標準號 |
中文名稱 |
英文名稱 |
| BS EN 1116-2004 |
廚房家具.廚房家具和器具的協調尺寸 |
|
| BS EN 1117-1999 |
熱交換器.液體冷卻制冷劑冷凝器.性能穩定性的試驗方法 |
(Heat exchangers - Liquid-cooled refrigerant condensers - Test methods for establishing the performance) |
| BS EN 1118-1999 |
熱交換器.冷卻液制冷器.性能確定的試驗方法 |
(Heat exchangers - Refrigerant cooled liquid coolers - Test methods for establishing the performance) |
| BS EN 1119-1996 |
塑料管道系統.玻璃增強熱固塑料管和配件.撓性和還原接合接頭密封性和耐損傷性試驗方法 |
(Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joi) |
| BS EN 1120-1996 |
塑料管道系統.玻璃增強熱固塑料管和配件.偏斜條件下部件內部耐化學沖擊性的測定 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition) |
| BS EN 112000-1980 |
電子件質量評定的協調體系.通用規范:變象管和圖象增強管 |
(Harmonized system of quality assessment for electronic components - Generic specification: image converter and image intensifier tubes) |
| BS EN 112001-1980 |
電子件質量保證協調體系.空白詳細規范.圖象轉換器和圖象增強管 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: image converter and image intensifier tubes) |
| BS EN 1121-2000 |
門.在兩種不同氣候間的狀態.試驗方法 |
(Doors - Behaviour between two different climates - Test method) |
| BS EN 1122-2001 |
塑料.鎘的測定.濕分解法 |
(Plastics - Determination of cadmium - Wet decomposition method) |
| BS EN 1123-1-1999 |
污水系統用帶套管的縱向焊接熱浸鍍鋅鋼管及配件.要求、試驗和質量控制 |
(Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Requirements, testing, quality control) |
| BS EN 1123-2-1999 |
污水系統用帶套管和孔座的縱向焊接熱浸鍍鋅鋼管和配件.尺寸 |
(Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions) |
| BS EN 1123-3-2004 |
污水系統用帶插接套的縱向焊接熱浸鍍鋅鋼管及配件.真空排水系統以及造船用排水系統的尺寸和特殊要求 |
|
| BS EN 1124-1-1999 |
污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.要求、測試和質量控制 |
(Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Requirements, testing, quality control) |
| BS EN 1124-2-1999 |
廢水系統用帶龍頭和套管的縱向焊接不銹鋼管道的管和配件.系統S.尺寸 |
(Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System S. Dimensions) |
| BS EN 1124-3-1999 |
污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.系統X、要求 |
(Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System X; dimensions) |
| BS EN 1125-1997 |
建筑硬件.水平棒操作的緊急出口.要求和實驗方法 |
(Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods) |
| BS EN 1127-1-1998 |
爆炸性環境.爆炸防止和防護.基本概念和方法 |
(Explosive atmospheres - Explosion prevention and protection - Basic concepts and methodology) |
| BS EN 1127-2-2002 |
爆炸性環境.爆炸預防和防護.采礦用基本概念和方法 |
(Explosive atmospheres - Explosion prevention and protection - Basic concepts and methodology for mining) |
| BS EN 1128-1996 |
混凝土連接碎料板.硬體沖擊阻力測定 |
(Cement-bonded particleboards - Determination of hard body impact resistance) |
| BS EN 1129-1-1995 |
家具.折疊床.安全技術要求和檢驗方法.安全技術要求 |
(Furniture - Foldaway beds - Safety requirements and testing - Safety requirements) |
| BS EN 1129-2-1995 |
家具.折疊床.安全技術要求和檢驗方法.試驗方法 |
(Furniture - Foldaway beds - Safety requirements and testing - Test methods) |
| BS EN 113-1997 |
木材防腐劑.測定對損害木材的擔子菌綱防護效果的試驗方法.有毒物數值的測定. |
(Wood preservatives - Test method for determining the protective effectiveness against wood destroying basidiomycetes - Determination of the toxic values) |
