酸(正磷酸)的試驗方法.第4部分:氟含量的測定 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of fluorine content) |
| BS 4258-5-1989 |
工業用磷酸(正磷酸)的試驗方法.第5部分:硅含量的測定 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of silica content) |
| BS 4258-6-1976 |
工業用磷酸(正磷酸)的試驗方法.第6部分:砷含量的測定 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of arsenic content) |
| BS 4258-7-1978 |
工業用磷酸(正磷酸)的試驗方法.第7部分:全氧化磷(V)含量的測定:磷鉬酸喹啉重量法 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of total phosphorus (V) oxide content: quinoline phosphomolybdate gravimetric method) |
| BS 4258-8-1978 |
工業用磷酸(正磷酸)的試驗方法.第8部分:鈣含量的測定(火焰原子吸收法) |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of calcium content (flame atomic absorption method)) |
| BS 4258-9-1989 |
工業用磷酸(正磷酸)的試驗方法.第9部分:氯化物含量的測定 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of chloride content) |
| BS 426-1969 |
機床和其他用途的死頂尖規范 |
(Specification for fixed centres for use on machine tools and in other applications) |
| BS 4261-1999 |
木材防腐.詞匯 |
(Wood preservation - Vocabulary) |
| BS 4262-1984 |
高爐用焦炭技術質量的規定方法 |
(Method of specifying the technical quality of coke for use in blast furnaces) |
| BS 4263-1967 |
艙口活動梁標志規范 |
(Specification for the marking of hatchway beams) |
| BS 4264-1987 |
商業、公務及專業用信封規范 |
(Specification for envelopes for commercial, official and professional use) |
| BS 4267-0-1987 |
硝酸銨.第0部分:一般介紹 |
(Ammonium nitrate - General introduction) |
| BS 4267-1-1988 |
硝酸銨.第1部分:氨型氮含量的測定方法 |
(Ammonium nitrate - Method for determination of ammoniacal nitrogen content) |
| BS 4267-10-1994 |
硝酸銨.二乙醚中可溶物質的測定方法 |
(Ammonium nitrate - Method for determination of matter soluble in diethyl ether) |
| BS 4267-11-1994 |
硝酸銨.水中無機物質和硬渣不可溶物的測定方法 |
(Ammonium nitrate - Method for determination of inorganic matter and grit insoluble in water) |
| BS 4267-2-1988 |
硝酸銨.第2部分:全氮含量的測定方法 |
(Ammonium nitrate - Method for determination of total nitrogen content) |
| BS 4267-3-1987 |
硝酸銨.第3部分:pH值的測定方法 |
(Ammonium nitrate - Method for measurement of pH value) |
| BS 4267-4-1987 |
硝酸銨.第4部分:硫酸鹽灰分的測定方法 |
(Ammonium nitrate - Method for determination of sulphated ash) |
| BS 4267-5-1987 |
硝酸銨.第5部分:水不溶物的測定方法 |
(Ammonium nitrate - Method for determination of matter insoluble in water) |
| BS 4267-6-1987 |
硝酸銨.第6部分:水分的測定方法 |
(Ammonium nitrate - Method for determination of water content) |
| BS 4267-7-1987 |
硝酸銨.第7部分:亞硝酸鹽含量的測定方法 |
(Ammonium nitrate - Methods for determination of nitrite content) |
| BS 4267-8-1987 |
硝酸銨.第8部分:氯化物含量的測定方法 |
(Ammonium nitrate - Methods for determination of chloride content) |
| BS 4267-9-1987 |
硝酸銨.第9部分:硫酸鹽含量測定方法 |
(Ammonium nitrate - Method for determination of sulphate content) |
| BS 4268-1967 |
木制艙蓋標志規范 |
(Specification for the marking of wooden hatchway covers) |
| BS 4269-2-1991 |
牙科用彈性印模材料.第2部分:藻酸鹽印模材料規范 |
(Dental elastic impression material - Specification for alginate impression material) |
| BS 4272-1-1968 |
麻醉機和止痛機.氧化亞氮和氧氣分別由單獨容器供給的按需供給麻醉機 |
(Anaesthetic and analgesic machines - Anaesthetic machines of the on-demand type supplied with nitrous oxide and oxygen from separate containers) |
| BS 4272-2-1996 |
麻醉機和止痛機.使用50/50%一氧化二氮和氧氣的間歇(需要)流止痛機的規范 |
(Anaesthetic and analgesic machines - Specification for intermittent (demand) flow analgesic machines for use with 50/50% (V/V) nitrous oxide and oxygen) |
| BS 4272-3-1989 |
麻醉機和止痛機.第3部分:連續流麻醉機規范 |
(Anaesthetic and analgesic machines - Specification for continuous flow anaesthetic machines) |
