標準號 |
中文名稱 |
英文名稱 |
| BS 9210 N001-1-1975 |
(BNC型)射頻連接器的詳細規范.50Ω的密封、焊接、靜態接觸.全面評定級 |
(Detail specification for radio frequency connectors (type BNC) - Sealed, soldered, captive contact, 50 ohms - Full assessment level) |
| BS 9210 N007-1-1976 |
(SMB型)射頻連接器的詳細規范.不密封、焊接、靜態接觸、50Ω、插入式連接.全面評定級 |
(Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 ohms, snap-on couplings - Full assessment level) |
| BS 9210 N007-2-1976 |
(SMB型)射頻連接器的詳細規范.不密封、焊接、靜態接觸、50Ω、插入式連接.控制圖.配合面詳圖和測量數據 |
(Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 ohms, snap-on couplings - Control drawings - Mating face details and gauge information) |
| BS 9210-1984 |
經質量評定的射頻連接器規范:通用數據和試驗方法 |
(Specification for radio frequency connectors of assessed quality: generic data and methods of test) |
| BS 9220 N001-1971 |
普通矩形(2:1)剛性波導管詳細規范.標準壁厚度.一般應用范圍 |
(Detail specification for ordinary rectangular (2:1) rigid waveguide tubing - Standard wall thickness - General application category) |
| BS 9220 N002-1971 |
中扁矩形(4:1)波導管詳細規范.標準壁厚度.一般應用范圍 |
(Detail specification for medium flat rectangular (4:1) rigid waveguide tubing - Standard wall thickness - General application category) |
| BS 9220 N003-1971 |
扁矩形(8.33:1)波導管詳細規范.標準壁厚度.一般應用范圍 |
(Detail specification for flat rectangular (8.33:1) rigid waveguide tubing - Standard wall thickness - General application category) |
| BS 9220 N004-1971 |
圓形波導管詳細規范.標準壁厚度.一般應用范圍 |
(Detail specification for circular rigid waveguide tubing - Standard wall thickness - General application category) |
| BS 9220-1971 |
經質量評定的剛性波導管規范.和通用數據和試驗方法 |
(Specification for rigid waveguide tubing of assessed quality: generic data and methods of test) |
| BS 923-1-1990 |
高壓試驗技術導則.第1部分:總則 |
(Guide on high-voltage testing techniques - General) |
| BS 93-1951 |
尺寸為OB.A.至16B.A.的英國協會(B.A.)螺紋與公差規范 |
(Specification for British Association (B.A.) screw threads with tolerances for sizes 0 B.A. to 16 B.A.) |
| BS 9300 C199-276-1971 |
硅穩壓二極管詳細規范 |
(Detail specification for silicon voltage-regulator diodes) |
| BS 9300 C377-378-1971 |
硅同軸混合二極管詳細規范 |
(Detail specifications for silicon coaxial mixer diodes) |
| BS 9300 C379-388-1971 |
硅螺桿式大功率整流二極管詳細規范 |
(Detail specifications for silicon stud mounted, power rectifier diodes) |
| BS 9300 C405-429-1971 |
硅穩壓管詳細規范 |
(Detail specifications for silicon voltage-regulator diodes) |
| BS 9300 C476-1973 |
硅雪崩整流二極管詳細規范 |
(Detail specification for silicon avalanche rectifier diode) |
| BS 9300 C534-1971 |
硅同軸電阻開關二極管詳細規范 |
(Detail specification for silicon coaxial resistive switching diode) |
| BS 9300 C582-584-1971 |
反向閉鎖可控硅三極管詳細規范 |
(Detail specifications for reverse blocking triode thyristors) |
| BS 9300 C599-1971 |
棒狀硅微波開關二極管詳細規范 |
(Detail specification for silicon microwave switching diode, rod mounted) |
| BS 9300 C667-668-1971 |
硅雪崩整流二極管詳細規范 |
(Detail specification for silicon avalanche rectifier diodes) |
| BS 9300 C678-721-1971 |
硅穩壓二極管詳細規范 |
(Detail specification for silicon voltage regulator diodes) |
| BS 9300 C762-1971 |
X頻帶用混頻二極管詳細規范 |
(Detail specification for mixer diodes for use at X-band frequencies) |
| BS 9300 C771-772-1971 |
同軸混頻二極管詳細規范 |