| BS EN 1130-1-1997 |
家具.家用框形物和搖籃.安全要求 |
(Furniture - Cribs and cradles for domestic use - Safety requirements) |
| BS EN 1130-2-1996 |
家具.家用框形物和搖籃.試驗方法 |
(Furniture - Cribs and cradles for domestic use - Test methods) |
| BS EN 113000-1981 |
電子器件質量評定協調體系.總規范.攝像管 |
(Harmonized system of quality assessment for electronic components - Generic specification: camera tubes) |
| BS EN 113001-1981 |
電子件質量保證協調體系.空白詳細規范.攝像管 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: camera tubes) |
| BS EN 1131-1995 |
果汁和蔬菜汁相對密度的測定方法 |
(Method for determination of the relative density of fruit and vegetable juices) |
| BS EN 1132-1995 |
果汁和蔬菜汁pH值的測定方法 |
(Method determination of the pH-value of fruit and vegetable juices) |
| BS EN 1133-1995 |
果汁和蔬菜汁甲醛值測定方法 |
(Method for determination of formol number of fruit and vegetable juices) |
| BS EN 1134-1995 |
用原子吸收光譜法測定果汁和蔬菜汁中鈉、鉀、鈣和鎂的含量 |
(Method for determination of sodium, potassium, calcium and magnesium contents of fruit and vegetable juices by atomic absorption spectrometry) |
| BS EN 1135-1995 |
果汁和蔬菜汁.灰分測定方法 |
(Fruit and vegetable juices - Method for determination of ash) |
| BS EN 1136-1995 |
果汁和蔬菜汁中磷含量的測定方法:光譜法 |
(Method for determination of phosphorus content of fruit and vegetable juices: spectrometric method) |
| BS EN 1137-1995 |
果汁和蔬菜汁中檸檬酸含量的測定方法:NADH光譜法 |
(Method for determination of citric acid (citrate) content of fruit and vegetable juices: NADH spectrometric method) |
| BS EN 1138-1995 |
測定果汁和蔬菜汁中L-蘋果酸的酶催化法.NADH光譜法 |
(Method for enzymatic determination of L-malic acid (L-malate) content of fruit and vegetable juices - NADH spectrometric method) |
| BS EN 1139-1995 |
果汁和蔬菜汁均勻檸檬酸含量的測定方法.NADPH光譜法 |
Method for determination of DOWND-isocitric acid content of fruit and vegetable juices - NADPH spectrometric method |
| BS EN 1140-1995 |
NADPH光譜法測定果糖和葡萄糖含量的方法 |
(Method for determination of DOWND-glucose and DOWND-fructose content of fruit and vegetable juices - NADPH spectrometric method) |
| BS EN 114000-1984 |
電子器件質量評定協調體系.總規范:光電倍增管 |
(Harmonized system of quality assessment for electronic components: generic specification: photomultiplier tubes) |
| BS EN 114001-1984 |
電子件質量保證協調體系.空白詳細規范.充氣管 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: photomultiplier tubes) |
| BS EN 1141-1995 |
果汁和蔬菜汁中脯氨酸含量的測定方法.光譜法 |
(Method for determination of proline content in fruit and vegetable juices: spectrometric method) |
| BS EN 1142-1995 |
果汁和蔬菜汁中硫酸鹽含量的測定 |
(Method for determination of sulfate content of fruit and vegetable juices) |
| BS EN 1143-1-1997 |
安全存儲單.防盜檢驗的要求,分級和方法.第1部分:錢柜,保險庫門和保險庫 |
(Secure storage units - Requirements, classification and methods of test for resistance to burglary - Safes, strongroom doors and strongrooms) |
| BS EN 1143-1-2005 |
安全存儲裝置.防盜設備的要求、分類和試驗方法.保險柜、ATM保險柜、保險庫門和保險庫 |
|
| BS EN 1143-2-2002 |
安全存儲裝置.防盜檢驗的要求、分類和方法.儲存系統 |
(Secure storage units - Requirements, classification and methods of test for resistance to burglary - Deposit systems) |
| BS EN 1146-1997 |
自救呼吸保護裝置.帶面具的自帶開放線路壓縮空氣呼吸裝置(帶面具的壓縮空氣逃生裝置).要求、試驗和標記 |
