標準號 |
中文名稱 |
英文名稱 |
| BS 7800-2000 |
機動車燃料.高辛烷值無鉛汽油(超級).規范 |
(Automotive fuel - High octane (super) unleaded petrol - Specification) |
| BS 7801-1995 |
在自動電梯和被使用中的載客傳送帶上工作的安全業務法規 |
(Code of practice for safe working on escalators and passenger conveyors in use) |
| BS 7801-2004 |
自動電梯和載客傳送帶.自動電梯和載客傳送帶的安全工作實施規程 |
|
| BS 7802-1995 |
運籌學名詞術語匯編 |
(Glossary of terms used in operational research) |
| BS 7803-1995 |
帶有一個大于1000V的標稱電壓的高架線用陶瓷材料或玻璃絕緣子指南.穿孔試驗 |
(Guide to insulators of ceramic material or glass for overhead-lines with a nominal voltage greater then 1000 V, puncture testing) |
| BS 7804-1-1995 |
茶葉袋規范.第1部分:托盤和集裝箱運輸茶葉用的標準袋規范 |
(Tea sacks - Specification for a reference sack for palletized and containerized transport of tea) |
| BS 7804-2-1999 |
茶葉袋.茶葉的貨盤裝運和容器運輸袋的性能規范 |
(Tea sacks - Performance specification for sacks for palletized and containerized transport of tea) |
| BS 7805-1-1995 |
直徑尺寸大到(包括)10mm的環煅開槽鉚釘規范 |
(Swaged collar grooved rivets - Specification for sizes up to and including 10 mm diameter) |
| BS 7805-2-1997 |
模壓的帶環槽鉚釘.尺寸在12.7mm至34.9mm之間的鉚釘規范 |
(Swaged collar grooved rivets - Specification for sizes from 12.7 mm up to and including 34.9 mm) |
| BS 7807-1995 |
建筑物(寓所除外)的包括火災探測與警報系統和/或其它安全系統在內的綜合系統的設計、裝配與服務的實施規程 |
(Code of practice for design, installation and servicing of integrated systems incorporating fire detection and alarm systems and/or other security systems for buildings other than dwellings) |
| BS 7808-1995 |
電絕緣材料.耐交流電壓的評定.緒言 |
(Electrical insulating materials - A.C. voltage endurance evaluation - Introduction) |
| BS 7811-2-1995 |
確定電離輻射對絕緣材料影響的導則.第2部分:輻照和試驗規程 |
(Guide for determining the effects of ionizing radiation on insulating materials - Procedures for irradiation and test) |
| BS 7813-1995 |
液態烴類容量計系統的統計控制導則 |
(Guide for statistical control of dynamic liquid hydrocarbon volumetric metering systems) |
| BS 7814-1995 |
含有既可以頭下鎖住又可以防止?jié)L動功能的螺栓和螺釘規范 |
(Specification for bolts and screws incorporating either underhead locking or anti-rotation features) |
| BS 7815-1995 |
帶電表面放電評定導則 |
(Guide for evaluating the discharges from a charged surface) |
| BS 7816-1-1995 |
高聚物中長期輻射老化的測定.調節限制氧化擴散的技術 |
(Determination of long-term radiation ageing in polymers - Techniques for monitoring diffusion-limited oxidation) |
| BS 7816-2-1997 |
高聚物長期輻射下老化的測定.低劑量輻射下老化預測程序 |
(Determination of long-term radiation ageing in polymers - Procedures for predicting ageing at low dose rates) |
| BS 7816-3-1998 |
高聚物長期輻射老化的測定.低壓電纜材料使用時的監測程序 |
(Determination of long-term radiation ageing in polymers - Procedures for in-service monitoring of low-voltage cable materials) |
| BS 7817-1-1995 |
X射線醫療診斷保護裝置.第1部分:材料衰減特性的測定 |
(Protective devices against diagnostic medical X-radiation - Method for determination of attenuation properties of sheet materials) |
| BS 7817-2-1995 |
X射線醫療診斷保護裝置.第2部分:防護玻璃片 |
(Protective devices against diagnostic medical X-radiation - Specification for protective glass plates) |
| BS 7818-1995 |
金屬制行人制止系統規范 |
