標準號 |
中文名稱 |
英文名稱 |
| BS 2692-2-1956 |
1000V以上交流電熔斷器.第2部分:沖出式熔絲 |
(Fuses for voltages exceeding 1000 V a.c. Expulsion fuses) |
| BS 2692-3-1990 |
1000V以上交流電熔斷器.第3部分:短路功率因數測定指南 |
(Fuses for voltages exceeding 1000 V a.c. Guide to the determination of short circuit power factor) |
| BS 2693-1-1956 |
雙頭螺栓.第1部分:通用雙頭螺拴 |
(Specification for screwed studs - General purpose studs) |
| BS 2693-2-1964 |
雙頭螺栓.第2部分:高級雙頭螺拴(美國標準ASA B1.125級干涉配合螺紋)推薦規范 |
(Specification for screwed studs - Recommendations for high grade studs (with Class 5 interference fit threads to American Standard ASA B1.12)) |
| BS 2697-1976 |
米制模數齒條式齒輪銑刀規范 |
(Specification for rack type gear cutters, metric module) |
| BS 2698-1971 |
攝影軟片用盒與標志規范 |
(Specification for containers and notes for filmstrips) |
| BS 2701-1956 |
里斯-赫吉爾(Rees-Hugill)粉末密度量瓶規范 |
(Specification for Rees-Hugill powder density flask) |
| BS 2713-1966 |
2-乙氧基乙醇(乙二醇-乙基酯)規范 |
(Specification for 2-ethoxyethanol (ethylene glycol monoethyl ether)) |
| BS 2718-1979 |
儲氣瓶用小臺車規范 |
(Specification for gas cylinder trolleys) |
| BS 2723-1956 |
消防人員的皮靴規范 |
(Specification for firemen’s leather boots) |
| BS 2734-1997 |
細頸燒瓶規格 |
(Specification for narrow-necked boiling flasks) |
| BS 2735-1956 |
碘瓶規范 |
(Specification for iodine flasks) |
| BS 2737-1956 |
輻射攝影術揭示的鑄件內部缺陷的詞匯 |
(Terminology of internal defects in castings as revealed by radiography) |
| BS 2738-1-1998 |
眼鏡鏡片.懸掛式眼鏡鏡片光學性能中的公差規范 |
(Spectacle lenses - Specification for tolerances on optical properties of mounted spectacle lenses) |
| BS 2738-3-1991 |
眼鏡鏡片.第3部分:眼鏡配制處方訂單表示的規范 |
(Spectacle lenses - Specification for the presentation of prescriptions and prescription orders for ophthalmic lenses) |
| BS 2738-3-2004 |
眼鏡鏡片.眼鏡配裝處方和定單表示的規范 |
|
| BS 2740-1969 |
簡易煙霧報警器與報警測量器規范 |
(Specification for simple smoke alarms and alarm metering devices) |
| BS 2741-1969 |
簡易煙霧觀察器結構推薦規范 |
(Recommendations for the construction of simple smoke viewers) |
| BS 2742 Addendum No. 1-1972 |
林格爾曼(Ringelmann)與小型鑒煙表的使用說明.林格爾曼數字儀表的刻度 |
(Notes of the use of Ringelmann and miniature smoke charts - The calibration of instruments in Ringelmann number) |
| BS 2742-1969 |
林格爾曼(Ringelmann)與小型鑒煙表的使用說明 |
(Notes on the use of the Ringelmann and miniature smoke charts) |
| BS 2742C-1957 |
林格爾曼鑒煙圖表 |
(Ringelmann chart) |
| BS 2742M-1960 |
小型鑒煙圖表 |
(Miniature smoke chart) |
| BS 2745-2-1993 |
醫用洗滌消毒器.生活垃圾用具洗滌消毒器 |
(Washer-disinfectors for medical purposes - Specification for human waste container washer-disinfectors) |
| BS 2745-3-1993 |
醫用洗滌消毒器.處理生活垃圾用具和送洗衣物除外的洗滌消毒器規范 |
(Washer-disinfectors for medical purposes - Specification for washer-disinfectors except those used for processing human-waste containers and laundry) |
| BS 275-1927 |
鉚釘尺寸(直徑 1/2英寸-1.75英寸)規范 |
(Specification for dimensions of rivets () |
| BS 2751-2001 |
一般用途丁腈橡膠混合物.規范 |
(General purpose acrylonitrile-butadiene rubber compounds - Specification) |
| BS 2752-2003 |
氯丁橡膠化合物規范 |
