標準號 |
中文名稱 |
英文名稱 |
| BS 5117-0-1992 |
發動機濃縮冷卻劑.(抗凍劑)的防腐蝕試驗.第0部分:概述 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - General introduction |
| BS 5117-1.1-1985 |
發動機濃縮冷卻劑(抗凍劑)的腐蝕抑制試驗.第1部分:測定物理和化學特性的試驗方法.第1.1節:輔助方法 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for determination of physical and chemical properties - Ancillary procedures |
| BS 5117-1.2-1985 |
發動機濃縮冷卻劑(“抗凍劑“)的腐蝕抑制試驗.第1部分:測定物理和化學特性的試驗方法.第1.2節:沸點測定 |
(Testing corrosion inhibiting, engine coolant concentrate (’antifreeze’) - Methods of test for determination of physical and chemical properties - Determination of boiling point) |
| BS 5117-1.3-1985 |
發動機濃縮冷卻劑(抗凍劑)的腐蝕抑制試驗.第1部分:測定物理和化學特性的試驗方法.第1.3節:凍結點測定 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for determination of physical and chemical properties - Determination of freezing point |
| BS 5117-1.4-1985 |
發動機濃縮冷卻劑(抗凍劑)的腐蝕抑制試驗.第1部分:測定物理和化學特性的試驗方法.第1.4節:發泡特性測定 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for determination of physical and chemical properties - Determination of foaming characteristics |
| BS 5117-1.5-1992 |
防腐蝕試驗.發動機濃縮冷卻劑(防凍劑).第1部分:測定物理和化學特性的試驗方法.第5節:冷卻硬水穩定性試驗 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for determination of physical and chemical properties - Coolant hard water stability test |
| BS 5117-2.1-1985 |
發動機濃縮冷卻劑(抗凍劑)的腐蝕抑制試驗.第2部分:腐蝕抑制性能試驗方法.第2.1節:一般方法 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for corrosion inhibition performance - General procedures |
| BS 5117-2.2-1985 |
發動機濃縮冷卻劑(抗凍劑)的腐蝕抑制試驗.第2部分:腐蝕抑制性能試驗方法.第2.2節:玻璃器皿試驗 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for corrosion inhibition performance - Glassware tests |
| BS 5117-2.4-1985 |
發動機濃縮冷卻劑(抗凍劑)的腐蝕抑制試驗.第2部分:腐蝕抑制性能試驗方法.第2.4節:靜態發動機試驗 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for corrosion inhibition performance - Static engine test |
| BS 5117-2.5-1985 |
發動機濃縮冷卻劑(“抗凍劑“)的腐蝕抑制試驗.第2部分:腐蝕抑制性能試驗方法.第2.5節:現場試驗 |
(Testing corrosion inhibiting, engine coolant concentrate (’antifreeze’) - Methods of test for corrosion inhibition performance - Field test) |
| BS 5117-2.6-1992 |
防腐蝕試驗.發動機濃縮冷卻劑(防凍劑).第2部分:防腐蝕性能試驗方法.第6節:熱交換條件下鑄鋁合金的防腐蝕試驗 |
Testing corrosion inhibiting, engine coolant concentrate (`antifreeze`) - Methods of test for corrosion inhibition performance - Test for corrosion of cast aluminium alloys under heat-transfer conditions |
| BS 5122-1986 |
低壓和中壓飽和蒸汽用橡膠軟管規范 |
Specification for rubber hoses for low-pressure and medium-pressure saturated steam |
| BS 5125-1990 |
煤礦用50A650V阻燃、保險和螺栓連接的插頭和插座規范 |
(Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines) |
| BS 5126-1-1993 |
1100V以下系統用礦山型阻燃式電源和控制裝置.第1部分:直接起動器規范 迷諶嘟渙韉緶飛 |
(Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for direct-on-line motor starters) |
| BS 5126-2-1993 |
1100V以下系統用礦山型阻燃式電源和控制裝置.第2部分:斷路器裝置規范 |
(Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for circuit breaker units) |
| BS 5126-3-1993 |
1100V 以下系統用礦山型阻燃式電源和控制裝置.第3部分:照明用空冷變壓器裝置規范 |
(Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for air-cooled lighting transformer units) |
| BS 5126-4-1993 |
1100V以下系統用礦山型阻燃式電源和控制裝置.第4部分:鉆機供電裝置的空冷變壓器規范 |
(Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for air-cooled transformers to power drilling machines) |
| BS 5127-1974 |
沙發床和床墊用聚烯烴帶規范 |
