標準號 |
中文名稱 |
英文名稱 |
| BS EN 12697-23-2003 |
瀝青混合物.熱混瀝青用試驗方法.瀝青樣品的間接拉伸強度的測定 |
(Bituminous mixtures - Test methods for hot mix asphalt - Determination of the indirect tensile strength of bituminous specimens) |
| BS EN 12697-24-2004 |
瀝青混合料.熱混瀝青的試驗方法.抗疲勞性 |
|
| BS EN 12697-26-2004 |
瀝青混合料.熱混瀝青的試驗方法.硬度 |
|
| BS EN 12697-27-2001 |
瀝青混合料.熱混瀝青的試驗方法.取樣 |
(Bituminous mixtures - Test methods for hot mix asphalt - Sampling) |
| BS EN 12697-28-2001 |
瀝青混合料.熱混瀝青的試驗方法.測定粘結劑含量,水含量,和等級的樣品的準備 |
(Bituminous mixtures - Test methods for hot mix asphalt - Preparation of samples for determining binder content, water content and grading) |
| BS EN 12697-29-2002 |
瀝青混合料.熱混瀝青的試驗方法.測定瀝青取樣尺寸 |
(Bituminous mixtures - Test methods for hot mix asphalt - Determination of the dimensions of a bituminous specimen) |
| BS EN 12697-3-2000 |
瀝青混合料.熱混瀝青的試驗方法.瀝青回縮:旋轉式蒸發器 |
(Bituminous mixtures - Test methods for hot mix asphalt - Bitumen recovery: Rotary evaporator) |
| BS EN 12697-3-2005 |
瀝青混合料.熱混瀝青的試驗方法.瀝青回收.旋轉式蒸發器 |
|
| BS EN 12697-30-2004 |
瀝青混合料.熱混瀝青混合料的試驗方法.沖擊壓實機的樣品制備 |
|
| BS EN 12697-31-2004 |
瀝青混合料.熱混瀝青的試驗方法.用旋轉式壓實機制備樣品 |
|
| BS EN 12697-32-2003 |
瀝青混合料.熱拌瀝青混合料的試驗方法.用振動壓實機對瀝青混合料進行試驗室壓實 |
(Bituminous mixtures - Test methods for hot mix asphalt - Laboratory compaction of bituminous mixtures by vibratory compactor) |
| BS EN 12697-33-2004 |
瀝青混合料.熱混瀝青的試驗方法.由碾壓機制備的樣品 |
|
| BS EN 12697-34-2004 |
瀝青混合料.熱混瀝青混合料的試驗方法.馬歇爾試驗 |
|
| BS EN 12697-35-2004 |
瀝青混合料.熱混瀝青的試驗方法.實驗室混合 |
|
| BS EN 12697-36-2003 |
瀝青混合料.熱拌瀝青混合料的試驗方法.瀝青路面厚度的測定 |
(Bituminous mixtures - Test methods for hot mix asphalt - Determination of the thickness of a bituminous pavement) |
| BS EN 12697-37-2003 |
瀝青混合料.熱拌瀝青混合料的試驗方法.HRA用預涂瀝青碎石上粘合劑粘性的熱砂試驗 |
(Bituminous mixtures - Test methods for hot mix asphalt - Hot sand test for the adhesivity of binder on precoated chippings for HRA) |
| BS EN 12697-38-2004 |
瀝青混合料.熱混瀝青的試驗方法.通用設備和校準 |
|
| BS EN 12697-39-2004 |
瀝青混合料.熱混瀝青的試驗方法.燃燒法測定粘合劑含量 |
|
| BS EN 12697-4-2000 |
瀝青混合料.熱混瀝青的試驗方法.瀝青回縮:分餾柱 |
(Bituminous mixtures - Test methods for hot mix asphalt - Bitumen recovery: Fractionating column) |
| BS EN 12697-4-2005 |
瀝青混合料.熱混瀝青的試驗方法.瀝青回收.分餾柱 |
|
| BS EN 12697-43-2005 |
瀝青混合物.熱混合瀝青的試驗方法.抗燃料性 |
|
| BS EN 12697-5-2002 |
瀝青混合料.熱混合瀝青的試驗方法..測定最大密度 |
(Bituminous mixtures - Test methods for hot mix asphalt - Determination of the maximum density) |
| BS EN 12697-6-2003 |
瀝青混合料.熱拌瀝青混合料的試驗方法.瀝青試樣體密度的測定 |
(Bituminous mixtures - Test methods for hot mix asphalt - Determination of bulk density of bituminous specimens) |
| BS EN 12697-7-2002 |
瀝青混合料.熱混合瀝青的試驗方法.用γ-射線測定瀝青樣品的松密度 |
(Bituminous mixtures - Test methods for hot mix asphalt - Determination of the bulk density of bituminous specimens by gamma rays) |
| BS EN 12697-8-2003 |
瀝青混合料.熱拌瀝青混合料的試驗方法.瀝青試樣空隙特性的測定 |
(Bituminous mixtures - Test methods for hot mix asphalt - Determination of void characteristics of bituminous specimens) |
| BS EN 12697-9-2002 |
瀝青混合料.熱混瀝青的試驗方法.參考密度的測定 |