(Specification for pedestrian restraint systems in metal) |
| BS 7819-1995 |
電氣絕緣材料的耐熱測試分析試驗方法實用導則 |
(Guidelines for application of analytical test methods for thermal endurance testing of electrical insulating materials) |
| BS 7821-1-1995 |
不超過36KV的設備用帶有最高電壓值的50Hz、50-2500KVA三相油浸式配電變壓器.不超過24KV的設備用帶有最高電 |
(Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - General requirements and requirements for transformers with high) |
| BS 7821-2.1-1995 |
不超過36KV的設備用帶有最高電壓值的50Hz、50-2500KVA三相油浸式配電變壓器.帶有高壓和/或低壓端電纜接線盒 |
(Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage a) |
| BS 7821-2.2-1998 |
50HZ,帶不超過36KW設備最高電壓的由50-2500KVA的三相油浸配電變壓器.帶高壓和/或低壓單側電纜盒的配電變壓 |
() |
| BS 7821-2.3-1998 |
50HZ,帶有不超過36KV的設備用高壓由50-2500KVA的三相油浸配電變壓器.帶有在高壓線上和/或低壓線邊電纜盒的 |
() |
| BS 7821-3-1995 |
不超過36KV的設備用帶有最高電壓值的50Hz、50-2500KVA三相油浸式配電變壓器.36KV設備用帶有最高電壓值的變 |
(Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Supplementary requirements for transformers with highest voltage) |
| BS 7821-4-1995 |
不超過36KV的設備用帶有最高電壓值的50Hz、50-2500KVA三相油浸式配電變壓器.帶有非正弦電流的變壓器的額定 |
(Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Determination of the power rating of a transformer loaded with n) |
| BS 7821-6-2002 |
不超過36KV的設備用帶有最高電壓值的50Hz、50～2500KVA三相油浸式配電變壓器.關于加壓波紋密封罐的要求和試 |
(Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Requirements and tests concerning pressurized corrugated tanks) |
| BS 7822-2.1-1999 |
低壓系統內部設備的絕緣配合.應用指南.尺寸確定程序工作單和尺寸確定實例 |
(Insulation coordination for equipment within low-voltage systems - Application guide - Dimensioning procedure worksheets and dimensioning examples) |
| BS 7822-3-1995 |
低壓電氣裝置內部的絕緣配合.第3部分:印制電路板裝配件的為絕緣配合用的涂覆層 |
(Insulation coordination for equipment within low-voltage systems - Use of coatings to achieve insulation coordination of printed board assemblies) |
| BS 7823-1-1995 |
托架滑動軸承.軸承座部件規范 |
(Pedestal plain bearings - Specification for pillow blocks) |
| BS 7823-2-1995 |
軸承座滑動軸承.邊法蘭軸承規范 |
(Pedestal plain bearings - Specification for side flange bearings) |
| BS 7823-3-1995 |
軸承座滑動軸承.中心法蘭軸承規范 |
(Pedestal plain bearings - Specification for centre flange bearings) |
| BS 7824-3.3-1995 |
電工用非纖維素紙規范.各種材料規范.未添加聚芳基酰胺(芳族聚酰胺)紙 |
(Non-cellulosic papers for electrical purposes - Specifications for individual materials - Unfilled aramid (aromatic polyamide) papers) |
| BS 7825-1-1995 |
橡膠和塑料試驗設備的校準.原則和一般要求規范 |
(Calibration of rubber and plastics test equipment - Specification for principles and general requirements) |
| BS 7825-2-1996 |
橡膠和塑料試驗設備的校準.校準程序 |
(Calibration of rubber and plastics test equipment - Calibration procedures) |
| BS 7825-3.1-1997 |
橡膠和塑料試驗設備的校正.校正程序.熱性能 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Thermal properties) |
| BS 7825-3.10-1998 |
橡膠和塑料試驗設備的校正.校正計劃.調節、樣品及試樣制備 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Conditioning, sample and test piece preparation) |
| BS 7825-3.11-1998 |
橡膠和塑料試驗設備的校正.校正計劃.橡膠聚合物的識別和化學性能 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Rubber polymer identification and chemical properties) |