(Detail specification for coaxial mixer diodes) |
| BS 9300 C776-777-1971 |
鍺同軸混頻二極管詳細規范 |
(Detail specification for germanium coaxial mixer diodes) |
| BS 9300 C778-1971 |
鍺同軸混頻二極管配對用詳細規范 |
(Detail specification for a matched pair of germanium coaxial mixer diodes) |
| BS 9300 C780-831-1971 |
硅穩壓二極管詳細規范 |
(Detail specification for silicon voltage regulator diodes) |
| BS 9300 C841-849-1971 |
硅穩壓二極管詳細規范 |
(Detail specification for silicon voltage regulator diodes) |
| BS 9301 N002-1971 |
通用硅信號二極管詳細規范.150mA、150V、密封、玻璃封裝.一般應用范圍Q |
(Detail specification for general purpose silicon signal diodes - 150 mA, 150 V, hermetically sealed, glass encapsulation - General application category Q) |
| BS 9305 N001-1972 |
硅穩壓二極管詳細規范.1.5W、3.3-33V(5%)、密封.一般應用范圍Q |
(Detail specification for silicon voltage regulator diodes - 1.5 W, 3.3 to 33 V (5%), hermetically sealed - General application category Q) |
| BS 9305 N041-1972 |
硅穩壓二極管詳細規范.400mW、2.7-33V(5％)、密封、玻璃封裝.一般應用范圍 |
(Detail specification for silicon voltage regulator diodes - 400 mW, 2.7 to 33 V (5%), hermetically sealed, glass encapsulation - General application category Q) |
| BS 9305 N042-1972 |
硅穩壓二極管詳細規范.1.5,6.8-200V(5%)、密封.一般應用范圍Q |
(Detail specification for silicon voltage regulator diodes - 1.5 W, 6.8 to 200 V (5%), hermetically sealed - General application category C) |
| BS 9305 N044-1974 |
硅穩壓二極管詳細規范.1.0W，3.3-33V(5％)、密封.全面評定級 |
(Detail specification for silicon voltage regulator diodes - 1.0 W, 3.3 to 33 V (5%), hermetically sealed - Full assessment level) |
| BS 9364 N007 and N009-1978 |
小功率硅N-P-N型開關晶體管詳細規范.20V、平面外延、無殼、密封封裝.全面附加評定級 |
(Detail specification for low power silicon n-p-n switching transistors - 20 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level) |
| BS 9364 N008 and N010-1978 |
小功率硅N-P-N型開關晶體管詳細規范.20V、平面外延、額定環境條件、密封封裝(長引線型).全面附加評定級 |
(Detail specification for low power silicon n-p-n switching transistors - 20 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level) |
| BS 9364 N011-1978 |
小功率硅P-N-P型開關晶體管詳細規范.65V、平面外延、無殼、密封封裝、全面附加評定級 |
(Detail specification for low power silicon p-n-p switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level) |
| BS 9364 N012-1978 |
小功率硅P-N-P型開關晶體管詳細規范.65V、平面外延、規定環境條件、密封封裝(長引線型).全面和附加評定級 |
(Detail specification for low power silicon p-n-p switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level) |
| BS 9364 N013-1979 |
小功率硅P-N-P型開關晶體管詳細規范.25V、平面外延、無殼、密封封裝、全面附加評定級 |
(Detail specification for low power silicon p-n-p switching transistors - 25 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level) |
| BS 9364 N016-1979 |
小功率硅P-N-P型開關晶體管詳細規范.65V、平面外延、無殼、密封封裝.全面附加評定級 |
(Detail specification for low power silicon n-p-n switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level) |
| BS 9364 N017-1979 |
小功率硅n-p-n型開關晶體管詳細規范.65V、平面外延、額定環境條件、密封封裝(長引線型).全面附加評定級 |
(Detail specification for low power silicon n-p-n switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level) |
| BS 939-1977 |
工程角尺(包括圓柱直角規和矩形角尺)規范 |
(Specification for engineers’ squares (including cylindrical and block squares)) |
| BS 9430-1978 |
經質量評定的集成電路詳細規范的制訂規則.調壓器.全面評定級 |
