標準號 |
中文名稱 |
英文名稱 |
| BS ISO 16820-2004 |
感官分析.方法學.順序分析 |
|
| BS ISO 16862-2003 |
色漆和清漆.抗凹陷性評定 |
(Paints and varnishes - Evaluation of sag resistance) |
| BS ISO 16869-2002 |
塑料.塑料成份中抑真菌化合物效果的評定 |
Plastics - Assessment of the effectiveness of fungistatic compounds in plastics formulations |
| BS ISO 16873-2002 |
液壓流體傳動力.壓力開關.安裝表面 |
Hydraulic fluid power - Pressure switches - Mounting surfaces |
| BS ISO 16874-2004 |
液壓傳動.歧管及其件的標識 |
|
| BS ISO 16881-1-2005 |
起重機.軌道輪和相關觸輪滑軌支撐結構的設計計算.總則 |
|
| BS ISO 16889-2000 |
液壓傳動過濾器.評價過濾器件過濾性能的多路法 |
Hydraulic fluid power filters - Multi-pass method for evaluating filtration performance of a filter element |
| BS ISO 16902-1-2003 |
液壓傳動.用聲強法測定聲功率級的試驗規程.工程法.泵 |
(Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques - Engineering method - Pumps) |
| BS ISO 16915-2004 |
鑄模用工具.直澆口拉出器 |
|
| BS ISO 16916-2004 |
壓模工具.注模工具規格單 |
|
| BS ISO 16929-2003 |
塑料.在中間試劑試驗中明確的堆肥處理的條件下塑料的分解度的測定 |
Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test |
| BS ISO 1700-1995 |
電影技術.8mmS型電影原片.剪切和穿孔尺寸 |
Cinematography - 8 mm type S motion-picture raw stock film - Cutting and perforating dimensions |
| BS ISO 17053-2005 |
鋼和鐵.氧測定.經惰性氣體熔化后的紅外線方法 |
|
| BS ISO 17058-2004 |
鋼鐵.砷含量的測定.分光光度法 |
|
| BS ISO 17081-2004 |
氫滲透的測量方法和用電化學法測定金屬中的氫吸收和遷移 |
|
| BS ISO 17082-2004 |
氣壓傳動.閥.供貨商文件中的數據 |
|
| BS ISO 17101-2004 |
農用機械.轉式和甩刀式割草機.拋擲物體試驗和驗收標準 |
|
| BS ISO 17126-2005 |
土質.污染物對土壤植物群影響的測定.萵苣出苗的篩選試驗(萵苣L.) |
|
| BS ISO 17126-2005 |
土質.污染物對土壤植物影響的測定.萵苣出苗的篩選方法(萵苣L.) |
|
| BS ISO 17155-2003 |
土質.用呼吸曲線測定土壤植物群的個體密度和活性 |
Soil quality - Determination of abundance and activity of soil microflora using respiration curves |
| BS ISO 17166-2000 |
紅斑參考作用光譜和標準紅斑劑量 |
Erythema reference action spectrum and standard erythema dose |
| BS ISO 17202-2002 |
紡織品.單絲紗捻度的測定.松勁和上勁法 |
Textiles - Determination of twist in single spun yarns - Untwist/retwist method |
| BS ISO 17239-2004 |
水果、蔬菜及其產品.砷含量的測定.氫化原子吸收光譜法 |
|
| BS ISO 17240-2004 |
水果和蔬菜制品.錫含量的測定.火焰原子吸收光譜法 |
|
| BS ISO 17247-2005 |
煤.最終分析 |
|
| BS ISO 17266-2002 |
電影.35mm電影膠片上多通道邏輯數字聲控圖片和負片,以及70mm電影膠片上數字聲控圖片和負片.正片和寬度尺寸 |
(Cinematography - Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints) |
| BS ISO 17281-2002 |
在適度高負載速度下(GDOWNiDOWNc 和 KDOWNiDOWNc)抗斷裂韌性的測定 |
Plastics - Determination of fracture toughness (GDOWNiDOWNc and KDOWNiDOWNc) at moderately high loading rates (1 m/s) |
| BS ISO 17282-2004 |
塑料.設計數據的獲取和表示指南 |
|
| BS ISO 17282-2004 |
塑料.設計數據的獲取和表示指南 |
|
| BS ISO 17288-1-2002 |
乘用車.無級駕駛.操縱斷開回路試驗方法 |
Passenger cars - Free-steer behaviour - Steering-release open-loop test method |
| BS ISO 17288-2-2004 |
乘用車.無級變速性能.轉向脈沖開環試驗方法 |
|
| BS ISO 17294-1-2004 |
水質.感應耦合等離子體質譜法(ICP-MS)的應用.通用指南 |
|
| BS ISO 17313-2004 |
土質.使用軟壁滲透儀測定飽和多孔材料的水滲導性 |
|
| BS ISO 17331-2005 |
表面化學分析.從硅片工作標準物質表面采集素的化學方法及其全反射X射線熒光光譜法的測定 |
