標準號 |
中文名稱 |
英文名稱 |
| BS 879-2-1988 |
水井套管.第2部分:井套管和開縫井套管用熱塑管規范 |
(Water well casing - Specification for thermoplastics tubes for casing and slotted casing) |
| BS 88-2.2-1988 |
低壓熔斷器.第2部分:專職人員使用的熔斷器(主要是工業用熔斷器)的補充要求.第1節:專職人員使用的標準熔斷器 |
(Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification for fuses for use by authorized persons (mainly for industrial application) - Additional requirements for fus) |
| BS 88-4-1988 |
電壓達交流1000V(含)和直流1500V(含)的管狀熔斷器.第4部分:保護半導體器件用熔斷體的補充要求規范 |
(Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification of supplementary requirements for fuse-links for the protection of semiconductor devices) |
| BS 88-5-1988 |
電壓達交流1000V(含)和直流1500V(含)的管狀熔斷器.第5部分:交流供電網用熔斷體的補充要求規范 |
(Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification of supplementary requirements for fuse-links for use in a.c. electricity supply networks) |
| BS 88-6-1988 |
電壓達交流1000V(含)和直流1500V(含)的管狀熔斷器.第6部分:交流 240/415V工業和商業電氣設備用的小尺寸熔斷 |
(Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification of supplementary requirements for fuses of compact dimensions for use in 240/415 V a.c. industrial and commer) |
| BS 8800-1996 |
職業健康和安全管理系統導則 |
(Guide to occupational health and safety management systems) |
| BS 8800-2004 |
職業健康和安全管理系統.指南 |
|
| BS 8855-2-2000 |
土壤分析.煤焦油衍生酚類化合物測定的方法 |
(Soil analysis - Method for determination of coal tar-derived phenolic compounds) |
| BS 887-1982 |
精密游標卡尺規范 |
(Specification for precision vernier callipers) |
| BS 8888-2002 |
技術產品文獻(TPD).定義、詳細說明和圖形表示產品的規范 |
(Technical product documentation (TPD) - Specification for defining, specifying and graphically representing products) |
| BS 8888-2004 |
技術產品規范 |
|
| BS 89-2-1990 |
直接指示模擬電學測量儀表及其輔助設備.第2部分:電流表及電壓表的特殊要求規范 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for ammeters and voltmeters) |
| BS 89-3-1990 |
直接指示模擬電學測量儀表及其輔助設備.第3部分:瓦特表和無功功率表的特殊要求規范 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for wattmeters and varmeters) |
| BS 89-4-1990 |
直接指示模擬電測量儀表及其附件.頻率表的特殊要求規范 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for frequency meters) |
| BS 89-5-1990 |
直接指示模擬電學測量儀表及其輔助設備.第5部分:相位表、功率因數表和同步指示器的特殊要求規范 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for phase meters, power factor meters and synchroscopes) |
| BS 89-6-1990 |
直接指示模擬電學測量儀表及其輔助設備.第6部分:歐姆表(阻抗表)和電導率計的特殊要求規范 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for ohmmeters (impedance meters) and conductance meters) |
| BS 89-7-1990 |
直接指示模擬電學測量儀表及其輔助設備.第7部分:多功能儀表的特殊要求規范 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for multi-function instruments) |
| BS 89-8-1990 |
直接指示模擬電學測量儀表及其輔助設備.第8部分:輔助設備的特殊要求規范 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for accessories) |
| BS 89-9-1990 |
直接指示模擬電學測量儀表及其輔助設備.第9部分:推薦的試驗方法 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Recommended test methods) |
| BS 893-1978 |
導管輸送氣體中粒狀物質濃度的測量方法 |
(Method for the measurement of the concentration of particulate material in ducts carrying gases) |
| BS 894-1956 |
烏伯婁德流動點和滴點測定裝置規范 |
(Specification for Ubbelohde apparatus for flow and drop points) |
| BS 896-1-1960 |
擔架及擔架支座規范.第1部分:尺寸 |
(Specification for stretchers and stretcher carriers - Dimensions) |
| BS 896-2-1965 |
擔架及擔架支座規范.第2部分:性能 |
(Specification for stretchers and stretcher carriers - Performance) |
| BS 8F 35-2002 |