(Specification for polyolefin webbing for divans and bed bases) |
| BS 5128-1974 |
書畫用薄膜尺寸規范 |
(Specification for sizes of film for graphic arts use) |
| BS 5131-0-1991 |
鞋靴和鞋靴材料試驗方法.第0部分:概述 |
(Methods of test for footwear and footwear materials - General introduction) |
| BS 5131-1.1-1991 |
鞋靴和鞋靴材料試驗方法.第1部分:粘合劑.第1節:粘合縫耐熱性(蠕變試驗) |
(Methods of test for footwear and footwear materials - Adhesives - Resistance of adhesive joints to heat (creep test)) |
| BS 5131-1.2-1991 |
鞋靴和鞋靴材料試驗方法.第1部分:粘合劑.第2節:粘合縫耐剝離試驗 |
(Methods of test for footwear and footwear materials - Adhesives - Resistance of adhesive joints to peeling) |
| BS 5131-1.3-1991 |
鞋靴和鞋靴材料試驗方法.第1部分:粘合劑.第3節:對粘合劑(熱熔粘合劑除外)進行耐熱性(蠕變)和剝離試驗時試樣 |
(Methods of test for footwear and footwear materials - Adhesives - Preparation of test assemblies using adhesives (other than hot melt adhesives) for heat resistance (creep) and peel tests) |
| BS 5131-1.6-1979 |
鞋靴和鞋靴材料試驗方法.粘合劑.對膠粘結合進行耐熱性或耐剝離性試驗前的推薦環境儲存條件 |
(Methods of test for footwear and footwear materials - Adhesives - Recommended environmental storage conditions for adhesive joints prior to heat resistance or peeling tests) |
| BS 5131-1.7-1991 |
鞋靴和鞋靴材料試驗方法.第1部分:粘合劑.第7節:耐熱性(蠕變)和耐劑剝離性試驗用施加熱熔膠粘劑試驗組件的制 |
(Methods of test for footwear and footwear materials - Adhesives - Preparation of test assemblies using hot melt adhesives for heat resistance (creep) and peel tests) |
| BS 5131-1.8-1981 |
鞋靴和鞋靴材料試驗方法.第1部分:膠粘劑.第8節:耐久熱熔膠粘劑抗剪結合強度發育速度 |
(Methods of test for footwear and footwear materials - Adhesives - Rate of bond strength development in shear of hot melt adhesives for lasting) |
| BS 5131-1.9-1985 |
鞋靴和鞋靴材料試驗方法.第1部分:膠粘劑.第9節:膠粘結合原始強度的測量 |
(Methods of test for footwear and footwear materials - Adhesives - Measurement of green strength of adhesive joints) |
| BS 5131-2.1-1991 |
鞋靴和鞋靴材料試驗方法.第2部分:鞋底.第1節:鞋底材料抗切口延伸用羅斯氏屈繞法 |
Methods of test for footwear and footwear materials - Solings - Ross flexing method for cut growth resistance of soling materials |
| BS 5131-2.11-1983 |
鞋靴和鞋靴材料試驗方法.第2部分:鞋底.第11節:鞋底與熱表面短時接觸的耐熱性 |
(Methods of test for footwear and footwear materials - Solings - Resistance of solings to short-term contact with a hot surface) |
| BS 5131-2.7-1980 |
鞋靴和鞋靴材料試驗方法.第2部分:鞋底.第7節:鞋底材料物理試驗用試樣的制備 |
(Methods of test for footwear and footwear materials - Solings - The preparation of test pieces from soling materials for physical testing) |
| BS 5131-3.1-1991 |
鞋靴和鞋靴材料試驗方法.第3部分:鞋幫、織物和縫線.第1節:垂直于針腳孔的鞋襯鞋幫材料強度 |
(Methods of test for footwear and footwear materials - Uppers, textiles and threads - Strength of upper materials and lining materials at right angles to stitch perforations) |
| BS 5131-3.4-1978 |
鞋靴和鞋靴材料試驗方法.鞋幫、織物和縫線.垂直于針腳孔的鞋幫材料強度 |
(Methods of test for footwear and footwear materials - Uppers, textiles and threads - Edgewise compressibility, upper materials) |
| BS 5131-3.5-1978 |
鞋靴和鞋靴材料試驗方法.鞋幫、織物和縫線.斷裂/中空試驗 |
(Methods of test for footwear and footwear materials - Uppers, textiles and threads - The break/pipiness test) |
| BS 5131-3.6-1991 |
鞋靴和鞋靴材料試驗方法.第3部分:鞋幫、織物和縫線.第6節:鞋帶的耐磨性 |
(Methods of test for footwear and footwear materials - Uppers, textiles and threads - Abrasion resistance of shoe laces) |
| BS 5131-3.7-1991 |
鞋靴和鞋靴材料試驗方法.第3部分:鞋幫、織物和縫線.第7節:鞋帶的斷裂強度 |