| BS 7825-3.2-1997 |
橡膠和塑料試驗設備的校準.校準表格.電特能 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Electrical properties) |
| BS 7825-3.3-1997 |
橡膠和塑料試驗設備的校準.校準表格.塑料的機械特性 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Mechanical properties of plastics) |
| BS 7825-3.4-1998 |
橡膠和塑料試驗設備的校正.校正計劃.橡膠的機械性能 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Mechanical properties of rubber) |
| BS 7825-3.5-1997 |
橡膠和塑料試驗設備的校準.校準表格.光學和老化特性 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Optical and weathering properties) |
| BS 7825-3.6-1997 |
橡膠和塑料試驗設備的校準.校準表格.尺寸特性 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Dimensional properties) |
| BS 7825-3.7-1998 |
橡膠和塑料試驗設備的校正.校正一覽表.流變性能 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Rheological properties) |
| BS 7825-3.8-1998 |
橡膠和塑料試驗設備的校正.校正計劃.降解和環境特征 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Degradation and environmental properties) |
| BS 7825-3.9-1998 |
橡膠和塑料試驗設備的校正.校正表.易燃性能 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Flammability characteristics) |
| BS 7826-1-1995 |
老化試驗數據的統計分析導則.以正態分布試驗結果平均值為基礎的方法 |
(Guide for the statistical analysis of ageing test data - Methods based on mean values of normally distributed test results) |
| BS 7827-1996 |
運動場地的設計,規定,維護和執行應急聲音系統用實用規程 |
(Code of practice for designing, specifying, maintaining and operating emergency sound systems at sports venues) |
| BS 7830-1996 |
應用軟件用戶用屏幕上文獻加工的設計和準備指南 |
(Guide to the design and preparation of on-screen documentation for users of application software) |
| BS 7831-1995 |
絕緣漆耐熱性試驗規程.電氣強度法 |
(Test procedure for thermal endurance of insulating varnishes - Electric strength method) |
| BS 7832-1995 |
建筑物的特性標準.簡要報告清單.建筑物設計提要的內容 |
(Performance standards in building - Checklist for briefing - Contents of brief for building design) |
| BS 7833-1995 |
有玻璃纖維柄套的消防釜規范 |
(Specification for firefighters’ axes with glass fibre shafts) |
| BS 7834-1995 |
用渦輪表測量密閉風道的氣流的規范 |
(Specification for turbine meters used for the measurement of gas flow in closed conduits) |
| BS 7835-2000 |
受火燃燒影響時有少量排放煙和腐蝕氣體的額定電壓從3800/6600V至19000/33000V以下的交聯聚乙烯或乙丙橡膠擠 |
(Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and cor) |
| BS 7836-1996 |
新的和老化的電絕緣紙的聚合平均粘度測量 |
(Measurement of the average viscometric degree of polymerization of new and aged electric papers) |
| BS 7837-1996 |
大帳篷及類似紡織結構用織物易燃性能規范 |
(Specification for flammability performance for textiles used in the construction of marquees and similar textile structures) |
| BS 7838-1996 |
最大直徑為28 mm的輸送低壓氣體管道系統用波狀不銹鋼半硬式管和有關配件規范 |
(Specification for corrugated stainless steel semi-rigid pipe and associated fittings for low-pressure gas pipework of up to 28 mm) |
| BS 7839-1995 |
有直柄的固體硬質合金端銑刀的尺寸 |
(Solid hardmetal end-mills with parallel shanks - Dimensions) |
| BS 7842-1996 |
帶有預處理螺紋密封特性的安裝在螺紋上的螺栓、螺釘和螺柱 |
Bolts, screws and studs with pre-applied thread sealing feature incorporated into the thread |
| BS 7843-1.1-1996 |
