標準號 |
中文名稱 |
英文名稱 |
| BS EN ISO 8750-1998 |
彈簧型開口直銷.標準負荷盤繞式 |
Spring-type straight pins - Coiled, standard duty |
| BS EN ISO 8751-1998 |
彈簧型開口直銷.輕負荷盤繞式 |
(Spring-type straight pins - Coiled, light duty) |
| BS EN ISO 8752-1998 |
彈簧型開口直銷.重負荷槽頭式 |
Spring-type straight pins - Slotted, heavy duty |
| BS EN ISO 8754-1995 |
石油及其產品的試驗方法.石油產品.硫含量的測定.能量分散的X射線熒光法 |
Methods of test for petroleum and its products - Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence method |
| BS EN ISO 8754-2003 |
石油產品.硫含量的測定.能量分散X射線熒光光譜測定法 |
(Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry) |
| BS EN ISO 8765-2001 |
帶米制細牙螺紋的六角頭螺栓.產品等級A和B |
Hexagon head bolts with metric fine pitch thread - Product grades A and B |
| BS EN ISO 877-1996 |
塑料.暴露到直接風化、玻璃纖維對光的風化及使用屈折反光鏡對日光增強風化的方法 |
(Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors.) |
| BS EN ISO 8780-1-1991 |
顏料和稀釋劑.色散特性評定用色散方法.第1部分:前言 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Introduction |
| BS EN ISO 8780-2-1991 |
顏料和稀釋劑.色散特性評定用色散方法.第2部分:色散用振蕩搖動機 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Dispersion using an oscillatory shaking machine |
| BS EN ISO 8780-3-1991 |
顏料和稀釋劑.色散特性評定用色散方法.第3部分:色散用高速葉輪機 |
(Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Dispersion using a high speed impeller mill) |
| BS EN ISO 8780-4-1991 |
顏料和稀釋劑.色散特性評定用色散方法.第4部分:色散用研磨機 |
(Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Dispersion using a bead mill) |
| BS EN ISO 8780-5-1991 |
顏料和稀釋劑.色散特性評定用色散方法.第5部分:色散用自動研磨機 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Dispersion using an automatic muller |
| BS EN ISO 8780-6-1991 |
顏料和稀釋劑.色散特性評定用色散方法.第6部分:色散用三組鎮壓機 |
(Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Dispersion using a triple-roll mill) |
| BS EN ISO 8781-1-1991 |
顏料和稀釋劑.色散特性評定方法.第1部分:有色顏料著色度變化的評定 |
(Pigments and extenders - Methods of assessment of dispersion characteristics - Assessment from the charge in tinting strength of coloured pigments) |
| BS EN ISO 8781-2-1991 |
顏料和稀釋劑.色散特性評定方法.第2部分:磨碎細度變化的評定 |
(Pigments and extenders - Methods of assessment of dispersion characteristics - Assessment from the change in fineness of grind) |
| BS EN ISO 8781-3-1991 |
顏料和稀釋劑.色散特性評定方法.第3部分:光澤變化評定 |
(Pigments and extenders - Methods of assessment of dispersion characteristics - Assessment from the change in gloss) |
| BS EN ISO 8785-1999 |
幾何產品規范(GPS).表面缺陷.術語、定義和參數 |
(Geometrical product specification (GPS) - Surface imperfections - Terms, definitions and parameters) |
| BS EN ISO 8795-2002 |
飲用水供給用塑料輸水管道系統.析出物遷移量評定.測定塑料管道、管件和連接件的析出物遷移量 |
(Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints) |
| BS EN ISO 8799-1996 |
表面活性劑.硫酸乙氧乙醇和硫酸乙氧烷基苯酚.非硫化物含量的測量 |
(Analysis of surface active agents (raw materials) - Ethoxylated alcohol and alkylphenol sulfates - Method for determination of unsulfated matter content) |
| BS EN ISO 8819-1995 |