(Rules for the preparation of detail specifications for integrated circuits of assessed quality: voltage regulators - Full assessment level) |
| BS 9450-1998 |
經質量評定的(能力鑒定程序)集成電路與微型組件規范.通用數據和試驗方法 |
(Specification for integrated electronic circuits and micro-assemblies of assessed quality (capability approval procedures) - Generic data and methods of test) |
| BS 946-1970 |
紗線命名方法 |
(Method for the designation of yarns) |
| BS 947-1970 |
表示紡織品線密度的通用方式(特?cái)?shù)制)規范 |
(Specification for a universal system for designating linear density of textiles (Tex system)) |
| BS 949-1-1992 |
絲錐.第1部分:一般尺寸規范 |
(Screwing taps - Specification of general dimensions) |
| BS 949-2-1992 |
絲錐.統一標準細螺紋絲錐規范:制造公差 |
(Screwing taps - Specification for Unified ground thread taps: manufacturing tolerances) |
| BS 949-3-1993 |
絲錐.管螺紋絲錐規范 |
(Screwing taps - Specification for pipe thread taps) |
| BS 949-4-1990 |
絲錐.第4部分:米制磨牙絲錐規范:制造公差 |
(Screwing taps - Specification for metric ground thread taps: manufacturing tolerances) |
| BS 949-5-1990 |
絲錐.第5部分:命名和術語 |
(Screwing taps - Nomenclature and terminology) |
| BS 9490-1975 |
經質量評定的數字集成電路詳細規范的制定規則.全面評定級 |
(Rules for the preparation of detail specifications for digital integrated circuits of assessed quality - Full assessment level) |
| BS 9493-1981 |
經質量評定的有混頻數字和/或模擬功能的集成電路詳細規范的制訂規則 |
(Rules for the preparation of detail specifications for integrated circuits of assessed quality which perform mixed digital and/or analogue functions) |
| BS 950-1-1967 |
顏色評定用人造日光規范.第1部分:顏色匹配與顏色鑒定用照明器 |
(Specification for artificial daylight for the assessment of colour - Illuminant for colour matching and colour appraisal) |
| BS 950-2-1967 |
顏色評定用人造日光規范.第2部分:書畫業的觀察條件 |
(Specification for artificial daylight for the assessment of colour - Viewing conditions for the graphic arts industry) |
| BS 951-1999 |
接地.接地和搭接用夾具規范 |
(Electrical earthing - Clamps for earthing and bonding - Specification) |
| BS 952-1-1995 |
裝配用玻璃.分類 |
(Glass for glazing - Classification) |
| BS 952-2-1980 |
裝配用玻璃.第2部分:玻璃作業用用名詞術語 |
(Glass for glazing - Terminology for work on glass) |
| BS 9520-1983 |
經質量評定的直流和低頻用電連接器:一般數據、試驗方法和性能鑒定程序 |
(Specification for electrical connectors of assessed quality for d.c. and low frequency application: generic data, methods of test and capability approval procedures) |
| BS 9521-1983 |
經質量評定的如同BS9520所規定的電連接器可移動接觸器規范.一般數據、試驗方法和詳細規范的制定規則 |
(Specification for removable contacts of assessed quality for electrical connectors as defined by BS 9520: generic data, methods of test and rules for the preparation of detail specifications) |
| BS 9522 N0001-1982 |
直流和低壓用多觸頭圓形電連接器詳細規范、帶有前面可脫扣后面可拆卸的交合觸點的卡口接頭.全面評定級 |
(Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling with front release, rear removable crimp contacts - Full assessment lev) |
| BS 9522 N0003-1990 |
直流和低頻用多觸頭圓形電連接器詳細規范. 帶后面可插入、后面松脫、后面可卸壓接觸點的無檔板密封、耐環境 |
() |
| BS 9522-1990 |
經質量評定的直流和低頻用圓形連接器詳細規范的制定規則.全面和基本評定級 |
(Rules for the preparation of detail specifications for circular electrical connectors of assessed quality for d.c. and low frequency applications - Full, basic and full plus airframe assessment levels) |