(Chloroprene rubber compounds - Specification) |
| BS 2754-1976 |
備忘錄.防電擊的電氣設備結構 |
(Memorandum - Construction of electrical equipment for protection against electric shock) |
| BS 2757-1986 |
電氣絕緣耐熱性分級的測定方法 |
(Method for determining the thermal classification of electrical insulation) |
| BS 2761-1983 |
球面接頭規范 |
(Specification for spherical ground joints) |
| BS 2767-1991 |
散熱器的手工操作銅合金閥的規范 |
(Specification for manually operated copper alloy valves for radiators) |
| BS 2769-2.11-1984 |
手持電動工具.第2部分:特殊要求.第11節:混凝土振搗器規范 |
(Hand-held electric motor-operated tools - Particular requirements - Specification for concrete vibrators) |
| BS 2772-2-1989 |
礦山運輸和提升設備.第2部分:鍛鋼制品規范 |
(Colliery haulage and winding equipment - Specification for wrought steel) |
| BS 2772-3-1987 |
礦山運輸和提升設備.1.5%錳鋼鑄件規范 |
(Colliery haulage and winding equipment - Specification for 1.5% manganese steel castings) |
| BS 2775-1987 |
一般實驗室用橡皮塞和橡皮管規范 |
(Specification for rubber stoppers and tubing for general laboratory use) |
| BS 2780-1983 |
皮革術語詞匯 |
(Glossary of leather terms) |
| BS 2782-0-1995 |
塑料的試驗方法.第0部分:引言 |
(Methods of testing plastics - Introduction) |
| BS 2782-0-2004 |
塑料的試驗方法.引言 |
|
| BS 2782-0-2004 |
塑料的試驗方法.引言 |
|
| BS 2782-1 Method 130A-1991 |
塑料的試驗方法.第1部分:熱性能.試驗方法130A:用剛果紅法對聚氯乙烯熱穩定性的測定 |
(Methods of testing plastics - Thermal properties - Determination of the thermal stability of polyvinyl chloride by the Congo red method) |
| BS 2782-1 Method 130C-1993 |
塑料試驗方法.熱特性.聚氯乙烯耐熱性的電導測量方法 |
(Methods of testing plastics - Thermal properties - Determination of the thermal stability of polyvinyl chloride by the conductometric method) |
| BS 2782-1 Method 130D-1993 |
塑料的試驗方法.熱性能.用電位計法測定聚氯乙烯的熱穩定性 |
(Methods of testing plastics - Thermal properties - Determination of the thermal stability of polyvinyl chloride by the potentiometric method) |
| BS 2782-1 Method 131B-1983 |
塑料的試驗方法.熱性能.撓性聚氯乙烯板材加熱老化后延伸性的測定 |
(Methods of testing plastics - Thermal properties - Determination of extensibility after heat ageing of flexible polyvinyl chloride sheet) |
| BS 2782-1 Method 140A-1992 |
塑料的試驗方法.熱特性.接觸小火著火源的臥式和立式樣品燃燒性能的測定 |
(Methods of testing plastics - Thermal properties - Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source) |
| BS 2782-1 Method 140D-1997 |
塑料的試驗方法.第1部分:熱性能.試驗方法140D:550mm×35mm聚氯乙烯薄膜試片的易燃性(實驗室法) |
(Methods of testing plastics - Thermal properties - Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method)) |
| BS 2782-1 Method 140E-1982 |
塑料的試驗方法.熱性能.小型傾鈄試片置于酒精火焰上的可燃性(實驗室法) |
(Methods of testing plastics - Thermal properties - Flammability of a small, inclined test piece exposed to an alcohol flame (laboratory method)) |
| BS 2782-1 Method 150B-1976 |
塑料的試驗方法.第1部分:熱性能.試驗方法150B:撓性聚乙烯混合物冷撓曲溫度的測定 |
(Methods of testing plastics - Thermal properties - Determination of cold flex temperature of flexible polyvinyl compound) |
| BS 2782-1 Method 150C-1983 |
塑料的試驗方法.第1部分:熱性能.試驗方法150C:撓性聚氯乙烯板低溫延伸率的測定 |
