標準號 |
中文名稱 |
英文名稱 |
| BS 3473-4.2-1989 |
制作實驗室玻璃器皿用玻璃的耐化學腐蝕性.第4部分:玻璃容器內表面耐水解性的測定方法.第2節:火焰光度測定法 |
(Chemical resistance of glass used in the production of laboratory glassware - Methods for determination of hydrolytic resistance of the interior surfaces of glass containers - Determination by flame p) |
| BS 3473-5-1987 |
制作實驗室玻璃器皿用玻璃的耐化學腐蝕性.玻璃耐100℃ 6 mol/L鹽酸腐蝕性 |
(Chemical resistance of glass used in the production of laboratory glassware - Method for determination of resistance of glass to attack by 6 mol/L hydrochloric acid at 100 鳦) |
| BS 3475-1976 |
醫院用的碗架規范 |
(Specification for bowl stands for use in hospitals) |
| BS 3482-1-1991 |
干燥劑試驗方法.第1部分:試驗樣品的取樣、制備和儲存 |
(Methods of test for desiccants - Sampling, and preparation and storage of test samples) |
| BS 3482-10-1991 |
干燥劑試驗方法.第10部分:容積密度(干組份)測定 |
(Methods of test for desiccants - Determination of bulk density (dry basis)) |
| BS 3482-11-1991 |
干燥劑試驗方法.第11部分:易碎性物和粉末含量的測定 |
(Methods of test for desiccants - Determination of friability and dust content) |
| BS 3482-2-1991 |
干燥劑試驗方法.第2部分:含水量測定 |
(Methods of test for desiccants - Determination of moisture content) |
| BS 3482-3-1991 |
干燥劑試驗方法.第3部分:pH值測定 |
(Methods of test for desiccants - Determination of pH) |
| BS 3482-4-1991 |
干燥劑試驗方法.第4部分:水溶性氯化物含量的測定 |
(Methods of test for desiccants - Determination of water-soluble chlorides content) |
| BS 3482-5-1991 |
干燥劑試驗方法.第5部分:水溶性硫酸鹽含量的測定 |
(Methods of test for desiccants - Determination of water-soluble sulphates content) |
| BS 3482-6-1991 |
干燥劑試驗方法.第6部分:吸水能力的測定 |
(Methods of test for desiccants - Determination of adsorptive capacity) |
| BS 3482-7-1991 |
干燥劑試驗方法.第7部分:粒度大小的測定 |
(Methods of test for desiccants - Determination of particle size) |
| BS 3482-8-1991 |
干燥劑試驗方法.第8部分:氨和氨混合物的評定 |
(Methods of test for desiccants - Estimation of ammonia and ammonium compounds content) |
| BS 3482-9-1991 |
干燥劑試驗方法.第9部分:氯化鈷含量的測定 |
(Methods of test for desiccants - Determination of cobalt chloride content) |
| BS 3483-0-1990 |
涂料用顏料的試驗方法.一般介紹 |
(Methods for testing pigments for paints - General introduction) |
| BS 3483-A1-1983 |
涂料用顏料的試驗方法.第A1部分:顏色的比較 |
(Methods for testing pigments for paints - Comparison of colour) |
| BS 3483-A7-1994 |
涂料用顏料的試驗方法.飽和色系統中的白、黑和有色顏料的比色法 |
(Methods for testing pigments for paints - Colorimetric method for the comparison of the colours, in full-shade systems, of white, black and coloured pigments) |
| BS 3483-B3-1982 |
涂料用顏料的試驗方法.第B3部分:篩殘余物的測定(用人工水法) |
(Methods for testing pigments for paints - Determination of residue on sieve (water method, using a manual procedure)) |
| BS 3483-C3-1982 |
涂料用顏料的試驗方法.第C3部分:水萃取物的酸度和堿度的測定 |
(Methods for testing pigments for paints - Determination of acidity or alkalinity of the aqueous extract) |
| BS 3483-C7-1980 |
涂料用顏料的試驗方法.第C7部分:耐色料擴散性的比較 |
(Methods for testing pigments for paints - Comparison of resistance to bleeding) |
| BS 3483-C8-1980 |
涂料用顏料的試驗方法.第C8部分:熱穩定性的比較 |