(Methods of test for footwear and footwear materials - Uppers, textiles and threads - Breaking strength of shoe laces) |
| BS 5131-4.1-1975 |
鞋靴和鞋靴材料試驗方法.其他部件.內底紙板的耐脫落性 |
(Methods of test for footwear and footwear materials - Other components - Resistance to peeling of insole board) |
| BS 5131-4.2-1990 |
鞋靴和鞋靴材料試驗方法.其它部件.纖維板的彎曲指數 |
(Methods of test for footwear and footwear materials - Other components - Flexing index of fibreboard) |
| BS 5131-4.20-1985 |
鞋靴和鞋靴材料試驗方法.第4部分:其他部件.第20節:拔出鞋后跟釘子所需的力 |
(Methods of test for footwear and footwear materials - Other components - Force required to pull heel pins out of shoe heels) |
| BS 5131-4.5-1990 |
鞋靴和鞋靴材料試驗方法.第4部分:其他部件.第5節:纖維紙板的抗拉強度 |
(Methods of test for footwear and footwear materials - Other components - Tensile strength of fibreboard) |
| BS 5131-4.6-1975 |
鞋靴和鞋靴材料試驗方法.其他部件.內底粘附助條的抗剪強度 |
(Methods of test for footwear and footwear materials - Other components - Shear strength of ribs stuck to insoles) |
| BS 5131-4.7-1975 |
鞋靴和鞋靴材料試驗方法.其他部件.內底粘附助條的耐脫落性 |
(Methods of test for footwear and footwear materials - Other components - Resistance to peeling of ribs stuck to insoles) |
| BS 5131-4.8-1990 |
鞋靴和鞋靴材料的試驗方法.其它部件.女鞋鞋跟的側面抗沖擊試驗 |
(Methods of test for footwear and footwear materials - Other components - Resistance of heels of ladies’ shoes to lateral impact) |
| BS 5131-4.9-1991 |
鞋靴和鞋靴材料試驗方法.第4部分:其他部件.第9節:女鞋后跟的耐疲勞性 |
(Methods of test for footwear and footwear materials - Other components - Fatigue resistance of heels of ladies’ shoes) |
| BS 5131-5.1-1991 |
鞋靴和鞋靴材料試驗方法.第5部分:成品鞋靴試驗.第1節:粘膠外底和模壓外底的粘合力 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Adhesion of stuck-on and moulded-on soles) |
| BS 5131-5.11-1981 |
鞋子和鞋料的試驗方法.第5部分:成品鞋靴試驗.第11節:扣系組件強度的測定 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Determination of the strength of buckle fastening assemblies) |
| BS 5131-5.13-1980 |
鞋靴和鞋靴材料試驗方法.成品鞋靴試驗.鞋幫和襯里材料縫合牢度的測量 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Measurement of the strength of stitched seams in upper and lining materials) |
| BS 5131-5.2-1991 |
鞋靴和鞋靴材料試驗方法.第5部分:成品鞋靴試驗.第2節:模壓橡膠外底的硫化度 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Degree of vulcanization of moulded-on rubber soles) |
| BS 5131-5.3-1990 |
鞋靴和鞋靴材料試驗方法.第5部分:成品鞋靴試驗.第3節:成品鞋靴的耐熱性 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Resistance of complete footwear to heat) |
| BS 5131-5.4-1978 |
鞋靴和鞋靴材料試驗方法.成品鞋靴試驗.外靴鞋底粘接的剝離強度 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Sole bond peeling strength) |
| BS 5131-5.6-1991 |
鞋靴和鞋靴材料試驗方法.第5部分:成品鞋靴試驗.第6節:硬鞋底部件和鞋底的沖擊試驗 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Impact test for rigid units and shoe bottoms) |
| BS 5131-5.7-1978 |
鞋子和鞋料的試驗方法.第5部分:成品鞋靴試驗.第7節:硬鞋底部件和鞋底的疲勞試驗 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Fatigue test for rigid units and shoe bottoms) |
| BS 5131-5.9-1979 |
鞋靴和鞋靴材料試驗方法.成品鞋靴試驗.鞋后跟掌面的強度 |
(Methods of test for footwear and footwear materials - Testing of complete footwear - Strength of top piece attachment to shoe heels) |
| BS 5131-6.1-1981 |
鞋靴和鞋靴材料試驗方法.實用規范.通過材料、部件和結構的穿著試驗進行對比評價 |
(Methods of test for footwear and footwear materials - Codes of practice - Code of practice for the comparative evaluation by wear trial of materials, components or constructions) |
