標準號 |
中文名稱 |
英文名稱 |
| BS ISO 11944-1995 |
薄壁金屬容器用圓體模. 最大容量為10 000 ml 的圓柱形罐和圓錐形罐的普通直徑 |
Round general use light gauge metal containers - Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity |
| BS ISO 11948-1-1997 |
排尿裝置.第1部分:整品檢驗 |
Urine-absorbing aids - Whole-product testing |
| BS ISO 11948-2-1998 |
小便吸收裝置.第2部分:輕度不能自制與低壓條件下短時間液體釋放(泄漏)的測定 |
Urine-absorbing aids - Determination of short-time liquid release (leakage) under conditions of light incontinence and low pressure |
| BS ISO 11962-2002 |
縮微照相.帶16 mm 和35 mm 成卷形式使用的沖擊標記 |
Micrographics - Image mark (blip) used with 16 mm and 35 mm roll microfilm |
| BS ISO 11994-1998 |
起重機.有效性.詞匯 |
Cranes - Availability - Vocabulary |
| BS ISO 11997-1-2005 |
色漆和清漆.耐周期性腐蝕的測定.濕(鹽霧)/干燥/濕度影響試驗 |
|
| BS ISO 12000-2000 |
塑料/橡膠.聚合物的分散及橡膠乳(天然的和合成的)的清析度.試驗方法的定義和復審 |
Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Definitions and review of test methods |
| BS ISO 12003-1-2002 |
農林用拖拉機.窄輪距輪式拖拉機.前置傾翻保護裝置 |
Agricultural and forestry tractors - Narrow-track wheeled tractors - Front-mounted roll-over protective structures |
| BS ISO 12003-2-2002 |
農林用拖拉機.窄輪距輪式拖拉機.后置傾翻保護裝置 |
Agricultural and forestry tractors - Narrow-track wheeled tractors - Rear-mounted roll-over protective structures |
| BS ISO 12006-2-2001 |
建筑施工.施工作業的信息組織.信息分類的框架 |
|
| BS ISO 12006-2-2001 |
建筑施工.施工作業的信息組織.信息分類的框架 |
Building construction - Organization of information about construction works - Framework for classification of information |
| BS ISO 1202-2001 |
香精油.1,8桉樹腦含量的測定 |
Essential oils - Determination of 1,8-cineole content |
| BS ISO 1203-1998 |
攝影技術.卷筒軟片制版照相機.后窗位置 |
Photography - Roll film cameras - Back window location |
| BS ISO 12040-1997 |
印刷技術.印刷和印刷油墨.使用過濾氙弧燈評價色牢度 |
Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light |
| BS ISO 12043-1995 |
滾動軸承.單列角面接觸的滾子軸承.平擋圈和無活塞脹圈槽之間的突緣的倒棱尺寸 |
Rolling bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides |
| BS ISO 12044-1995 |
滾動軸承.單列角面接觸的球軸承.外圈無測推力邊的倒棱尺寸 |
Rolling bearings - Single-row angular contact ball bearings - Chamfer dimensions for outer ring non-thrust side |
| BS ISO 12058-1-1997 |
塑料.使用落球粘度計測定粘度.斜管法 |
Plastics - Determination of viscosity using a falling-ball viscometer - Inclined-tube method |
| BS ISO 1206-2002 |
滾動軸承.尺寸系列為48,49和69的滾針軸承.邊界尺寸和公差 |
Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances |
| BS ISO 12080-1-2000 |
干脫脂奶.維生素A含量的測定.比色法 |
Dried skimmed milk - Determination of vitamin A content - Colorimetric method |
| BS ISO 12080-2-2000 |
干脫脂奶.維生素A含量的測定.高性能液相色譜法 |
Dried skimmed milk - Determination of vitamin A content - Method using high-performance liquid chromatography |
| BS ISO 12081-1999 |
牛奶.鈣含量的測定.滴定法 |
Milk - Determination of calcium content - Titrimetric method |
| BS ISO 12097-1-2003 |
道路車輛.安全氣囊零部件.詞匯 |
(Road vehicles - Airbag components - Vocabulary) |
| BS ISO 12097-3-2003 |
道路車輛.氣囊零部件.充氣機組件的檢驗 |
(Road vehicles - Airbag components - Testing of inflator assemblies) |
| BS ISO 12103-1-1998 |
道路車輛.過濾器評價塵土試驗.第1部分:塵土試驗方法 |
(Road vehicles - Test dust for filter evaluation - Arizona test dust) |
| BS ISO 12103-2-1998 |