(Methods of testing plastics - Thermal properties - Determination of low temperature extensibility of flexible polyvinyl chloride sheet) |
| BS 2782-1 Method 150D-1976 |
塑料的試驗方法.第1部分:熱性能.試驗方法150D:薄膜與薄片的冷裂溫度 |
(Methods of testing plastics - Thermal properties - Cold crack temperature of film and thin sheeting) |
| BS 2782-1 Method 151A-1984 |
塑料的試驗方法.熱性能.撓性聚氯乙烯擠壓混合物冷彎溫度的測定 |
(Methods of testing plastics - Thermal properties - Determination of cold bend temperature of flexible polyvinyl chloride extrusion compound) |
| BS 2782-1 Method 153A-1991 |
塑料的試驗方法.第1部分:熱性能.方法153A:撓性材料抗扭剛度測定(一般方法) |
(Methods of testing plastics - Thermal properties - Determination of stiffness in torsion of flexible materials (general method)) |
| BS 2782-1 Method 153B-1991 |
塑料的試驗方法.第1部分:熱性能.方法153B:撓性材料抗扭剛度測定(氯乙烯混合物法) |
(Methods of testing plastics - Thermal properties - Determination of stiffness in torsion of flexible materials (method for vinyl chloride compounds)) |
| BS 2782-1 Methods 131C and 131 |
塑料的試驗方法.熱性能.熱固性模制材料加熱后(耐熱性)的破碎強度.熱固性層疊板材或模制材料加熱后(耐熱性) |
(Methods of testing plastics - Thermal properties - Crushing strength after heating (heat resistance) of thermosetting moulding material - Crushing strength after heating (heat resistance) of thermoset) |
| BS 2782-1 Methods 134A and 134 |
塑料的試驗方法.熱性能.熱塑塑料的氧化感應時間的測定 |
(Methods of testing plastics - Thermal properties - Determination of the oxidation induction time of thermoplastics) |
| BS 2782-10 Method 1001-1977 |
塑料的試驗方法.第10部分:玻璃纖維增強塑料.試驗方法1001:用巴科爾硬度計測量硬度 |
(Methods of testing plastics - Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor) |
| BS 2782-10 Method 1002-1977 |
塑料的試驗方法.第10部分:玻璃纖維增強塑料.試驗方法1002:灼燒失重的測定 |
(Methods of testing plastics - Glass reinforced plastics - Determination of loss on ignition) |
| BS 2782-10 Method 1003-1977 |
塑料的試驗方法.第10部分:玻璃纖維增強塑料.試驗方法1003:拉伸性能測定 |
(Methods of testing plastics - Glass reinforced plastics - Determination of tensile properties) |
| BS 2782-10 Method 1004-1977 |
塑料的試驗方法.第10部分:玻璃纖維增強塑料.試驗方法1004:調節和試驗用標準大氣壓 |
(Methods of testing plastics - Glass reinforced plastics - Standard atmospheres for conditioning and testing) |
| BS 2782-10 Method 1005-1977 |
塑料的試驗方法.第10部分:玻璃纖維增強塑料.試驗方法1005:撓曲特性的測定 |
(Methods of testing plastics - Glass reinforced plastics - Determination of flexural properties - Three point method) |
| BS 2782-10 Method 1006-1978 |
塑料的試驗方法.第10部分:玻璃纖維增強塑料.試驗方法1006:合成樹脂浸漬的玻璃纖維織物中揮發物和樹脂含量的 |
(Methods of testing plastics - Glass reinforced plastics - Determination of volatile matter and resin content of synthetic resin-impregnated textile glass fabric) |
| BS 2782-11 Method 1101A-1981 |
塑料的試驗方法.第11部分:熱塑性塑料管、配件和閥門.試驗方法1101A:管尺寸的測量 |
(Methods of testing plastics - Thermoplastics pipes, fittings and valves - Measurement of dimensions of pipes) |
| BS 2782-11 Method 1108A-1989 |
塑料的試驗方法.第11部分:熱塑性塑料管、配件和閥門.試驗方法1108A:管界面限定碰撞率 |
(Methods of testing plastics - Thermoplastics pipes, fittings and valves - True impact rate (TIR) boundaries of pipes) |