航天航空用編織亞麻花邊線繩 |
(Braided linen (flax) lacing cord for aerospace purposes) |
| BS 90-1975 |
直接作用的電記錄儀表及附件規范 |
(Specification for direct-acting electrical recording instruments and their accessories) |
| BS 9000-1-1989 |
電子器件質量評定體系的一般要求.通用程序規范 |
(General requirements for a system for electronic components of assessed quality - Specification of general procedures) |
| BS 9000-2-1996 |
經質量評定的電子件系統的一般要求.第2部分:CECC國內采用規范 |
(General requirements for a system for electronic components of assessed quality - Specification for the national implementation of the CECC system) |
| BS 9000-3-1996 |
具有質量評定的電子件體系的一般要求.第3部分:IECQ體系國家執行程序規范 |
(General requirements for a system for electronic components of assessed quality - Specification for the national implementation of the IECQ system) |
| BS 9000-4-1991 |
經質量評定的電子件體系的一般要求.第4部分:一個組織的審定程序規范 |
(General requirements for a system for electronic components of assessed quality - Specification of procedures for the approval of an organization) |
| BS 9000-5-1989 |
電子器件質量評定體系的一般要求.資格鑒定和一致性試驗程序規范 |
(General requirements for a system for electronic components of assessed quality - Specification of qualification approval and conformance testing procedures) |
| BS 9000-6-1989 |
電子器件質量評定體系的一般要求.能力鑒定程序規范 |
(General requirements for a system for electronic components of assessed quality - Specification of capability approval procedures) |
| BS 9000-7-1989 |
電子器件質量評定體系的一般要求.批量生產、交付步驟和認證試驗記錄規范 |
(General requirements for a system for electronic components of assessed quality - Specification of lot formation, release procedures and certified test records) |
| BS 903-0-2003 |
橡膠的物理試驗.總則 |
(Physical testing of rubber - General) |
| BS 903-1-1995 |
橡膠的物理試驗.第0部分:橡膠用試驗方法的選擇和使用指南 |
(Physical testing of rubber - Guide to the selection and use of methods of test for rubber) |
| BS 903-2-1997 |
橡膠的物理試驗.橡膠試驗統計應用導則 |
(Physical testing of rubber - Guide to the application of statistics to rubber testing) |
| BS 903-3-2003 |
橡膠的物理試驗.可比單點數據的捕獲和表示 |
(Physical testing of rubber - Acquisition and presentation of comparable single-point data) |
| BS 903-4-2003 |
橡膠的物理試驗.可比多點數據的捕獲和表示 |
(Physical testing of rubber - Acquisition and presentation of comparable multi-point data) |
| BS 903-5-2004 |
橡膠的物理試驗.有限素分析的橡膠試驗的應用指南 |
|
| BS 903-A1-1996 |
橡膠物理試驗.密度測定 |
(Physical testing of rubber - Determination of density) |
| BS 903-A13-1990 |
橡膠的物理試驗.第A13部分:低溫勁度的測定方法(杰曼試驗) |
(Physical testing of rubber - Method for determination of stiffness at low temperature (Gehman test)) |
| BS 903-A14-1992 |
橡膠的物理試驗.第A14部分:剪切模量或剛性板粘著力的測定方法.四重剪切法 |
(Physical testing of rubber - Method for determination of modulus in shear or adhesion to rigid plates - Quadruple shear method) |
| BS 903-A15-1990 |
橡膠的物理試驗.第A15部分:壓縮或剪切蠕變的測定方法 |
(Physical testing of rubber - Method for determination of creep in compression or shear) |
| BS 903-A18-1973 |
橡膠的物理試驗.第A18部分:平衡水蒸汽吸收的測定 |
(Physical testing of rubber - Determination of equilibrium water vapour absorption) |
| BS 903-A2-1995 |
橡膠的物理試驗.拉伸應力-應變特性的測定 |
(Physical testing of rubber - Method for determination of tensile stress-strain properties) |
| BS 903-A21.1-1997 |
橡膠的物理試驗.橡膠對金屬粘接強度的測定.對硬物質的粘接.90度剝離方法 |
(Physical testing of rubber - Determination of rubber to metal bond strength - Adhesion to rigid substrates - 90 ?peel method) |