石油及其產品的試驗方法.液化石油氣.硫化氫的測定.醋酸鹽導入法 |
(Methods of test for petroleum and its products - Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method) |
| BS EN ISO 8826-1-1995 |
技術制圖.滾柱軸承.通用簡化畫法 |
(Technical drawings - Roller bearings - General simplified representation) |
| BS EN ISO 8826-2-1997 |
技術制圖.滾動軸承.簡化畫法概括 |
(Technical drawings - Roller bearings - Detailed simplified representation) |
| BS EN ISO 8835-4-2005 |
吸入式麻醉劑系統.麻醉劑蒸氣輸送設備 |
|
| BS EN ISO 8835-5-2004 |
吸入式麻醉劑系統.麻醉劑通風設備 |
|
| BS EN ISO 8847-2004 |
小艇.操舵裝置.纜索和滑輪系統 |
|
| BS EN ISO 8849-2003 |
小艇.電動直流艙底泵 |
(Small craft - Electrically operated direct-current bilge-pumps) |
| BS EN ISO 8861-1998 |
造船.柴油機船的發動機室的通風.設計要求和計算依據 |
(Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations) |
| BS EN ISO 887-2000 |
通用米制螺栓、螺釘和螺母用平墊圈.一般示意圖 |
(Plain washers for metric bolts, screws and nuts for general purposes - General plan) |
| BS EN ISO 8871-1-2004 |
非腸道及制藥設備用彈性件.水蒸壓器中的萃取物 |
|
| BS EN ISO 8871-1-2004 |
非腸道及制藥設備用彈性件.水蒸壓器中的萃取物 |
|
| BS EN ISO 8871-1997 |
含水非腸道藥配制劑用彈性件 |
(Elastomeric parts for aqueous parenteral preparations) |
| BS EN ISO 8871-2-2004 |
非腸道及制藥設備用彈性件.識別和特性 |
|
| BS EN ISO 8871-2-2004 |
非腸道及制藥設備用彈性件.識別和特性 |
|
| BS EN ISO 8871-3-2004 |
非腸道及制藥設備用彈性件.釋放粒子計數的測定 |
|
| BS EN ISO 8871-3-2004 |
非腸道及制藥設備用彈性件.釋放粒子計數的測定 |
|
| BS EN ISO 8872-2003 |
輸血、輸液及注射瓶的鋁蓋.一般要求和試驗方法 |
(Aluminium caps for transfusion, infusion and injection bottles - General requirements and test methods) |
| BS EN ISO 8891-2000 |
貴金屬含量至少為25%但低于75%的牙科用鑄造合金 |
(Dental casting alloys with noble metal content of at least 25% but less than 75%) |
| BS EN ISO 8892-1995 |
油料種子殘渣.己烷總殘留量的測定 |
(Oilseed residues - Determination of total residual hexane) |
| BS EN ISO 8968-1-2002 |
牛奶.氮含量的測定.Kjeldahl法 |
(Milk - Determination of nitrogen content - Kjeldahl method) |
| BS EN ISO 8968-2-2002 |
牛奶.氮含量的測定.分段浸解法(宏觀法) |
(Milk - Determination of nitrogen content - Block-digestion method (Macro method)) |
| BS EN ISO 8968-4-2002 |
牛奶.氮含量的測定.非蛋白質氮含量的測定 |
(Milk - Determination of nitrogen content - Determination of non-protein nitrogen content) |
| BS EN ISO 8968-5-2002 |
牛奶.氮含量的測定.蛋白質氮含量的測定 |
(Milk - Determination of nitrogen content - Determination of protein-nitrogen content) |
| BS EN ISO 8973-1999 |
液化石油氣.密度和蒸氣壓力的計算方法 |
(Liquefied petroleum gases - Calculation method for density and vapour pressure) |
| BS EN ISO 8974-2002 |
塑料.酚醛樹脂.用氣相色譜法測定殘余酚含量 |
(Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography) |
| BS EN ISO 8975-1995 |
塑料.酚醛樹脂.pH值的測定 |
(Plastics - Phenolic resins - Determination of pH) |
| BS EN ISO 898-1-1999 |
碳鋼和合金鋼制造的緊固件的機械特性.螺栓、螺釘和螺柱 |
(Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs) |
| BS EN ISO 898-5-1999 |
碳鋼及合金鋼制緊固件的機械性能.無拉伸應力下的定位螺釘和類似的螺紋緊固件 |
(Mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners not under tensile stresses) |
