標準號 |
中文名稱 |
英文名稱 |
| BS EN 20693-1992 |
縫焊盤狀電極坯料尺寸 |
(Dimensions of seam welding wheel blanks) |
| BS EN 207-1999 |
個人眼睛保護.抗激光輻射用濾光鏡和護目器(激光護目鏡) |
(Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors)) |
| BS EN 2070-1-1991 |
鋁和鋁合金鍛制品規范.技術規范.一般要求 |
(Specification for aluminium and aluminium alloy wrought products - Technical specification - General requirements) |
| BS EN 2070-2-1991 |
鋁和鋁合金鍛制品規范.技術規范.薄板、帶材和平板 |
(Specification for aluminium and aluminium alloy wrought products - Technical specification - Sheet, strip formed profiles and plate) |
| BS EN 2070-3-1991 |
鋁和鋁合金鍛制品規范.技術規范.棒材和型材 |
(Specification for aluminium and aluminium alloy wrought products - Technical specification - Bar and section) |
| BS EN 2070-4-1991 |
鋁和鋁合金鍛制品規范.技術規范.結構管 |
(Specification for aluminium and aluminium alloy wrought products - Technical specification - Tube for structures) |
| BS EN 2070-5-1991 |
鋁和鋁合金鍛制品規范.技術規范.壓力下用管 |
(Specification for aluminium and aluminium alloy wrought products - Technical specification - Tube used under pressure) |
| BS EN 2070-6-1991 |
鋁和鋁合金鍛制品規范.技術規范.鉚釘用金屬絲 |
(Specification for aluminium and aluminium alloy wrought products - Technical specification - Rivet wire) |
| BS EN 2070-7-1991 |
鋁和鋁合金鍛制品規范.技術規范.鍛坯 |
(Specification for aluminium and aluminium alloy wrought products - Technical specification - Wrought forging stock) |
| BS EN 2071-2002 |
航空航天系列.鋁及鋁合金板.厚度0.25mm |
(Aerospace series - Sheets in aluminium and aluminium alloys - Thickness 0,25 mm) |
| BS EN 2072-1994 |
AL-P1050A-H14鋁合金.0.4-6mm的薄板與帶材 |
(Aluminium alloy AL-P1050A-H14 - Sheet and strip 0,4 mm) |
| BS EN 2076-1-1991 |
鋁和鎂合金鑄錠和鑄件.技術規范.一般要求 |
(Aluminium and magnesium alloy ingots and castings - Technical specification - General requirements) |
| BS EN 2076-2-1991 |
鋁和鎂合金鑄錠和鑄件.技術規范.冶煉用鑄錠 |
(Aluminium and magnesium alloy ingots and castings - Technical specification - Ingots for remelting) |
| BS EN 2076-3-1991 |
鋁和鎂合金鑄錠和鑄件.技術規范.預制件和產品鑄件 |
(Aluminium and magnesium alloy ingots and castings - Technical specification - Pre-production and production castings) |
| BS EN 2078-2002 |
航空航天系列.金屬材料.制造表、檢驗表、檢驗和試驗報告.定義、一般原則、準備和批準 |
(Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval) |
| BS EN 2079-1995 |
儀器和設備用有耐腐蝕鋼法蘭的精密球軸承 |
(Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment - Dimensions and loads) |
| BS EN 208-1999 |
人眼防護.激光和激光系統調節工作用護目鏡(激光調節護目鏡) |
(Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)) |
| BS EN 20811-1982 |
紡織纖維.耐水滲透性的測定.靜水壓試驗 |
(Textiles - Determination of resistance to water penetration - Hydrostatic pressure test) |
| BS EN 2082-1-1991 |
鋁合金鍛坯和鍛件規范.技術規范.一般要求 |
(Specification for aluminium alloy forging stock and forgings - Technical specification - General requirements) |
| BS EN 2082-2-1991 |
鋁合金鍛坯和鍛件規范.技術規范.鍛坯 |
(Specification for aluminium alloy forging stock and forgings - Technical specification - Forging stock) |
| BS EN 2082-3-1991 |
鋁合金鍛坯和鍛件規范.技術規范.試制件和產品鍛件 |
(Specification for aluminium alloy forging stock and forgings - Technical specification - Pre-production and production forgings) |
| BS EN 2083-2001 |
航空航天系列.電纜用銅及銅合金導體.產品標準 |