(Bituminous mixtures - Test methods for hot mix asphalt - Determination of the reference density) |
| BS EN 12699-2001 |
特殊地理工程的開挖.樁的代替 |
(Execution of special geotechnical work - Displacement piles) |
| BS EN 1270-1998 |
運動場設備.籃球設備.功能和安全要求、試驗方法 |
(Playing field equipment - Basketball equipment - Functional and safety requirements, test methods) |
| BS EN 12701-2001 |
結構膠粘劑.儲存.與結構膠粘劑和相關材料產品壽命有關的詞和詞組的測定 |
(Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials) |
| BS EN 12702-2000 |
包裝和一次性衛生用品用紙和紙板用膠粘劑.潛在膠粘層的阻塞的測定 |
(Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers) |
| BS EN 12703-1999 |
紙,紙板,包裝和一次性衛生產品用膠粘劑.低溫柔韌性和冷裂開溫度的測定 |
(Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature) |
| BS EN 12704-2000 |
紙,紙板,包裝和一次性衛生產品用膠粘劑.含水膠粘劑泡沫形成的測定 |
(Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives) |
| BS EN 12705-2000 |
皮革和鞋靴材料膠粘劑.用遷移法對白色或淺色皮革表面顏色變化的測定 |
(Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration) |
| BS EN 12706-2000 |
膠粘劑.液態的使地板平滑和/或平整的化合物的試驗方法.流動特性的測定 |
(Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determinatiion of flow characteristics) |
| BS EN 12707-2000 |
塑料圓筒.額定容量為210升,220升和225升的非移動頭式(密封蓋)圓筒 |
(Plastic drums - Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l) |
| BS EN 12708-2000 |
公稱容量為20升至225升的塑料容器用塞/蓋封閉系統 |
(Plug/bung closure systems for plastics containers with a nominal capacity of 20 l to 225 l) |
| BS EN 12709-2000 |
塑料柱桶.額定容量為20L至120L的有環形交叉的不可移動桶蓋(密封蓋)的柱桶 |
(Plastic drums - Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l) |
| BS EN 1271-1998 |
運動場設備.排球設備.功能和安全要求、試驗方法 |
(Playing field equipment - Volleyball equipment - Functional and safety requirement, test methods) |
| BS EN 1271-2004 |
運動場設備.排球設備.功能和安全要求及試驗方法 |
|
| BS EN 12710-2000 |
纖維板柱桶.額定容量為15升至250升的帶封閉環的可移動頭(開放頭)式柱桶 |
(Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l) |
| BS EN 12711-2000 |
鋼柱桶.最小總?cè)萘繛?30L的不可移動桶蓋(密封蓋)的柱桶 |
(Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 230 l) |
| BS EN 12712-2000 |
塑料油桶.托板尺寸為800mmX1200mm,1000mmX1200mm,1140mmX1140mm的最優利用的公稱容量為20升至60升的油桶 |
(Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm) |
| BS EN 12713-2000 |
公稱容量為20升至60升的塑料容器的螺紋帽封閉系統 |
(Screw cap closure systems for plastics containers with a nominal capacity of 20 L to 60 L) |
| BS EN 12714-2000 |
塑料柱桶.公稱容量為25升至220升的可拆卸頭(開放式頭)的柱桶 |
(Plastics drums - Removable head (open head) drums with a nominal capacity of 25 L to 220 L) |
| BS EN 12715-2000 |
特殊土工工程的處理.灌漿 |
(Execution of special geotechnical work - Grouting) |
| BS EN 12716-2001 |
特殊土工工作的執行.噴射灌漿 |
(Execution of special geotechnical works - Jet grouting) |
| BS EN 12717-2001 |
機床的安全.鉆床 |
(Safety of machine tools - Drilling machines) |
| BS EN 1272-1998 |
兒童護理產品.裝有椅子的桌子.安全要求和試驗方法 |
(Child care articles - Table mounted chairs - Safety requirements and test methods) |
| BS EN 12720-1997 |
家具.冷液表面抗性的評估 |
(Furniture - Assessment of surface resistance to cold liquids) |
| BS EN 12721-1997 |
家具.濕熱表面抗性的評估 |