| BS 2782-11 Method 1109A-1989 |
塑料的試驗方法.第11部分:熱塑性塑料管,配件和閥門.試驗方法1109A:非承壓使用的聚乙烯管和配件的耐壞境應力 |
(Methods of testing plastics - Thermoplastics pipes, fittings and valves - Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications) |
| BS 2782-11 Method 1110-1989 |
塑料的試驗方法.第11部分:熱塑性塑料管、配件和閥門.試驗方法1110:非承壓用聚氯乙烯槽形管的啞鈴狀試樣的抗 |
(Methods of testing plastics - Thermoplastics pipes, fittings and valves - Tensile properties of dumb-bell specimens from PVC gutter profiles of pipes for non-pressure applications) |
| BS 2782-11 Method 1121B-1997 |
塑料的試驗方法.熱塑管、配件和閥門.流體輸送用熱塑管.額定外部直徑和額定壓力.米制系列 |
(Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Metric series) |
| BS 2782-11 Method 1121C-1997 |
塑料的試驗方法.熱塑管、配件和閥門.流體輸送用熱塑管.額定外部直徑和額定壓力.英尺系列 |
(Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Inch-based series) |
| BS 2782-11 Method 1121H-1996 |
塑料的試驗方法.第11部分:熱塑性塑料管、配件和閥門.試驗方法1121H:非承壓輸送液體用熱塑性塑料管.塑料管頭 |
(Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the transport of liquids under pressure - Calculation of head losses) |
| BS 2782-11 Method 1127P-1997 |
塑料試驗方法.熱塑管,配件和閥門.液體輸送用熱塑材管.抗內壓力.試驗方法 |
(Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes, for the conveyance of fluids - Resistance to internal pressure - Test method) |
| BS 2782-11 Method 1150B-1998 |
塑料試驗方法.熱塑管,配件和閥門.塑料管道和配件.用對接熔法的聚乙烯(PE)管/管或管道/配件試驗組件的準備 |
(Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion) |
| BS 2782-11 Method 1150E-1997 |
塑料的試驗方法.第11部分:熱塑性塑料管,配件和閥門.試驗方法1150E:塑料管和配件.聚乙烯管和電熔融配件之間 |
(Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitti) |
| BS 2782-2 Method 241A-1984 |
塑料的試驗方法.電氣性能.聚氯乙烯混合物對聚乙烯損耗角正切向影響的測定 |
(Methods of testing plastics - Electrical properties - Determination of effect of polyvinyl chloride compound on the loss tangent of polyethylene) |
| BS 2782-3 Method 323A-1996 |
塑料試驗方法.機械特性.拉伸振動.非共振方法 |
(Methods of testing plastics - Mechanical properties - Tensile vibration - Non-resonance method) |
| BS 2782-3 Method 323B-1996 |
塑料的試驗方法.第3部分:機械性能.試驗方法323B:彎曲振動.非共振法 |
(Methods of testing plastics - Mechanical properties - Flexural vibration - Non-resonance method) |
| BS 2782-3 Method 323C-1996 |
塑料試驗方法.機械特性.剪切振動.非共振方法 |
(Methods of testing plastics - Mechanical properties - Shear vibration - Non-resonance method) |
| BS 2782-3 Method 323D-1996 |
塑料試驗方法.機械特性.扭轉振動.非共振方法 |
(Methods of testing plastics - Mechanical properties - Torsional vibration - Non-resonance method) |
| BS 2782-3 Method 323E-1997 |
塑料試驗方法.機械性能.徑向剪切震動,波的傳播方法 |
(Methods of testing plastics - Mechanical properties - Longitudinal and shear vibration - Wave-propagation method) |
| BS 2782-3 Method 323F-1997 |
塑料試驗方法.機械性能.拉伸震動.聲脈沖的傳播方法 |
(Methods of testing plastics - Mechanical properties - Tensile vibration - Sonic-pulse propagation method) |
| BS 2782-3 Method 327A-1993 |
塑料的試驗方法.機械性能.聚四氟乙烯制品抗拉強度與斷裂伸長率的測定 |