(Aerospace series - Copper and copper alloy conductors for electrical cables - Product standard) |
| BS EN 20865-1992 |
凸焊機臺板槽 |
(Slots in platens for projection welding machines) |
| BS EN 2089-1994 |
AL-P2014A T6或T62鋁合金.0.4mm-6mm的薄板及帶材 |
(Aluminium alloy AL-P2014A-T6 or T62 - Sheet and strip 0,4 mm) |
| BS EN 2089-2005 |
AL-P2014A T6或T62鋁合金.0.4mm-6mm的薄板及帶材 |
|
| BS EN 20898-2-1994 |
緊固件的機械性能.第2部分:有規定的檢驗載荷值的螺母.粗牙螺紋 |
(Mechanical properties of fasteners - Nuts with specified proof load values - Coarse thread) |
| BS EN 20898-7-1995 |
緊固件機械性能.標稱直徑為1MM到10MM的螺栓和螺絲的扭轉試驗和最小扭矩 |
(Mechanical properties of fasteners - Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm) |
| BS EN 209-2000 |
鋼柱桶.最小總?cè)莘e為210升的可拆卸蓋(活動蓋)柱桶 |
(Steel drums - Removable head (open head) drums with a minimum total capacity of 210 l) |
| BS EN 2090-2005 |
鋁合金AL-P2024-T3.覆層薄板和帶材.0.3 mm≤a≤6 mm |
|
| BS EN 2092-1994 |
AL-P7075-T6或T62鋁合金.0.4-6mm層覆薄板及帶材 |
(Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip 0,4 mm) |
| BS EN 2093-1992 |
AL-P 7009-T74鋁合金.20mm≤a≤150mm手工鍛件 |
(Aluminium alloy AL-P7009-T74 - Hand forgings 20 mm) |
| BS EN 2094-1992 |
AL-P 7009-T74鋁合金.3mm≤a≤150mm模鍛件 |
(Aluminium alloy AL-P7009-T74 - Die forgings 3 mm) |
| BS EN 210-2000 |
鋼柱桶.最小總?cè)莘e為216.5升的不可拆卸蓋(固定蓋)柱桶 |
(Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 216,5 l) |
| BS EN 2100-1992 |
AL-P2014A-T4511鋁合金.a或D≤200mm的擠壓棒材和型材 |
(Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D) |
| BS EN 2101-1991 |
鋁合金和鍛鋁合金鉻酸陽極化規范 |
(Specification for chromic acid anodizing of aluminium and wrought aluminium alloys) |
| BS EN 2103-1-1992 |
鋼,鎳基合金以及鈷基合金再熔料和鑄件.技術規范.一般要求 |
(Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - General requirements) |
| BS EN 2103-2-1992 |
鋼、鎳基合金及鈷基合金再熔料和鑄件.技術規范.再熔料 |
(Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Remelting stock) |
| BS EN 2103-3-1992 |
鋼、鎳基合金及鈷基合金再熔料和鑄件.技術規范.試制鑄件和產品鑄件 |
(Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Pre-production and production castings) |
| BS EN 2104-1996 |
丙烯腈-丁二烯-橡膠(NBR).硬度:40 IRHD |
(Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD) |
| BS EN 21089-1992 |
點焊設備用電極錐度配合.尺寸 |
(Electrode taper fits for spot welding equipment - Dimensions) |
| BS EN 212-2003 |
木材防腐劑.木材防腐劑及處理過的木材分析用抽樣和制備的通用指南 |
(Wood preservatives - General guidance on sampling and preparation for analysis of wood preservatives and treated timber) |
| BS EN 2122-1996 |
扁平鋁合金墊圈規范 |
(Washers, flat, in aluminium alloy, anodized or chromated) |
| BS EN 2126-1992 |
AL-P7075-T651鋁合金.6mm≤a≤80mm板材 |
(Aluminium alloy AL-P7075-T651 - Plate 6 mm) |
| BS EN 2127-1992 |
AL-P7075-T73511鋁合金.a或D≤100mm的擠壓棒材和型材 |
(Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D) |
| BS EN 2128-1992 |
AL-P7075-T7351鋁合金.6mm≤a或D≤75mm拉制棒材 |
(Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm) |
| BS EN 2130-2001 |
航空航天系列.儀器和設備用防腐蝕鋼制的軸承和精密滾珠.技術規范 |
(Aerospace Series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification) |
| BS EN 2131-2002 |
航空航天系列.鋁合金板.厚度6mm $0L a |
(Aerospace series - Plates in aluminium alloys - Thickness 6 mm) |
| BS EN 2133-1998 |
帶有規定拉力(LE)1450 MPa,銅,銅合金和鎳合金的鋼的鎘鍍層 |
(Cadmium plating of steels with specified tensile strength) |
