標準號 |
中文名稱 |
英文名稱 |
| BS ISO 8434-3-2005 |
用于液壓傳動和一般用途的金屬管接頭.O形圈端面密封管接頭 |
|
| BS ISO 8439-1991 |
格式設計.基本形式 |
Forms design - Basic layout |
| BS ISO 844-2001 |
泡沫塑料.硬質材料的壓縮試驗.規范 |
Cellular plastics - Compression test for rigid materials - Specification |
| BS ISO 844-2004 |
硬性泡沫塑料.壓縮性能的測定 |
|
| BS ISO 844-2004 |
硬性泡沫塑料.壓縮性能的測定 |
|
| BS ISO 8443-1999 |
滾動軸承.帶法蘭外圈的徑向滾珠軸承.法蘭尺寸 |
Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions |
| BS ISO 8459-2-1993 |
信息和文獻.書目數據字典.檢索應用 |
Information and documentation - Bibliographic data element directory - Acquisitions applications |
| BS ISO 8459-3-1995 |
信息和文獻.書目數據字典.信息檢索應用 |
Information and documentation - Bibliographic data element directory - Information retrieval applications |
| BS ISO 8486-1-1997 |
粘合磨料.粒度分布的測定和名稱與符號.第1部分:粒度從F4至F220 |
(Bond abrasives - Determination and designation of grain size distribution - Macrogrits F4 to F220) |
| BS ISO 8486-2-1997 |
粘合磨料.粒度分布的測定、名稱與符號.第2部分:粒度從F230至F1200 |
Bond abrasives - Determination and designation of grain size distribution - Macrogrits F230 to F1200 |
| BS ISO 8503-5-2003 |
涂裝油漆和有關產品前鋼材預處理.噴射清理鋼材的表面粗糙度特性.表面輪廓測定的復制帶法 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Replica tape method for the determination of t) |
| BS ISO 8514-1-2000 |
縮微攝影技術.字母數字計算機輸出縮微品.質量控制.試驗滑片和試驗數據的特征 |
Micrographics - Alphanumeric computer output microforms - Quality control - Characteristics of the test slide and test data |
| BS ISO 8514-2-2000 |
顯微攝影.字母數字計算機輸出縮微品.質量控制.方法 |
Micrographics - Alphanumeric computer output microforms - Quality control - Method |
| BS ISO 8529-1-2001 |
基準中子輻射.特性和生產方法 |
Reference neutron radiations - Characteristics and methods of production |
| BS ISO 8529-2-2001 |
標準中子輻射.與以輻射場為表征的基本量有關的輻射保護裝置的校準規則 |
Reference neutron radiations - Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field |
| BS ISO 8529-3-1999 |
標準中子輻射.第3部分:區域及個人劑量計的校正和對中子能功能及入射角的反應測定 |
Reference neutron radiations - Calibration of area and personal dosimeters and determination of their response as a function of neutron energy and angle of incidence |
| BS ISO 8532-1997 |
證券.證券號碼傳輸格式 |
Securities - Format for transmission of certificate numbers |
| BS ISO 8535-1-1997 |
壓燃式發動機.高壓噴射燃油管用的鋼管.無縫冷拔單壁管的要求 |
Compression ignition engines - Steel tubes for high pressure fuel injection pipes - Requirements for seamless cold drawn single wall tubes |
| BS ISO 8535-2-2004 |
壓燃式發動機.高壓燃油噴管用鋼管.合成管的要求 |
|
| BS ISO 8536-5-2004 |
醫用輸液器具.一次性使用的重力輸液滴定管式輸液器 |
|
| BS ISO 8543-1998 |
鋪地織物.質量(物質)測定方法 |
Textile floor coverings - Methods for determination of mass |
| BS ISO 8548-4-1998 |
修復術和矯形學.肢缺陷.導致切斷的原因描述 |
Prosthetics and orthotics - Limb deficiencies - Description of causal conditions leading to amputation |
| BS ISO 8548-5-2003 |
修復術和矯形學.肢缺陷.實施切除手術的病人的臨床狀況描述 |
(Prosthetics and orthotics - Limb deficiencies - Description of the clinical condition of the person who has had an amputation) |
| BS ISO 855-2003 |
用壓榨法獲得的檸檬油 |
(Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression) |
| BS ISO 8551-2003 |
修復術和矯形學.功能缺陷.將進行矯形的病人、臨床處理目標和矯形功能要求的描述 |
(Prosthetics and orthotics - Functional deficiencies - Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis) |
| BS ISO 8552-2004 |
牛奶.嗜冷營養微生物的估測.21鳦時菌落計數技術(快速法) |
|
| BS ISO 8566-4-1998 |
起重機.駕駛室.第3部分:懸臂式起重機 |
(Cranes - Cabins - Jib cranes) |
| BS ISO 8567-2003 |
電影.35mm和16mm電影發行拷貝上說明字幕的最大允許區域.尺寸和位置 |
(Cinematography - Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints - Position and dimensions) |
| BS ISO 8573-1-2001 |
一般用途壓縮空氣.雜質和純度等級 |
Compressed air for general use - Contaminants and purity classes |
| BS ISO 8573-2-1996 |
通用壓縮空氣.氣溶膠油含量的測定試驗法 |
Compressed air for general use - Test methods for aerosol oil content |
| BS ISO 8573-3-1999 |
一般用壓縮空氣.潮濕度測定的試驗方法 |
Compressed air for general use - Test methods for measurement of humidity |
| BS ISO 8573-4-2001 |
一般用途的壓縮空氣.固體顆粒含量的試驗方法 |
Compressed air for general use - Test methods for solid particle content |
| BS ISO 8573-5-2002 |
一般用壓縮空氣.油汽和有機溶劑含量的試驗方法 |
Compressed air for general use - Test methods for oil vapour and organic solvent content |
| BS ISO 8573-6-2003 |
一般用途壓縮空氣.氣體污染物含量的試驗方法 |
(Compressed air for general use - Test methods for gaseous contaminant content) |
| BS ISO 8573-7-2003 |
壓縮空氣.活微生物雜質含量的試驗方法 |
(Compressed air for general use - Test method for viable microbiological contaminant content) |
| BS ISO 8573-8-2004 |
一般用途壓縮空氣.通過質量濃度測定固體顆粒含量的試驗方法 |
|
| BS ISO 8573-9-2004 |
一般用途壓縮空氣.液體水含量的試驗方法 |
|
| BS ISO 8579-1-2002 |
齒輪裝置驗收規程.空氣噪聲試驗規程 |
Acceptance code for gear units - Test code for airborne sound |
| BS ISO 8581-1995 |
攝影技術.電子閃光設備.同步線連接器 |
Photography - Electronic flash equipment - Connectors to synchro-cord |
| BS ISO 8584-1-1998 |
工業用承壓熱塑性塑料管.耐化學性系數和基本應力的測定.聚烯烴管 |
Thermoplastics pipes for industrial applications under pressure - Determination of the chemical resistance factor and of the basic stress - Polyolefin pipes |
| BS ISO 8590-1995 |
電影攝影技術.在帶有磁條的70mm電影發行拷貝上的錄音.錄音特性 |
(Cinematography - Audio records on 70 mm motion picture release prints with magnetic stripes - Recorded characteristic) |
| BS ISO 8600-1-1997 |
光學和光學儀器.醫療內診鏡和內診鏡附件.第1部分:一般要求 |
Optics and optical instruments - Medical endoscopes and endoscopic accessories - General requirements |
| BS ISO 8600-1-2005 |
光學和光子學.醫用內窺鏡和內療器件.一般要求 |
|
| BS ISO 8600-2-2002 |
光學和光學儀器.醫療內診鏡和內診鏡附件.對剛性支氣管的特殊要求 |
Optics and optical instruments - Medical endoscopes and endoscopic accessories - Particular requirements for rigid bronchoscopes |
| BS ISO 8600-4-1997 |
光學和光學儀器.醫療內診鏡和內診鏡附件.內段最大寬度的測定 |
Optics and optical instruments - Medical endoscopes and endoscopic accessories - Determination of maximum width of insertion portion |
| BS ISO 8600-5-2005 |
光學和光子學.醫用內窺鏡和內療器件.剛性光學內窺鏡的光學分辨率測定 |
|
| BS ISO 8600-6-2005 |
光學和光子學.醫用內窺鏡和內療器件.詞匯 |
|
| BS ISO 8601-2005 |
數據和交換格式.信息交換.日期和時間表示法 |
|
| BS ISO 8605-2001 |
玻璃纖維增強塑料.片狀成型料.基礎規范 |
Textile-glass-reinforced plastics - Sheet moulding compound (SMC) - Basis for specification |