(Methods of testing plastics - Mechanical properties - Determination of tensile strength and elongation at break of polytetrafluoroethylene (PTFE) products) |
| BS 2782-3 Method 332A-1976 |
塑料的試驗方法.第3部分:機械性能.試驗方法332A:塑料薄膜的韌性 |
(Methods of testing plastics - Mechanical properties - Stiffness of plastics film) |
| BS 2782-3 Method 341A-1977 |
塑料的試驗方法.第3部分:機械性能.試驗方法341A:增強塑料表觀層間剪切強度的測定 |
(Methods of testing plastics - Mechanical properties - Determination of apparent interlaminar shear strength of reinforced plastics) |
| BS 2782-3 Method 346A-1984 |
塑料的試驗方法.第3部分:機械性能.試驗方法346A:疊層管各層間粘附力的測定 |
(Methods of testing plastics - Mechanical properties - Determination of cohesion between layers of laminated tube) |
| BS 2782-3 Method 352E-1996 |
塑料試驗方法.機械特性.自由落體法測定抗沖擊性(階梯法) |
(Methods of testing plastics - Mechanical properties - Determination of impact resistance by the free-falling dart method (staircase method)) |
| BS 2782-3 Method 352F-1996 |
塑料試驗方法.機械特性.自由落體法測定抗沖擊性(儀器穿孔試驗) |
(Methods of testing plastics - Mechanical properties - Determination of impact resistance by the free-falling dart method (instrumented puncture test)) |
| BS 2782-3 Method 360A-1991 |
塑料的試驗方法.第3部分:機械性能.方法360A.用Elonendorf法測定塑料薄膜和塑料片的抗撕裂性能 |
(Methods of testing plastics - Mechanical properties - Determination of tear resistance of plastics film and sheeting by the Elmendorf method) |
| BS 2782-3 Method 360B-1991 |
塑料的試驗方法.第3部分:機械性能.方法360B.用褲型撕裂法測定塑料薄膜和塑料片的抗撕裂性能 |
(Methods of testing plastics - Mechanical properties - Determination of tear resistance of plastics film and sheeting by the trouser tear method) |
| BS 2782-3 Method 360C-1991 |
塑料的試驗方法.第3部分:機械性能.方法360C.用引發法測定塑料薄膜和塑料片的抗撕裂性能 |
(Methods of testing plastics - Mechanical properties - Determination of tear resistance of plastics film and sheeting by the initiation method) |
| BS 2782-3 Method 365A-1976 |
塑料的試驗方法.第3部分:機械性能.試驗方法365A:撓性塑料材料韌性度值的測定 |
(Methods of testing plastics - Mechanical properties - Determination of softness number of flexible plastics materials) |
| BS 2782-3 Method 370-1996 |
塑料的試驗方法.第3部分:機械性能.試驗方法370:用砂輪測定耐磨性 |
(Methods of testing plastics - Mechanical properties - Determination of resistance to wear by abrasive wheels) |
| BS 2782-3 Methods 340A and 340 |
塑料的試驗方法.第3部分:機械性能.試驗方法340A:模制材料剪切強度測定.340B:板材剪切強度測定 |
(Methods of testing plastics - Mechanical properties - Determination of shear strength of moulding material - Determination of shear strength of sheet material) |
| BS 2782-4 Method 432A-1991 |
塑料的試驗方法.第4部分:化學性能.試驗方法432A:不飽和聚酯樹脂基增強塑料中殘余苯乙烯單體含量的測定 |
(Methods of testing plastics - Chemical properties - Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins) |
| BS 2782-4 Method 432D-1995 |
塑料的試驗方法.第4部分:化學性能.試驗方法432D:不飽和聚酯樹脂蒸發苯值的測定 |
(Methods of testing plastics - Chemical properties - Determination of styrene evaporation from unsaturated polyester resins) |
| BS 2782-4 Method 433A-1979 |
塑料的試驗方法.第4部分:化學性能.試驗方法433A:環氧樹脂與縮水甘油脂無機氯的測定 |