| BS 5131-6.2-1979 |
鞋靴和鞋靴材料試驗方法.實用規范.在鞋靴穿著試驗中對設計或結構上的主要缺點進行鑒別和適用性評價的實用規 |
(Methods of test for footwear and footwear materials - Codes of practice - Code of practice for the identification in footwear wear trials of major weaknesses in design or construction and the assessme) |
| BS 5138-1974 |
成品機制整體鍛造和落鍛沖壓曲軸的磁粉探傷規范 |
(Specification for magnetic particle flaw inspection of finished machined solid forged and drop stamped crankshafts) |
| BS 5139-1991 |
一般用途模塑和擠塑聚丙烯和丙烯共聚物材料規范的制定方法 |
(Method of specifying general purpose polypropylene and propylene copolymer materials for moulding and extrusion) |
| BS 5141-1-1975 |
空氣加熱和冷卻蛇管規范.第1部分:評價冷卻蛇管的試驗方法 |
(Specification for air heating and cooling coils - Method of testing for rating of cooling coils) |
| BS 5141-2-1977 |
空氣加熱和冷卻蛇管規范.第2部分:評價加熱蛇管的試驗方法 |
(Specification for air heating and cooling coils - Method of testing for rating of heating coils) |
| BS 5142-1974 |
標準電池規范 |
(Specification for standard cells) |
| BS 5158-1989 |
鑄鐵旋塞閥規范 |
(Specification for cast iron plug valves) |
| BS 5159-1974 |
通用鑄鐵和碳鋼球閥規范 |
(Specification for cast iron and carbon steel ball valves for general purposes) |
| BS 5163-1986 |
水廠用雙法蘭鑄鐵楔形閘閥規范 |
(Specification for predominantly key-operated cast iron gate valves for waterworks purposes) |
| BS 5164-1975 |
間接動作的電指示和記錄儀表及附件規范 |
(Specification for indirect-acting electrical indicating and recording instruments and their accessories) |
| BS 5167-1978 |
洗衣粉和清潔劑的包裝.纖維板盒及筒的尺寸和容積 |
(Packages for washing and cleaning powders - Dimensions and volumes of cartons and drums from fibreboard) |
| BS 5168-1975 |
流變學名詞術語詞匯 |
(Glossary of rheological terms) |
| BS 5169-1992 |
熔焊鋼儲氣罐規范 |
(Specification for fusion welded steel air receivers) |
| BS 5171-1974 |
結網線規范:水浸后長度變化的測定 |
(Specification for netting yarns: determination of change in length after immersion in water) |
| BS 5173-100-1992 |
橡膠和塑料軟管及軟管組件的試驗方法.第100部分:一般介紹 |
Method of test for rubber and plastics hoses and hose assemblies - General introduction |
| BS 5173-102.10-1990 |
橡膠和塑料軟管組件的試驗方法.液壓試驗.吸油和泄水軟管的靜液壓試驗 |
Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Hydrostatic tests for oil suction and discharge hose |
| BS 5173-102.3-1988 |
橡膠和塑料軟管及軟管組件的試驗方法.第102部分:液壓試驗.第3節:燃料分配泵軟管的體積膨脹的測定 |
(Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of fuel-dispensing pump hoses) |
| BS 5173-102.4-1990 |
橡膠和塑料軟管組件的試驗方法.液壓試驗.液壓軟管體積膨脹的測定 |
Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of hydraulic hoses |
| BS 5173-102.8-1987 |
橡膠和塑料軟管及軟管組件的試驗方法.第102部分:液壓試驗.第8節:硬質螺紋增強熱塑性塑料管的壓力脈沖試驗 |
Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Pressure impulse test for rigid helix reinforced thermoplastics hoses |
| BS 5173-103.13-1994 |
橡膠和塑料軟管與軟管組件的試驗方法.物理試驗.抗燃性測定 |
Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of resistance to fire |
| BS 5173-103.2-1990 |
橡膠和塑料軟管組件的試驗方法.物理試驗.軟管耐磨損性的測定 |
Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of crush resistance of hoses |
| BS 5173-103.6-1990 |
橡膠和塑料軟管組件的試驗方法.物理試驗.襯料可燃性測定 |
Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of ignitability of lining |
| BS 5173-103.7-1991 |
橡膠和塑料軟管組件的試驗方法.物理試驗.熱塑軟管用剛性聚合物螺紋鋼筋耐斷裂性測定 |
Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of fracture resistance of rigid polymer helical reinforcement in thermoplastics hoses |
| BS 5173-106.2-1990 |
橡膠和塑料軟管組件的試驗方法.環境試驗.高溫老化試驗的一般要求 |
(Methods of test for rubber and plastics hoses and hose assemblies - Environmental tests - General requirements for high temperature ageing tests) |
| BS 5176-1975 |
硫化橡膠的分級系統規范 |
Specification for classification system for vulcanized rubbers |
| BS 5176-2003 |
硫化橡膠的分類體系.規范 |
(Classification system for vulcanized rubbers - Specification) |
| BS 5182-1975 |
用纖維圖形儀測定精紡裝置加工的羊毛纖維長度的方法 |
Method for the measurement of the length of wool fibres processed on the worsted system, using a fibre diagram machine |
| BS 5186-1975 |
軸的中心高度規范 |
Specification for shaft centre heights |
| BS 5188-1990 |
容積達1.4L、直徑為85mm的液化或壓縮不可燃?xì)怏w用的一次性金屬容器 |
Specification for non-refillable metallic containers up to 1.4 litres capacity and 85 mm diameter for liquefied or compressed non-flammable gases |
| BS 5189-3-1975 |
牙科鑄造包埋料.第3部分:硅酸乙酯粘結的牙科鑄造包埋料 |
Dental casting investments - Ethyl silicate-bonded investment materials |
| BS 519-1950 |
鐵路信號用銜鐵上升式直流中性極化線路繼電器規范 |
Specification for tractive armature direct current neutral-polar line relays for railway signalling |
| BS 5190-1985 |
擠奶器用管濾器、濾體和濾清件規范 |
(Specification for pipeline filters, filter bodies and filter elements for milking installations) |
| BS 5191-1975 |
生產計劃和管理的術語詞匯 |
(Glossary of production planning and control terms) |
| BS 5191-2004 |
生產計劃和控制.詞匯 |
|
| BS 5192-1-1993 |
生產管理導則.第1部分:序言 |
(Guide to production control - Introduction) |
| BS 5192-2-1993 |
生產管理導則.第2部分:生產規劃 |
(Guide to production control - Production programming) |
| BS 5192-3-1993 |
生產管理導則.第3部分:定貨法 |
(Guide to production control - Ordering methods) |
| BS 5192-4-1993 |
生產管理導則.調度(職場控制) |
(Guide to production control - Dispatching (shop-floor control)) |
| BS 5192-5-1993 |
生產管理導則.第5部分:生產管理和其他管理功能間的相互關系 |
(Guide to production control - The relationship between production control and other management functions) |
| BS 5192-6-1993 |
生產管理導則.第6部分:計算機輔助生產管理 |
(Guide to production control - Computer aided production control) |
| BS 5193-1991 |
涂料用磷酸鋅顏料規范 |
(Specification for zinc phosphate pigments for paints) |
| BS 5194-1-1991 |
外科器械.第1部分:不銹鋼規范 |
(Surgical instruments. Specification for stainless steel) |
| BS 5194-2-1990 |
外科器械.第2部分:帶球形樞軸頸器械(不包括切割器械)規范 |
(Surgical instruments - Specification for instruments with pivot joints (excluding cutting instruments)) |
| BS 5194-3-1986 |
外科器械.第3部分:解剖鑷子規范 |
(Surgical instruments - Specification for dissecting forceps) |
| BS 5194-4-1986 |
外科器械.第4部分:小剪刀、大剪刀和其他有關節的切割器械 |
(Surgical instruments - Specification for scissors, shears and other jointed cutting instruments) |
| BS 5200-1997 |
水管接頭和附件的尺寸規范 |
(Specification for dimensions of hydraulic connectors and adaptors) |
| BS 5202-1-2000 |
煙葉和煙草制品的化學分析方法.可溶于鹽酸的硅殘留物的測定 |
(Methods for chemical analysis of tobacco and tobacco products - Determination of silicated residues insoluble in hydrochloric acid) |
| BS 5202-10-2001 |
煙葉和煙草制品的化學分析方法.有機氯農藥殘留物的測定(氣相色譜法) |
Methods for chemical analysis of tobacco and tobacco products - Determination of organochlorine pesticide residues (gas chromatographic method) |
| BS 5202-11-1983 |
煙葉和煙草制品的化學分析方法.第11部分:二硫代氨基甲酸酯殘留物的測定 |
