標準號 |
中文名稱 |
英文名稱 |
| BS EN 168100-1995 |
電子器件質量評定協調體系.石英晶體器件的分規范.(性能驗收) |
(Harmonized system of quality assessment for electronic components - Sectional specification: quartz crystal units (capability approval)) |
| BS EN 168101-1990 |
電子件的質量保證協調體系.空白詳細規范.石英晶體部件(性能認可) |
(Harmonized system of quality assessment for electronic components - Blank detail specification: quartz crystal units (capability approval)) |
| BS EN 168200-1991 |
電子件質量評定協調系統.分規范:石英晶體部件(資格認證) |
(Harmonized system of quality assessment for electronic components - Sectional specification: quartz crystal units (qualification approval)) |
| BS EN 168201-1996 |
電子器件的質量評估系統一致性.空白詳細規范.石英晶體件(資格認可) |
Harmonized system of quality assessment for electronic components - Blank detail specification - Quartz crystal units - (Qualification approval) |
| BS EN 169-2002 |
個人眼睛保護.在焊接和有關技術中用的濾色鏡.透射率要求和推薦使用 |
Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use |
| BS EN 170-1992 |
專用眼睛保護設備用紫外線濾色鏡規范 |
Specification for ultraviolet filters used in personal eye-protection equipment |
| BS EN 170-2003 |
眼睛防護.紫外線濾光鏡.透射率要求及推薦的使用方法 |
(Personal eye-protection - Ultraviolet filters.Transmittance requirements and recommended use) |
| BS EN 170000-1999 |
電子器件質量評估的協調系統.通用規范:波導型介質諧振器 |
Harmonized system of quality assessment for electronic components - Generic specification: waveguide type dielectric resonators |
| BS EN 170100-2001 |
電子器件的質量評定協調系統.分規范:波導型介質諧振器 |
Harmonized system of quality assessment for electronic components - Sectional specification: Waveguide type dielectric resonators |
| BS EN 170101-2001 |
電子器件質量評定協調體系.波導型介質諧振器.能力批準 |
Harmonized system of quality assessment for electronic components - Blank detail specification - Waveguide type dielectric resonators - Capability approval |
| BS EN 1704-1997 |
塑料管道系統.熱塑塑料閥.彎曲情況下溫度循環后閥門完整性的試驗方法 |
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending |
| BS EN 1705-1997 |
塑料管道系統.熱塑性閥門.經過外部吹煉后閥門完整性試驗方法 |
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow |
| BS EN 1706-1998 |
鋁及鋁合金.鑄件.化學成分和機械性能 |
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
| BS EN 1707-1997 |
注射器、針頭和其它特定醫療器械用有6%(路厄)錐度的圓錐形配件.鎖定配件 |
(Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings) |
| BS EN 1708-1-1999 |
焊接.鋼件基本焊接連接部件.受壓組件 |
(Welding - Basic weld joint details in steel - Pressurized components) |
| BS EN 1708-2-2000 |
焊接.鋼焊接時的基本連接件.無內壓的組件 |
(Welding - Basic weld joint details in steel - Non-internal pressurized components) |
| BS EN 1709-2004 |
載人用索道裝置的安全要求.試運行檢查、維修、操作檢查和檢驗 |
|
| BS EN 1709-2004 |
載人用索道裝置的安全要求.試運行檢查、維修、操作檢查和檢驗 |
|
| BS EN 171-2002 |
個人眼睛保護.紅外濾光鏡.透射率要求和推薦使用 |
(Personal eye-protection - Infrared filters - Transmittance requirements and recommended use) |
| BS EN 171000-2001 |
電子器件的質量評定協調系統.總規范.使用波導型介質諧振器的濾波器 |
(Harmonized system of quality assessment for electronic components - Generic specification - Filters using waveguide type dielectric resonators) |
| BS EN 1711-2000 |
焊接的非損檢驗.通過綜合平面分析對焊接的邊緣電流檢驗 |
Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis |
| BS EN 1712-1997 |
焊接的無損檢驗.焊點超聲波檢測.驗收 |
(Non-destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels) |
| BS EN 1713-1998 |
焊縫的無損檢驗.超聲檢驗.焊縫的表征 |
(Non-destructive examination of welds - Ultrasonic examination - Characterization of indications in welds) |
| BS EN 1714-1998 |
焊點非損檢驗.焊點超聲檢驗 |
(Non destructive examination of welded joints - Ultrasonic examination of welded joints) |
| BS EN 1715-1-1998 |
鋁和鋁合金.繪圖臺.檢驗和交貨技術條件及一般要求 |
(Aluminium and aluminium alloys - Drawing stock - General requirements and technical conditions for inspection and delivery) |
| BS EN 1715-2-1998 |
鋁和鋁合金.繪圖臺.電子應用的特殊要求 |
(Aluminium and aluminium alloys - Drawing stock - Specific requirements for electrical applications) |
| BS EN 1715-3-1998 |
鋁和鋁合金.繪圖臺.機械應用的特殊要求(包括焊接) |
(Aluminium and aluminium alloys - Drawing stock - Specific requirements for mechanical uses (excluding welding)) |
| BS EN 1715-4-1998 |
鋁和鋁合金.繪圖臺.焊接應用的特殊要求 |
(Aluminium and aluminium alloys - Drawing stock - Specific requirements for welding applications) |
| BS EN 1716-1997 |
塑料管道系統.聚乙烯(PE)開孔三通件.安裝好的開孔三通上抗沖擊應力的檢測方法 |
(Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an assembled tapping tee) |
| BS EN 1717-2001 |
防止水裝置中飲用水污染以及防止回流污染的裝置的一般要求 |
(Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow) |
| BS EN 1718-1999 |
光傳送帶.運行光傳送帶產生的靜電場的測量方法 |
(Light conveyor belts - Test method for the measurement of the electrostatic field generated by a running light conveyor belt) |
| BS EN 1719-1999 |
紙和紙板膠粘劑.包裝和一次性用衛生制品.壓力敏感膠粘劑粘著力的測定.環行粘著力的測定 |
Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure-sensitive adhesives - Determination of loop tack |
| BS EN 172-1995 |
工業用人眼保護裝置中強光濾光鏡規范 |
(Specification for sunglare filters used in personal eye-protectors for industrial use) |
| BS EN 1720-1999 |
紙和紙板膠粘劑.包裝和一次性用衛生制品.壓力敏感膠粘劑粘著力的測定.分散性的測定 |
(Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability) |
| BS EN 1721-1999 |
紙張和紙板、包裝材料和一次性衛生產品用膠粘劑.壓敏膠粘劑表面粘性的測量.滾球法測量表面粘性 |
(Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of rolling ball tack) |
| BS EN 1722-1999 |
輕型輸送帶.最大拉伸強度測定的試驗方法 |
(Light conveyor belts - Test method for the determination of the maximum tensile strength) |
| BS EN 1723-2000 |
輕型輸送帶.放松彈性模量測定的試驗方法 |
(Light conveyor belts - Method of test for the determination of the relaxed elastic modulus) |
| BS EN 1724-1999 |
光輸送帶.摩擦系數測定的試驗方法 |
(Light conveyor belts - Test method for the determination of the coefficient of friction) |
| BS EN 1725-1998 |
家具.床和床墊.安全要求和試驗方法 |
(Domestic furniture - Beds and mattresses - Safety requirements and test methods) |
| BS EN 1726-1-1999 |
工業貨車的安全.荷載能力至10000Kg的自行貨車和拉桿拉力至20000N的工業牽引車.一般要求 |
(Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N. General requirements) |
| BS EN 1726-2-2000 |
工業貨車的安全.荷載能力至10000Kg的自行貨車和拉桿拉力至20000N的工業牽引車.帶高架駕駛位的貨車和專為超 |
() |
| BS EN 1727-1998 |
家具.儲藏家具.安全要求和試驗方法 |
(Domestic furniture - Storage furniture - Safety requirements and test methods) |
