標準號 |
中文名稱 |
英文名稱 |
| BS IEC 62264-2-2005 |
企業控制系統一體化.對象模型屬性 |
|
| BS IEC 796-1-1991 |
微處理機系統總線.8位和16位數據多路總線I(MULTIBUSI).第1部分:電氣和定時特性功能描述 |
Microprocessor system bus - 8-bit and 16-bit data MULTIBUS I. Functional description with electrical and timing specifications |
| BS IEC 796-2-1991 |
微處理機系統總線.8位和16位數據多路總線Ⅰ.第2部分:具有邊緣連接器(直接式)的系統總線配置用機械和插腳描述 |
Microprocessor system bus - 8-bit and 16-bit data MULTIBUS I. Mechanical and pin descriptions for the system bus configuration, with edge connectors (direct) |
| BS IEC 796-3-1991 |
微處理機系統8位和16位數據多路總線Ⅰ.具有插腳和插座連接器(間接式)的歐洲卡配置用機械和插腳描述 |
(Microprocessor system bus - 8-bit and 16-bit data MULTIBUS I. Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors) |
| BS IEC 823-1991 |
微處理機系統總線(VMS總線).IEC 821總線(VME總線)的串行子系統總線 |
(Microprocessor system bus (VMSbus) - Serial sub-system bus of the IEC 821 bus (VMEbus)) |
| BS IEC TR 61334-5-2-1998 |
使用配電線荷載系統的自動化配電.低層輪廓.頻移鍵控(FSK)輪廓 |
(Distribution automation using distribution line carrier systems - Lower layer profiles - Lower layer profiles - Frequency shift keying (FSK) profile) |
| BS IEC TR 62157-2001 |
圓柱形加工的碳電極.標稱尺寸 |
Cylindrical machined carbon electrodes - Nominal dimensions |
| BS IEC TS 60034-18-34-2000 |
旋轉電機.絕緣系統的功能評定.模繞組線的試驗步驟.絕緣系統的熱機耐久性評定 |
Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| BS IEC TS 60695-9-2-2001 |
火災試驗.火焰表面擴散.試驗方法的概要及其相關方面 |
Fire hazard testing - Surface spread of flame - Summary and relevance of test methods |
| BS IEC TS 60825-6-1999 |
激光產品的安全性.排除用于傳到人眼的可見信息光源的產品安全性 |
Safety of laser products - Safety of laser products with optical sources, exclusively used for visible information transmission to the human eye |
| BS IEC TS 61813-2001 |
帶電工作.帶絕緣臂的架空設備的養護、維修和使用試驗 |
Live working - Care, maintenance and in-service testing of aerial devices with insulating booms |
| BS IEC/TR 61838-2001 |
核動力工廠.指令和控制功能分級用安全評價概率的使用 |
Nuclear power plants - Use of probabilistic safety asessment for the classification of instrumentation and control functions |
| BS IEC/TS 60695-8-2-2001 |
火災試驗.放熱.試驗方法的概要及其相關方面 |
Fire hazard testing - Heat release - Summary and relevance of test methods |
| BS ISO 1000-2004 |
SI單位及其倍數單位和一些其他單位應用的建議 |
|
| BS ISO 10002-2004 |
質量管理.用戶滿意度.機構中投訴處理指南 |
|
| BS ISO 10002-2004 |
質量管理.用戶滿意度.機構中投訴處理指南 |
|
| BS ISO 10005-1996 |
質量管理.質量計劃導則 |
Quality management - Guidelines for quality plans |
| BS ISO 10005-2005 |
質量管理體系.質量計劃指南 |
|
| BS ISO 10006-1998 |
質量管理.項目質量管理指南 |
Quality management - Guidelines to quality in project management |
| BS ISO 10006-2003 |
質量管理體系.項目的質量管理導則 |
(Quality management systems - Guidelines for quality management in projects) |
| BS ISO 10007-2003 |
質量管理體系.技術狀態管理指南 |
(Quality management systems - Guidelines for configuration management) |
| BS ISO 10012-2-1997 |
測量設備的質量保證.測量過程控制導則 |
Quality assurance for measuring equipment - Guidelines for control of measurement processes |
| BS ISO 10015-2000 |
質量管理.培訓導則 |
Quality management - Guidelines for training |
| BS ISO 10019-2005 |
質量管理體系顧問的選擇和享受其所提供服務的導則 |
|
| BS ISO 10044-1997 |
銀行和有關的財務服務設施.信息交流.押匯信用證形式 |
Banking and related financial services. Information interchange. Documentary credit form |
| BS ISO 10045-1993 |
高山雪橇.緊固安裝部位.試驗螺釘?shù)囊?/td>
| Alpine skis - Binding mounting area - Requirements for test screws |