| BS 4274-1-2003 |
視力檢測方式.遠距視力臨床測定用檢測表規范 |
(Visual acuity test types - Test charts for clinical determination of distance visual acuity - Specification) |
| BS 4275-1997 |
有效呼吸保護裝置程序執行指南 |
(Guide to implementing an effective respiratory protective device programme) |
| BS 4276-1968 |
線材、棒材和管材壓延沖模的硬質金屬規范 |
(Specification for hard metal for wire, bar and tube drawing dies) |
| BS 4277-1968 |
膠版印刷術語詞匯 |
(Glossary of terms used in offset lithographic printing) |
| BS 4278-1984 |
提升用有眼螺拴規范 |
(Specification for eyebolts for lifting purposes) |
| BS 4280-1968 |
阿拉伯字符的音譯 |
(Transliteration of Arabic characters) |
| BS 4284-1981 |
牙印模膏(氧化鋅型)規范 |
(Specification for dental impression pastes (zinc oxide type)) |
| BS 4285-0-1990 |
乳品的微生物檢驗.第0部分:一般介紹 |
(Microbiological examination for dairy purposes - General introduction) |
| BS 4285-1.1-1991 |
乳品的微生物檢驗.第1部分:一般程序指南.第1節:取樣及樣品制備 |
(Microbiological examination for dairy purposes - Guide to general procedures - Sampling and preparation of samples) |
| BS 4285-2.1-1984 |
乳品的微生物檢驗.第2部分:微生物計數的一般應用方法.第1節:采用傾注平皿菌落計數技術的微生物計數方法 |
(Microbiological examination for dairy purposes - Methods of general application for enumeration of microorganisms - Enumeration of microorganisms by poured plate technique for colony count) |
| BS 4285-2.3-1984 |
乳品的微生物檢驗.第2部分:微生物計數的一般應用方法.第3節:采用表面平皿菌落計數技術的微生物計數方法 |
(Microbiological examination for dairy purposes - Methods of general application for enumeration of microorganisms - Enumeration of microorganisms by surface plate technique for colony count) |
| BS 4285-2.5-1989 |
乳品的微生物檢驗.第2部分:微生物計數的一般應用方法.第5節:采用直接顯微計數的細菌計數方法 |
(Microbiological examination for dairy purposes - Methods of general application for enumeration of microorganisms - Enumeration of bacteria by direct microscopic counts) |
| BS 4285-2.6-1984 |
乳品的微生物檢驗.第2部分:微生物計數的一般應用方法.第6節:采用最大概率數技術的細菌計數方法 |
(Microbiological examination for dairy purposes - Methods of general application for enumeration of microorganisms - Enumeration of microorganisms by most probable number technique) |
| BS 4285-3.10.1-1989 |
乳品的微生物檢驗.第3部分:微生物群的檢測和(或)計數方法.第10節:金黃色釀膿葡萄球菌.第1小節:采用菌落計數 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Staphylococcus aureus. - Enumeration using the colony count technique) |
| BS 4285-3.10.2-1989 |
乳品的微生物檢驗.微生物種群的檢測和(或)計數方法.金黃色釀膿葡萄球菌.檢測 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms Staphylococcus aureus - Detection) |
| BS 4285-3.10.3-1989 |
乳品的微生物檢驗.微生物種群的檢測和(或)計數方法.金黃色釀膿葡萄球菌.采用最大概率數技術的計數方法 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Staphylococcus aureus - Enumeration using the most probable number tech) |
| BS 4285-3.11-1985 |
乳品的微生物檢驗.微生物種群的檢測和(或)計數方法.類鏈球菌的檢測和計數 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Detection and enumeration of faecal streptococci) |
| BS 4285-3.12-1989 |
乳品的微生物檢驗.第3部分:微生物種群的檢測和(或)計數方法.第12節:蠟樣芽胞桿菌的計數 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Enumeration of Bacillus cereus.) |
| BS 4285-3.14-1988 |
乳品的微生物檢驗.微生物種群的檢測和(或)計數方法.嗜溫微生物的計數 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Enumeration of mesophilic microorganisms) |
| BS 4285-3.15-1993 |
乳品的微生物檢驗.微生物特定種群檢測和/或計數方法.李斯特菌屬單核微生物的檢測 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Detection of Listeria monocytogenes) |
| BS 4285-3.2-1991 |
乳品的微生物檢驗.微生物特定種群的檢測和/或計數方法.耐熱細菌的計數方法 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Enumeration of thermoduric bacteria) |