| BS ISO 8611-1995 |
貨物聯運用普通平托盤.試驗方法 |
General-purpose flat pallets for through transit of goods - Test methods |
| BS ISO 8622-1998 |
電影技術.70mm電影發行拷貝上的磁性錄音.A-通路重放特性 |
Cinematography - Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes - A-chain reproduction characteristics |
| BS ISO 8640-1-1993 |
紡織機械和附件.平經針織機.詞匯. 針織傳動機構、支持和編織機件 |
Textile machinery and accessories - Flat warp knitting machines - Vocabulary - Driving mechanisms, supports and knitting elements |
| BS ISO 8640-1-2004 |
紡織機械與附件.平型經編機.詞匯.基礎結構和成圈機件的詞匯 |
|
| BS ISO 8640-2-1993 |
紡織機械和附件.平經針織機.詞匯.第2部分:送經、織物卷取和卷布 |
Textile machinery and accessories - Flat warp knitting machines - Vocabulary - Warp let-off, fabric take-up and batching |
| BS ISO 8640-2-2004 |
紡織機械與附件.平型經編機.詞匯.送經、織物卷取和卷布詞匯 |
|
| BS ISO 8640-3-2002 |
紡織機械和附件.平經針織機.詞匯. 繪圖裝置詞匯 |
Textile machinery and accessories - Flat warp knitting machines - Vocabulary - Vocabulary of patterning devices |
| BS ISO 8660-2002 |
塑料.己內酰胺的高錳酸鹽吸收指數的側定.光譜分析法 |
Plastics - Determination of permanganate absorption number of caprolactam - Spectrometric method |
| BS ISO 8670-3-2000 |
造口術收集袋.結腸造口術和回腸造口術收集袋的氣味傳遞測定 |
Ostomy collection bags - Determination of odour transmission of colostomy and ileostomy bags |
| BS ISO 8693-1999 |
制模工具.扁頂桿 |
Tools for moulding - Flat ejector pins |
| BS ISO 8694-1998 |
鑄模工具.帶肩的脫模頂銷 |
Tools for moulding - Shouldered ejector pins |
| BS ISO 8697-2000 |
原油和石油產品.運輸?shù)目捎?jì)算性.裝船數量和留在船上的數量的評定 |
Crude petroleum and petroleum products - Transfer accountability - Assessment of on board quantity (OBQ) and quantity remaining on board (ROB) |
| BS ISO 871-1997 |
塑料.熱空氣熔礦爐用的點燃溫度的測定 |
Plastics - Determination of ignition temperature using a hot-air furnace |
| BS ISO 8727-1997 |
機械振動和沖擊.人體防護.生物動力協調體系 |
Mechanical vibration and shock - Human exposure - Biodynamic coordinate systems |
| BS ISO 8730-1990 |
銀行業務.對電文鑒定(批量)的要求 |
Banking. Requirements for message authentication (wholesale) |
| BS ISO 875-2001 |
香精油.與乙醇可混溶性的評定 |
Essential oils - Evaluation of miscibility in ethanol |
| BS ISO 8764-1-1999 |
螺釘和螺母用安裝工具.十字槽頭螺釘用旋具.驅動點 |
Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Driver points |
| BS ISO 8778-2003 |
氣壓傳動.標準參考大氣 |
(Pneumatic fluid power - Standard reference atmosphere) |
| BS ISO 8784-1-2005 |
紙漿、紙和紙板.微生物檢查.基于分解性新陳代謝的細菌、酵母菌和霉菌總數 |
|
| BS ISO 8788-2000 |
航空航天.螺母.米制.形狀和位置公差 |
Aerospace - Nuts, metric - Tolerances of form and position |
| BS ISO 8789-1995 |
摩托車中輸送液化石油氣用橡膠軟管和軟管組件規范 |
Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification |
| BS ISO 8791-3-2005 |
紙和紙板.粗糙度/平滑度的測定(漏氣法).謝菲爾德方法 |
|
| BS ISO 8791-3-2005 |
紙和紙板.粗糙度/平滑度的測定(漏氣法).謝菲爾德方法 |
|
| BS ISO 8802-12-1999 |
信息技術.系統之間通訊和信息交換.局域網和都市網.特殊要求.需求優先存取法.物理層和中繼站規格 |
Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Demand-priority access method, physical layer and repeater specifications |
| BS ISO 8805-2001 |
信息處理系統.計算機制圖.三維圖形核心系統(GKS-3D)功能描述 |