(Furniture - Assessment of surface resistance to wet heat) |
| BS EN 12722-1997 |
家具.干熱表面抗性的評估 |
(Furniture - Assessment of surface resistance to dry heat) |
| BS EN 12723-2000 |
液泵.泵和設備的通用術語.定義、參數、字母符號和單位 |
(Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units) |
| BS EN 12726-2000 |
包裝.軟木塞和錐度明顯的瓶塞用口徑為18.5mm的塞軟木塞的瓶口 |
(Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules) |
| BS EN 12727-2000 |
家具.成排座椅.強度和耐久性的試驗方法和要求 |
(Furniture - Ranked seating - Test methods and requirements for strength and durability) |
| BS EN 12728-2000 |
表面活性劑.發泡能力的測定.多孔圓盤敲擊法 |
(Surface active agents - Determination of foaming power - Perforated disc beating method) |
| BS EN 12729-2003 |
防飲用水回流污染設備.帶減壓區的可控制回流防止器.B系列A型 |
(Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B. Type A) |
| BS EN 1273-2001 |
嬰兒護理用品.嬰兒學步車.安全要求和試驗方法 |
(Child care articles - Baby walking frames - Safety requirements and test methods) |
| BS EN 12730-2001 |
防水柔性板.屋頂防水用瀝青,塑料和橡膠板.耐靜態負載的測定 |
(Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to static loading) |
| BS EN 12732-2000 |
供氣系統.焊接鋼管.功能要求 |
(Gas supply systems - Welding steel pipework - Functional requirements) |
| BS EN 12733-2001 |
農業和林業機械.非專業人員操縱的動力割草機.安全 |
(Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety) |
| BS EN 12734-2000 |
灌溉技術.可移動灌溉設備用快速連接管.技術特性和試驗 |
(Irrigation techniques - Quick coupling pipes for movable irrigation supply - Technical characteristics and testing) |
| BS EN 12735-1-2001 |
銅和銅合金.空氣調節和制冷用無縫圓形銅管.管道系統用管 |
(Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Tubes for piping systems) |
| BS EN 12735-2-2001 |
銅和銅合金.空氣調節和制冷用無縫圓形銅管.設備用管 |
(Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Tubes for equipment) |
| BS EN 12736-2002 |
電力推動道路車輛.用運載工具車上充電器充電過程中車輛的空中傳播噪聲的聲功率水平測定 |
(Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level) |
| BS EN 12738-1999 |
生物技術.研究、開發和分析實驗室.實驗中接種動物遏制微生物的測定指南 |
(Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments) |
| BS EN 1274-1997 |
熱噴射.粉末.成分.交貨技術條件 |
(Thermal spraying - Powders - Composition - Technical supply conditions) |
| BS EN 12740-1999 |
生物技術.研究、開發和分析實驗室.廢棄物的運輸、減除活性和試驗指南 |
(Biotechnology - Laboratories for research, development and analysis - Guidance for handling, inactivating and testing of waste) |
| BS EN 12741-1999 |
生物技術.研究、開發和分析實驗室.生物技術實驗室工作指南 |
(Biotechnology - Laboratories for research, development and analysis - Guidance for biotechnology laboratory operations) |
| BS EN 12742-1999 |
水果和蔬菜汁.自由氨基酸含量的測定.液相色譜法 |
(Fruit and vegetable juices - Determination of free amino acids content - Liquid chromatographic method) |
| BS EN 12743-1999 |
鞋靴.外鞋底的試驗方法.壓縮能量 |
(Footwear - Test methods for outsoles - Compression energy) |
| BS EN 12744-1999 |
鞋靴.鞋墊的試驗方法.耐層離性 |
(Footwear - Test methods for insoles - Delamination resistance) |
| BS EN 12745-1999 |
鞋靴.鞋墊的試驗方法.釘夾持強度 |
(Footwear - Test methods for insoles - Pin holding strength) |
| BS EN 12746-2000 |
鞋靴.鞋墊和鞋內層的試驗方法.水的吸收和退吸 |