| BS EN ISO 898-6-1996 |
緊固件的機械特性.螺母樣品的檢驗荷載要求.精密螺距 |
(Mechanical properties of fasteners - Nuts with specified proof load values - Fine pitch thread) |
| BS EN ISO 8980-1-1996 |
眼科光學.未打磨完成的眼鏡片.單光多焦透鏡片規范 |
(Ophthalmic optics - Uncut finished spectacle lenses - Specifications for single-vision and multifocal lenses) |
| BS EN ISO 8980-1-2004 |
眼科光學.未切邊成品眼鏡片.單焦點和多焦點鏡片規范 |
|
| BS EN ISO 8980-2-1996 |
眼科光學.未打磨完成的眼鏡片.漸變眼鏡片規范 |
(Ophthalmic optics - Uncut finished spectacle lenses - Specifications for progressive power lenses) |
| BS EN ISO 8980-2-2004 |
眼科光學.未切邊成品眼鏡片.漸變焦眼鏡片規范 |
|
| BS EN ISO 8980-3-1999 |
眼科光學.未打磨完成的眼鏡片.透射率規范和試驗方法 |
(Ophthalmic optics - Uncut finished spectacle lenses - Transmittance specifications and test methods) |
| BS EN ISO 8980-3-2004 |
眼科光學.未切邊成品眼鏡片.透光性規范和試驗方法 |
|
| BS EN ISO 8980-4-2000 |
眼科光學.未打磨的成品眼鏡鏡片.防反射涂層的試驗方法和規范 |
(Ophthalmic optics - Uncut finished spectacle lenses - Specifications and test methods for anti-reflective coatings) |
| BS EN ISO 8985-1998 |
塑料.乙烯/乙烯基乙酸鹽共聚物(ENAC)熱塑性.乙烯基乙酸鹽含量的測定 |
(Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content) |
| BS EN ISO 8986-2-1996 |
塑料.聚丁烯模制品和擠塑材料.第2部分:試樣制造和性能測定 |
(Plastics - Polybutene (PB) moulding and extrusion materials - Preparation of test specimens and determination of properties) |
| BS EN ISO 8987-1998 |
塑料.酚醛樹脂.在B轉變試驗板上的活化性能測定 |
(Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate) |
| BS EN ISO 8988-1997 |
塑料.酚醛樹脂.六亞甲基四胺含量的測定.基爾達斯法和過氯酸法 |
(Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method and perchloric acid method) |
| BS EN ISO 8989-1998 |
塑料.液體酚醛樹脂.水混溶性的測定 |
(Plastics - Liquid phenolic resins - Determination of water miscibility) |
| BS EN ISO 899-1-2003 |
塑料.蠕變的測定.拉伸蠕變 |
(Plastics - Determination of creep behaviour - Tensile creep) |
| BS EN ISO 899-2-2003 |
塑料.蠕變的測定.用三點加載法測定撓曲蠕變 |
(Plastics - Determination of creep behaviour - Flexural creep by three-point loading) |
| BS EN ISO 8990-1996 |
熱絕緣.穩定狀態熱傳輸特性的測定.校正及屏蔽的隔熱箱 |
(Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box) |
| BS EN ISO 8996-2005 |
熱環境的人類工效學.代謝率的測定 |
|
| BS EN ISO 90-1-1999 |
輕型金屬容器.定義和尺寸、容量的測定.開頂式二重卷邊罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Open-top cans |
| BS EN ISO 90-2-1999 |
輕型金屬容器.定義和尺寸、容量的測定.通用容器 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - General use containers |
| BS EN ISO 90-3-2001 |
輕型金屬容器.定義和尺寸、容量的測定.開頂式二重卷邊罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Light gauge metal containers - Definitions and determination of dimensions and capacities - Aerosol cans |
| BS EN ISO 9000-1-1994 |
質量管理和質量保證.選則和使用導則 |
(Quality management and quality assurance standards - Guidelines for selection and use) |
| BS EN ISO 9000-2000 |
質量管理系統.原理和詞匯 |
(Quality management systems - Fundamentals and vocabulary) |
| BS EN ISO 9000-2005 |
質量管理體系.基礎和詞匯 |
|
| BS EN ISO 9000-3-1998 |