(Methods for chemical analysis of tobacco and tobacco products - Determination of dithiocarbamate residues) |
| BS 5202-12-2000 |
煙草和煙草制品的化學分析方法.卷煙的煙霧冷凝物中煙堿含量的測定(氣相色譜法) |
Methods for chemical analysis of tobacco and tobacco products - Determination of nicotine in smoke condensate of cigarettes (gas-chromatographic method) |
| BS 5202-13-2000 |
煙草和煙草制品的化學分析方法.卷煙煙霧冷凝物中水的測定(氣相色譜法) |
Methods for chemical analysis of tobacco and tobacco products - Determination of water in smoke condensate of cigarettes (gas chromatographic method) |
| BS 5202-14-2000 |
卷煙和卷煙制品的化學分析方法.使用卷煙煙霧常規分析器測定總散粒物和無尼古丁干散粒物 |
Methods for chemical analysis of tobacco and tobacco products - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine |
| BS 5202-15-1994 |
煙草和煙草制品的化學分析方法.卷煙煙濃縮物中水的測定(卡爾費歇爾法) |
Methods for chemical analysis of tobacco and tobacco products - Determination of water in smoke condensates of cigarettes (Karl Fischer method) |
| BS 5202-16-1996 |
煙葉和煙草制品的化學分析方法.第16部分:卷煙霧相煙霧中一氧化碳的測定(非色散紅外分析法) |
Methods for chemical analysis of tobacco and tobacco products - Determination of carbon monoxide in the vapour phase of cigarette smoke (NDIR method) |
| BS 5202-17-1997 |
煙草和煙草制品的化學分析方法.煙堿純度的測定.(重量計法) |
Methods for chemical analysis of tobacco and tobacco products - Determination of nicotine purity (gravimetric method using tungstosilicic acid) |
| BS 5202-18-1997 |
煙葉和煙草制品的化學分析方法.第18部分:空氣中汽態煙堿的測定(氣相色譜法) |
(Methods for chemical analysis of tobacco and tobacco products - Determination of vapour-phase nicotine in air (gas-chromatographic method)) |
| BS 5202-19-1998 |
煙葉和煙草制品的化學分析方法.水含量的測定 |
Methods for chemical analysis of tobacco and tobacco products - Determination of water content (Karl Fischer method) |
| BS 5202-1998 |
煙葉和煙草制品的化學分析方法.水含量的測定(Karl Ficher法) |
Methods for chemical analysis of tobacco and tobacco products. Determination of water content (Karl Fischer method) |
| BS 5202-9-1992 |
煙草和煙草制品的化學分析方法.第9部分:卷煙中生物堿滯留量的測定 |
(Methods for chemical analysis of tobacco and tobacco products - Determination of alkaloid retention by filters of cigarettes (spectrometric method)) |
| BS 5204-1-1975 |
直尺規范.第1部分:鑄鐵直尺(弓形與I型剖面) |
(Specification for straightedges - Cast iron straightedges (bow shaped and I-section)) |
| BS 5204-2-1977 |
直尺規范.第2部分:鋼質或花崗巖矩形截面直尺 |
(Specification for straightedges - Steel or granite straightedges of rectangular section) |
| BS 5207-1975 |
電氣設備用六氟化硫規范 |
(Specification for sulphur hexafluoride for electrical equipment) |
| BS 5208-1975 |
小型內燃機用動力輸出軸和安裝面的尺寸規范 |
(Specification for dimensions of power take-off driving shafts and mounting faces for small internal combustion engines) |
| BS 5209-1975 |
電氣設備中六氟化硫的試驗規程 |
(Code of practice for the testing of sulphur hexafluoride taken from electrical equipment) |
| BS 5210-1975 |
閃爍器的標準尺寸規范 |
(Specification for standard dimensions of scintillators) |
| BS 5212-1-1990 |
混凝土路面用冷施填封劑裝置.第1部分:填封劑規范 |
(Cold applied joint sealant systems for concrete pavements - Specification for joint sealants) |
| BS 5212-2-1990 |
混凝土路面.冷施填封劑裝置.第2部分:填封劑施用實用規程 |
(Cold applied joint sealant systems for concrete pavements - Code of practice for the application and use of joint sealants) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com