| BS EN 1728-2001 |
家用家具.座椅.測定強度和耐久性的試驗方法 |
(Domestic furniture - Seating - Test methods for the determination of strength and durability) |
| BS EN 1730-2000 |
家具.桌子.強度、耐久性和穩定性測定的試驗方法 |
(Dometsic furniture - Tables - Test methods for determination of strength, durability and stability) |
| BS EN 1731-1998 |
防止機械和/或熱損害的工業和非工業護目鏡和防護面罩網格類型 |
(Mesh type eye and face protectors for industrial and non-industrial use against mechanical hazards and/or heat) |
| BS EN 1733-2002 |
用于呼吸管道的吸引導管 |
Suction catheters for use in the respiratory tract |
| BS EN 1734-1997 |
橡膠或塑料涂覆織物.耐水滲透性的測定.低壓法 |
(Rubber- or plastics- coated fabrics - Determination of resistance to water penetration - Low-pressure method) |
| BS EN 1735-1997 |
橡膠或塑料涂覆織物.撓性測定 |
(Rubber- or plastics- coated fabrics - Determination of flexibility) |
| BS EN 1736-2000 |
制冷系統和熱泵.柔性管件.振動隔絕器和膨脹節.要求,設計和安裝 |
Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation |
| BS EN 1737-1998 |
高壓蒸氧加氣混凝土或開放結構輕集料混凝土預制件用加筋氈或框架焊縫剪切強度的測定 |
Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| BS EN 1738-1998 |
高壓蒸養加氣混凝土制非荷載增強件的鋼應力測定 |
Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete |
| BS EN 1739-1998 |
帶有開放結構的高壓蒸氧加氣混凝土或輕集料混凝土制合成組件之間的連接共面力剪切強度的測定 |
Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| BS EN 174-2001 |
個人的眼睛保護.向下滑雪用護目器 |
Personal eye-protection - Ski goggles for downhill skiing |
| BS EN 1740-1998 |
優化縱向荷載(垂直分量)下高壓蒸氧加氣混凝土或開放結構輕集料混凝土加筋預制件的性能試驗 |
Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components) |
| BS EN 1741-1998 |
開放結構的由壓熱通氣混凝土或輕集料混凝土構成的預制纖維化合物之間接頭的平板外力的剪切強度的測定 |
Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| BS EN 1742-1998 |
高壓蒸氧加氣混凝土或開放結構輕集料混凝土制多層構件不同層之間剪切強度的測定 |
Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| BS EN 1744-1-1998 |
集料的化學性能試驗.化學分析 |
Tests for chemical properties of aggregates - Chemical analysis |
| BS EN 1744-3-2002 |
集料的化學特性測試.通過過濾集料制備洗提液 |
Tests for chemical properties of aggregates - Preparation of eluates by leaching of aggregates |
| BS EN 1745-2002 |
磚石工程和磚石工程產品.測定設計熱值的方法 |
Masonry and masonry products - Methods for determining design thermal values |
| BS EN 1746-1999 |
機械安全.安全標準噪聲條款的設計指南 |
(Safety of machinery - Guidance for the drafting of the noise clauses of safety standards) |
| BS EN 1748-1-1-2004 |
建筑用玻璃.特種基礎產品.硼硅酸鹽玻璃.定義及一般物理和機械特性 |
|
| BS EN 1748-1-1-2004 |
建筑用玻璃.特種基礎產品.硼硅酸鹽玻璃.定義及一般物理和機械特性 |
|
| BS EN 1748-1-1-2004 |
建筑用玻璃.特種基礎產品.硼硅酸鹽玻璃.定義及一般物理和機械特性 |
|
| BS EN 1748-1-1998 |
建筑玻璃.硼硅酸鹽玻璃 |
Glass in building - Borosilicate glasses |
| BS EN 1748-1-2-2004 |
建筑玻璃.特殊基本產品.硼硅酸鹽玻璃.合格評價.產品標準 |
|
| BS EN 1748-1-2-2004 |
建筑玻璃.特種基礎產品.硼硅酸鹽玻璃.合格評價.產品標準 |
|
| BS EN 1748-1-2-2004 |
建筑玻璃.特種基礎產品.硼硅酸鹽玻璃.合格評價.產品標準 |
|
| BS EN 1748-2-1-2004 |
建筑玻璃.特種基礎產品.玻璃陶瓷.定義及一般物理和機械特性 |
|
| BS EN 1748-2-1-2004 |
建筑用玻璃.特種基礎產品.玻璃陶瓷.定義及一般物理和機械特性 |
|
| BS EN 1748-2-1-2004 |
建筑玻璃.特種基礎產品.玻璃陶瓷.定義及一般物理和機械特性 |
|
| BS EN 1748-2-1-2004 |
建筑玻璃.特種基礎產品.玻璃陶瓷.定義及一般物理和機械特性 |
|
| BS EN 1748-2-1998 |
建筑玻璃.玻璃陶瓷 |