| BS EN 2134-2002 |
航空航天系列.鋁及鋁合金擠制圓棒.直徑10mm |
(Aerospace series - Round bars, extruded in aluminium and aluminium alloys - Diameter 10 mm) |
| BS EN 2138-2000 |
鋼制鍍鎘平墊圈 |
(Washers, flat, in steel, cadmium plated) |
| BS EN 2139-1990 |
扁鋼耐熱鋼墊圈規范 |
(Specification for washers, flat heat resisting steel) |
| BS EN 2143-1993 |
1050A型鋁制的一般頭型實心鉚釘.英制系列 |
(Rivets, solid, universal head, in aluminium 1050A, inch based series) |
| BS EN 2144-1994 |
鋁合金2117,英寸系列,實心,萬能分度頭鉚釘 |
(Rivets, solid, universal head, in aluminium alloy 2117, inch based series) |
| BS EN 2145-1994 |
經過陽極氧化或鉻酸鹽處理的2117號鋁合金制一般頭形實心英制系列鉚釘 |
(Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series) |
| BS EN 2146-1993 |
2017A型鋁制的一般頭型實心鉚釘.英制系列 |
(Rivets, solid, universal head, in aluminium alloy 2017A, inch based series) |
| BS EN 2148-1993 |
5056A型鋁制的一般頭型實心鉚釘.英制系列 |
(Rivets, solid, universal head, in aluminium alloy 5056A, inch based series) |
| BS EN 2149-1996 |
經陽極氧化處理或經鉻酸鹽處理的5056A型鋁合金制一般頭型實心鉚釘.英制系列 |
(Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series) |
| BS EN 215-1-1991 |
恒溫散熱閥.要求和試驗方法 |
(Thermostatic radiator valves - Requirements and test methods) |
| BS EN 215-2004 |
恒溫散熱器控制閥.要求和試驗方法 |
|
| BS EN 2155-12-1997 |
飛機門窗玻璃用透明材料的試驗方法.線性熱膨脹測定 |
(Specification for test methods for transparent materials for aircraft glazing - Determination of linear thermal expansion) |
| BS EN 2155-13-1993 |
飛機玻璃門窗用透明材料的試驗方法.負荷條件下彎曲時溫度的測定 |
(Test methods for transparent materials for aircraft glazing - Determination of temperature at deflection under load) |
| BS EN 2155-14-1993 |
飛機門窗玻璃用透明材料的試驗方法.1/10維卡特軟化溫度的測定 |
(Test methods for transparent materials for aircraft glazing - Determination of the 1/10 Vicat softening temperature) |
| BS EN 2155-19-1997 |
飛機門窗玻璃用透明材料的試驗方法規范.抗裂紋特性測定 |
(Specification for test methods for transparent materials for aircraft glazing - Determination of craze resistance) |
| BS EN 2155-1997 |
飛機玻璃門窗用透明材料的試驗方法規范.抗微裂的測定 |
(Specification for test methods for transparent materials for aircraft glazing. Determination of craze resistance) |
| BS EN 2155-2-1993 |
飛機門窗玻璃用透明材料試驗方法規范.吸水性的測定 |
(Specification for test methods for transparent materials for aircraft glazing - Determination of water absorption) |
| BS EN 2155-21-1989 |
飛機門窗玻璃用透明材料的試驗方法規范.防裂紋擴展測定(K系數) |
(Specification for test methods for transparent materials for aircraft glazing - Determination of resistance to crack propagation (K factor)) |
| BS EN 2155-3-1993 |
飛機窗玻璃透明材料試驗方法.折射率的測定 |
(Specification for test methods for transparent materials for aircraft glazing - Determination of refractive index) |
| BS EN 2155-5-1989 |
飛行器玻璃窗透明材料試驗方法規范.可見光透射測定 |
(Specification for test methods for transparent materials for aircraft glazing - Determination of visible light transmission) |
| BS EN 2155-7-1997 |
飛機門窗玻璃用透明材料用試驗方法的規范 |
(Specification for test methods for transparent materials for aircraft glazing - Determination of optical deviation) |
| BS EN 2155-8-1989 |
飛機門窗玻璃用透明材料的試驗方法規范.光學畸變測定 |
(Specification for test methods for transparent materials for aircraft glazing - Determination of optical distortion) |
| BS EN 2155-9-1989 |