氣象降水?dāng)?shù)據的獲得和管理導則.第1部分:網絡設計.第1節:用戶對氣象數據的要求 |
Guide to the acquisition and management of meteorological precipitation data - Network design - The user requirement for precipitation data |
| BS 7843-1.2-1996 |
氣象降水?dāng)?shù)據的獲取和管理指南.網絡設計.網絡設計和監測 |
Guide to the acquisition and management of meteorological precipitation data - Network design - Network design and monitoring |
| BS 7843-2.1-1996 |
氣象降水?dāng)?shù)據的獲取和管理指南.現場操作和數據管理.現場技術特點 |
Guide to the acquisition and management of meteorological precipitation data - Field practices and data management - Technical aspects in the field |
| BS 7843-2.2-1996 |
氣象降水?dāng)?shù)據的獲得和管理導則.第2部分:野外實習和數據管理.第2節:數據監視和數據制表 |
Guide to the acquisition and management of meteorological precipitation data - Field practices and data management - Methods of observation and data tabulation |
| BS 7843-2.3-1996 |
氣象降水?dāng)?shù)據的獲取和管理指南.現場操作和數據管理.數據管理 |
Guide to the acquisition and management of meteorological precipitation data - Field practices and data management - Data management |
| BS 7843-2.4-1996 |
氣象降水?dāng)?shù)據的獲得和管理導則.第2部分:野外實習和數據管理.第4節:地域降雨量 |
Guide to the acquisition and management of meteorological precipitation data - Field practices and data management - Areal rainfall |
| BS 7843-3.1-1999 |
氣象降水?dāng)?shù)據的采集和管理指南.雨量計規范.蓄水式雨量計 |
(Guide to the acquisition and management of meteorological precipitation data - Specification for raingauges - Storage raingauges) |
| BS 7843-3.2-2005 |
氣象降水?dāng)?shù)據的獲取和管理指南.雨量計的規范.傾杯式雨量計 |
|
| BS 7843-3.2-2005 |
氣象降水?dāng)?shù)據的獲取和管理指南.雨量計的規范 |
|
| BS 7844-1-1996 |
100-250KVA、50Hz、設備電壓不超過36KV的三相干式配電變壓器.第1部分:設備最高電壓不超24KV變壓器用的要求和總要求 |
Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - General requirements and requirements for transformers with highest voltage for equipment not exceeding 24 kV |
| BS 7844-2-1996 |
100-250KVA、50Hz、設備高壓不超過36KV的三相干式配電變壓器.第2部分:設備最高電壓為36KV變壓器的補充要求 |
Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Supplementary requirements for transformers with highest voltage for equipment equal to 36 kV |
| BS 7844-3-1998 |
50HZ,帶不超過36KW設備最高電壓的由50-2500KVA的三相油浸配電變壓器.負載非正弦電流的變壓器額定功率的測定 |
Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Determination of the power rating of a transformer loaded with non-sinusoidal current |
| BS 7845-1996 |
用于BS 3939和BS EN 60617的導則.圖表的制圖符號 |
Guide to the use of BS 3939 and BS EN 60617: Graphical symbols for diagrams |
| BS 7846-2000 |
電纜.受火影響時排放少量煙和腐蝕氣體的600/1000 V 熱固性絕緣鎧裝耐火電纜 |
Electric cables - 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire |
| BS 7847-1996 |
流體動力系統和件.連接件和相關件.標稱壓力 |
Fluid power systems and components - Connectors and associated components - Nominal pressures |
| BS 7848-1996 |
齒輪.齒輪齒的磨損和損傷.術語 |
Gears - Wear and damage to gear teeth - Terminology |
| BS 7849-1-1996 |
石油和液態石油產品.直接靜態測量.垂直儲存箱容量.液壓箱量規質量測量 |
Petroleum and liquid petroleum products - Direct static measurements - Contents of vertical storage tanks - Mass measurement by hydrostatic tank gauging |