(Methods of testing plastics - Chemical properties - Determination of inorganic chlorine in epoxide resins and glycidyl esters) |
| BS 2782-4 Method 434B-1977 |
塑料的試驗方法.第4部分:化學性能.試驗方法434B:用氯仿萃取物紫外線吸收法測定聚烯烴混合料的抗氧化劑 |
(Methods of testing plastics - Chemical properties - Determination of antioxidants in polyolefin compounds by ultra-violet absorption of the chloroform extract) |
| BS 2782-4 Method 434D-1975 |
塑料的試驗方法.第4部分:化學性能.試驗方法434D:用分光光度法測定聚烯烴混合料的抗氧化劑 |
(Methods of testing plastics - Chemical properties - Determination of antioxidants in polyolefin compounds by a spectrophotometric method) |
| BS 2782-4 Method 451A-1978 |
塑料的試驗方法.化學性能.酚醛模制件的丙酮可溶物的測定 |
(Methods of testing plastics - Chemical properties - Determination of acetone-soluble matter in phenolic mouldings) |
| BS 2782-4 Method 451B-1978 |
塑料的試驗方法.化學性能.酚醛模制材料在模制后丙酮可溶物的測定 |
(Methods of testing plastics - Chemical properties - Determination of acetone-soluble matter in phenolic moulding materials after moulding) |
| BS 2782-4 Method 452B-1993 |
塑料測試方法.化學特性.聚烯烴化合物中炭黑含量測定 |
(Methods of testing plastics - Chemical properties - Determination of carbon black content of polyolefin compound) |
| BS 2782-4 Method 452C-1979 |
塑料的試驗方法.化學性能.低密度聚乙烯混合料丁基橡膠含量的測定 |
(Methods of testing plastics - Chemical properties - Determination of butyl rubber content of low density polyethylene compounds) |
| BS 2782-4 Method 453A-1978 |
塑料的試驗方法.第4部分:化學性能.試驗方法453A:用氣相色譜法測定聚苯乙烯中殘余苯乙烯單體 |
(Methods of testing plastics - Chemical properties - Determination of residual styrene monomer in polystyrene by gas chromatography) |
| BS 2782-4 Method 453C-1996 |
塑料的試驗方法.第4部分:化學性能.試驗方法453C:用氣相色譜法測定苯乙烯/丙烯腈共聚物中殘余丙烯腈單體的含 |
(Methods of testing plastics - Chemical properties - Determination of residual acrylonitrile monomer content in styrene/acrylonitrile copolymers using gas chromatography) |
| BS 2782-4 Method 454D-1978 |
塑料的試驗方法.第4部分:化學性能.試驗方法454D:聚氯乙烯樹脂揮發物測定 |
(Methods of testing plastics - Chemical properties - Determination of volatile matter (including water) of PVC resins) |
| BS 2782-4 Method 454G-1996 |
塑料的試驗方法.化學特性.高聚物分散法.篩分余值的測定(大分子和凝固物含量) |
(Methods of testing plastics - Chemical properties - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content)) |
| BS 2782-4 Method 470B-1999 |
塑料試驗方法.化學性能.聚對苯二甲酸乙酯灰分的測定 |
(Methods of testing plastics - Chemical properties - Determination of ash of polyalkylene terephthalates) |
| BS 2782-4 Method 470C-1991 |
塑料的試驗方法.第4部分:化學性能.試驗方法470C:未增塑醋酸纖維素灰分的測定 |
(Methods of testing plastics - Chemical properties - Determination of ash of unplasticized cellulose acetate) |
| BS 2782-4 Methods 451F to 451J |
塑料的試驗方法.化學性能.酚醛模制材料的甲醛含量測定(比色法).酚醛模制材料的甲醛含量測定(重量法).酚醛模 |
() |
| BS 2782-4 Methods 452D to 452F |
塑料的試驗方法.化學性能.聚烯烴混合物水萃取物pH值測定.聚烯烴混合物水可溶硫酸鹽含量測定.聚烯烴混合物水 |
(Methods of testing plastics - Chemical properties - Determination of pH of water extract of polyolefin compound - Determination of water-soluble sulphates in polyolefin compound - Determination of wat) |