(Glass in building - Glass ceramics) |
| BS EN 1748-2-2-2004 |
建筑玻璃.特殊基本產品.玻璃陶瓷.合格評價/產品標準 |
|
| BS EN 1748-2-2-2004 |
建筑玻璃.特種基礎產品.玻璃陶瓷.合格評價/產品標準 |
|
| BS EN 1748-2-2-2004 |
建筑玻璃.特種基礎產品.玻璃陶瓷.合格評價/產品標準 |
|
| BS EN 175-1997 |
個人防護.焊接和類似加工中眼睛和面部的防護設備 |
(Personal protection - Equipment for eye and face protection during welding and allied processes) |
| BS EN 1751-1999 |
建筑物通風.空氣終端設備.減振器和閥的空氣動力試驗 |
(Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves) |
| BS EN 175100-1993 |
電子器件質量評定協調體系.分規范.印制電路板用雙件式側邊插接器 |
(Harmonized system of quality assessment for electronic components - Sectional specification - Two part and edge socket connectors for printed board applications) |
| BS EN 175101-802-2000 |
電子器件質量評估的協調系統.詳細規范.帶有3或4行上2.54mm基本格柵的高數值觸點印制電路板用兩件式連接器 |
(Harmonized system of quality assessment for electronic components - Detail specification - Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows) |
| BS EN 175101-809-2000 |
電子器件質量評定協調體系.詳細規范.經質量評定的符合CECC 75 101-801的帶有短結構2.54mm格柵的印制電路 |
(Harmonized system of quality assessment for electronic components - Detail specification - Detail Specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compl) |
| BS EN 175101-809-2004 |
電子器件質量評估的協調系統.詳細規范.遵守CECC 75 101-801短版本經質量評定的有2.54mm格柵的印制電路板用兩件式連接器 |
|
| BS EN 175200-1997 |
電子器件質量評定協調體系.分規范:圓連接器 |
(Harmonized system of quality assessment for electronic components - Sectional specification: circular connectors) |
| BS EN 175201-804-2000 |
電子器件質量評定協調系統.詳細規范.環形連接器.螺紋接頭直徑1.6mm圓觸點 |
(Harmonized system of quality assessment for electronic components - Detail specification - Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling) |
| BS EN 1753-1997 |
鎂和鎂合金.鎂合金鑄模和鑄件 |
(Magnesium and magnesium alloys - Magnesium alloy ingots and castings) |
| BS EN 175300-1997 |
電子器件質量評定協調體系.分規范:頻率3MHz以下的扁形連接器 |
(Harmonized system of quality assessment for electronic components - Sectional specification:rectangular connectors for frequencies below 3 MHz) |
| BS EN 175301-801-2000 |
電子器件質量評估的協調系統.詳細規范.帶活動壓接圓觸點的高密度矩形連接器 |
(Harmonized system of quality assessment for electronic components - Detail specification - High density rectangular connectors, round removable crimp contacts) |
| BS EN 175301-803-2000 |
電子器件質量評估的協調系統.詳細規范.矩形連接器.帶不可拆卸鎖定螺釘?shù)暮穸葹?.8mm的平觸點 |
(Harmonized system of quality assessment for electronic components - Detail specification - Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable) |
| BS EN 1754-1997 |
鎂和鎂合金.鎂和鎂合金陽極、鑄錠、鑄件和設計系統 |
(Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings - Designation system) |
| BS EN 1755-2000 |
工業用卡車的安全.在潛在爆炸氣體環境下的操作.在可燃?xì)怏w,蒸氣,潮濕和灰塵下使用 |
(Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust) |
| BS EN 175500-1997 |
電子器件質量評定協調體系.分規范:包括資格認可和能力認可的連接器用輔助輸出電纜 |
(Harmonized system of quality assessment for electronic components - Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval) |
| BS EN 1756-1-2002 |
尾部提升機.輪式運載工具上安裝的平臺提升機.安全要求.運貨用尾部提升機 |
(Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Tail lifts for goods) |