Information processing systems - Computer graphics - Graphical kernel system for three dimensions (GKS-3D) functional description |
| BS ISO 885-2000 |
一般用途螺栓和螺釘.米制系列.頭部與桿的連接處的圓半徑 |
General purpose bolts and screws - Metric series - Radii under the head |
| BS ISO 8886-1999 |
信息技術.開放系統互連.數據鏈服務定義 |
Information technology - Open systems interconnection - Data link service definition |
| BS ISO 8893-1998 |
林業機械.手提式刷鋸.發動機的性能和燃料消耗 |
Forestry machinery - Portable brush cutters and grass trimmers - Engine performance and fuel consumption |
| BS ISO 8899-2003 |
檸檬葉油 |
(Oil of lemon petitgrain [Citrus limon (L.) Burm. f.]) |
| BS ISO 8957-1997 |
信息和文獻工作.目錄信息交換用希伯來字母代碼字符集 |
Information and documentation - Hebrew alphabet coded character sets for bibliographic information interchange |
| BS ISO 8968-3-2004 |
牛乳.氮含量的測定.批溶解法(半微觀快速常規法) |
|
| BS ISO 897-2001 |
攝影技術.膠卷,126,110和135號膠片.載像面的鑒別 |
(Photography - Roll films, 126, 110 and 135- size films - Identification of the image-bearing side) |
| BS ISO 8976-2004 |
夾扭鉗和剪切鉗.水泵鉗.尺寸和試驗值 |
|
| BS ISO 8976-2004 |
夾扭鉗和剪切鉗.水泵鉗.尺寸和試驗值 |
|
| BS ISO 8977-2003 |
沖壓工具.沖模 |
Tools for pressing - Matrixes |
| BS ISO 8979-2004 |
電訊夾扭鉗和剪切鉗.術語 |
|
| BS ISO 8995-2002 |
室內工作場所的照明 |
Lighting of indoor work places |
| BS ISO 9000-2-1997 |
質量管理和質量保證標準.第2部分:ISO 9001,ISO 9002和ISO 9003應用總則 |
Quality management and quality assurance standards - Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 |
| BS ISO 9001-2001 |
ISO 9001-2000理解指南光盤 |
ISO 9001:2000 Insight Guidance CD |
| BS ISO 9019-1997 |
證券.證書標準號 |
Securities - Numbering of certificates |
| BS ISO 9022-1-1995 |
光學和光學儀表.環境試驗方法.試驗定義.程度 |
Optics and optical instruments - Environmental test methods - Definitions, extent of testing |
| BS ISO 9022-10-1998 |
光學和光學儀器.環境試驗方法.組合的正弦振動和干熱或干冷 |
Optics and optical instruments - Environmental test methods - Combined sinusoidal vibration and dry heat or cold |
| BS ISO 9022-11-1995 |
光學和光學儀表.環境試驗方法.模型寬度 |
Optics and optical instruments - Environmental test methods - Mould growth |
| BS ISO 9022-12-1995 |
光學和光學儀表.環境試驗方法.污染 |
Optics and optical instruments - Environmental test methods - Contamination |
| BS ISO 9022-13-1998 |
光學和光學儀器.環境試驗方法.組合的沖擊、碰撞或自由落體與干熱或干冷 |
Optics and optical instruments - Environmental test methods - Combined shock, bump or free fall and dry heat or cold |
| BS ISO 9022-14-1995 |
光學和光學儀表.環境試驗方法.露,白霜和冰 |
Optics and optical instruments - Environmental test methods - Dew, hoarfrost, ice |
| BS ISO 9022-15-1998 |
光學和光學儀器.環境試驗方法.組合的數控寬帶隨機振動和干熱或干冷 |
Optics and optical instruments - Environmental test methods - Combined digitally controlled broad-band random vibration and dry heat or cold |
| BS ISO 9022-16-1998 |
光學和光學儀器.環境試驗方法.組合的跳動或穩態加速與干熱或干冷 |
Optics and optical instruments - Environmental test methods - Combined bounce or steady-state acceleration and dry heat or cold |
| BS ISO 9022-17-1995 |
光學和光學儀表.環境試驗方法.污染和太陽輻射混合試驗 |
Optics and optical instruments - Environmental test methods - Combined contamination, solar radiation |