| BS 9523-1984 |
直流和低頻用經質量評定的整體金屬殼矩形電連接器詳細規范的制定規則.全面和基本評定級 |
(Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with integral metal housings for d.c. and low frequency applications - Full and basic asses) |
| BS 9524-1984 |
直流和低頻用經質量評定的模壓體矩形電連接器詳細規范的制定規則.全面和基本評定級 |
(Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with moulded bodies for d.c. and low frequency applications - Full and basic assessment lev) |
| BS 9525 N0001-1982 |
多觸點兩件式印制電路板連接器的詳細規范 |
(Detail specification for multi-contact two-part printed board electrical connectors) |
| BS 9525-1984 |
直流和低頻用經質量評定的兩件式印制電路板插接器和轉接裝置詳細規范的制訂規則.全面和基本評定級 |
(Rules for the preparation of detail specifications for two-part printed board electrical connectors and board-mounted transition devices of assessed quality for d.c. and l.f. applications: full and ba) |
| BS 9526 N0001-1978 |
閉端單邊或雙邊多觸針邊緣插座插接器(觸針可替換、整個電路板敷有焊料或引線繞曲終端)詳細規范.全面評定級 |
(Detail specification for multi-contact edge socket electrical connectors - Single or double sided, closed ended, replaceable contacts, through-board solder or wire wrap terminations - Full assessment) |
| BS 9526 N0002-1979 |
多觸點邊緣插座插接器詳細規范.單邊或多邊、開口、金屬固定法蘭、 導鍵定位、換位觸點、穿板焊接或引線繞曲 |
(Detail specification for multi-contact edge socket electrical connectors - Single or double sided, open ended, metal fixing flanges, guide key location, replaceable contacts, through-board solder or w) |
| BS 9526 N0003-1979 |
多觸點邊緣插座插接器詳細規范.單邊或多邊、開口、導鍵定位、換位觸點、穿板焊接或引線繞曲接線柱.全面評定 |
(Detail specification for multi-contact edge socket electrical connectors - Single or double sided, open ended, guide key location, replaceable contacts, through-board solder or wire wrap terminations) |
| BS 9561-1979 |
經質量評定的操縱開關.一般數據和試驗方法.詳細規范制定的一般規則 |
(Specification for lever operated switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications) |
| BS 9563-1979 |
經質量評定的旋轉(手動)開關:一般數據和試驗方法:詳細規范制定的一般規則 |
(Specification for rotary (manual) switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications) |
| BS 9564-1980 |
經質量評定的按鈕開關規范.一般數據和試驗方法.詳細規范制定的一般規則 |
(Specification for push-button switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications) |
| BS 9566-1984 |
印制電路板程序開關詳細規范的制定規則 |
(Rules for the preparation of detail specifications for printed board programming switches) |
| BS 957-1-1941 |
測隙規規范.第1部分:英制單位 |
(Specification for feeler gauges - Inch units) |
| BS 957-2-1969 |
測隙規規范.第2部分:米制單位 |
(Specification for feeler gauges - Metric units) |
| BS 958-1968 |
精密工程用酒精水準儀規范 |
(Specification for spirit levels for use in precision engineering) |
| BS 959-1951 |
內徑千分尺(包括杠桿式千分尺)規范 |
(Specification for internal micrometers (including stick micrometers)) |
| BS 9612 N004-1977 |
經質量評定的振蕩器用冷焊封石英晶體振子詳細規范.DN,47 U/2,DQ和DP外殼,0.8至20MHz和3.0到30MHz頻率范圍. |
() |
| BS 9612 N005-1977 |
經質量評定的振蕩器用冷焊封石英晶體振子詳細規范.DN、DQ和DP外殼、0.8至20MHz和3.0到30MHz頻率范圍.基波厚 |
() |
| BS 9612 N006-1977 |
經質量評定的振蕩器用冷焊封石英晶體振子詳細規范.DN、47U/2、DQ和DP外殼,17至75MHz頻率范圍.三次諧波厚度 |
() |
| BS 9612 N007-1977 |
經質量評定的振蕩器用冷焊封石英晶體振子詳細規范.DN、DQ和DP外殼,17至75MHz頻率范圍.三次諧波厚度切變振蕩 |
() |
| BS 9612 N008-1977 |
經質量評定的振蕩器用冷焊封石英晶體振子詳細規范.DN、DQ和DP外殼,50至125MHz頻率規范.五次諧波厚度切變振 |
