標準號 |
中文名稱 |
英文名稱 |
| BS DD ENV 843-2-1996 |
高級工業陶瓷.單片陶瓷.室溫機械性能.測定彈性模量 |
(Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Determination of elastic moduli) |
| BS DD ENV 843-3-1997 |
高級工業陶瓷.塊體陶瓷.室溫機械性能.從固定應力率的彎曲強度試驗測定裂紋增長參數的副標準 |
(Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Determination of subcritical crack growth parameters from constant stressing rate flexural strength test) |
| BS DD ENV 843-4-1995 |
高級工業陶瓷.塊體陶瓷.室溫機械性能.維氏硬度計、努氏硬度計和洛氏硬度計和表面硬度試驗 |
(Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperatures - Vickers, Knoop and Rockwell superficial hardness tests) |
| BS DD ENV 843-5-1997 |
高級工業陶瓷.塊體陶瓷.室溫機械性能.統計分析 |
(Advanced technical ceramics - Monolithic ceramics - Mechanical tests at room temperature - Statistical analysis) |
| BS DD ENV 926-2-1999 |
滑翔降落傘設備.傘兵.要求和飛行試驗 |
(Paragliding equipment - Paragliders - Requirements and flight tests) |
| BS DD ENV 927-2-2000 |
涂料和清漆.外觀木材的涂敷材料和涂敷系統.性能規范 |
(Paints and varnishes - Coating materials and coating systems for exterior wood - Performance specification) |
| BS DD ENV 955-4-1997 |
耐熱產品的化學分析.硅酸鋁產品(火焰原子吸收分光光度測定法(FAAS) 和感應耦合等離子原子發射光譜(ICP)) |
(Chemical analysis of refractory products - Products containing silica and/or alumina (Analysis by flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrograp) |
| BS DD ENV 993-11-1997 |
密集成形耐熔制品的試驗方法.測定熱沖擊阻力 |
(Methods of test for dense shaped refractory products - Determination of resistance to thermal shock) |
| BS DD ENV ISO 10722-1-1998 |
土工織物及其相關產品.在安裝過程中模擬危險性程序.在晶粒材料中安裝 |
(Geotextiles and geotextile-related products - Procedure for simulating damage during installation - Installation in granular materials) |
| BS DD ENV ISO 11079-1999 |
寒冷環境評估.需求的防寒服裝測定 |
(Evaluation of cold environments - Determination of required clothing insulation (IREQ)) |
| BS DD ENV ISO 11133-1-2000 |
食品和飼料中的微生物.栽培過程質量保證和性能測試指南.實驗室栽培過程質量保證的一般指南 |
(Microbiology of food and animal feeding stuffs - Guidelines on quality assurance and performance testing of culture media - General guidelines on quality assurance of culture media in the laboratory) |
| BS DD ENV ISO 13438-2000 |
土工織物及其相關產品.測定抗氧化性的篩選方法 |
(Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation) |
| BS DD ENV ISO 13530-1999 |
水質量.水分析用分析質量控制指南 |
(Water quality - Guide to analytical quality control for water analysis) |
| BS DD ENV ISO 14253-2-2002 |
產品幾何量技術規范(GPS).測量工件和測量設備的監測.在測量設備和產品驗證校準中估算GPS測量中不確定度的指 |
(Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equi) |
| BS DD ENV ISO 14815-2000 |
道路運輸和交通遠程信息管理.自動運載工具和設備驗證.系統規范 |
(Road transport and traffic telematics - Automatic vehicle and equipment identification - System specification) |
| BS DD ENV ISO 14816-2000 |
道路運輸和交通遠程信息管理.自動運載工具和設備驗證.數字和數據結構 |
(Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structures) |
| BS DD ENV ISO 14819-3-2001 |
交通和運行信息(TTI).通過交通文電編碼TTI信息.ALERT的局部參考信息 |
(Traffic and travel information (TTI) - TTI messages via traffic message coding - Location referencing for ALERT-C) |
| BS DD ENV ISO 14825-1997 |
地理學數據文檔 |
(Geographic data files) |
| BS DD ENV ISO 14904-1997 |
道路運輸和交通遠程信息管理. |
(Road transport and traffic telematics - Automatic fee collection (AFC) - Interface specification for clearing between operators) |
| BS DD ENV ISO 14906-1999 |
道路運輸和交通遠程信息管理. |
(Road transport and traffic telematics (RTTT) - Electronic fee collection (EFC) - Application interface definition for dedicated short range communications) |
| BS DD ENV ISO 14907-1-2001 |
道路運輸和交通遠程信息管理.電子費用收集(EFC).用戶和固定設備試驗程序.試驗程序描述 |
(Road transport and traffic telematics (RTTT) - Electronic fee collection (EFC) - Test procedures for user and fixed equipment - Description of test procedures) |
| BS DD ENV ISO 8502-1-1992 |
涂料和相關產品. 表面清潔度的評估試驗.可溶解鐵的腐蝕產品 |
(Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Field test for soluble iron corrosion products) |
| BS DD ENV ISO/TR 13843-2001 |
水質.微生物法的作用指南 |
(Water quality - Guidance on validation of microbiological methods) |
| BS DD IEC PAS 61754-20-2001 |
纖維光學連接器接口.LC型連接器門類 |
(Fibre optic connector interfaces - Type LC connector family) |
| BS DD IEC PAS 62001-2004 |
HVDC系統用交流過濾器的規范和設計評價指南 |
|
| BS DD IEC PAS 62255-1-2001 |
高比特率數字接入電信網絡用多對電纜.戶外電纜 |
(Multi-pair cables used in high bit rate digital access telecommunication networks - Outdoor Cables) |
| BS DD IEC TS 60034-17-2002 |
旋轉電機.變頻供電的籠型感應電動機.應用導則 |
(Rotating electrical machines - Cage induction motors when fed from converters - Application guide) |
| BS DD IEC TS 60034-20-1-2002 |
旋轉電機.控制電動機.步進電動機 |
(Rotating electrical machines - Control motors - Stepping motors) |
| BS DD IEC TS 60034-26-2002 |
旋轉電機.非平衡電壓對三相感應電動機性能的影響 |
(Rotating electrical machines - Effects of unbalanced voltages on the performance of three-phase induction motors) |
| BS DD IEC TS 60695-11-3-2004 |
著火危險試驗.試驗火焰.500W火焰.設備和驗證試驗方法 |
|
| BS DD IEC TS 60695-11-4-2004 |
著火危險試驗.試驗火焰.50W火焰.設備和驗證試驗方法 |
|
| BS DD IEC TS 60695-11-40-2003 |
著火危險試驗.著火試驗.認可試驗.指南 |
(Fire hazard testing - Test flames - Confirmatory tests - Guidance) |
| BS DD IEC TS 60695-2-20-2004 |
著火危險試驗.基于灼熱/發熱絲的試驗方法.熱絲圈可點火性.設備、試驗方法和指南 |
|
| BS DD IEC TS 60695-2-20-2004 |
著火危險試驗.基于灼熱/發熱絲的試驗方法.熱絲圈可點火性.設備、試驗方法和指南 |
|
| BS DD IEC TS 60695-7-3-2004 |
著火危險試驗.火災廢物的毒性.試驗結果的使用和解釋 |
|
| BS DD IEC TS 60695-7-3-2004 |
著火危險試驗.火災廢物的毒性 |
|
| BS DD IEC TS 60695-7-51-2002 |
著火危險試驗.著火流出物的毒性.毒性的估算.試驗結果的計算和解釋 |
(Fire hazard testing - Toxicity of fire effluent - Estimation of toxic potency - Calculation and interpretation of test results) |