質量管理和質量保證.ISO 9001-1994:計算機軟件的開發,供給,安裝和維護的使用導則 |
Quality management and quality assurance standards - Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software |
| BS EN ISO 9001-2000 |
質量管理系統.要求 |
(Quality management systems - Requirements) |
| BS EN ISO 9004-2000 |
質量管理系統.性能改進導則 |
Quality management systems - Guidelines for performance improvements |
| BS EN ISO 9013-2002 |
熱切割.熱切割分類.產品幾何量技術規范和質量公差 |
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances |
| BS EN ISO 9020-1996 |
色漆和清漆用粘合劑.氨基樹脂中自由甲醛含量的測定.亞硫酸鈉滴定法 |
Binders for paints and varnishes - Determination of free-formaldehyde content of amino resins - Sodium sulfite titrimetric method |
| BS EN ISO 9029-1997 |
石油和石油產品的試驗方法.原油.水含量的測定.蒸餾法 |
Methods of test for petroleum and its products - Crude petroleum - Determination of water - Distillation method |
| BS EN ISO 9046-2005 |
建筑施工.連接產品.恒溫下密封劑的粘附/粘結性能的測定 |
|
| BS EN ISO 9047-1995 |
建筑施工.密封.在可變溫度下粘附/內聚特性的測定 |
Building construction - Sealants - Determination of adhesion/cohesion properties at variable temperatures |
| BS EN ISO 9047-2003 |
房屋建筑.連接件.變溫下密封膠粘合性能的測定 |
(Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures) |
| BS EN ISO 9054-1999 |
硬質泡沫塑料.自結皮高密度材料的試驗方法 |
Cellular plastics, rigid - Test methods for self-skinned high-density materials |
| BS EN ISO 9073-10-2005 |
紡織品.無紡織物的試驗方法.干燥狀態下棉絨和其它粒子生成物 |
|
| BS EN ISO 9073-10-2005 |
紡織品.無紡織物的試驗方法.干燥狀態下棉絨和其它粒子生成物 |
|
| BS EN ISO 9073-2-1997 |
紡織品.非織造品的試驗方法.厚度的測定 |
Textiles - Test methods for nonwovens - Determination of thickness |
| BS EN ISO 9073-4-1997 |
紡織品.非織造品的檢驗方法.第4部分:抗撕裂的測定 |
Textiles - Test methods for nonwovens - Determination of tear resistance |
| BS EN ISO 9073-7-1998 |
紡織品.非織造品的試驗方法.彎曲長度的測定 |
Textiles - Test methods for nonwovens - Determination of bending length |
| BS EN ISO 9073-8-1998 |
紡織品.非織造品的試驗方法.液體滲透時間的測定(模擬尿) |
Textiles - Test methods for nonwovens - Determination of liquid strike-through time (simulated urine) |
| BS EN ISO 9073-9-1998 |
紡織品.非織造品的試驗方法.懸垂系數測定 |
Textiles - Test methods for nonwovens - Determination of drape coefficient |
| BS EN ISO 9080-2003 |
塑料管道和導管系統.用外推法測定熱塑性管道型材的長期靜液壓強度 |
(Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation) |
| BS EN ISO 9093-1-1995 |
小船.金屬海水閥和通體配件 |
(Small craft - Seacocks and through-hull fittings - Metallic) |
| BS EN ISO 9093-2-2002 |
小艇.通海旋塞及貫穿艇體配件.非金屬的 |
(Small craft - Seacocks and through-hull fittings - Non-metallic) |
| BS EN ISO 9094-1-2003 |
小艇.防火.艇體長最高達15m的小艇 |
Small craft - Fire protection - Craft with a hull length of up to and including 15 m |
| BS EN ISO 9094-2-2003 |
小艇.防火.艇體長超過15m的小艇 |
(Small craft - Fire protection - Craft with a hull length of over 15 m) |
| BS EN ISO 9097-1995 |
小型船舶.電扇 |
(Small craft - Electric fans) |
| BS EN ISO 9100-1-2005 |
玻璃容器.真空凸緣瓶口.總則 |
|
| BS EN ISO 9100-10-2005 |
玻璃容器.真空凸緣瓶口.普通規格77 |
|