(Footwear - Test methods for insoles and insocks - Water absorption and desorption) |
| BS EN 12747-1999 |
鞋靴.鞋墊的試驗方法.耐磨損性 |
(Footwear - Test methods for insoles - Abrasion resistance) |
| BS EN 12748-1999 |
鞋靴.外鞋底,鞋墊,襯里和鞋內襯墊的試驗方法.水溶含量 |
(Footwear - Test methods for outsoles, insoles, linings and insocks - Water soluble content) |
| BS EN 12749-1999 |
鞋靴.老化調濕 |
(Footwear - Ageing conditioning) |
| BS EN 1275-1997 |
化學消毒劑和防腐劑.殺霉菌基本作用.檢驗方法和要求(第1階段) |
(Chemical disinfectants and antiseptics - Basic fungicidal activity - Test method and requirements (phase 1)) |
| BS EN 12750-2001 |
木工機械的安全.四邊鑄模機 |
(Safety of woodworking machines - Four-sided moulding machines) |
| BS EN 12751-1999 |
紡織品.試驗用纖維、紗和織物的取樣 |
(Textiles - Sampling of fibres, yarns and fabrics for testing) |
| BS EN 12752-1-1999 |
額定熱輸入不超過20千瓦的燃?xì)釨型滾筒干衣機.安全 |
(Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW - Safety) |
| BS EN 12752-2-1999 |
額定熱輸入不超過20千瓦的燃?xì)釨型滾筒干衣機.能量的合理使用 |
(Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW - Rational use of energy) |
| BS EN 12753-2005 |
表面處理設備廢氣的熱清潔系統.安全要求 |
|
| BS EN 12754-2002 |
可運輸?shù)臍馄?溶解乙炔用氣瓶.填充時的檢查 |
(Transportable gas cylinders - Cylinders for dissolved acetylene - Inspection at time of filling) |
| BS EN 12755-2000 |
可移動式氣體鋼瓶.乙炔填充條件 |
(Transportable gas cylinders - Filling conditions for acetylene bundles) |
| BS EN 12756-2001 |
機械密封件.主要尺寸,標識和材料代碼 |
(Mechanical seals - Principal dimensions, designation and material codes) |
| BS EN 12758-2002 |
建筑物用玻璃.玻璃和空氣聲隔絕.產品描述和性能測定 |
(Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties) |
| BS EN 12759-2001 |
橡膠或塑料涂層織物.耐液體性能的測定 |
(Rubber- or plastic-coated fabrics - Determination of resistance to liquids) |
| BS EN 1276-1997 |
化學消毒劑和防腐劑.用在食品,工業,家用,和公共區域的化學消毒劑和防腐劑的微生物活性評估的定性懸浮實驗. |
() |
| BS EN 12760-1999 |
閥門.鋼閥門的套節焊接末端 |
(Valves - Socket welding ends for steel valves) |
| BS EN 12761-1-2001 |
農林機械.噴霧器和液體肥料噴施器.環境保護.一般 |
(Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors - Environmental protection - General) |
| BS EN 12761-2-2001 |
農林機械.噴霧器和液體肥料噴施器.環境保護.大田作物噴施器 |
(Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors - Environmental protection - Field crop sprayers) |
| BS EN 12761-3-2001 |
農林機械.噴霧器和液體肥料噴施器.環境保護.灌木和樹狀作物用空氣輔助噴施器 |
(Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors - Environmental protection - Air-assisted sprayers for bush and tree crops) |
| BS EN 12763-2000 |
建筑物排放系統用纖維混凝土管道和配件.交貨的尺寸和技術條款 |
(Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery) |
| BS EN 12765-2001 |
非結構用熱固性木基膠粘劑的分類 |
(Classification of thermosetting wood adhesives for non-structural applications) |
| BS EN 12766-1-2000 |
石油及其制品的試驗方法.石油產品和用過的油.PCBs相關產品的測定.通過有電子俘獲探測器的氣相色譜法分離和 |
(Methods of test for petroleum and its products - Petroleum products and used oils - Determination of PCBs and related products - Separation and determination of selected PCB congeners by gas chromatog) |
| BS EN 12766-2-2001 |
石油及其產品的試驗方法.石油產品和用過的油.多氯聯苯和相關產品的測定.多氯聯苯(PCB)含量的計算 |