| BS 7850-1-1992 |
全面質量管理.管理原則指南 |
Total quality management - Guide to management principles |
| BS 7850-2-1994 |
全面質量管理.第2部分:質量改進方法指南 |
Total quality management - Guidelines for quality improvement |
| BS 7851-1996 |
數字音頻盒式磁帶系統(DAT).DAT電流應用規則 |
Digital audio tape cassette system (DAT) - DAT logo application rule |
| BS 7852-1997 |
小舟和皮船設計的實用規程 |
(Code of practice for design of canoes and kayaks) |
| BS 7853-1996 |
機械振動.路面縱斷面.測量數據的報告 |
(Mechanical vibration - Road surface profiles - Reporting of measured data) |
| BS 7854-1-1996 |
機械振動.通過非旋轉部件的測量評估機械振動.總指南 |
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - General guidelines |
| BS 7854-3-1998 |
機械振動.通過在非旋轉部件上測量的方法評定機械振動.現場測量時額定功率在15kW以上、額定速度在120r/min和 |
(Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min w) |
| BS 7854-4-1998 |
機械振動.非旋轉部件上測量機械振動的評估.不包括航空改型在內的燃?xì)廨啓C(jī)驅動裝置 |
(Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Gas turbine driven sets excluding aircraft derivatives) |
| BS 7854-6-1996 |
機械振動.非旋轉部件上測量機械振動的評估.額定功率在100KW以上的往復式機械 |
(Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Reciprocating machines with power ratings above 100 kW) |
| BS 7855-1-1996 |
磨擦片襯里的附件用米制鉚釘.半管狀鉚釘規范 |
(Metric rivets for the attachment of friction linings - Specification for semi-tubular rivets) |
| BS 7856-1996 |
交流電設計操作規程,動能1級和2級瓦特表 |
(Code of practice for design of alternating current, watthour meters for active energy (classes 1 and 2)) |
| BS 7857-1-1996 |
肉和肉制品微生物檢驗法.假單胞菌spp.的計數 |
(Methods for microbiological examination of meat and meat products - Enumeration of Pseudomonas spp.) |
| BS 7857-2-1996 |
肉和肉制品的微生物檢驗法.乳酸菌計數.30°C時菌落計數技術 |
(Methods for microbiological examination of meat and meat products - Enumeration of lactic acid bacteria - Colony-count technique at 30 鳦) |
| BS 7857-3-1997 |
肉和肉制品的微生物檢驗方法.第3部分:Brochothrix thermosphacta的計數.菌落計數技術 |
(Methods for microbiological examination of meat and meat products - Enumeration of Brochothrix thermosphacta - Colony-count technique) |
| BS 7858-1996 |
安全環境下的人事管理的安全代碼 |
(Code of practice for security screening of personnel employed in a security environment) |
| BS 7858-2004 |
保密環境中各個工作人員的安全隔離.實施規程 |
|
| BS 7859-1996 |
天燃?xì)?熱值、密度和相對密度及化合物沃泊指數的計算 |
(Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition) |
| BS 7861-1-1996 |
煤礦用地層加強支持系統件.巖石錨栓規范 |
(Strata reinforcement support system components used in coal mines - Specification for rockbolting) |
| BS 7861-2-1997 |
煤礦用地層支撐物系統件.管道電纜螺栓規范 |
(Strata reinforcement support system components used in coal mines - Specification for birdcaged cablebolting) |
| BS 7862-1996 |
齒輪.磨削后表面回火腐蝕劑的檢驗 |
(Gears - Surface temper etch inspection after grinding) |
| BS 7863-1996 |
便攜滅火器中滅火介質指示色碼的推薦規程 |
(Recommendations for colour coding to indicate the extinguishing media contained in portable fire extinguishers) |
| BS 7864-1997 |
表面涂層用塑料容器的規范 |
(Specification for plastics containers for surface coatings) |
| BS 7865-1997 |
提供鐵路動力的電接觸鋼軌規范 |
(Specification for steel electrical conductor rail for railway motive power supply) |