| BS ISO 10054-1998 |
內燃壓燃式發動機.穩定狀態下發動機運轉產生煙霧的測量儀器.過濾型煙霧計 |
Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter type smokemeter |
| BS ISO 10056-2001 |
機械振動.鐵路車輛里乘客和乘務員全身振動的測量和分析 |
Mechanical vibration - Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles |
| BS ISO 10059-2-2004 |
致密、定型耐火制品.冷壓強度測定.有熱片試驗 |
|
| BS ISO 1007-2000 |
攝影技術.135號膠卷暗盒.規范 |
Photography - 135-size film and magazine - Specifications |
| BS ISO 10071-1-2001 |
壓印工具.球鎖式?jīng)_壓.輕載的球鎖式?jīng)_壓 |
Tools for pressing - Ball-lock punches - Ball-lock punches for light duty |
| BS ISO 10071-2-2005 |
沖壓工具.球形鎖緊沖床.用于重載荷的球形鎖緊沖床 |
|
| BS ISO 10072-2004 |
模鑄工具.澆口套.尺寸 |
|
| BS ISO 1008-1995 |
攝影技術.相紙尺寸.單張相紙 |
Photography - Paper dimensions - Pictorial sheets |
| BS ISO 10081-1-2003 |
致密定型耐火制品的分類.硅酸鋁 |
(Classification of dense shaped refractory products - Alumina-silica) |
| BS ISO 10081-2-2003 |
致密定型耐火制品的分類.含殘留碳小于7%的堿性制品 |
(Classification of dense shaped refractory products - Basic products containing less than 7 % residual carbon) |
| BS ISO 10081-3-2003 |
致密定型耐火制品的分類.含殘留碳7%-50%的堿性制品 |
(Classification of dense shaped refractory products - Basic products containing from 7 % to 50 % residual carbon) |
| BS ISO 10086-2-2004 |
煤.選煤用絮凝劑評價方法.旋轉真空過濾設備中作為助濾劑的絮凝劑 |
|
| BS ISO 10086-2-2004 |
煤.選煤用絮凝劑評價方法.旋轉真空過濾設備中作為助濾劑的絮凝劑 |
|
| BS ISO 1009-2001 |
攝影技術.相紙尺寸.印相機用卷紙 |
Photography - Paper dimensions - Rolls for printers |
| BS ISO 10099-2001 |
氣壓液動.氣液缸.最終檢驗和驗收標準 |
Pneumatic fluid power - Cylinders - Final examination and acceptance criteria |
| BS ISO 10100-2001 |
液壓傳動.液壓缸.驗收試驗 |
Hydraulic fluid power - Cylinders - Acceptance tests |
| BS ISO 10102-2001 |
螺釘和螺母用裝配工具.工程用雙頭開口扳手.扳手長度和端口厚度 |
Assembly tools for screws and nuts - Double-headed open-ended engineers` wrenches - Length of wrenches and thickness of the heads |
| BS ISO 10103-2001 |
螺釘和螺母用裝配工具.雙頭平直和彎頭套筒扳手.扳手長度和端口厚度 |
Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads |
| BS ISO 10104-2001 |
螺釘和螺母用裝配工具.雙頭高彎頭和改進的彎頭套筒扳手.扳手長度和端口厚度 |
Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads |
| BS ISO 10109-1-1995 |
光學和光學儀表.環境要求.通用信息,定義,氣候帶及其參數 |
Optics and optical instruments - Environmental requirements - General information, definitions, climatic zones and their parameters |
| BS ISO 10109-11-2001 |
光學和光學儀器.環境要求.戶外條件下使用的光學儀器 |
Optics and optical instruments - Environmental requirements - Optical instruments for outdoor conditions of use |
| BS ISO 10109-12-2004 |
光學和光學儀器.環境要求.光學儀器的運輸條件 |
|
| BS ISO 10109-4-2001 |
光學和光學儀器.環境要求.望遠鏡系統的試驗要求 |
Optics and optical instruments - Environmental requirements - Test requirements for telescopic systems |
| BS ISO 10109-6-1995 |
光學和光學儀表.環境要求.醫用光學裝置的試驗要求 |
Optics and optical instruments - Environmental requirements - Test requirements for medical optical devices |
| BS ISO 10109-7-2002 |
光學和光學儀器的環境要求.光學測量儀器的試驗要求 |
Optics and optical instruments - Environmental requirements - Test requirements for optical measuring instruments |
| BS ISO 10109-8-1995 |
光學和光學儀表.環境要求.使用極端條件的試驗要求 |
Optics and optical instruments - Environmental requirements - Test requirements for extreme conditions of use |
| BS ISO 10110-1-1996 |
光學及光學儀器.光學件和系統圖形的制備.第1部分:總則 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - General |
| BS ISO 10110-10-1996 |