() |
| BS 9612 N009-1977 |
經質量評定的振蕩器用冷焊封石英晶體振子詳細規范.DN、DQ和DP外殼,50至125MHz頻率規范.五次諧波厚度切變振 |
() |
| BS 9612 N010-1979 |
經質量評定的振蕩器用冷焊封石英晶體振子詳細規范.DN、DQ和DP外殼,50至125MHz頻率范圍.基波厚度切變振蕩、 |
() |
| BS 9612 N016-1979 |
經質量評定的振蕩器用冷焊封石英晶體振子詳細規范.DN、D2、DQ和DP外殼,0.8至20MHz和3.0到30MHz頻率范圍.基 |
() |
| BS 9612 N017-1979 |
經質量評定的振蕩器用冷焊封石英晶體振子詳細規范.DN、D2、DQ和DP外殼,0.8至20MHz和3.0到30MHz頻率范圍.基 |
() |
| BS 9612 N018-1979 |
振蕩器用電阻焊密封石英晶體振子詳細規范.DN、D2、DQ和DP外殼、17至75MHz頻率范圍.三次諧波厚度切變振蕩模 |
() |
| BS 9612 N019-1979 |
經質量評定的振蕩器用冷焊封石英晶體振子詳細規范.DN、D2、DQ和DP外殼,17至75MHz頻率范圍.三次諧波厚度切變 |
() |
| BS 9612 N020-1979 |
經質量評定的振蕩器用冷焊封石英晶體振子詳細規范.DN、D2、DQ和DP外殼,17至75MHz頻率范圍.五次諧波厚度切變 |
() |
| BS 9612 N021-1979 |
經質量評定的振蕩器用冷焊封石英晶體振子詳細規范.DN、D2、DQ和DP外殼,50至125MHz頻率范圍.五次諧波厚度切 |
() |
| BS 9617-1982 |
經質量評定的石英晶體振子空白詳細規范的制定規則.全面評定級 |
(Rules for the preparation of detail specifications for quartz crystal units of assessed quality - Full assessment level) |
| BS 9625-1983 |
經質量評定的石英晶體振子空白詳細規范.全面評定級 |
(Blank detail specification for quartz crystal oscillators of assessed quality: full assessment level) |
| BS 969-1982 |
普通極限量規的極限和公差規范 |
(Specification for limits and tolerances on plain limit gauges) |
| BS 9720-1989 |
經質量評定的定制變壓器和電感器:通用數據和試驗方法 |
(Specification for custom-built transformers and inductors of assessed quality: generic data and methods of test) |
| BS 9721-1985 |
經質量評定的電子設備用信號變壓器分規范 |
(Sectional specification for signal transformers of assessed quality for use in electronic equipment for capability approval) |
| BS 9727-1985 |
經質量評定的電子設備用電源變壓器分規范:基本評定級 |
(Sectional specification for power transformers of assessed quality for use in electronic equipment for capability approval) |
| BS 9733-1985 |
經質量評定的電子設備用脈沖變壓器分規范 |
(Sectional specification for pulse transformers of assessed quality for use in electronic equipment for capability approval) |
| BS 9741-1986 |
經質量評定的電子設備用電感器分規范 |
(Sectional specification for inductors of assessed quality for use in electronic equipment for capability approval) |
| BS 975-1987 |
硝酸水溶液的密度.成分表 |
(Schedule for density-composition tables for aqueous solutions of nitric acid) |
| BS 9751 N0001-1980 |
固定絕緣(無屏蔽)射頻電感器詳細規范.線繞、鐵粉或酚醛圓柱形.全面評定級 |
(Detail specification for fixed insulated (unshielded) radio frequency inductors - Wire wound on ferrite, iron dust or phenolic cylindrical former - Full assessment level) |
| BS 9751-1979 |
固定絕緣(無屏蔽)射頻電感器空白詳細規范.全面評定級 |
(Blank detail specification for fixed insulated (unshielded) r.f. inductors at the full assessment level) |
| BS 9753-1986 |
經質量評定的電子設備用可變射頻型電感器分規范 |
(Sectional specification for variable r.f. type inductors of assessed quality for use in electronic equipment for capability approval) |
| BS 976-1987 |
鹽酸水溶液的密度.成分表 |
(Schedule for density-composition tables for aqueous solutions of hydrochloric acid) |
| BS 9760-1978 |
評估質量的印制電路規范.一般數據和試驗方法.性能認可程序與規則 |
(Specification for printed circuits of assessed quality: generic data and methods of test: capability approval procedure and rules) |
| BS 9761-1988 |
經質量評定的帶穿透鍍膜孔的多層剛性印制電路板制造商性能鑒定用分規范 |
(Sectional specification for capability approval of manufacturers of multilayer rigid printed wiring boards of assessed quality with plated through holes) |