道路車輛.過濾器評定用試驗粉塵.氧化鋁試驗粉塵 |
Road vehicles - Test dust for filter evaluation - Aluminium oxide test dust |
| BS ISO 12107-2003 |
金屬材料.疲勞試驗.數據的統計規劃和分析 |
(Metallic materials - Fatigue testing - Statistical planning and analysis of data) |
| BS ISO 12108-2003 |
金屬材料.疲勞試驗.疲勞裂痕增長試驗 |
(Metallic materials - Fatigue testing - Fatigue crack growth method) |
| BS ISO 12124-2001 |
聲學.助聽器真耳聲學特性測量的過程 |
(Acoustics - Procedures for the measurement of real-ear acoustical characteristics of hearing aids) |
| BS ISO 12128-2002 |
滑動軸承.潤滑油孔、油槽油穴.軸襯的尺寸、類型、標記及其應用 |
Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes |
| BS ISO 12129-2-1995 |
滑動軸承.軸、法蘭和止推安裝環的形狀、位置和表面粗糙度的公差 |
Plain bearings - Tolerances on form and position and surface roughness for shafts, flanges and thrust collars |
| BS ISO 12132-2000 |
滑動軸承.薄壁軸瓦質量評價.FMEA設計 |
Plain bearings - Quality assurance of thin-walled half bearings - Design FMEA |
| BS ISO 12140-1999 |
農業機械.農用掛車和拖掛設備.牽引機構 |
(Agricultural machinery - Agricultural trailers and trailed equipment - Drawbar jacks) |
| BS ISO 12141-2002 |
固定污染源的排放.在低濃度時顆粒物質(灰塵)的質量濃度的測定.手工重量分析法 |
(Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method) |
| BS ISO 12142-2001 |
電子成像.驗證光盤上存儲的數據用介質誤差監測和報告技術 |
Electronic imaging - Media error monitoring and reporting techniques for verification of stored data on optical digital data disks |
| BS ISO 12151-1-1999 |
液壓流體力學和一般用途的連接件.軟管配件.有ISO 8434-3 O型環對接密封端的軟管組件 |
Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-3 O-ring face-seal ends |
| BS ISO 12151-2-2003 |
液壓傳動和通用聯接件.軟管接頭.帶ISO 8434-1和ISO 8434-4 O形圈24錐形末端的軟管接頭 |
(Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ?cone connector ends with O-rings) |
| BS ISO 12151-3-1999 |
液壓流體力學和一般應用的連接件.軟管配件.帶ISO 6162法蘭末端的軟管配件 |
Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6162 flange ends |
| BS ISO 12156-2-1999 |
柴油.高頻往復鉆機(HFRR)用潤滑劑性能評定.第2部分:極限值 |
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Limit |
| BS ISO 12164-1-2002 |
帶法蘭接觸面的空心圓錐界面.刀柄.尺寸 |
Hollow taper interface with flange contact surface - Shanks - Dimensions |
| BS ISO 12164-2-2002 |
帶法蘭接觸面的空心圓錐界面.接收器.尺寸 |
Hollow taper interface with flange contact surface - Receivers - Dimensions |
| BS ISO 12165-2000 |
鑄模工具.壓縮、注模和壓鑄模用件.術語和符號 |
Tools for moulding - Components of compression and injection moulds and diecasting dies - Terms and symbols |
| BS ISO 1217-1997 |
容積式壓縮機.驗收試驗 |
Displacement compressors - Acceptance tests |
| BS ISO 12171-2002 |
空間數據和信息傳輸系統.遙控指令.信道服務 |
(Space data and information transfer systems - Telecommand - Channel service) |
| BS ISO 12172-2003 |
空間數據和信息傳輸系統.遙控.數據路由服務 |
(Space data and information transfer systems - Telecommand - Data routing service) |
| BS ISO 12173-2003 |
空間數據和信息傳輸系統.遙控.指令執行程序 |
(Space data and information transfer systems - Telecommand - Command operation procedures) |
| BS ISO 12174-2003 |
空間數據和信息傳輸系統.遙控.數據管理業務的體系規范 |
(Space data and information transfer systems - Telecommand - Architectural specification for the data management service) |
| BS ISO 1219-2-1996 |
流體動力系統和件.圖形符號和電路圖.第2部分:電路圖 |