| BS 903-A21.2-1997 |
橡膠物理試驗.橡膠對金屬粘接強度的測定.對硬物質的粘接.兩平板方法 |
(Physical testing of rubber - Determination of rubber to metal bond strength - Two plate method) |
| BS 903-A25-1992 |
橡膠的物理試驗.第A25部分:低溫脆性測定 |
(Physical testing of rubber - Determination of low-temperature brittleness) |
| BS 903-A26-1995 |
橡膠的物理試驗.硬度的測定(10 IRHD-100 IRHD)方法 |
(Physical testing of rubber - Method for determination of hardness (hardness between 10 IRHD and 100 IRHD)) |
| BS 903-A27-1986 |
橡膠的物理試驗.第A27部分:橡膠對織物附著力的測定(直接拉力法) |
(Physical testing of rubber - Determination of rubber to fabric adhesion: direct tension method) |
| BS 903-A29-1997 |
橡膠的物理試驗.低溫收縮過程.低溫特性的測定 |
(Physical testing of rubber - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)) |
| BS 903-A3-1995 |
橡膠的物理試驗.抗撕裂強度的測定方法(褲形,角形和新月狀試片) |
(Physical testing of rubber - Method for determination of tear strength (trouser, angle and crescent test pieces)) |
| BS 903-A3.2-1997 |
橡膠物理試驗.撕裂強度的測定.小型試驗片 |
(Physical testing of rubber - Determination of tear strength - Small (Delft) test pieces) |
| BS 903-A30-1996 |
橡膠的物理試驗.第A30部分:橡膠透氣性的測定(恒壓法) |
(Physical testing of rubber - Determination of permeability to gases) |
| BS 903-A31-1976 |
橡膠的物理試驗.第A31部分:用扭力擺測定橡膠的低頻動態性能 |
(Physical testing of rubber - Determination of the low-frequency dynamic properties of rubbers by means of a torsion pendulum) |
| BS 903-A32-1988 |
硫化橡膠的試驗方法.第A32部分:達到高于或低于正常試驗溫度方法的一般說明 |
(Physical testing of rubber - General directions for achieving elevated or subnormal temperatures for test purposes) |
| BS 903-A35-1995 |
橡膠的物理試驗.第A35部分:試樣試驗的溫度、濕度和時間條件 |
(Physical testing of rubber - Temperatures, humidities and times for conditioning and testing of test pieces) |
| BS 903-A36-1995 |
橡膠的物理試驗.第A36部分:試樣和試件的制備方法 |
(Physical testing of rubber - Method for preparation of samples and test pieces) |
| BS 903-A37-1997 |
橡膠的物理試驗.對金屬的附著力和金屬腐蝕的測定 |
(Physical testing of rubber - Determination of tendency to adhere to and to corrode metals) |
| BS 903-A38-1991 |
橡膠的物理實驗.第A38部分:試驗用試件和制品尺寸的測定方法 |
(Physical testing of rubber - Methods for the determination of dimensions of test pieces and products for test purposes) |
| BS 903-A4-1990 |
橡膠的物理試驗.第A4部分:壓縮應力-應變特性的測定 |
(Physical testing of rubber - Determination of compression stress-strain properties) |
| BS 903-A40-1988 |
橡膠的物理試驗.第A40部分:錐形零件對剛性材料附著力的測量 |
(Physical testing of rubber - Determination of adhesion to rigid materials using conical shaped parts) |
| BS 903-A43-1990 |
橡膠的物理試驗.第A43部分:抗臭氧龜裂性的測定(靜態應變試驗) |
(Physical testing of rubber - Method for determination of resistance to ozone cracking (static strain test)) |
| BS 903-A44-1995 |
橡膠的物理試驗.抗臭氧龜裂性的測定方法(動態應變試驗) |
(Physical testing of rubber - Method of determination of resistance to ozone cracking (dynamic strain test)) |
| BS 903-A48-1984 |
橡膠的物理試驗.第A48部分:對簾線靜態附著力的測定(H抽出試驗法) |
(Methods of testing vulcanized rubber - Determination of static adhesion to textile cord (H-pull test)) |
| BS 903-A49-1984 |
橡膠的物理試驗.第A49部分:撓曲計試驗中溫升和耐疲勞性的測定(基本原理) |
(Physical testing of rubber - Determination of temperature rise and resistance to fatigue in flexometer testing (basic principles)) |
| BS 903-A50-1984 |
橡膠的物理試驗.第A50部分:撓曲計試驗中溫升和耐疲勞性的測定(壓縮撓曲計) |
(Methods of testing vulcanized rubber - Determination of temperature rise and resistance to fatigue in flexometer testing (compression flexometer)) |