| BS ISO 9022-18-1995 |
光學和光學儀表.環境試驗方法.混合濕熱和低內壓力試驗 |
Optics and optical instruments - Environmental test methods - Combined damp heat and low internal pressure |
| BS ISO 9022-19-1995 |
光學和光學儀器.環境試驗方法.與正弦波振動或隨機振動組合的溫度循環 |
Optics and optical instruments - Environmental test methods - Temperature cycles combined with sinusoidal or random vibration |
| BS ISO 9022-1995 |
光學和光學儀器.環境試驗方法.與正弦波振動及無規振動組合的溫度循環 |
Optics and optical instruments. Environmental test methods. Temperature cycles combined with sinusoidal or random vibration |
| BS ISO 9022-2-2002 |
光學和光學儀器.環境試驗方法.冷、熱和潮氣 |
Optics and optical instruments - Environmental test methods - Cold, heat and humidity |
| BS ISO 9022-20-1997 |
光學和光學儀器.環境試驗方法.第20部分:含有硫化氫或二氧化硫的濕空氣 |
Optics and optical instruments - Environmental test methods - Humid atmosphere containing sulfur dioxide or hydrogen sulfide |
| BS ISO 9022-21-1998 |
光學和光學儀器.環境試驗方法.組合的低壓、室溫或干熱 |
Optics and optical instruments - Environmental test methods - Combined low pressure and ambient temperature or dry heat |
| BS ISO 9022-3-1998 |
光學和光學儀器.環境試驗方法.機械應力 |
Optics and optical instruments - Environmental test methods - Mechanical stress |
| BS ISO 9022-4-2002 |
光學和光學儀器.環境試驗方法.鹽霧 |
Optics and optical instruments - Environmental test methods - Salt mist |
| BS ISO 9022-5-1995 |
光學和光學儀表.環境試驗方法.冷和低氣壓試驗 |
Optics and optical instruments - Environmental test methods - Combined cold, low air pressure |
| BS ISO 9022-6-1995 |
光學和光學儀器.環境試驗方法.塵埃 |
Optics and optical instruments - Environmental test methods - Dust |
| BS ISO 9022-7-1995 |
光學和光學儀表.環境試驗方法.滴水和下雨試驗 |
Optics and optical instruments - Environmental test methods - Drip, rain |
| BS ISO 9022-8-1995 |
光學和光學儀表.環境試驗方法.高壓,低壓和浸入試驗 |
Optics and optical instruments - Environmental test methods - High pressure, low pressure, immersion |
| BS ISO 9022-9-1995 |
光學和光學儀表.環境試驗方法.太陽輻射 |
Optics and optical instruments - Environmental test methods - Solar radiation |
| BS ISO 9038-2002 |
液體的持續可燃性試驗 |
Test for sustained combustibility of liquids |
| BS ISO 9039-1995 |
光學及光學儀器.光學系統的質量評定.撓曲測定 |
Optics and optical instruments - Quality evaluation of optical systems - Determination of distortion |
| BS ISO 9044-2000 |
工業用金屬絲織物.技術要求和試驗 |
Industrial woven wire cloth - Technical requirements and testing |
| BS ISO 9056-1995 |
玻璃容器.防偷竊精加工系列.尺寸 |
Glass containers - Series of pilferproof finish - Dimensions |
| BS ISO 9057-1995 |
玻璃容器.加壓液體用28mm壓痕瓶口.尺寸 |
Glass containers - 28 mm tamper-evident finish for pressurized liquids - Dimensions |
| BS ISO 9058-1995 |
玻璃容器.公差 |
Glass containers - Tolerances |
| BS ISO 9073-11-2002 |
紡織品.非織造品的試驗方法.徑流量 |
Textiles - Test methods for nonwovens - Run-off |
| BS ISO 9073-12-2002 |
紡織品.非織造品的試驗方法.定值吸收 |
Textiles - Test methods for nonwovens - Demand absorbency |
| BS ISO 9073-6-2001 |
紡織品.非織造品的試驗方法.吸收 |
Textiles - Test methods for nonwovens - Absorption |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com