Fluid power systems and components - Graphic symbols and circuit diagrams - Circuit diagrams |
| BS ISO 12192-2002 |
紙和紙板.壓縮強度.環壓法 |
Paper and board - Compressive strength - Ring crush method |
| BS ISO 12197-1997 |
半圓鍵槽銑刀.尺寸 |
Woodruff keyseat cutters - Dimensions |
| BS ISO 12199-2002 |
用阿拉伯字母表示的多語種術語和字典編輯的數字的字母順序 |
Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet |
| BS ISO 12213-1-1998 |
天然氣.壓縮系數的計算.介紹和導則 |
Natural gas - Calculation of compression factors - Introduction and guidelines |
| BS ISO 12213-2-1998 |
天然氣.壓縮因數的計算.第2部分:摩爾代數運算分析 |
Natural gas - Calculation of compression factors - Calculation using a molar composition analysis |
| BS ISO 12213-3-1998 |
天然氣.壓縮系數的計算.實測物理性能計算 |
Natural gas - Calculation of compression factors - Calculation using measured physical properties |
| BS ISO 12214-2002 |
道路車輛.汽車手控裝置的轉向指示器 |
Road vehicles - Direction-of-motion stereotypes for automotive hand controls |
| BS ISO 12218-1997 |
制圖技術.過程控制.膠印板標記 |
Graphic technology - Process control - Offset platemaking |
| BS ISO 1222-2003 |
攝影.三腳架連接件 |
(Photography - Tripod connections) |
| BS ISO 12222-2001 |
電影攝影.在16mm、35mm和65mm電影膠片上制造廠名的印制和潛在影象的識別.規范和尺寸 |
Cinematography - Manufacturer-printed, latent image identification on 16 mm, 35 mm & 65 mm film - Specifications and dimensions |
| BS ISO 1223-1995 |
電影技術.供電視用電影膠片和幻燈片的畫面.位置和尺寸 |
Cinematography - Picture areas for motion-picture films and slides for television - Position and dimensions |
| BS ISO 1223-2003 |
電影技術.電視用影片畫面.位置和尺寸 |
(Cinematography - Picture areas for motion-picture films for television - Position and dimensions) |
| BS ISO 12231-1997 |
攝影.電子照相機.術語 |
Photography - Electronic still picture cameras - Terminology |
| BS ISO 12232-1998 |
攝影.電子靜物攝影照相機.ISO速度測定 |
Photography - Electronic still-picture cameras - Determination of ISO speed |
| BS ISO 12233-2000 |
攝影.電子靜物照相機.分辨率測量 |
Photography - Electronic still picture cameras - Resolution measurements |
| BS ISO 12234-1-2002 |
電子靜態圖像的成象.可裝卸存儲器.基本可裝卸存儲器模型 |
Electronic still-picture imaging - Removable memory - Basic removable-memory module |
| BS ISO 12234-2-2001 |
電子靜止畫面成像.可去除存儲.TIFF/EP圖像數據格式 |
Electronic still-picture imaging - Removable memory - TIFF/EP image data format |
| BS ISO 12238-2001 |
氣壓液動.方向控制閥門.轉換時間的測量 |
(Pneumatic fluid power - Directional control valves - Measurement of shifting time) |
| BS ISO 12240-1-1998 |
關節軸承.徑向關節軸承 |
Spherical plain bearings - Radial spherical plain bearings |
| BS ISO 12240-2-1998 |
關節軸承.角面接觸徑向關節軸承 |
Spherical plain bearings - Angular contact radial spherical plain bearings |
| BS ISO 12240-3-1998 |
關節軸承.止推關節軸承 |
(Spherical plain bearings - Thrust spherical plain bearings) |
| BS ISO 12240-4-1998 |
關節軸承.徑向關節軸承桿端 |
(Spherical plain bearings - Spherical plain bearing rod ends) |
| BS ISO 12256-2002 |
內十字形槽扳手.米制系列 |
(Drives, internal, cruciform, ribbed - Metric series) |
| BS ISO 12277-2000 |
航空航天.帶鏜孔標準系列浮動自鎖定同軸槽鐵.等級:1100 MPa(室溫)/120℃、1100 MPa(室溫)/235℃、1100 MPa( |
(Aerospace - Gang channel, self-locking, floating, standard series, with counterbore, classifications - 1100 MPa (at ambient temperature)/120 ℃, 1100 MPa (at ambient temperature)/235℃ and 1100 MPa () |