| BS DD IEC TS 60870-6-602-2002 |
遠動設備和系統.與ISO標準和ITU-T建議兼容的遠動協議.TASE傳輸輪廓 |
(Telecontrol equipment and systems - Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE transport profiles) |
| BS DD IEC TS 61000-1-2-2002 |
電磁兼容性(EMC).總則.獲得電氣和電子設備電磁現象達到功能安全的方法論 |
(Electromagnetic compatibility (EMC) - General - Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomena) |
| BS DD IEC TS 61334-5-3-2002 |
采用配電線載波系統的配電自動化.低層文件集.擴展型光譜適配性寬帶(SS-AW)文件集 |
(Distribution automation using distribution line carrier systems - Lower layer profiles - Spread spectrum adaptive wideband (SS-AW) profile) |
| BS DD IEC TS 61334-5-4-2002 |
使用配線載波系統的分配自動化.低層輪廓.多載波調制(MCM)輪廓 |
(Distribution automation using distribution line carrier systems - Lower layer profiles - Multi-carrier modulation (MCM) profile) |
| BS DD IEC TS 61334-5-5-2002 |
使用配線載波系統的分配自動化.低層輪廓.擴展譜帶快速跳頻(SS-FFH)輪廓 |
(Distribution automation using distribution line carrier systems - Lower layer profiles - Spread spectrum-fast frequency hopping (SS-FFH) profile) |
| BS DD IEC TS 61370-2002 |
蒸汽渦輪機.蒸汽純度 |
(Steam turbines - Steam purity) |
| BS DD IEC TS 61400-13-2002 |
機械載荷測量 |
(Measurement of mechanical loads) |
| BS DD IEC TS 61400-23-2002 |
轉式葉片全尺寸結構試驗 |
(Full-scale structural testing of rotor blades) |
| BS DD IEC TS 61804-1-2004 |
過程控制的功能塊.系統方面的概要 |
|
| BS DD IEC TS 61850-2-2003 |
變電所的通信網絡和系統.術語匯編 |
(Communication networks and systems in substations - Glossary) |
| BS DD IEC TS 61968-2-2004 |
電設施應用集成.分布管理用系統接口.術語匯編 |
|
| BS DD IEC TS 61994-1-2003 |
頻率控制和選擇用壓電和介電器件.術語匯編.壓電和介電諧振器 |
(Piezoelectric and dielectric devices for frequency control and selection - Glossary - Piezoelectric and dielectric resonators) |
| BS DD IEC TS 61994-4-2-2004 |
頻率控制和選擇用壓電和介電器件.術語匯編.壓電和介電材料.壓電陶瓷 |
|
| BS DD IEC TS 61994-4-2-2004 |
頻率控制和選擇用壓電和介電器件.術語匯編.壓電和介電材料.壓電陶瓷 |
|
| BS DD IEC TS 62091-2003 |
低壓開關設備和控制設備.固定式消防泵驅動器用控制器 |
(Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps) |
| BS DD IEC TS 62143-2003 |
飛機場的照明和照明標志的電氣裝置.航空地面照明系統.安全生命周期法的開發指南 |
(Electrical installations for lighting and beaconing of aerodromes - Aeronautical ground lighting systems - Guidelines for the development of a safety lifecycle methodology) |
| BS DD IEC TS 62239-2003 |
航空電子設備的過程管理.電子件管理計劃的制定 |
(Process management for avionics - Preparation of an electronic components management plan) |
| BS DD IEC TS 62282-1-2005 |
燃料電池工藝學.術語 |
|
| BS DD IEC TS 62370-2004 |
電聲學.聲強測量儀器.電磁和靜電兼容性要求和試驗規程 |
|
| BS DD IEC/PAS 60044-5-2002 |
儀表用變壓器.電容器變壓器 |
(Instrument transformers - Capacitor voltage transformers) |
| BS DD IEC/PAS 61162-100-2002 |
海上導航和無線電通信設備及系統的數字接口.單人講話和多人收聽.UAIS對IEC 61162-1的額外要求 |
(Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Single talker and multiple listeners - Extra requirements to IEC 61162-1 for the UAIS) |