(Respiratory protective devices for self-rescue - Self-contained open-circuit compressed air breathing apparatus incorporating a hood (compressed air escape apparatus with hood) - Requirements, testing) |
| BS EN 1147-2001 |
消防用便攜式梯子 |
(Portable ladders for fire service use) |
| BS EN 1148-1999 |
熱交換器.區域供暖用水換熱器.確定性能數據的試驗程序 |
(Heat exchangers - Water-to-water heat exchangers for district heating - Test procedures for establishing the performance data) |
| BS EN 1149-1-1996 |
防護服.靜電性能.第1部分:表面電阻(檢驗方法和要求) |
(Protective clothing - Electrostatic properties - Surface resistivity (test methods and requirements)) |
| BS EN 1149-2-1997 |
防護服裝.靜電特性.通過材料的電阻(垂直電阻)的測量的實驗方法 |
(Protective clothing - Electrostatic properties - Test method for measurement of the electrical resistance through a material (vertical resistance)) |
| BS EN 1149-3-2004 |
防護服.靜電性能.電荷衰減測量的試驗方法 |
|
| BS EN 115-1995 |
自動電梯和乘客輸送帶的制造和安裝的安全規則 |
(Safety rules for the construction and installation of escalators and passenger conveyors) |
| BS EN 1150-1999 |
防護服.非職業用清晰度服裝.試驗方法和要求 |
(Protective clothing - Visibility clothing for non-professional use - Test methods and requirements) |
| BS EN 1151-1999 |
泵.旋轉動力泵.家用熱水安裝和供熱安裝用的電效應不超過200W的循環泵.要求,試驗,標記 |
(Pumps - Rotodynamic pumps - Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations - Requirements, testing, marking) |
| BS EN 1152-1995 |
農業和林業用拖拉機和機械.動力輸出驅動軸保護.耐磨和強度試驗 |
(Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive shafts - Wear and strength tests) |
| BS EN 1153-1996 |
廚房家具.內裝和外放廚柜和工作臺的安全要求和檢驗方法. |
(Kitchen furniture - Safety requirements and test methods for built-in and free standing kitchen cabinets and work tops) |
| BS EN 1154-1997 |
建筑構件.控制門關閉裝置.要求和試驗方法 |
(Building hardware - Controlled door closing devices - Requirements and test methods) |
| BS EN 1155-1997 |
建筑用硬件.旋轉門用明電源驅動器的試驗方法和要求 |
(Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods) |
| BS EN 1158-1997 |
建筑金屬器具.門協調裝置.要求和試驗方法 |
(Building hardware - Door coordinator devices - Requirements and test methods) |
| BS EN 1159-1-2004 |
高級工業陶瓷.陶瓷復合材料.熱機械性能.熱膨脹性的測定 |
|
| BS EN 1159-2-2003 |
高級工業陶瓷.陶瓷復合材料.熱機械性能.熱擴散系數的測定 |
(Advanced technical ceramics - Ceramic composites - Thermophysical properties - Determination of thermal diffusivity) |
| BS EN 1159-3-2003 |
高級工業陶瓷.陶瓷復合材料.熱機械性能.比熱容的測定 |
(Advanced technical ceramics - Ceramic composites - Thermophysical properties - Determination of specific heat capacity) |
| BS EN 116-1998 |
柴油和家用加熱用燃料.冷式過濾器堵塞點的測定 |
(Diesel and domestic heating fuels - Determination of cold filter plugging point) |
| BS EN 1160-1997 |
液化天然氣用設備和裝置.液化天然氣的一般性能 |
(Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas) |
| BS EN 116000-2-1986 |
電子器件質量評定協調體系.總規范:有或無機電繼電器.時間延遲繼電器總數據和試驗方法 |
Harmonized system of quality assessment for electronic components - Generic specification: electromechanical all-or-nothing relays - Generic data and methods of test for time delay relays |
| BS EN 116000-3-1996 |
電子器件質量評定協調體系.總規范:機電“有“或“無“繼電器.試驗和測量程序 |