| BS EN ISO 9100-11-2005 |
玻璃容器.真空凸緣瓶口.普通規格82 |
|
| BS EN ISO 9100-12-2005 |
玻璃容器.真空凸緣瓶口.普通規格89 |
|
| BS EN ISO 9100-5-2005 |
玻璃容器.真空凸緣瓶口.普通規格43和48 |
|
| BS EN ISO 9100-6-2005 |
玻璃容器.真空凸緣瓶口.普通規格53和58 |
|
| BS EN ISO 9100-7-2005 |
玻璃容器.真空凸緣瓶口.深度58 |
|
| BS EN ISO 9100-8-2005 |
玻璃容器.真空凸緣瓶口.普通規格63、66和70 |
|
| BS EN ISO 9100-8-2005 |
玻璃容器.真空凸緣瓶口.普通規格63、66和70 |
|
| BS EN ISO 9100-9-2005 |
玻璃容器.真空凸緣瓶口.深度63、66和70 |
|
| BS EN ISO 9142-2004 |
粘合劑.膠粘件試驗用標準實驗室老化條件的選擇指南 |
|
| BS EN ISO 9167-1-1993 |
油菜種子.葡萄糖甙含量測定.高性能液相色譜法 |
(Rapeseed - Determination of glucosinolates content - Method using high-performance liquid chromatography) |
| BS EN ISO 9167-2-1995 |
油菜種子.葡萄糖甙含量測定.X射線熒光光譜法 |
(Rapeseed - Determination of glucosinolates content - Method using X-ray fluorescence spectrometry) |
| BS EN ISO 9173-1-1992 |
拔牙鉗.第1部分:螺釘和鉸鏈接合型 |
(Dental extraction forceps - Screw and pin joint types) |
| BS EN ISO 9187-1-1999 |
醫用注射設備.注射物用安瓿瓶 |
Injection equipment for medical use - Ampoules for injectables |
| BS EN ISO 9187-1-2003 |
醫用注射器具.注射安瓿 |
(Injection equipment for medical use - Ampoules for injectables) |
| BS EN ISO 9187-2-1999 |
醫用注射設備.一點切針劑 |
(Injection equipment for medical use - One-point-cut (OPC) ampoules) |
| BS EN ISO 9220-1989 |
金屬鍍層.鍍層厚度的測量.掃描電子顯微鏡法 |
(Metallic coatings - Measurement of coating thickness - Scanning electron microscope method) |
| BS EN ISO 9222-1-1995 |
技術制圖.動密封應用.第1部分:簡化畫法 |
(Technical drawings - Seals for dynamic application - General simplified representation) |
| BS EN ISO 9222-2-1995 |
技術制圖.動力應用的密封裝置.簡化畫法詳解 |
(Technical drawings - Seals for dynamic application - Detailed simplified representation) |
| BS EN ISO 9237-1995 |
紡織品.纖維織物透氣性的測定 |
(Textiles - Determination of the permeability of fabrics to air) |
| BS EN ISO 9239-1-2002 |
著火試驗反應.地板覆蓋物上火焰的水平表面擴展.使用輻射熱源測定燃燒性能 |
(Reaction to fire tests - Horizontal surface spread of flame on floor-covering systems - Determination of the burning behaviour using a radiant heat source) |
| BS EN ISO 9241-1-1997 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第1部分:概述 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - General introduction) |
| BS EN ISO 9241-10-1996 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第10部分:對話原理 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Dialogue principles) |
| BS EN ISO 9241-11-1998 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.使用指南 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Guidance on usability) |
| BS EN ISO 9241-12-1999 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.信息表示法 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Presentation of information) |
| BS EN ISO 9241-13-1999 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.用戶導則 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - User guidance) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com