| BS DD IEC/PAS 61162-102-2004 |
海上導航和無線電通信設備及系統.數字接口.單通話器和多受話器.航海數據記錄器對IEC 61162-1的額外要求 |
|
| BS DD IEC/PAS 61280-2-10-2003 |
纖維光學通信子系統試驗程序.數字系統.激光發射機的時間分辨線性調頻脈沖和α因數測量 |
(Fibre optic communication subsystem test procedures - Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters) |
| BS DD IEC/PAS 61300-3-29-2002 |
光纖互連器械和備用件.基本試驗和測量程序.檢驗和測量.DWDM零件光譜傳輸功能射程特性的測量技術 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Measurement techniques for characterizing the amplitude of the spec) |
| BS DD IEC/PAS 61300-3-35-2002 |
光纖互連器件和無源件.基本試驗和測量程序.檢驗和測量.光纖柱形連接器的目視檢測 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Fibre optic cylindrical connector endface visual inspection) |
| BS DD IEC/PAS 61499-4-2002 |
工業過程測量和控制系統用功能器件.符合標桿規則 |
(Function blocks for industrial-process measurement and control systems - Rules for compliance profiles) |
| BS DD IEC/PAS 62260-2001 |
用反離散傅里葉變換法(IDFT)測定頻域中脈沖/階躍回程損耗 |
(Pulse/step return loss from measurement in the frequency domain using the inverse discrete fourier transformation (IDFT)) |
| BS DD IEC/PAS 62338-2003 |
屏蔽對稱電纜.用三線法測量連接衰減 |
(Screened balanced cables - Coupling attenuation measurement, triaxial method) |
| BS DD ISO 709-2001 |
香精油.測定酯化值 |
(Essential oils - Determination of ester value) |
| BS DD ISO/PAS 11856-2003 |
鋪地織物.纖維捆綁物測定的試驗方法 |
(Textile floor coverings - Test methods for the determination of fibre bind) |
| BS DD ISO/TR 15235-2001 |
涂料和有關產品使用前的鋼襯底制備.水溶鹽污染物等級效應的采集信息 |
(Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination) |
| BS DD ISO/TR 15969-2001 |
表面化學分析.深度剖面.濺涂深度的測量 |
(Surface chemical analysis - Depth profiling - Measurement of sputtered depth) |
| BS DD ISO/TR 16144-2002 |
液壓傳動.液體粒子自動計算器的校驗.SRM 2806 標準物質認證的使用程序 |
(Hydraulic fluid power - Calibration of liquid automatic particle counters - Procedures used to certify the standard reference material SRM 2806) |
| BS DD ISO/TS 11155-2-2002 |
道路車輛.乘客艙內空氣過濾器.氣體過濾試驗 |
(Road vehicles - Air filters for passenger compartments - Test for gaseous filtration) |
| BS DD ISO/TS 11725-2002 |
固體礦物燃料.測定氮.微量氣化法 |
(Solid mineral fuels - Determination of nitrogen - Semi-micro gasification method) |
| BS DD ISO/TS 12902-2002 |
固體礦物燃料.碳、氫和氮的總含量的測定.儀器分析法 |
(Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods) |
| BS DD ISO/TS 13474-2003 |
聲學.環境噪聲評估用脈沖聲音傳播 |
(Acoustics - Impulse sound propagation for environmental noise assessment) |
| BS DD ISO/TS 13762-2002 |
粒徑分析.小角度X射線散射法 |
(Particle size analysis - Small angle X-ray scattering method) |
| BS DD ISO/TS 15666-2003 |
聲學.用社會和社會聲學測量法評定噪聲干擾 |
(Acoustics - Assessment of noise annoyance by means of social and socio-acoustic surveys) |
| BS DD ISO/TS 16628-2003 |