(Harmonized system of quality assessment for electronic components - Generic specification: electromechanical all-or-nothing relays - Test and measurement procedures) |
| BS EN 1161-1997 |
羽毛和絨毛.檢驗方法.濕度測定 |
(Feather and down - Test methods - Determination of moisture content) |
| BS EN 1162-1997 |
羽毛和絨毛.檢驗方法.氧指數測定 |
(Feather and down - Test methods - Determination of the oxygen index number) |
| BS EN 116200-1992 |
電子件的質量保證協調體系.分規范.機電配電繼電器(包括惡劣的環境條件下用的繼電器) |
(Harmonized system of quality assessment for electronic components - Sectional specification - Electromechanical all-or-nothing relays (including relays for severe environmental conditions)) |
| BS EN 116203-1995 |
電子器件質量評定協調體系規范.空白詳細規范.增強型工業用“有“或“無“機電繼電器 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Electromechanical all-or-nothing relays for enhanced industrial application) |
| BS EN 116204-1995 |
電子器件質量評定協調體系規范.空白詳細規范.攻擊型工業用“有“或“無“機電繼電器 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Electromechanical all-or-nothing sealed relays for aggressive industrial application) |
| BS EN 116205/116206/116207-199 |
電子器件的質量評估系統一致性.空白詳細規范.氣密密封繼電器.用于嚴格的靜態環境條件(116025).用于嚴格的 |
() |
| BS EN 1163-1997 |
羽毛和絨毛.檢驗方法.油含量和脂含量測定 |
(Feather and down - Test methods - Determination of the oil and fat content) |
| BS EN 116300-1994 |
電子器件質量評定協調體系.分規范.經過質量確認的高負荷電器機械配電繼電器(電流強度5A以上) |
(Harmonized system of quality assessment for electronic components - Sectional specification: electromechanical all-or-nothing heavy load relays of assessed quality (rated from 5A and above)) |
| BS EN 116303-1996 |
電子件的質量評定協調體系.機電式“有“或“無“重載繼電器質量評定的空白詳細規范 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: electromechanical all-or-nothing heavy load relays of assessed quality (hermetically sealed, 5A to 25A)) |
| BS EN 1164-1999 |
羽毛和絨毛.試驗方法.水解萃取混濁度的測定 |
(Feather and down - Test methods - Determination of the turbidity of an aqueous extract) |
| BS EN 1165-1997 |
羽毛和絨毛.檢驗方法.水溶解氯化物的測定 |
(Feather and down - Test methods - Determination of water-soluble chlorides) |
| BS EN 1167-1996 |
羽毛和絨毛.羽毛和絨毛被褥尺寸測量的檢驗方法 |
(Feather and down - Method of test for measuring the sizes of quilts filled with feather and/or down) |
| BS EN 1168-2005 |
預制混凝土產品.空芯板 |
|
| BS EN 1169-1999 |
預制混凝土制品.玻璃纖維增強水泥的工廠生產控制的一般規則 |
(Precast concrete products - General rules for factory production control of glass-fibre reinforced cement) |
| BS EN 117-2005 |
木材防腐劑.防犀白蟻屬種(歐洲白蟻)的毒效測定(實驗室法) |
|
| BS EN 1170-1-1998 |
預制混凝土產品.玻璃纖維增強水泥試驗方法.基質堅實度的測量.“坍塌“試驗方法 |
(Precast concrete products - Test method for glass-fibre reinforced cement - Measuring the consistency of the matrix - ’slump test’ method) |
| BS EN 1170-2-1998 |
預制混凝土產品.玻璃纖維增強水泥試驗方法.添加GRC纖維含量的測量.沖刷試驗 |
(Precast concrete products - Test method for glass-fibre reinforced cement - Measuring the fibre content in fresh GRC, ’Wash out test’) |
| BS EN 1170-3-1998 |
預制混凝土產品.玻璃纖維增強水泥的測試方法.噴射GRC纖維含量測定 |
Precast concrete products - Test method for glass-fibre reinforced cement - Measuring the fibre content of sprayed GRC |