|
| BS ISO 17332-2001 |
電影攝影.印制在35mm移動彩印膠片的生產商的圖像識別信息 |
Cinematography - Manufacturer printed latent image identification information for 35mm motion-picture colour-print film - Specifications |
| BS ISO 17339-2003 |
船舶和海上技術.救生艇和救生船用海錨 |
(Ships and marine technology - Sea anchors for survival craft and rescue boats) |
| BS ISO 17353-2004 |
水質.選定的有機錫化合物的測定.氣相色譜法 |
|
| BS ISO 17355-2003 |
航天數據和信息傳送系統.CCSDS文件送協議 |
(Space data and information transfer systems - CCSDS file delivery protocol) |
| BS ISO 17355-2004 |
航天數據和信息傳送系統.CCSDS文件送協議 |
|
| BS ISO 17355-2004 |
航天數據和信息傳送系統.CCSDS文件送協議 |
|
| BS ISO 17356-2-2005 |
道路車輛.嵌入式機動車裝置用開放式界面.連接OS、COM和NM的OSEK/VDX規范 |
|
| BS ISO 17357-2003 |
船舶和海上技術.高壓浮式充氣橡膠護舷材 |
(Ships and marine technology - High-pressure floating pneumatic rubber fenders) |
| BS ISO 17359-2004 |
機器的工況監測和診斷.通用指南 |
|
| BS ISO 1738-2004 |
黃油.鹽含量的測定 |
|
| BS ISO 17380-2005 |
土質.易釋放的氰化物和氰化物總含量的測定.連續流量分析法 |
|
| BS ISO 17398-2004 |
安全顏色和安全信號.安全信號的分類、特性和持久性 |
|
| BS ISO 17399-2004 |
航天系統.人機集成 |
|
| BS ISO 17410-2001 |
食品和動物飼料的微生物學.psychrotrophic微生物計數的水平方法 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of psychrotrophic micro-organisms |
| BS ISO 17422-2002 |
塑料.環境問題.標準中環境問題一般導則 |
Plastics - Environmental aspects - General guidelines for their inclusion in standards |
| BS ISO 17432-2005 |
醫療信息學.文電和通信.DICOM持續對象的網上存取 |
|
| BS ISO 17433-2003 |
航天數據和信息傳送系統.數據包遙測業務 |
(Space data and information transfer systems - Packet telemetry services) |
| BS ISO 17470-2004 |
微電子束分析.電子探測微觀分析.用波長色散X射線光譜測定法定性點分析指南 |
|
| BS ISO 17493-2001 |
耐熱服裝和設備.用熱空氣循環爐做耐對流熱試驗的試驗方法 |
Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven |
| BS ISO 17497-1-2004 |
聲學.表面的聲音擴散特性.混響室中無規入射擴散系數的測量 |
|
| BS ISO 17531-2002 |
攝影.沖卷藥液.4-(N-乙基-N-2甲基磺酰氨乙基)2-甲苯二胺倍半硫酸鹽水化合物的規范 |
Photography - Processing chemicals - Specifications for 4-(N-ethyl-N-2- methanesulfonylaminoethyl)-2-methylphenylenediamine sesquisulfate monohydrate |
| BS ISO 1754-1998 |
攝影技術.使用35mm膠片和卷筒軟片制版的照相機.畫面尺寸 |
Photography - Cameras using 35 mm film and roll film - Picture sizes |
| BS ISO 17555-2003 |
塑料.薄膜和薄板.雙軸向取向的聚丙烯(PP)薄膜 |
(Plastics - Film and sheeting - Biaxially oriented polypropylene (PP) films) |
| BS ISO 17556-2003 |
塑料.通過測量呼吸計中的需氧量或放出的二氧化碳量來測定土壤中的最大好氧生物降解能力 |
(Plastics - Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved) |
| BS ISO 17557-2003 |
塑料.薄膜和薄板.鑄造的聚丙烯(PP)薄膜 |
(Plastics - Film and sheeting - Cast polypropylene (PP) films) |
| BS ISO 17559-2004 |
液壓傳動.電控液壓泵.性能特征測定的試驗方法 |
|
| BS ISO 17560-2002 |
表面化學分析.再生離子質量的光譜測定.硅中硼的深仿形方法 |
Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon |
| BS ISO 17564-2001 |
丁腈橡膠.通過碘值測定氫化丁腈橡膠中的剩余未飽和狀態 |
Nitrile rubber - Determination of residual unsaturation in hydrogenated nitrile rubber (HNBR) by iodine value |
| BS ISO 17604-2003 |