光學及光學儀器.光學件和系統圖形的制備.第10部分:表示數據表 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Table representing data of a lens element |
| BS ISO 10110-11-1996 |
光學及光學儀器.光學件和系統圖形的制備.第11部分:不容許數據 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Non-toleranced data |
| BS ISO 10110-12-1997 |
光學及光學儀器.光學件和系統圖形的制備.第12部分:非球面形表面 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Aspheric surfaces |
| BS ISO 10110-13-1998 |
光學和光學儀器.光學件和系統圖形的制備.第13部分:激光輻射損壞閾 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold |
| BS ISO 10110-14-2003 |
光學和光學儀器.光學件和系統制圖準備.波前變形公差 |
(Optics and optical instruments - Preparation of drawings for optical elements and systems - Wavefront deformation tolerance) |
| BS ISO 10110-17-2004 |
光學和光學儀器.光學件和系統制圖準備.激光輻射損害閾 |
|
| BS ISO 10110-2-1996 |
光學及光學儀器.光學件和系統圖形的制備.第2部分:材料不完全性.應力雙折射 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Material imperfections - Stress birefringence |
| BS ISO 10110-3-1996 |
光學及光學儀器.光學件和系統圖形的制備.第3部分:材料不完全性.氣泡和雜質 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Material imperfections - Bubbles and inclusions |
| BS ISO 10110-4-1997 |
光學及光學儀器.光學件和系統圖形的制備.第4部分:不完備材料的不均勻性和擦痕 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Material imperfections - Inhomogeneity and striae |
| BS ISO 10110-5-1996 |
光學及光學儀器.光學件和系統圖形的制備.第5部分:表面形狀公差 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface form tolerances |
| BS ISO 10110-6-1996 |
光學及光學儀器.光學件和系統圖形的制備.第6部分:定中心公差 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Centring tolerances |
| BS ISO 10110-7-1996 |
光學及光學儀器.光學件和系統圖形的制備.第7部分:表面缺陷公差 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface imperfection tolerances |
| BS ISO 10110-8-1998 |
光學及光學儀器.光學件和系統圖形的制備.表面紋理 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface texture |
| BS ISO 10110-9-1996 |
光學及光學儀器.光學件和系統圖形的制備.第9部分:表面處理和涂層 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface treatment and coating |
| BS ISO 10119-2002 |
碳纖維.測定密度 |
Carbon fibre - Determination of density |
| BS ISO 1012-1999 |
攝影技術.普通軟片和膠卷.尺寸 |
Photography - Films in sheets and rolls for general use - Dimensions |
| BS ISO 10126-1-1992 |
銀行業務.電文加密(大批)程序.第1部分:一般原則 |
Banking - Procedures for message encipherment (wholesale) - General principles |
| BS ISO 10126-2-1992 |
銀行業務.第2部分:信息編碼程序(大規模).DEA算法 |
Banking - Procedures for message encipherment (wholesale) - DEA algorithm |
| BS ISO 10135-2001 |
技術繪圖.模件、鑄件和鍛壓件的簡化表示 |
Technical drawings - Simplified representation of moulded, cast and forged parts |
| BS ISO 10154-1995 |
薄壁金屬容器.三件向內卷曲頸馬口鐵氣溶劑罐.頂端尺寸 |
Light gauge metal containers - Three-piece necked-in tinplate aerosol cans - Dimensions of the top end |
| BS ISO 10155-1995 |
固定輻射源.顆粒的質量濃度的自動監控.性能特性、試驗方法和規范 |
Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications |
| BS ISO 10197-1994 |
顯微照相.顯微膠片閱讀-印相機.特性 |
Micrographics - Reader-printers for transparent microforms - Characteristics |
| BS ISO 10198-1994 |
縮微照相.16mm縮微膠卷用旋轉式攝影機.機械及光學特性 |
Micrographics - Rotary camera for 16 mm microfilm - Mechanical and optical characteristics |
| BS ISO 10202-2-1997 |
財務交易卡.集成電路卡財務交易系統的證券結構.第2部分:財務交易程序 |
Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Transaction process |
| BS ISO 10202-4-1997 |
金融交易卡.集成電路卡財務交易系統的證券結構.安全應用模塊 |
Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cards. Secure application modules |