| BS ISO 123-2001 |
橡膠膠乳.取樣 |
Rubber latex - Sampling |
| BS ISO 1230-1995 |
攝影技術.閃光指數的測定 |
(Photography - Determination of flash guide numbers) |
| BS ISO 12303-1995 |
滑滾動軸承.質量特性.機器和加工能力的計算 |
(Plain bearings - Quality characteristics - Calculation of machine and process capabilities) |
| BS ISO 12307-2-2000 |
滑動軸承.卷制襯套的檢驗.內徑檢驗 |
(Plain bearings - Checking of wrapped bushes - Checking the inside diameter) |
| BS ISO 12333-2000 |
航空航天.連續置換液壓發動機.35000KPa系統的一般規范 |
Aerospace - Constant displacement hydraulic motors - General specifications for 35000 kPa systems |
| BS ISO 12334-2000 |
航空航天.液壓的壓力補償?shù)淖兞枯斔捅?35000KPa系統的一般要求 |
Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems |
| BS ISO 12345-2003 |
柴油發動機.燃料噴射設備的清潔度評定 |
(Diesel engines - Cleanliness assessment of fuel injection equipment) |
| BS ISO 12353-1-2002 |
道路車輛.交通事故分析.詞匯 |
Road vehicles - Traffic accident analysis - Vocabulary |
| BS ISO 12353-2-2003 |
道路車輛.交通事故分析.嚴重沖擊測量法的使用指南 |
(Road vehicles - Traffic accident analysis - Guidelines for the use of impact severity measures) |
| BS ISO 12368-2001 |
農用車輛.牽引車輛上機械吊鉤式連接件.試驗方法和要求 |
Agricultural vehicles - Mechanical hook-type connections on towing vehicles - Test methods and requirements |
| BS ISO 1241-2001 |
香精油.酯化值的測定.乙�；昂椭笞杂珊涂傄掖己康脑u(píng)價 |
Essential oils - Determination of ester values, before and after acetylation, and evaluation of the contents of free and total alcohols |
| BS ISO 1242-2001 |
香精油.酸值的測定 |
Essential oils - Determination of acid value |
| BS ISO 12472-2003 |
木制門組件的耐火性.膨脹型密封劑工效的測定方法 |
(Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals) |
| BS ISO 12478-1-1998 |
起重機.維修手冊.概述 |
Cranes - Maintenance manual - General |
| BS ISO 12488-4-2004 |
起重機.輪子和移動及橫動軌道的公差.動臂起重機 |
|
| BS ISO 12488-4-2004 |
起重機.輪子和移動及橫動軌道的公差.動臂起重機 |
|
| BS ISO 125-2003 |
濃縮天然膠乳.堿度測定 |
(Natural rubber latex concentrate - Determination of alkalinity) |
| BS ISO 12606-1997 |
電影攝影.電影和電視磁聲頻錄音膠片的保護和保存 |
Cinematography - Care and preservation of magnetic audio recordings for motion-pictures and television |
| BS ISO 12608-1997 |
電影攝影術.再現電視顯示電視節目評定用放映室和環境條件 |
Cinematography - Room and surround conditions for evaluating television display from telecine reproduction |
| BS ISO 12611-1997 |
電影攝影.35mm磁膠片主片的國際交換用拾音頭音調.規格及安裝 |
Cinematography - Audio head tones for use in international exchange of 35 mm magnetic film masters - Specifications and location |
| BS ISO 12611-2004 |
電影.用于國際素材交換的35mm模擬磁片帶頭檢測信號.規范和位置 |
|
| BS ISO 12611-2004 |
電影.用于國際素材交換的35mm模擬磁片帶頭檢測信號.規范和位置 |
|
| BS ISO 12612-1997 |
電影攝影.接線柱生產材料的交換 |
Cinematography - Interchange of post-production materials |
| BS ISO 12616-2002 |
與翻譯相關的術語 |
Translation-oriented terminography |
| BS ISO 12620-2003 |
術語中的計算機應用.數據目錄 |
(Computer applications in terminology - Data categories) |
| BS ISO 12634-1997 |
制圖技術.用旋轉粘度劑測定糊狀油墨和載色劑的粘著性 |
Graphic technology - Determination of tack of paste inks and vehicles by a rotary tackmeter |
| BS ISO 12635-1996 |
印刷技術.膠版印刷用膠印版.尺寸 |
(Graphic technology - Plates for offset printing - Dimensions) |