| BS 903-A51-1986 |
橡膠的物理試驗.第A51部分:耐拉伸疲勞性的測定 |
(Methods of testing vulcanized rubber - Determination of resistance to tension fatigue) |
| BS 903-A52-1986 |
橡膠的物理試驗.第A52部分:在給定延伸率情況下,用應力測量法測定老化特性 |
(Physical testing of rubber - Determination of ageing characteristics by measurement of stress at a given elongation) |
| BS 903-A56-1989 |
橡膠的物理試驗.第A56部分:對金屬繩的附著力的測定 |
(Physical testing of rubber - Determination of adhesion to wire cord) |
| BS 903-A57-1997 |
橡膠的物理試驗.用袖珍硬度計測定壓痕硬度 |
(Physical testing of rubber - Determination of indentation hardness by means of pocket hardness meters) |
| BS 903-A58.1-2001 |
橡膠的物理試驗.穆尼粘度計法.非染色的、油展的、乳膠聚合的丁苯橡膠(SBR)δ穆尼值的測定 |
(Physical testing of rubber - Methods using the Mooney viscometer - Determination of the Delta Mooney value for non-pigmented, oil-extended, emulsion-polymerized SBR) |
| BS 903-A59.1-1997 |
橡膠物理試驗.用塑度計方法.快速塑化值的測定 |
(Physical testing of rubber - Methods using plastimeters - Determination of the rapid plasticity number) |
| BS 903-A59.2-1997 |
橡膠物理試驗.用塑度計方法.生天然橡膠塑化延遲指數(PRI)的測定 |
(Physical testing of rubber - Methods using plastimeters - Determination of the plasticity retention index (PRI) of raw natural rubber) |
| BS 903-A6-1992 |
橡膠的物理試驗.第A6部分:室溫、高溫和低溫下壓縮變形的測定方法 |
(Physical testing of rubber - Method for determination of compression set at ambient, elevated or low temperatures) |
| BS 903-A60.1-2000 |
橡膠物理試驗.硫化計.硫化計使用指南 |
(Physical testing of rubber - Curemetering - Guide to the use of curemeters) |
| BS 903-A60.2-1992 |
橡膠物理試驗.硫化計.用振動園盤硫化計對硫化特性的測定方法 |
(Physical testing of rubber - Curemetering - Method for the determination of vulcanization characteristics using an oscillating disc curemeter) |
| BS 903-A62-1993 |
橡膠的物理試驗.未硫化化合物生橡膠的濕態強度測定方法 |
(Physical testing of rubber - Method for determination of green strength of raw rubber of unvulcanized compounds) |
| BS 903-A63-1995 |
橡膠的物理試驗.硬度測量結晶效應的測定方法 |
(Physical testing of rubber - Method for determination of crystallization effects by hardness measurements) |
| BS 903-A64-1995 |
橡膠的物理試驗.第A64部分:橡膠試驗混合料的制備、混合和硫化方法 |
(Physical testing of rubber - Method for the preparation, mixing and vulcanization of rubber test mixes) |
| BS 903-A8-1990 |
橡膠的物理試驗.第A8部分:彈性的測定方法 |
(Physical testing of rubber - Method for determination of rebound resilience) |
| BS 903-C1-1991 |
橡膠的物理試驗.表面電阻系數的測定 |
(Physical testing of rubber - Determination of surface resistivity) |
| BS 903-C2-1982 |
橡膠的物理試驗.體積電阻系數的測定 |
(Physical testing of rubber - Determination of volume resistivity) |
| BS 903-C5-1992 |
橡膠的物理試驗.第C5部分:絕緣電阻的測定.塑料的試驗方法.電氣性質.絕緣電阻的測定 |
(Physical testing of rubber - Determination of insulation resistance) |
| BS 9031-1971 |
經質量評定的固定頻率脈沖磁控管詳細規范的制定規則 |
(Rules for the preparation of detail specifications for pulsed fixed-frequency magnetrons of assessed quality) |
| BS 9032-1975 |
經質量評定的脈沖磁控管(不包括頻率捷變磁控管)詳細規范的制定規則.基本評定級 |
(Rules for the preparation of detail specifications for pulsed magnetrons (excluding frequency-agile magnetrons) of assessed quality - Basic assessment level) |
| BS 9040-1978 |
經質量評定的充氣微波開關管規范.通用數據和試驗方法 |
(Specification for gas-filled microwave switching tubes of assessed quality: generic data and methods of test) |
| BS 9041-1978 |
經質量評定的充氣微波開關詳細規范的制定規則.可調和寬頻帶TR管與TR限幅器.全部評定級 |