| BS ISO 10202-5-1999 |
金融交易卡.使用集成電路卡的金融交易系統的安全結構.算法的使用 |
Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Use of algorithms |
| BS ISO 10202-7-1999 |
金融交易卡.使用集成電路卡的金融交易系統的安全結構.鍵管理 |
Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Key management |
| BS ISO 10202-8-1999 |
金融交易卡.使用集成電路卡的金融交易系統的安全結構.第8部分:一般原則和概述 |
Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - General principles and overview |
| BS ISO 10209-1-2001 |
技術產品文獻.詞匯.與技術制圖相關的術語.總則和制圖種類 |
Technical product documentation - Vocabulary - Terms relating to technical drawings: General and types of drawings |
| BS ISO 10223-1993 |
紡織機械.經編機.梳櫛標準號 |
(Textile machinery - Flat warp knitting machines - Numbering of guide bars) |
| BS ISO 10227-1997 |
人/人的代用品沖擊(單向沖擊)試驗和評價.技術現狀導則 |
(Human/human surrogate impact (single shock) testing and evaluation - Guidance on technical aspects) |
| BS ISO 10228-1993 |
越野雪橇.緊固安裝部位.試驗螺釘?shù)囊?/td>
| (Cross-country skis - Binding mounting area - Requirements for test screws) |
| BS ISO 10231-2003 |
摩托車輪胎.檢驗輪胎負荷的試驗方法 |
(Motorcycle tyres - Test methods for verifying tyre capabilities) |
| BS ISO 10242-1-1998 |
壓力設備.模柄.A型 |
(Tools for pressing - Punch holder shanks - Type A) |
| BS ISO 10245-4-2005 |
起重機.限制器和指示器.動臂起重機 |
|
| BS ISO 10270-1996 |
金屬及其合金的腐蝕.核動力反應堆用鋯合金的耐水腐蝕試驗 |
(Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors) |
| BS ISO 10290-1994 |
紡織材料.棉紗.規范 |
Textiles - Cotton yarns - Specifications |
| BS ISO 10294-1-1997 |
耐火試驗.空氣分配系統用火焰調節器.第1部分:試驗方法 |
Fire-resistance tests - Fire dampers for air distribution systems - Test method |
| BS ISO 10294-2-1999 |
耐火試驗.空氣分配系統用火焰調節器.試驗結果的應用領域標準和分類 |
Fire-resistance tests - Fire dampers for air distribution systems - Classification, criteria and field of application of test results |
| BS ISO 10294-3-1999 |
耐火試驗.空氣分配系統用火焰調節器.試驗方法指南 |
Fire-resistance tests - Fire dampers for air distribution systems - Guidance on the test method |
| BS ISO 10294-4-2001 |
耐火試驗.空氣分配系統用火焰調節器.熱釋放過程試驗 |
Fire-resistance tests - Fire dampers for air distribution systems - Test of thermal release mechanism |
| BS ISO 10294-5-2005 |
耐火試驗.用于空氣分配系統的防火閥.膨脹防火閥 |
|
| BS ISO 10299-2001 |
航空航天.固體鉚釘.材料和公制表示法 |
Aerospace - Rivets, solid - Material and metric series identification |
| BS ISO 10300-1-2001 |
傘齒輪負載容量的計算.說明及一般影響因素 |
(Calculation of load capacity of bevel gears - Calculation of load capacity of bevel gears - Introduction and general influence factors) |
| BS ISO 10300-2-2001 |
傘齒輪負載容量的計算.表面耐久性的計算(凹坑法) |
(Calculation of load capacity of bevel gears - Calculation of surface durability (pitting)) |
| BS ISO 10300-3-2001 |
傘齒輪負載能力的計算.齒根強度的計算 |
(Calculation of load capacity of bevel gears - Calculation of tooth root strength) |
| BS ISO 10303-1-1995 |
工業自動化系統和集成.產品數據表示和信息交流.綜述和基本原理 |
(Industrial automation systems and integration - Product data representation and exchange - Overview and fundamental principles) |
| BS ISO 10303-101-1995 |
工業自動化系統和集成.產品數據表示和信息交流.集成利用資源:制圖 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated application resources: Draughting) |
| BS ISO 10303-11-1995 |
工業自動化系統及集成.產品數據表示和交換.描述方法:EXPRESS語言參考手冊 |
(Industrial automation systems and integration - Product data representation and exchange - Description methods: the EXPRESS language reference manual) |