| BS EN 1170-4-1998 |
預制混凝土產品.玻璃纖維增強水泥的測試方法.測定抗彎強度.簡易彎曲試驗法 |
Precast concrete products - Test method for glass-fibre reinforced cement - Measuring bending strength - `Simplified bending test` method |
| BS EN 1170-5-1998 |
預制混凝土產品.玻璃纖維增強水泥的測試方法.測定抗彎強度.完全彎曲試驗法 |
Precast concrete products - Test method for glass-fibre reinforced cement - Measuring bending strength, complete bending test method |
| BS EN 1170-6-1998 |
預制混凝土產品.玻璃纖維增強水泥的測試方法.浸漬時水吸收的測定和干密度的測定 |
Precast concrete products - Test method for glass-fibre reinforced cement - Determination of the absorption of water by immersion and determination of the dry density |
| BS EN 1170-7-1998 |
預制混凝土產品.玻璃纖維增強水泥的測試方法.由于濕度引起尺寸變化的極限的測定 |
Precast concrete products - Test method for glass-fibre reinforced cement - Measurement of extremes of dimensional variations due to moisture content |
| BS EN 117000-1992 |
電子件的質量保證協調體系.總規范.經質量保證的半導體繼電器.一般數據和檢驗方法 |
(Harmonized system of quality assessment for electronic components - Generic specification - Solid state all-or-nothing relays - Generic data and methods of test) |
| BS EN 1171-2002 |
工業閥門.鑄鐵閘閥 |
(Industrial valves - Cast iron gate valves) |
| BS EN 1172-1997 |
銅和銅合金.建筑用薄板和帶材 |
Copper and copper alloys - Sheet and strip for building purposes |
| BS EN 1173-1996 |
銅和銅合金.回火狀態的名稱與符號 |
Copper and copper alloys - Material condition or temper designation |
| BS EN 1174-1-1996 |
醫療器械的消毒.微生物法.第1部分:產品的微生物群數的判斷 |
Sterilization of medical devices - Estimation of the population of micro-organisms on product - Requirements |
| BS EN 1174-2-1997 |
醫療器械的消毒.產品的微生物群數的估算.引導 |
Sterilization of medical devices - Estimation of the population of micro-organisms on product - Guidance |
| BS EN 1174-3-1997 |
醫療器械的消毒.產品的微生物群數的估算.微生物技術正確性檢驗法指南 |
Sterilization of medical devices - Estimation of the population of micro-organisms on product - Guide to the methods for validation of microbiological techniques |
| BS EN 1175-1-1998 |
工業貨車安全.電氣安全.電池驅動貨車的一般要求 |
Safety of industrial trucks - Electrical requirements - General requirements for battery powered trucks |
| BS EN 1175-2-1998 |
工業貨車安全.電氣安全.內燃機驅動貨車的一般要求 |
Safety of industrial trucks - Electrical requirements - General requirements for internal combustion engine powered trucks |
| BS EN 1175-3-1998 |
工業貨車安全.電氣安全.內燃機驅動貨車電力傳輸系統的特殊要求 |
Safety of industrial trucks - Electrical requirements - Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
| BS EN 1176-1-1998 |
游樂場器材.一般安全要求和試驗方法 |
Playground equipment - General safety requirements and test methods |
| BS EN 1176-2-1998 |
游樂場設備.秋千試驗方法和附加特殊安全要求 |
Playground equipment - Additional specific safety requirements and test methods for swings |
| BS EN 1176-3-1998 |
游樂場設備.滑梯試驗方法和附加特殊安全要求 |
(Playground equipment - Additional specific safety requirements and test methods for slides) |
| BS EN 1176-4-1998 |
游樂場設備.跑道試驗方法和特殊附加安全要求 |
(Playground equipment - Additional specific safety requirements and test methods for runways) |
| BS EN 1176-5-1999 |
游樂場器材.圓盤傳送帶的附加特殊安全要求和試驗方法 |