(Rules for the preparation of detail specifications for gas filled microwave switching tubes of assessed quality: tunable and broadband TR tubes and TR limiters - Full assessment level) |
| BS 9054-1971 |
經質量評定的雷達顯示陰極射線管詳細規范的制定規則 |
(Rules for the preparation of detail specifications for radar display cathode ray tubes of assessed quality) |
| BS 906-1-1972 |
工程平行板規范.第1部分:米制單位 |
(Specification for engineers’ parallels - Metric units) |
| BS 906-2-1972 |
工程平行板規范.第2部分:英制單位 |
(Specification for engineers’ parallels - Imperial units) |
| BS 907-1965 |
線性測量用千分表規范 |
(Specification for dial gauges for linear measurement) |
| BS 9070 N002-1971 |
經質量評定的 C2AED型固定云母介質電容器詳細規范.單面中心引線矩形非金屬殼.一般應用范圍 |
(Detail specification for fixed metallized mica dielectric capacitors (style C2AED) - Rectangular non-metallic case, centred wires on one face - General application category) |
| BS 9070 N003-1971 |
經質量評定的 C2AEA型固定云母介質電容器詳細規范.兩端軸向引線矩形非金屬殼.一般應用范圍 |
(Detail specification for fixed metallized mica dielectric capacitors (style C2AEA) - Rectangular non-metallic case, axial wires at both ends - General application category) |
| BS 9070 Secs.1 and 2-1969 |
經過質量評估的固定式電容器的規范.一般數據和試驗方法.原則和強制規程.起草詳細規范的一般規則 |
(Specification for fixed capacitors of assessed quality: generic data and methods of test - Principles and mandatory procedures - General rules for drafting detail specifications) |
| BS 9070-3-1970 |
經質量評定的固定電容器規范.一般數據和試驗方法.第3節:鉭介質電容器 |
(Specification for fixed capacitors of assessed quality: generic data and methods of test - Tantalum electrolytic capacitors) |
| BS 9070-4-1971 |
經質量評定的固定電容器規范.一般數據和試驗方法.第4節:聚苯乙烯介質電容器 |
(Specification for fixed capacitors of assessed quality: generic data and methods of test - Polystyrene dielectric capacitors) |
| BS 9070-5-1971 |
經質量評定的固定電容器規范.一般數據和試驗方法.第5節:陶瓷介質電容器 |
(Specification for fixed capacitors of assessed quality: generic data and methods of test - Ceramic dielectric capacitors) |
| BS 9070-6-1971 |
經質量評定的固定電容器規范.一般數據和試驗方法.第6節:直流用聚碳酸酯介質電容器和聚乙烯對苯二甲酸酯介質 |
(Specification for fixed capacitors of assessed quality: generic data and methods of test - Polycarbonate dielectric capacitors and polyethylene terephthalate dielectric capacitors for d.c. use and pol) |
| BS 9070-7-1971 |
經質量評定的固定電容器規范.一般數據和試驗方法.云母介質電容器 |
(Specification for fixed capacitors of assessed quality: generic data and methods of test - Mica dielectric capacitors) |
| BS 9073 N0034-1978 |
固定鉭介質電容器詳細規范.極性非固體介質多孔陽極.軸向引線端接管狀絕緣金屬殼PTFE/彈性密封.全面的附加評 |
(Detail specification for fixed tantalum electrolytic capacitors - Porous anode, polar non-solid electrolyte - Tubular insulated metallic case, PTFE/elastomer seal, axial wire terminations - Full plus) |
| BS 9074 N002-1974 |
固定聚苯乙烯薄膜介質電容器詳細規范.軸向端接管狀絕緣殼.全面評定級 |
(Detail specification for fixed polystyrene foil dielectric capacitors - Tubular insulated case, axial terminations - Full asessment level) |
| BS 9074 N007-1981 |
聚苯乙烯薄膜介質擴展箔電容器詳細規范.單向端接矩形非金屬殼.全面附加評定級 |
(Detail specification for polystyrene film dielectric capacitors, extended foil - Rectangular non-metallic case, unidirectional terminations - Full plus additional assessment level) |
| BS 9075 N023-1978 |
固定單片陶瓷介質電容器(1B型)詳細規范.單面中心引線矩形非金屬殼.全面評定級 |
(Detail specification for fixed monolithic ceramic dielectric capacitors (type 1B) - Rectangular non-metallic case, centred wires on one face - Full assessment level) |