| BS 2782-5 Method 520A-1992 |
塑料的試驗方法.風化條件下光學性能和顏色性能.鏡面光澤度的測定 |
(Methods of testing plastics - Optical and colour properties, weathering - Determination of specular gloss) |
| BS 2782-5 Method 521A-1992 |
塑料的試驗方法.風化條件下光學性能和顏色性能.塑料薄膜和薄板霾度的測定 |
(Methods of testing plastics - Optical and colour properties, weathering - Determination of haze of film and sheet) |
| BS 2782-5 Method 540C-1988 |
塑料的試驗方法.第5部分:風化條件下的光學和顏色性能.試驗方法540C:用聚砜膠片測定紫外線輻射強度 |
(Methods of testing plastics - Optical and colour properties, weathering - Determination of ultraviolet radiation intensity using polysulphone film) |
| BS 2782-5 Method 540F-1995 |
塑料的試驗方法.風化條件下的光學和顏色特性.曝露在實驗室燈光下的方法.熒光紫外燈源 |
(Methods of testing plastics. Optical and colour properties, weathering. Methods of exposure to laboratory light sources. Fluorescent UV lamps) |
| BS 2782-5 Method 540G-1995 |
塑料的試驗方法.風化條件下的光學和顏色特性.曝露在實驗室燈光下的方法.有焰碳弧燈源 |
(Methods of testing plastics - Optical and colour properties, weathering - Methods of exposure to laboratory light sources - Open flame carbon-arc lamps) |
| BS 2782-5 Method 542A-1979 |
塑料的試驗方法.第5部分:光學和顏色特性.試驗方法542A:顏料滲色的定性評定 |
(Methods of testing plastics. Optical and colour properties. Qualitative evaluation of bleeding of colorants) |
| BS 2782-5 Method 552A-1999 |
塑料試驗方法.風化后光學和顏色特性.在透過玻璃的日光、 自然風化和試驗室光源下暴露后顏色和形狀改變的測 |
(Methods of testing plastics - Optical and colour properties, weathering - Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or) |
| BS 2782-5 Methods 530A and 530 |
塑料的試驗方法.風化下光學和顏色性能.黃色指數測定.近似白色或近似無色材料的測定 |
(Methods of testing plastics - Optical and colour properties, weathering - Determination of yellowness index - Determination of the colour of near-white or near-colourless materials) |
| BS 2782-6 Method 621C-1983 |
塑料的試驗方法.尺寸特性.模制材料體積系數的測定 |
(Methods of testing plastics - Dimensional properties - Determination of the bulk factor of moulding materials) |
| BS 2782-6 Method 621D-1978 |
塑料的試驗方法.尺寸特性.聚氯乙烯樹脂壓實表觀體密度的測定 |
(Methods of testing plastics - Dimensional properties - Determination of compacted apparent bulk density of PVC resins) |
| BS 2782-6 Method 630A-1994 |
塑料的試驗方法.尺寸特性.用機械掃描法測定撓性片厚度 |
(Methods of testing plastics - Dimensional properties - Determination of thickness by mechanical scanning of flexible sheet) |
| BS 2782-6 Method 631A-1993 |
塑料的試驗方法.尺寸特性.柔性板的重量分析厚度和屈服性的測定 |
(Methods of testing plastics - Dimensional properties - Determination of gravimetric thickness and yield of flexible sheet) |
| BS 2782-6 Method 632A-1993 |
塑料的試驗方法.尺寸特性.柔性板長度和寬度的測定 |
(Methods of testing plastics - Dimensional properties - Determination of length and width of flexible sheet) |
| BS 2782-6 Method 640A-1979 |
塑料的試驗方法.尺寸特性.熱固性模制材料壓制模塑棒材試樣的收縮量測定 |
(Methods of testing plastics - Dimensional properties - Determination of shrinkage of test specimens in the form of bars of compression moulded thermosetting moulding materials) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com