飛機門窗玻璃用透明材料的試驗方法規范.薄霧測定 |
(Specification for test methods for transparent materials for aircraft glazing - Determination of haze) |
| BS EN 2157-1-1993 |
航空航天系列.鋼.鍛坯和鍛件.技術規范.第1部分:一般要求 |
(Steel - Forging stock and forgings - Technical specifications - General requirements) |
| BS EN 2157-2-1993 |
鋼.鍛坯和鍛件.技術規范.第2部分:鍛坯 |
(Steel - Forging stock and forgings - Technical specifications - Forging stock) |
| BS EN 2157-3-1993 |
鋼.鍛坯和鍛件.技術規范.第3部分:預生產和生產用鍛件 |
(Steel - Forging stock and forgings - Technical specifications - Pre-production and production forgings) |
| BS EN 21683-1994 |
聲學.聲級測量用的優先參考數值 |
(Acoustics - Preferred reference quantities for acoustic levels) |
| BS EN 21864-1994 |
信息技術.信息交換用12.7mm(0.5in)寬的空白磁帶.32ftpmm(800ftpi)IBM式不歸零(NRZI)、126ftpmm(3200ftpi)相 |
(Information technology - Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange - 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi) NRZ1) |
| BS EN 21942-1-1992 |
牙科詞匯.第1部分:一般和臨床術語 |
(Dental vocabulary - General and clinical terms) |
| BS EN 21942-2-1993 |
牙科詞匯.第2部分:牙科材料 |
(Dental vocabulary - Dental materials) |
| BS EN 21942-3-1994 |
牙科詞匯.牙科儀器 |
(Dental vocabulary - Dental instruments) |
| BS EN 21942-4-1994 |
牙科詞匯.第4部分:牙科設備 |
(Dental vocabulary - Dental equipment) |
| BS EN 21974-1990 |
紙.抗扯裂試驗(埃爾門多夫法) |
(Paper - Determination of tearing resistance (Elmendorf method)) |
| BS EN 22063-1994 |
金屬和其他無機涂層.熱噴涂.鋅、鋁及其合金 |
(Metallic and other inorganic coatings - Thermal spraying - Zinc, aluminium and their alloys) |
| BS EN 22206-1988 |
滿包運輸包裝件.在試驗時各部件的識別方法 |
(Complete, filled transport packages - Method for identifying parts when testing) |
| BS EN 22248-1986 |
滿包運輸包裝件.耐垂直跌落碰撞的性能測定方法 |
(Complete, filled transport packages - Method for determination of resistance to vertical impact by dropping) |
| BS EN 22313-1992 |
紡織纖維品.用測量橫折樣品的回復角度對折縫的回復的測定 |
(Textile fabrics - Determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery) |
| BS EN 22339-1992 |
未淬硬錐銷 |
(Taper pins, unhardened) |
| BS EN 22340-1992 |
無頭U形銷 |
(Clevis pins without head) |
| BS EN 22341-1992 |
有頭U形銷 |
(Clevis pins with head) |
| BS EN 2236-1992 |
合金鋼緊公差手柄帶頭銷釘.技術規范 |
(Pins, headed, close tolerance shank, in alloy steel - Technical specification) |
| BS EN 22401-1994 |
涂料電焊條.高效、金屬回收和熔敷系數的測定 |
(Covered electrodes - Determination of the efficiency, metal recovery and deposition coefficient) |
| BS EN 2243-2-1991 |
結構膠粘劑試驗方法.剝離金屬-金屬 |
(Structural adhesives - Test methods - Peel metal-metal) |
| BS EN 2243-3-1992 |
結構用粘結劑.第3部分:試驗方法.剝離試驗用金屬蜂窩狀?yuàn)A心材料 |
(Structural adhesives - Test methods - Peeling test metal-honeycomb core) |
| BS EN 2243-4-1991 |
結構膠粘劑試驗方法.金屬-蜂窩狀芯扁平面向下的彈性試驗 |
(Structural adhesives - Test methods - Metal-honeycomb core flatwise tensile test) |
| BS EN 2243-5-1992 |
結構用膠粘劑試驗方法.第5部分:老化試驗 |
(Test methods for structural adhesives - Ageing tests) |
| BS EN 22553-1995 |
焊接、銅焊和軟釬焊連接件.制圖符號表示 |
(Welded, brazed and soldered joints - Symbolic representation on drawings) |
| BS EN 2257-1997 |
鋁和鋁合金結構用圓管.直徑為6mm |
(Circular tubes for structures in aluminium and aluminium alloys - Diameter 6 mm) |
| BS EN 2258-1997 |
鋁和鋁合金流體設備用圓管.直徑為3.2mm |