| BS 9075 N024-1978 |
固定單片陶瓷介質電容器(2C1型)詳細規范.單面中心引線矩形非金屬殼.全面評定級 |
(Detail specification for fixed monolithic ceramic dielectric capacitors (type 2C1) - Rectangular non-metallic case, centred wires on one face - Full assessment level) |
| BS 9076 N001 to 004-1974 |
固定金屬化聚乙烯對苯二甲酸乙二酯薄膜或金屬化聚碳酸酯薄膜介質電容器詳細規范.中間隔開軸向或輻射引線矩 |
(Detail specification for fixed metallized polyethylene terephthalate (PETP) film or metallized polycarbonate film dielectric capacitors - Rectangular non-metallic case axial or radial terminations, ce) |
| BS 9093-1979 |
微調可變電容器(C型)的詳細規范的制定規則.全面評定級 |
(Rules for the preparation of detail specifications for variable pre-set capacitors, type C (full assessment level)) |
| BS 91-1998 |
電纜焊接插座.規范 |
(Electric cable soldering sockets - Specification) |
| BS 9100-1983 |
定制的電容器和電容器模件的性能鑒定規范.通用數據和試驗方法 |
(Specification for capability approval for custom-built capacitors and capacitor modules: generic data and methods of test) |
| BS 9130-1972 |
經質量評定的電位器規范.通用數據和試驗方法 |
(Specification for potentiometers of assessed quality: generic data and methods of test) |
| BS 9131 N001 to 016-1974 |
導桿驅動線繞或非線繞預調電位器詳細規范.長方形和正方形、密封容器、驅動裝置與電阻件絕緣、在移動每端 |
(Detail specification for lead-screw actuated wirewound or non-wirewound preset potentiometers - Rectangular and square forms, container sealed, actuating device insulated from resistive element, slipp) |
| BS 9133 N001 to 003-1975 |
單旋非線繞小功率旋轉電位器詳細規范.軸與電阻件絕緣、軸和控制板封裝或有外殼、軸和控制板封裝.全面評定 |
(Detail specification for single turn low power non-wirewound rotary potentiometers - Spindle insulated from resistance element, spindle and panel sealed or container, spindle and panel sealed - Full a) |
| BS 9133-1973 |
經質量評定的單匝小功率旋轉電位器詳細規范的制定規則 |
(Rules for the preparation of detail specifications for single turn low power rotary potentiometers of assessed quality) |
| BS 9151-1972 |
經質量評定的“有“或“無“繼電器詳細規范的制訂規則.所有的和基本的評定級別 |
(Rules for the preparation of detail specifications for all-or-nothing electromechanical relays of assessed quality - Full and basic assessment levels) |
| BS 919-1-1960 |
螺紋規極限和公差規范.第1部分:統一型螺紋量規 |
(Specification for screw gauge limits and tolerances - Gauges for screw threads of Unified form) |
| BS 919-2-1971 |
螺紋規極限和公差規范.第2部分:惠氏螺紋量規及英制螺紋量規 |
(Specification for screw gauge limits and tolerances - Gauges for screw threads of Whitworth and BA forms) |
| BS 919-3-1968 |
螺紋規極限和公差規范.第3部分:ISO 米制螺紋量規 |
(Specification for screw gauge limits and tolerances - Gauges for ISO metric screw threads) |
| BS 919-4-1964 |
螺紋規極限和公差規范.第4部分:直徑 1/4英寸以上(含 1/4英寸)的統一型螺紋量規的尺寸極限 |
(Specification for screw gauge limits and tolerances - Limits of size for gauges for screw threads of Unified form diameters) |
| BS 921-1976 |
電氣用橡膠墊規范 |
(Specification - Rubber mats for electrical purposes) |
| BS 9210 N0009-1-1978 |
射頻連接器(SMC系列)詳細規范.不密封、焊接、靜態接觸、50Ω、螺紋連接.全面評定級 |
(Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 ohms, screw coupling - Full assessment level) |
| BS 9210 N0009-2-1978 |
射頻連接器(SMA系列)詳細規范.不密封、焊接、靜態接觸、50Ω、螺紋連接.控制圖.配合面詳圖和測量數據 |
(Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 ohms, screw coupling - Control drawings - Mating face details and gauge information) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com