| BS 4285-3.4.2-1989 |
乳品的微生物檢驗.微生物特定種群的檢測和/或計數方法.脂解微生物的計數方法.三丁酸甘油瓊脂法 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Enumeration of lipolytic microorganisms - Tributyrin agar method) |
| BS 4285-3.5-1988 |
乳品的微生物檢驗.微生物種群的檢測和(或)計數方法.蛋白水解的微生物計數方法 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Enumeration of proteolytic microorganisms) |
| BS 4285-3.6-1986 |
乳品的微生物檢驗.微生物種群的檢測和(或)計數方法.酵母與霉菌的計數方法 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Enumeration of yeasts and moulds) |
| BS 4285-3.7-1987 |
乳品的微生物檢驗.微生物種群的檢測和(或)計數方法.大腸桿菌類計數 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Enumeration of coliform bacteria) |
| BS 4285-3.9.1-1987 |
乳品的微生物檢驗.微生物種群的檢測和/或計數方法.沙門氏菌屬的檢驗.參考方法 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Detection of Salmonella - Reference method.) |
| BS 4285-3.9.2-1992 |
乳品的微生物檢驗.第3部分:微生物種群的檢測和(或)計數方法.第9節:沙門氏菌屬的檢驗.電導率屏蔽法 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Detection of Salmonella - Screening method using electrical conductance) |
| BS 4285-4-1991 |
乳品的微生物檢驗.第4部分:衛生條件評定方法 |
(Microbiological examination for dairy purposes - Methods for assessment of hygienic conditions) |
| BS 4285-5.2-1989 |
乳品的微生物檢驗.輔助方法.奶油和冰淇淋的亞甲藍還原試驗 |
(Microbiological examination for dairy purposes - Ancillary methods - Methylene blue reduction test for cream and ice cream) |
| BS 4285-5.3-1987 |
乳品的微生物檢驗.第5部分:輔助方法.第3節:抑制物質的試驗 |
(Microbiological examination for dairy purposes - Ancillary methods - Test for inhibitory substances) |
| BS 4289-5-1989 |
油料種子的分析方法.第5部分:脂肪酸度的測定 |
(Method for the analysis of oilseeds - Determination of acidity of fat) |
| BS 4289-8-1988 |
油料種子的分析方法.濕度計的校準檢驗 |
Methods for analysis of oilseeds - Check of the calibration of moisture meters |
| BS 4290-1989 |
裝飾或保護用銀和銀合金電鍍層規范的規定方法 |
Method for specifying electroplated coatings of silver and silver alloys for decorative and protective purposes |
| BS 4292-1-1989 |
金與金合金電鍍層規范的規定方法.第1部分:工程用金與金合金 |
Method for specifying electroplated coatings of gold and gold alloys - Gold and gold alloys for engineering purposes |
| BS 4292-2-1989 |
金和金合金電鍍層規范的規定方法.第2部分:裝飾或保護用金和金合金 |
Method for specifying electroplated coatings of gold and gold alloys - Gold and gold alloys for decorative and protective purposes |
| BS 4300/10-1969 |
一般工程用鍛造鋁和鋁合金規范(補充系列).第10部分:5454型冷拔管 |
Wrought aluminium and aluminium alloys for general engineering purposes (supplementary series) - 5454 Drawn tube |
| BS 4300/13-1969 |
一般工程用鍛造鋁和鋁合金規范(補充系列)第13部分:5554型焊絲 |
(Wrought aluminium and aluminium alloys for general engineering purposes (supplementary series) - 5554 Welding wire) |
| BS 4301-1991 |
光學件和系統制圖的推薦方法 |
Recommendations for preparation of drawings for optical elements and systems |
| BS 4303-1968 |
機織織物耐撕裂性的織物翼形裂幅技術測定 |
Method for the determination of the resistance to tearing of woven fabrics by the wing-rip technique |
| BS 4305-1-1989 |
聚丙烯材料制家用浴盆.第1部分:精制浴盆規范 |
Baths for domestic purposes made of acrylic material - Specification for finished baths |
| BS 4305-2-1989 |
聚丙烯材料制家用浴盆.第2部分:連接尺寸規范 |
Baths for domestic purposes made of acrylic material - Specification for connecting dimensions |
| BS 4309-1968 |
實驗室用電阻爐性能的測量方法 |
Methods of measuring the performance of laboratory electric resistance furnaces |
| BS 4311-2-1994 |
量塊和附件規范.第2部分:附件 |
(Specification for gauge blocks and accessories - Accessories) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com