| BS 9762-1988 |
級質量評定的帶穿透鍍膜孔的雙面硬性印刷電路板制造商性能鑒定用分規范 |
(Sectional specification for capability approval of manufacture of double-sided rigid printed wiring boards of assessed quality with plated through holes) |
| BS 9763-1988 |
經質量評定的無穿透鍍膜孔的單面和雙面印制電路板制造商性能鑒定用的分規范 |
(Sectional specification for capability approval of manufacturers of single- or double-sided printed wiring boards of assessed quality without plated through holes) |
| BS 9764-1988 |
經質量評定的無穿透鍍膜孔連接的有或無硬化成份材料的單面或雙面撓性印制電路板制造商性能鑒定用的分規范 |
(Sectional specification for capability approval of manufacturers of single- or double-sided flexible printed wiring boards of assessed quality without through hole connections and with or without rigi) |
| BS 9765-1988 |
經質量評定的帶穿透鍍膜孔連接的有或無硬化成分材料的雙面撓性印制電路板制造商性能鑒定用的分規范 |
(Sectional specification for capability approval of manufacturers of double-sided flexible printed wiring boards of assessed quality with through hole connections and with or without rigidizing compone) |
| BS 978-1-1968 |
小齒距齒輪.第1部分:漸開線直齒和斜齒齒輪 |
(Specification for fine pitch gears - Involute spur and helical gears) |
| BS 978-2 Addendum No. 1-1959 |
儀器和類似時鐘機構裝置用齒輪.擺線齒輪.雙環弧型齒輪 |
(Gears for instruments and clockwork mechanisms - Cycloidal type gears - Double circular arc type gears) |
| BS 978-2-1952 |
小齒距齒輪.第2部分:擺線齒輪 |
(Specification for fine pitch gears - Cycloidal type gears) |
| BS 978-3-1952 |
小齒距齒輪.第3部分:傘齒輪 |
(Specification for fine pitch gears - Bevel gears) |
| BS 984-1990 |
編織與地毯用紗零售包裝凈重的測定方法 |
(Method for determination of net mass of retail packages of knitting and rug yarns) |
| BS 9925 Pt.02.01 and Pt.02.02- |
電子器件質量評定的綜合協調體系.通信用電感器和變壓器鐵心.第2部分:空白詳細規范:寬帶變壓器的磁性氧化 |
(Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Blank detail specification: magnetic oxide cores for broad-band transformers) |
| BS 9925-0-1984 |
電子器件用經質量評定的綜合協調體系.通信用變壓器和電感器導體.第0部分:總規范 |
(Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Generic specification) |
| BS 9925-01.0-1984 |
電子器件用經質量評定的綜合協調體系.通信用變壓器和電感器鐵心.第1部分:分規范:電感器用鐵氧體磁心 |
(Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Sectional specification: magnetic oxide cores for inductor applications) |
| BS 9925-01.01-1984 |
電子器質量評定的綜合協調體系.通信用變壓器和電感器鐵心.第1部分:空白詳細規范:電感器用鐵氧體磁心.第1 |
(Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Blank detail specification: magnetic oxide cores for inductor applications -) |
| BS 9925-02.0-1987 |
電子器件用經質量評定的綜合協調體系.通信用變壓器和電感器鐵心.第2部分:分規范:寬帶變壓器用鐵氧體磁心 |
(Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Sectional specification: magnetic oxide cores for broad-band transformers) |
| BS 9925-03.0-1988 |
電子器件用經質量評定的綜合協調體系.通信用變壓器和電感器鐵心.第3部分:分規范:電力用變壓器和扼流圈的 |
(Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Sectional specification: Magnetic oxide cores for transformers and chokes fo) |
| BS 9925-03.01-1988 |
電子器件質量評定的綜合協調體系.通信用變壓器和電感器磁心.第3部分:空白詳細規范:電力變壓器和扼流圈用 |
(Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Blank detail specification: magnetic oxide cores for transformers and chokes) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com