食品和動物飼料的微生物學.微生物分析用尸體取樣 |
(Microbiology of food and animal feeding stuffs - Carcass sampling for microbiological analysis) |
| BS ISO 1762-2002 |
紙、紙板和紙漿.在525℃燃燒時殘留物(灰分)的測定 |
Paper, board and pulps - Determination of residue (ash) on ignition at 525 鳦 |
| BS ISO 17631-2002 |
船舶和航海技術.防火船板、救生器具和疏散設施 |
Ships and marine technology - Shipboard plans for fire protection, life-saving appliances and means of escape |
| BS ISO 1766-1999 |
鋪地織物.地毯底層上的毛絨厚度的測定 |
Textile floor coverings - Determination of thickness of pile above the substrate |
| BS ISO 17710-2002 |
塑料.在聚乙胺酯生產中用的聚合物.測定微型滴定法的不飽和等級 |
Plastics - Polyols for use in the production of polyurethane - Determination of degree of unsaturation by microtitration |
| BS ISO 17724-2003 |
圖形符號.詞匯 |
(Graphical symbols - Vocabulary) |
| BS ISO 17733-2004 |
工作場所空氣.汞和無機汞化合物的測定.低溫蒸氣原子吸收光譜測定法或原子熒光光譜測定法 |
|
| BS ISO 17744-2004 |
塑料.作為溫度和壓力函數的比容的測定(pvT圖).活塞裝置法 |
|
| BS ISO 17771-2003 |
塑料.熱固性模制化合物.SMC中纖維潤濕程度的測定 |
(Plastics - Thermoset moulding compounds - Determination of the degree of fibre wetting in SMC) |
| BS ISO 17776-2001 |
石油和天然氣工業.海上生產裝置.危險識別和風險評定用工具和技術的導則 |
Petroleum and natural gas industries - Offshore production installations - Guidance on tools and techniques for hazard identification and risk assessment |
| BS ISO 1781-1995 |
電影技術.直接正面放映用8mmS型電影膠片放映機的用法 |
Cinematography - Projector usage of 8 mm type S motion-picture film for direct front projection |
| BS ISO 1785-1996 |
電影技術.在穿孔8mm、S(1-4)型16mm電影膠片上拷貝的8mm、S型影像區.位置和尺寸 |
Cinematography - Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type S (1-4) - Position and dimensions |
| BS ISO 1787-1996 |
電影技術.8mmS型電影膠片電影攝影機的用法規范 |
Cinematography - Camera usage of 8 mm Type S motion-picture film - Specifications |
| BS ISO 17884-2004 |
船舶和海上技術.快艇用探照燈 |
|
| BS ISO 17899-2004 |
船舶和海上技術.船上窗用電刮水器 |
|
| BS ISO 17900-2002 |
農用掛車.平衡半懸掛式掛車.測定負荷、垂直負荷和軸承負荷 |
Agricultural trailers - Balanced and semi-mounted trailers - Determination of payload, vertical static load and axle load |
| BS ISO 1793-2005 |
電影.16mm電影放映機用片夾(容量610m及以下:尺寸38cm).尺寸 |
|
| BS ISO 1795-2000 |
天然和合成生橡膠.取樣和進一步的準備過程 |
Rubber, raw natural and raw synthetic - Sampling and further preparative procedures |
| BS ISO 17973-2003 |
表面化學分析.中分辨率螺旋電子光譜儀.素分析用能量標度的校準 |
Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis |
| BS ISO 17974-2002 |
表面化學分析.高分辨率螺旋電子光譜儀.素和化學狀態分析用能量標度的校準 |
Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis |
| BS ISO 17993-2002 |
水質.液體對液體萃取后用HPLC熒光檢波在水中對15個多環芳香烴的測定 |
Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction |
| BS ISO 17997-1-2005 |
乳.酪蛋白氮含量測定.間接方法(參照法) |
|
| BS ISO 17997-2-2005 |
乳.酪蛋白氮含量測定.直接方法 |
|
| BS ISO 1803-1998 |
建筑結構.公差.尺寸精度的表示法.原則和術語 |
Building construction - Tolerances - Expression of dimensional accuracy - Principles and terminology |