| BS ISO 12636-1998 |
印刷技術.膠版印刷用橡皮 |
(Graphic technology - Blankets for offset printing) |
| BS ISO 12637-5-2001 |
印刷技術.印刷藝術的多語種術語.絲網印刷術語 |
(Graphic technology - Multilingual terminology of printing arts - Screen printing terms) |
| BS ISO 12639-1998 |
印刷技術.預壓數字?jǐn)?shù)據交換.成像技術用標識符成像文件格式(TIFF/IF) |
(Graphic technology - Prepress digital data exchange - Tag image file format for image technology (TIFF/IT)) |
| BS ISO 12640-1998 |
圖形技術.預壓數字?jǐn)?shù)據交換.CMYK標準彩色圖像數據(CMKY/SCID) |
(Graphic technology - Prepress digital data exchange - CMYK standard colour image data (CMYK/SCID)) |
| BS ISO 12640-2-2004 |
印刷技術.印前數字?jǐn)?shù)據交換.XYZ/sRGB編碼的標準彩色圖像數據(XYZ/SCID) |
|
| BS ISO 12641-1998 |
圖解技術.預印數字型數據交換.輸入掃描校正色度目標 |
Graphic technology - Prepress digital data exchange - Colour targets for input scanner calibration |
| BS ISO 12642-1997 |
制圖技術.預處理數字?jǐn)?shù)據交換.數據輸入用4種顏色打印加工的特性記述. |
Graphic technology - Prepress digital data exchange - Input data for characterization of 4-colour process printing |
| BS ISO 12644-1997 |
制圖技術.用降落竿粘度計測定糊狀油墨和展色劑的流動性 |
Graphic technology - Determination of rheological properties of paste inks and vehicles by the falling rod viscometer |
| BS ISO 12645-2000 |
圖形技術.過程控制.透射密度計不透明區校準用檢定標準物質 |
Graphic technology - Process control - Certified reference material for opaque area calibration of transmission densitometers |
| BS ISO 12647-1-1997 |
制圖技術.中間色調分離、校對和印刷品制作過程控制.第1部分:媒介變數和測量法 |
Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production prints - Parameters and measurement methods |
| BS ISO 12647-2-1997 |
制圖技術.中性顏色分離、試驗和印刷品的生產控制方法.第2部分:平石版印刷法 |
Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production prints - Offset lithographic processes |
| BS ISO 12647-2-2004 |
印刷技術.網目調分色片、樣張及印刷成品的加工過程控制.膠印 |
|
| BS ISO 12647-3-1998 |
制圖技術.中性顏色分離、試驗和印刷品的生產控制方法.第3部分:新聞紙上的燙金排版膠版印刷法和活字印刷 |
Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production prints - Coldset offset lithography and letterpress on newsprint |
| BS ISO 12647-5-2001 |
印刷技術.網目調分色片、樣張和印刷成品的加工過程控制.絲網印刷 |
Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production prints - Screen printing |
| BS ISO 12648-2003 |
圖形技術.印刷機系統的安全要求 |
(Graphic technology - Safety requirements for printing press systems) |
| BS ISO 12651-2000 |
電子成像.詞匯 |
Electronic imaging - Vocabulary |
| BS ISO 12653-1-2001 |
電子成像.辦公文件黑白掃描用測試標板.特性 |
Electronic imaging - Test target for the black-and-white scanning of office documents - Characteristics |
| BS ISO 12653-2-2001 |
電子成像.辦公文件黑白掃描用測試標板.使用的方法 |
Electronic imaging - Test target for the black-and-white scanning of office documents - Method of use |
| BS ISO 12656-2001 |
縮微照相.穿孔卡片上條形碼的使用 |
Micrographics - Use of bar codes on aperture cards |
| BS ISO 12676-2001 |
耐火制品.耐一氧化碳的測定 |
Refractory products - Determination of resistance to carbon monoxide |
| BS ISO 1268-1-2002 |
纖維增強塑料.試驗板的生產方法.通用條件 |
Fibre-reinforced plastics - Methods of producing test plates - General conditions |
| BS ISO 1268-10-2005 |
纖維增強塑料.試驗板的生產方法.BMC和其他長纖維化合物的注射模塑法.多用途試樣的一般原則和模制 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com