(Playground equipment - Additional specific safety requirements and test methods for carousels) |
| BS EN 1176-6-1998 |
游樂場器材.搖擺設備的附加特殊安全要求和試驗方法 |
(Playground equipment - Additional specific safety requirements and test methods for rocking equipment) |
| BS EN 1176-7-1997 |
游樂場器材.安裝指南,檢驗,維護和操作 |
(Playground equipment - Guidance on installation, inspection, maintenance and operation) |
| BS EN 1177-1998 |
沖擊減震游樂場表面修整.安全要求和試驗方法 |
(Impact absorbing playground surfacing - Safety requirements and test methods) |
| BS EN 1179-2003 |
鋅和鋅合金.初級鋅 |
(Zinc and zinc alloys - Primary zinc) |
| BS EN 118-2005 |
木材防腐劑.對犀白蟻屬種(歐洲白蟻)預防作用的測定(實驗室法) |
|
| BS EN 1183-1997 |
與食品接觸的材料和物品.熱沖擊和耐熱沖擊性的檢驗方法 |
Materials and articles in contact with foodstuffs - Test methods for thermal shock and thermal shock endurance |
| BS EN 1184-1997 |
與食品接觸的材料和物品.陶瓷物品透明度的檢驗方法 |
Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles |
| BS EN 1185-1995 |
淀粉及其制品.二氧化硫含量測定.酸滴定法 |
(Starches and derived products - Determination of sulfur dioxide content - Acidimetric method) |
| BS EN 1186-1-2002 |
接觸食品的材料和制品.塑料.第1部分:全遷移試驗條件和試驗方法的選擇指南 |
Materials and articles in contact with foodstuffs - Plastics - Guide to the selection of conditions and test methods for overall migration |
| BS EN 1186-10-2002 |
接觸食品的材料和制品.塑料.進入橄欖油中全遷移析出量的試驗方法(橄欖油不完全萃取時用的改進方法) |
Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into olive oil (modified method for use in cases where incomplete extraction of olive oil occurs) |
| BS EN 1186-11-2002 |
接觸食品的材料和制品.塑料.全遷移到標記C的合成甘油三酸脂混合物的試驗方法 |
Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into mixtures of C-labelled synthetic triglycerides |
| BS EN 1186-12-2002 |
接觸食品的材料和物品.塑料.總遷移的低溫試驗方法 |
Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration at low temperatures |
| BS EN 1186-13-2002 |
接觸食品的材料和制品.塑料.高溫下全遷移物析出量的試驗方法 |
Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration at high temperatures |
| BS EN 1186-14-2002 |
接觸食品的材料和制品.塑料.高溫下全遷移物析出量的試驗方法 |
Materials and articles in contact with foodstuffs - Plastics - Test methods for `substitute tests` for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol |
| BS EN 1186-15-2002 |
接觸食品的材料和制品.塑料.快速萃取異辛烷或95%酒精的脂肪食品塑料析出物遷移量的交替試驗方法 |
(Materials and articles in contact with foodstuffs - Plastics - Alternative test methods to migration into fatty food simulants by rapid extraction into iso-octane and/or 95 % ethanol) |
| BS EN 1186-2-2002 |
接觸食品的材料和物品.塑料.總遷移到橄欖油中的全浸沒試驗方法 |
(Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into olive oil by total immersion) |
| BS EN 1186-3-2002 |
接觸食品的材料和物品.塑料.總遷移到水狀試驗食品中的全浸沒試驗方法 |
(Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into aqueous food simulants by total immersion) |
| BS EN 1186-4-2002 |
接觸食品的材料和物品.塑料.總遷移到橄欖油中的電解槽試驗方法 |
(Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into olive oil by cell) |
| BS EN 1186-5-2002 |
接觸食品的材料和物品.塑料.總遷移到水狀試驗食品中的電解槽試驗方法 |
(Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into aqueous food simulants by cell) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com