氣管支氣管導管.尺寸指定和標示的推薦方法 |
(Tracheobronchial tubes - Recommendations for size designation and labelling) |
| BS DD ISO/TS 16668-2001 |
基本語義寄存器(BSR) |
(Basic semantics register (BSR)) |
| BS DD ISO/TS 17090-1-2002 |
保健信息學.公開密鑰的基礎設施.構架和縱覽 |
(Health informatics - Public key infrastructure - Framework and overview) |
| BS DD ISO/TS 17090-2-2002 |
保健信息學.公開密鑰的基礎設施.合格證書文件 |
(Health informatics - Public key infrastructure - Certificate profile) |
| BS DD ISO/TS 17090-3-2002 |
保健信息學.公開密鑰的基礎設施.認證管理機構的政策管理 |
(Health informatics - Public key infrastructure - Policy management of certification authority) |
| BS DD ISO/TS 17117-2002 |
保健信息學.可控保健術語.結構和高水平指示儀 |
(Health informatics - Controlled health terminology - Structure and high-level indicators) |
| BS DD ISO/TS 17450-2-2004 |
產品幾何量技術規范.一般概念.基本原則、規范、操作者和不確定度 |
|
| BS DD ISO/TS 17450-2-2004 |
產品幾何量技術規范.一般概念.基本原則、規范、操作者和不確定度 |
|
| BS DD ISO/TS 17764-1-2002 |
動物飼料.脂肪酸含量的測定.甲酯的制備 |
(Animal feeding stuffs - Determination of the content of fatty acids - Preparation of methyl esters) |
| BS DD ISO/TS 18308-2004 |
醫療信息學.電子醫療記錄結構要求 |
|
| BS DD ISO/TS 18835-2004 |
吸入麻醉系統.蒸餾汽化器及相關設備 |
|
| BS DD ISO/TS 21667-2004 |
醫療健康信息學.健康指示器概念框架 |
|
| BS DD ISO/TS 21748-2004 |
測量不確定度評估的重復性、再現性和準確度評估的使用指南 |
|
| BS DD ISO/TS 22559-1-2004 |
升降機(電梯)的安全要求.升降機(電梯)全球安全要求(GESRs) |
|
| BS DD ISO/TS 22559-1-2004 |
升降機(電梯)的安全要求.升降機(電梯)全球安全要求(GESRs) |
|
| BS DD ISO/TS 23081-1-2004 |
信息和文獻工作.記錄管理過程.記錄用數據.原則 |
|
| BS DD ISO/TS 3632-1-2003 |
藏紅花.規范 |
(Saffron (Crocus sativus L.) - Specification) |
| BS DD ISO/TS 3632-2-2003 |
藏紅花.試驗方法 |
(Saffron (Crocus sativus L.) - Test methods) |
| BS E9007-1975 |
電子器件質量評定協調體系規范.基本規范.計數檢驗的取樣計劃及過程 |
(Specification for harmonized system of quality assessment for electronic components: Basic specification: Sampling plans and procedures for inspection by attributes) |
| BS E9063-1976 |
電子器件質量評定協調體系規范.空白詳細規范.工業用加熱三極管 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: industrial heating triodes) |
| BS E9065-1976 |
電子器件質量評定協調體系規范.空白詳細規范.陽極消耗小于1kW的小功率發射管 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: small power transmitting tubes of anode dissipation up to 1 kW) |
| BS E9372-1976 |
電子器件質量評定協調體系規范.空白詳細規范.低頻與高頻放大用限制環境的雙極晶體管 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: ambient-rated bipolar transistors for low and high frequency amplification) |
| BS E9375-1975 |
電子器件質量評定協調體系規范.空白詳細規范.除精密電壓溫度補償標準二極管之外的調壓二極管 |
(Specification - Harmonized system of quality assessment for electronic components - Blank detail specification: voltage regulator diodes and voltage reference diodes excluding precision-voltage temper) |
| BS EN 1-1998 |
帶有蒸氣燃燒器的燃油爐 |
(Flued oil stoves with vaporizing burners) |
| BS EN 10001-1991 |
生鐵的定義和分類 |