(Circular tubes for fluids in aluminium and aluminium alloys - Diameter 3,2 mm) |
| BS EN 2259-1995 |
硅樹脂橡膠(VMQ).硬度:50 IRHD(國際橡膠硬度標度) |
(Silicone rubber (VMQ) - Hardness 50 IRHD) |
| BS EN 2260-1995 |
硅樹脂橡膠(VMQ).硬度:60 IRHD(國際橡膠硬度標度) |
(Silicone rubber (VMQ) - Hardness 60 IRHD) |
| BS EN 2261-1995 |
硅樹脂橡膠(VMQ).硬度:70 IRHD(國際橡膠硬度標度) |
(Silicone rubber (VMQ) - Hardness 70 IRHD) |
| BS EN 2262-1995 |
高撕裂強度的硅合成橡膠(VMQ/PVMQ).硬度:50 IRHD |
(Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD) |
| BS EN 2264-1996 |
鍍鎘合金鋼制MoS2潤滑的帶各種深度鏜孔的雙耳浮動自鎖系緊螺母.等級:900MPa(室溫)/235℃ |
(Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated MoSDOWN2 lubricated - Classification: 900 MPa (at ambient temperature) /235 鳦) |
| BS EN 22719-1994 |
石油及其產品的試驗方法.石油產品和潤滑油.汽油的起爆溫度的測定.賓-馬氏封閉式閃點測定法 |
(Methods of test for petroleum and its products - Petroleum products and lubricants - Determination of flash point - Pensky-Martens closed cup method) |
| BS EN 22768-1-1993 |
通用公差.無單項公差標注的線性和角度尺寸公差 |
(General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications) |
| BS EN 22768-2-1993 |
通用公差.第2部分:未單獨標注公差的幾何公差 |
(General tolerances - Geometrical tolerances for features without individual tolerance indications) |
| BS EN 228-2000 |
汽車燃料.無鉛汽油.要求和試驗方法 |
(Automotive fuels - Unleaded petrol - Requirements and test methods) |
| BS EN 228-2004 |
機動車燃料.無鉛汽油.要求和試驗方法 |
|
| BS EN 2282-1992 |
飛行器電源特性 |
(Characteristics of aircraft electrical supplies) |
| BS EN 2283-1996 |
檢驗飛機上電纜的敷設 |
(Testing of aircraft wiring) |
| BS EN 2284-1991 |
鋁合金和鍛鋁合金硫酸陽極化規范 |
(Specification for sulfuric acid anodizing of aluminium and wrought aluminium alloys) |
| BS EN 2285-1990 |
具有自潤滑襯套的鋁合金軸套規范.尺寸和負荷 |
(Specification for bushes plain, aluminium alloy with self-lubricating liner - Dimensions and loads) |
| BS EN 22858-1993 |
端吸式離心泵(額定壓力16巴).命名、工作特點和尺寸 |
(End-suction centrifugal pumps (rating 16 bar) - Designation, nominal duty point and dimensions) |
| BS EN 2286-1990 |
具有自潤滑襯套的鋁合金法蘭軸套筒規范.尺寸和負荷 |
(Specification for bushes flanged, aluminium alloy with self-lubricating liner - Dimensions and loads) |
| BS EN 2287-1990 |
具有自潤滑襯套的抗腐蝕鋼軸套筒規范.尺寸和負荷 |
(Specification for bushes plain, corrosion resisting steel with self-lubricating liner - Dimensions and loads) |
| BS EN 22872-1993 |
完整滿裝運輸包裝耐壓縮性的測定方法 |
(Complete, filled transport packages - Method for determination of resistance to compression) |
| BS EN 22874-1986 |
滿包運輸包裝件.壓縮試驗機用堆放試驗方法 |
(Complete, filled transport packages - Method of test for stacking using compression tester) |
| BS EN 22876-1986 |
滿包運輸包裝件.耐滾動破壞的性能測定方法 |
(Complete, filled transport packages - Method for determination of resistance to damage by rolling) |
| BS EN 2288-1990 |
具有自潤滑襯套的抗腐蝕鋼法蘭軸套筒規范.尺寸和負荷 |
(Specification for bushes flanged, corrosion resisting steel with self-lubricating liner - Dimensions and loads) |
| BS EN 2289-1996 |
飛行控制用鋁合金棒體.技術規范 |
(Rod bodies in aluminium alloy for flight controls - Technical specification) |
| BS EN 2290-1-1998 |
飛行控制可調節終端配件的鋁合金桿.尺寸和荷載 |
(Rod bodies, flight control in aluminium alloy, for adjustable end fittings - Dimensions and loads) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com