| BS EN 1756-2-2004 |
尾部提升機.輪式運載工具上安裝的平臺提升機.安全要求.客用尾部提升機 |
|
| BS EN 1757-1-2001 |
工業貨車安全.腳踏貨車.叉車 |
(Safety of industrial trucks - Pedestrian propelled trucks - Stacker trucks) |
| BS EN 1757-2-2001 |
工業貨車安全.腳踏貨車.托盤貨車 |
(Safety of industrial trucks - Pedestrian propelled trucks - Pallet trucks) |
| BS EN 1757-3-2002 |
工業貨車安全.腳踏貨車.平板車 |
(Safety of industrial trucks - Pedestrian propelled trucks - Platform trucks) |
| BS EN 1757-4-2003 |
工業貨車安全.腳踏貨車.杠桿式升降機貨盤式貨車 |
(Safety of industrial trucks - Pedestrian propelled trucks - Scissor lift pallet-trucks) |
| BS EN 1758-1998 |
銅及銅合金.以鉛為框架的帶材 |
(Copper and copper alloys - Strip for lead frames) |
| BS EN 1759-1-2004 |
法蘭及其連接件.等級標示的管、閥門、配件和附件用環形法蘭.NPS 1/2到24 鋼法蘭 |
|
| BS EN 1759-1-2004 |
法蘭及其連接件.等級標示的管、閥門、配件和附件用環形法蘭.NPS 1/2到24 鋼法蘭 |
|
| BS EN 1759-3-2004 |
法蘭及其連接件.標注等級的管道、閥門、配件和附件用圓形法蘭.銅合金法蘭 |
|
| BS EN 1759-4-2003 |
法蘭及其連接.管、閥、配件及附件用圓形法蘭(指定等級的).鋁合金法蘭 |
(Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Aluminium alloy flanges) |
| BS EN 1760-1-1998 |
機械安全.壓力敏感防護裝置.壓力敏感墊和壓力敏感樓板的設計和試驗通用規則 |
(Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive mats and pressure sensitive floors) |
| BS EN 1760-2-2001 |
機械安全.壓力敏感防護裝置.壓力敏感墊和壓力敏感樓板的設計和試驗通用規則 |
(Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive edges and pressure sensitive bars) |
| BS EN 1760-3-2004 |
機械安全.壓敏防護裝置.壓敏減震器、板材、線材和類似設備的設計和試驗通用規則 |
|
| BS EN 1760-3-2004 |
機械安全.壓敏防護裝置.壓敏減震器、板材、線材和類似設備的設計和試驗通用規則 |
|
| BS EN 1761-1999 |
燃料卡車提交的橡膠軟管和軟管組件.規范 |
(Rubber hoses and hose assemblies for fuel truck delivery - Specification) |
| BS EN 1762-1998 |
液化石油氣、LPG(液相或氣相)及天然氣用橡膠軟管和軟管組件.規范 |
(Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification) |
| BS EN 1762-2004 |
25巴(2,5MPA)以下液化石油氣(LPG)(液相或氣相)以及天然氣用橡膠軟管和軟管組件.規范 |
|
| BS EN 1765-1998 |
油的吸放裝置的橡膠軟管組件.組件規范 |
(Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies) |
| BS EN 1765-2004 |
油吸放裝置用橡膠軟管組件.組件規范 |
|
| BS EN 1766-2000 |
混凝土結構的保護和修理用產品和系統.試驗方法.試驗用參考混凝土 |
(Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing) |
| BS EN 1767-1999 |
混凝土結構的保護和修理用產品和系統.試驗方法.遠紅外分析法 |
(Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis) |
| BS EN 1770-1998 |
混凝土結構保護和修理的產品和設備.試驗方法.熱膨脹系數的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion) |
| BS EN 1772-2000 |
表面活性劑.浸水法測定潤濕力 |
(Surface active agents - Determination of wetting power by immersion) |
| BS EN 1773-1997 |
紡織物.織物.寬度和長度測定 |
(Textiles - Fabrics - Determination of width and length) |
| BS EN 1774-1998 |
鋅和鋅合金.鑄造用合金.鑄錠和液體 |
(Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid) |
| BS EN 1775-1998 |
燃?xì)夤⿷?yīng).建筑物中的燃?xì)夤艿?最大運轉壓力 |
(Gas supply - Gas pipework in buildings - Maximum operating pressure) |
| BS EN 1776-1999 |
燃?xì)夤⿷?yīng).天然氣測量站.功能要求 |
(Gas supply - Natural gas measuring stations - Functional requirements) |
| BS EN 1777-2004 |
防火和救援服務用液壓升降平臺.安全要求和試驗 |
|
| BS EN 1777-2004 |
防火和救援服務用液壓升降平臺.安全要求和試驗 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com