(Definition and classification of pig-irons) |
| BS EN 100012-1996 |
電子器件的質量評估系統一致性.基礎規范.X射線檢驗電子件 |
(Harmonized system of quality assessment for electronic components - Basic specification - X-ray inspection of electronic components) |
| BS EN 100014-1988 |
電子器件質量評定協調體系.基礎規范:CECC評估處理的一般程序(60%置信限) |
(Harmonized system of quality assessment for electronic components - Basic specification: CECC assessed process average procedure (60% confidence limit)) |
| BS EN 100015-2-1994 |
基本規范.靜電靈敏度裝置的維護.低濕度條件的要求 |
(Basic specification - Protection of electrostatic sensitive devices - Requirements for low humidity conditions) |
| BS EN 100015-3-1994 |
基本規范:靜電靈敏裝置的維護.無菌室地區的要求 |
(Basic specification - Protection of electrostatic sensitive devices - Requirements for clean room areas) |
| BS EN 100015-4-1994 |
基本規范:靜電靈敏度裝置的維護.高壓環境的要求 |
(Basic specification - Protection of electrostatic sensitive devices - Requirements for high voltage environments) |
| BS EN 10002-1-2001 |
金屬材料的拉伸試驗.常溫試驗方法 |
(Tensile testing of metallic materials - Method of test at ambient temperature) |
| BS EN 10002-5-1992 |
金屬材料拉伸試驗.第5部分:高溫試驗方法 |
(Tensile testing of metallic materials - Method of test at elevated temperatures) |
| BS EN 100114-1-1997 |
程序規則.質量認證程序.第1部分:生產廠家及其它機構的認可 |
(Rule of Procedure 14 - Quality assessment procedures - CECC requirements for the approval of an organization) |
| BS EN 100114-6-1997 |
程序規則.質量認證程序.第6部分:電子件生產廠家的技術認可 |
(CECC Quality assessment procedure for electronic components - Technology approval of electronic component manufacturers) |
| BS EN 10016-1-1995 |
拉拔和/或冷軋用非合金鋼棒.一般要求 |
(Non-alloy steel rods for drawing and/or cold rolling - General requirements) |
| BS EN 10016-2-1995 |
拉拔和/或冷軋用非合金鋼棒.一般用途鋼棒的專門要求 |
(Non-alloy steel rods for drawing and/or cold rolling - Specific requirements for general purpose rod) |
| BS EN 10016-3-1995 |
拉拔和/或冷軋用非合金鋼棒.沸騰和沸騰代用低碳鋼棒的特殊要求 |
(Non-alloy steel rods for drawing and/or cold rolling - Specific requirements for rimmed and rimmed substitute low carbon steel rod) |
| BS EN 10016-4-1995 |
拉制和/或冷滾軋非合金鋼棒材.專用棒材的特殊要求 |
(Non-alloy steel rods for drawing and/or cold rolling - Specific requirements for rod for special applications) |
| BS EN 10017-2004 |
拉制和/或冷軋制鋼棒.尺寸和公差 |
|
| BS EN 10017-2004 |
拉制和/或冷軋制鋼棒.尺寸和公差 |
|
| BS EN 10021-1993 |
鋼鐵制品的一般交貨技術條件 |
(General technical delivery requirements for steel and iron products) |
| BS EN 10024-1995 |
斜緣工字型熱軋鋼.形狀和尺寸公差 |
(Hot rolled taper flange I sections - Tolerances on shape and dimensions) |
| BS EN 10025-1-2004 |
結構鋼熱軋制品.一般交貨技術條件 |
|
| BS EN 10025-1993 |
非合金結構鋼熱軋制品.交貨技術條件 |
(Hot rolled products of non-alloy structural steels - Technical delivery conditions) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com