| BS ISO 10303-201-1995 |
工業自動化系統和集成.產品數據表示和信息交流.應用協議:制圖說明 |
(Industrial automation systems and integration - Product data representation and exchange - Application protocol: Explicit draughting) |
| BS ISO 10303-203-1996 |
工業自動化系統和集成電路.產品數據表示和信息交流.第203部分:利用協議:性位控制設計 |
(Industrial automation systems and integration - Product data representation and exchange - Application protocol - Configuration controlled design) |
| BS ISO 10303-21-1995 |
工業自動化系統和集成.產品數據表示和信息交流.執行方法:交換結構的明碼電文編碼 |
(Industrial automation systems and integration - Product data representation and exchange - Implementation methods - Clear text encoding of the exchange structure) |
| BS ISO 10303-22-1999 |
工業自動化系統和集成電路.產品數據表示和交換.實現方法.標準數據存取接口 |
(Industrial automation systems and integration - Product data representation and exchange - Implementation methods - Standard data access interface) |
| BS ISO 10303-31-1995 |
工業自動化系統及集成.產品數據表示和交換.一致性試驗的方法論和基本結構:一般概念 |
(Industrial automation systems and integration - Product data representation and exchange - Conformance testing methodology and framework: general concepts) |
| BS ISO 10303-32-1998 |
工業自動化系統和集成電路.產品數據表示和交換.一致性測試方法和結構:實驗室和試驗人員的要求 |
(Industrial automation systems and integration - Product data representation and exchange - Conformance testing methodology and framework: Requirements on testing laboratories and clients) |
| BS ISO 10303-41-1995 |
工業自動化系統和集成.產品數據表示和信息交流.集成總資源:產品描述和供應基礎 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resources - Fundamentals of product description and support) |
| BS ISO 10303-42-1995 |
工業自動化系統和集成.產品數據表示和信息交流.集成總資源:地理和拓撲表示法 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resources - Geometric and topological representation) |
| BS ISO 10303-43-1995 |
工業自動化系統和集成.產品數據表示和信息交流.集成總資源:結構表示法 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resources: Representation structures) |
| BS ISO 10303-44-1995 |
工業自動化系統和集成.產品數據表示和信息交流.集成總資源:產品結構配置 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resources: Product structure configuration) |
| BS ISO 10303-45-1999 |
工業自動化系統和集成.產品數據表示和交換.第45部分:集成設備:材料 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resource: Materials) |
| BS ISO 10303-46-1995 |
工業自動化系統和集成.產品數據表示和信息交流.集成總資源:視頻表示法 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resources: visual presentation) |
| BS ISO 10303-47-1998 |
工業自動化系統和集成.產品數據表示和交換.第47部分:集成設備:形狀變化公差 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resource - Shape variation tolerances) |
| BS ISO 10303-49-1998 |
工業自動化系統和集成電路.產品數據表示和交換.集成電路總資源:工藝結構和特性 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resources: Process structure and properties) |
| BS ISO 10312-1995 |
環境空氣.石棉纖維的測定.直接傳遞透射電子顯微法 |
Ambient air - Determination of asbestos fibres - Direct-transfer transmission electron microscopy method |
| BS ISO 10326-2-2001 |
機械振動.車輛座位振動評價的實驗室方法.鐵路車輛的應用 |
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Application to railway vehicles |
| BS ISO 10328-1-1997 |
修復術.假腿修復的結構檢驗.試驗配置 |
Prosthetics.Structural testing of lower-limb prostheses - Test configurations |
| BS ISO 10328-2-1997 |
修復術.假腿修復的結構檢驗.試驗樣品 |
Prosthetics.Structural testing of lower-limb prostheses - Test samples |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com