| BS 7867-1997 |
飛行器中用便攜式滅火器規范 |
(Specification for portable fire extinguishers for use in aircraft) |
| BS 7868-1996 |
廣播磁帶錄像機校準帶指南 |
(Guide for calibration tapes for broadcast VTRs) |
| BS 787-1-1969 |
礦用式防爆電纜終端箱規范.第1部分:(650V以下三相交流電路用)電動機 直接起動用電纜終端箱 |
(Specification for mining type flameproof gate-end boxes - Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V)) |
| BS 787-2-1968 |
礦用式防爆電纜終端箱規范.第2部分:(650V以下三相交流電路用)帶空氣斷弧斷路器的電纜終端箱 |
(Specification for mining type flameproof gate-end boxes - Gate-end boxes with air-break circuit-breakers (for use on 3-phase a.c. circuits up to 650 volts)) |
| BS 787-3-1971 |
礦用式防爆電纜終端箱規范.第3部分:帶照明變壓器的電纜終端箱 |
(Specification for mining type flameproof gate-end boxes - Gate-end boxes with lighting transformers) |
| BS 787-4-1972 |
礦用式防爆電纜終端箱規范.第4部分:(650V以下三相交流電路用)鉆機用電纜終端箱 |
(Specification for mining type flameproof gate-end boxes - Gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up to 650 V)) |
| BS 7870-1-1996 |
供電與動力裝置用低電壓和常電壓聚合絕緣電纜.總則 |
(LV and MV polymeric insulated cables for use by distribution and generation utilities - General) |
| BS 7870-2-1999 |
配電和發電設施用LV和MV聚合物絕緣電纜.試驗方法 |
(LV and MV polymeric insulated cables for use by distribution and generation utilities - Methods of test) |
| BS 7870-3.10-2001 |
供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.有銅線或鋁導體的PVC隔絕的 |
() |
| BS 7870-3.11-2001 |
供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.有銅線或鋁導體的XLPE隔絕 |
() |
| BS 7870-3.12-2001 |
供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.當有火焰影響時煙和腐蝕性 |
() |
| BS 7870-3.20-2001 |
供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.有銅或鋁導體的PVC隔絕的分 |
(LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated split concentric cables with cop) |
| BS 7870-3.21-2001 |
供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.有銅或鋁導體的XLPE隔絕的 |
(LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated split concentric cables with co) |
| BS 7870-3.40-2001 |
供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.有固態鋁導體的銅線波型同心電纜 |
LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors |
| BS 7870-3.50-2005 |
配電和發電裝置用低壓和常壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.著火時輕微散發煙氣和腐蝕性氣體的有固態鋁導體的銅線波型或螺旋型XLPE絕緣同軸電纜 |
|
| BS 7870-4.10-1999 |
配電和發電設施用低電壓和常電壓聚合物絕緣電纜.額定電壓為11kV和33kV的擠壓絕緣配電電纜的規范.單芯11kV和 |
(LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-co) |
| BS 7870-4.11-1999 |
配電和發電設施用低電壓和常電壓聚合物絕緣電纜.額定電壓為11kV和33kV的擠壓絕緣配電電纜的規范.單芯33kV的鉛護套電纜 |
LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 33 kV lead sheathed cables |
| BS 7870-4.12-2001 |
供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為11KV和33KV的擠壓絕緣配電電纜規范.單芯11KV金屬薄 |
(LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single co) |
| BS 7870-4.13-2001 |
供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為11KV和33KV的擠壓絕緣配電電纜規范.單芯33KV銅線/ |
(LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single co) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com