(Methods of test for petroleum and its products - Petroleum products and used oils - Determination of PCBs and related products - Calculation of polychlorinated biphenyl (PCB) content) |
| BS EN 12766-3-2004 |
石油及其制品的試驗方法.石油產品和用過的油.PCB和相關產品的測定.使用電子俘獲探測器的氣相色譜法測定和量化多氯三聯苯(PCT)和多氯苯基甲苯(PCBT)含量 |
|
| BS EN 12767-2000 |
道路設備支承結構的消極安全.要求和試驗方法 |
(Passive safety of support structures for road equipment - Requirements and test methods) |
| BS EN 1277-1996 |
塑料管道系統.地下無壓用熱塑管道系統.彈性密封環型接頭密封性的試驗方法 |
(Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints) |
| BS EN 1277-2004 |
塑料管道系統.地下無壓用熱塑性管道系統.彈性密封環型接頭密封性的試驗方法 |
|
| BS EN 12770-2000 |
鞋靴.外鞋底的試驗方法.耐磨損性 |
(Footwear - Test methods for outsoles - Abrasion resistance) |
| BS EN 12771-2000 |
鞋靴.外底的試驗方法.抗扯裂強度 |
(Footwear - Test methods for outsoles - Tear strength) |
| BS EN 12772-2000 |
鞋靴.外底的試驗方法.尺寸穩定性 |
(Footwear - Test methods for outsoles - Dimensional stability) |
| BS EN 12773-2000 |
鞋靴.外底的試驗方法.針刺破強度 |
(Footwear - Test methods for outsoles - Needle tear strength) |
| BS EN 12774-2000 |
鞋靴.外底的試驗方法.剝層撕裂強度和剝離阻力的測定 |
(Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance) |
| BS EN 12775-2001 |
固體木制板材.分類和術語 |
(Solid wood panels - Classification and terminology) |
| BS EN 12778-2002 |
烹飪器具.家用壓力烹飪器 |
(Cookware - Pressure cookers for domestic use) |
| BS EN 1278-1999 |
用于人用水處理的化學藥劑.臭氧 |
(Chemicals used for treatment of water intended for human consumption - Ozone) |
| BS EN 12780-2002 |
水質.用薄膜過濾法對綠膿桿菌的檢測和計算. |
(Water quality - Detection and enumeration of Pseudomonas aeruginosa by membrane filtration) |
| BS EN 12781-2001 |
墻面飾層.軟木板的規范 |
(Wallcoverings - Specification for cork panels) |
| BS EN 12782-2000 |
鞋靴.外底的試驗方法.線縫抗撕裂強度 |
(Footwear - Test methods for insoles - Resistance to stitch tear) |
| BS EN 12784-2000 |
鞋靴.整鞋的試驗方法.隔熱 |
(Footwear - Test methods for the whole shoe - Thermal insulation) |
| BS EN 12785-2000 |
鞋靴.整個鞋的試驗方法.鞋跟的固定 |
(Footwear - Test methods for whole shoe - Heel attachment) |
| BS EN 12786-1999 |
機械安全.安全標準中振動條款的起草指南 |
(Safety of machinery - Guidance for the drafting of vibration clauses of safety standards) |
| BS EN 12789-2003 |
高級工業陶瓷.在大氣壓力下高溫時陶瓷復合物的機械特性.撓曲強度的測定 |
(Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength) |
| BS EN 1279-1-2004 |
建筑物用玻璃.絕緣玻璃部件.系統描述的概要、尺寸公差和規則 |
|
| BS EN 1279-1-2004 |
建筑物用玻璃.絕緣玻璃部件.系統描述的概要、尺寸公差和規則 |
|
| BS EN 1279-2-2003 |
建筑玻璃.隔熱玻璃組件.長期試驗法和透濕性要求 |
(Glass in building - Insulating glass units - Long term test method and requirements for moisture penetration) |
| BS EN 1279-3-2003 |
建筑玻璃.絕緣玻璃組件.長期試驗法以及漏氣率和氣體濃度公差要求 |
(Glass in building - Insulating glass units - Long term test method and requirements for gas leakage rate and for gas concentration tolerances) |
| BS EN 1279-4-2002 |
建筑物用玻璃.隔熱玻璃組件.封邊密封件的物理特性的試驗方法 |
(Glass in building - Insulating glass units - Methods of test for the physical attributes of edge seals) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com