| BS ISO 18054-2004 |
鳶尾根莖油.鐵含量測定.毛細柱氣相色譜法 |
|
| BS ISO 18054-2004 |
鳶尾根莖油.鐵含量測定.毛細管柱氣相色譜法 |
|
| BS ISO 18055-1-2004 |
攝影和成像.噴墨介質.分類、命名和尺寸.照片級介質(相紙和膠片) |
|
| BS ISO 18064-2003 |
熱塑性彈性體.命名和縮寫的術語 |
(Thermoplastic elastomers - Nomenclature and abbreviated terms) |
| BS ISO 18073-2004 |
水質.三氯至八氯二氧雜環乙烯和呋喃的測定.同位素稀釋HRGC/HRMS法 |
|
| BS ISO 18114-2003 |
表面化學分析.次級離子質譜法.測定離子注入標樣的相對靈敏系數 |
(Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials) |
| BS ISO 18115-2001 |
表面化學分析.詞匯 |
Surface chemical analysis - Vocabulary |
| BS ISO 18118-2005 |
表面化學分析.俄歇電子光譜法和X射線光電子光譜法.同質材料定量分析用實驗室測定相對敏感性系數的使用指南 |
|
| BS ISO 18164-2005 |
乘用車、卡車、公共汽車和摩托車輪胎.滾動阻力測量方法 |
|
| BS ISO 18165-2002 |
石油和天然氣工業.水泥漂浮設備的性能試驗 |
Petroleum and natural gas industries - Performance testing of cementing float equipment |
| BS ISO 1817-1999 |
硫化橡膠.液化效果的測定 |
Rubber, vulcanized - Determination of the effect of liquids |
| BS ISO 1830-2005 |
紙、紙板和紙漿.酸溶性錳的測定 |
|
| BS ISO 1832-2004 |
切削刀具用可轉位刀片.名稱與符號 |
|
| BS ISO 18329-2004 |
乳和乳制品.furosine含量的測定.離子對反相高效液相色譜法 |
|
| BS ISO 18333-2003 |
物料裝卸用托盤.平板托盤用新木制部件的質量 |
Pallets for materials handling - Quality of new wooden components for flat pallets |
| BS ISO 18334-2003 |
材料運輸用托盤.新的木制平托盤的組裝質量 |
Pallets for materials handling - Quality of assembly of new, wooden, flat pallets |
| BS ISO 1834-1999 |
提升用短扁節鏈.驗收的一般條件 |
Short link chain for lifting purposes - General conditions of acceptance |
| BS ISO 1837-2003 |
起重鉤.命名 |
(Lifting hooks - Nomenclature) |
| BS ISO 18395-2005 |
動植物脂肪和油.用高效粒度排除色譜法(HPSEC)測定單酰甘油、二酰甘油、三酰甘油和丙三醇 |
|
| BS ISO 18413-2002 |
液壓傳動裝置.零件和組件的清潔度.與長期收集、分析和數據報告相關的審核文件 |
Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting |
| BS ISO 18431-2-2005 |
機械振動和沖擊.信號處理.傅里葉變換分析用時域窗 |
|
| BS ISO 18436-1-2004 |
機器的工況監測與診斷.人員的培訓與認證要求.認證機構和認證過程的要求 |
|
| BS ISO 18553-2002 |
在聚烯烴管、配件和化合物中色料或炭黑分散程度的評定方法 |
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
| BS ISO 18573-2003 |
輸送帶.試驗大氣和狀態調節期 |
(Conveyor belts - Test atmospheres and conditioning periods) |
| BS ISO 18593-2004 |
食物和動物飼料的微生物學.使用接觸板和拭子的表面取樣技術的水平方法 |
|
| BS ISO 18649-2004 |
機械振動.橋梁動態試驗和調查的測量結果的評價 |
|
| BS ISO 18653-2003 |
齒輪.單個齒輪測量?jī)x器的評價 |
(Gears - Evaluation of instruments for the measurement of individual gears) |
| BS ISO 18669-1-2005 |
內燃機.活塞銷.一般規范 |
|
| BS ISO 18669-2-2005 |
內燃機.活塞銷.檢驗測量原理 |
|
| BS ISO 18738-2003 |
升降機(電梯).升降機提升質量測定 |
(Lifts (elevators) - Measurement of lift ride quality) |
| BS ISO 188-1998 |
硫化或熱塑橡膠.加速老化或耐熱性試驗 |
Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests |
| BS ISO 18852-2005 |
橡膠配合料.多點氮表面積(NSA)和統計厚度表面積(STSA)的測定 |
|
| BS ISO 18857-1-2005 |
水質.所選烷基苯酚的測定.使用液-液萃取和帶質量選擇檢測的氣相色譜法的無過濾樣品法 |
|
| BS ISO 1887-1995 |
紡織玻璃纖維.可燃物質含量的測定 |
Textile glass - Determination of combustible-matter content |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com