(Methods for testing pigments for paints - Comparison of heat stability) |
| BS 3484-1-1992 |
書寫墨水.藍黑墨水的規范 |
(Record inks - Specification for blue-black inks) |
| BS 3484-2-1994 |
書寫墨水.耐久墨水的規范 |
(Record inks - Specification for permanent inks) |
| BS 3486-1-1996 |
農業用機械,工具用輪子的規格.車輪輪輞固定尺寸的規格 |
(Specification for wheels for agricultural machinery, implements and trailers - Specification for wheel-to-hub fixing dimensions) |
| BS 3487-4-1988 |
氣管.第4部分:科爾型導氣管規范 |
(Tracheal tubes - Specification for tubes of the Cole type) |
| BS 3488-1987 |
工業用無水羊毛脂規范 |
(Specification for technical anhydrous lanolin) |
| BS 3492-1987 |
包括航空燃油的石油產品的公路和鐵路油槽車用軟管及軟管總成規范 |
(Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels) |
| BS 3495-1972 |
鋁垃圾箱規范 |
(Specification for aluminium refuse storage containers) |
| BS 350-1-1974 |
換算系數和表.第1部分:表的基儲換算系數 |
(Conversion factors and tables - Basis of tables - Conversion factors) |
| BS 350-2004 |
單位的換算因數 |
|
| BS 3502-3-1993 |
塑料和橡膠材料用符號.配料成分符號一覽表 |
(Symbols for plastics and rubber materials - Schedule for symbols for compounding ingredients) |
| BS 3504-1962 |
電子管陰極用鎂活性鎳規范 |
(Specification for magnesium-activated nickel for cathodes of electronic tubes and valves) |
| BS 3506-1969 |
輕便型工業用未增塑聚氯乙烯管規范 |
(Specification for unplasticized PVC pipe for industrial uses) |
| BS 3507-1976 |
整牙用的線帶及牙科用的結扎線規范 |
(Specification - Orthodontic wire and tape and dental ligature wire) |
| BS 3509-1962 |
管形酒精水平儀規范 |
(Specification for spirit level vials) |
| BS 3510-1968 |
表示電離輻射實際存在或可能存在的基本符號規范 |
(Specification for a basic symbol to denote the actual or potential presence of ionizing radiation) |
| BS 3517-1991 |
實驗室玻璃器皿的熱沖擊試驗方法 |
(Methods for thermal shock tests on laboratory glassware) |
| BS 3518-1-1993 |
疲勞試驗方法.一般原理指南 |
(Methods of fatigue testing - Methods of fatigue testing - Guide to general principles) |
| BS 3518-2-1962 |
疲勞試驗方法.第2部分:回轉彎曲疲勞試驗 |
(Methods of fatigue testing - Rotating bending fatigue tests) |
| BS 3518-3-1963 |
疲勞試驗方法.第3部分:直接應力疲勞試驗 |
(Methods of fatigue testing - Direct stress fatigue tests) |
| BS 3520-1962 |
牙科用鍛造鍛金屬合金絲規范 |
(Specification for dental wrought precious metal alloy wire) |
| BS 3521-2-1991 |
眼鏡鏡片和眼鏡架術語.第2部分:眼鏡架術語詞匯 |
(Terms relating to ophthalmic lenses and spectacle frames - Glossary of terms relating to spectacle frames) |
| BS 3522-1962 |
外科用皮下注射針頭(流爾式針座) |
(Specification for hypodermic surgical mounted needles (Luer fitting)) |
| BS 3523-1991 |
用氯化鈷浸的粒狀干燥劑硅膠規范 |
(Specification for granular desiccant silica gel impregnated with cobalt chloride) |
| BS 3529-1962 |
內燃機用飛輪殼座墊和托架的尺寸規范 |
(Specification for dimensions of flywheel housing mounting pads and brackets for i.c. engines) |
| BS 3531-11-1991 |
骨結合術用外科植入物.第11部分:平行腳U形釘規范 |
(Implants for osteosynthesis - Implants for osteosynthesis - Specification for staples with parallel legs) |
| BS 3531-14.2-1990 |
骨接合術用外科植入物.骨髓腔內釘接物系列.髓用釘(魯施型)和插入導引器/摘取器規范 |
(Implants for osteosynthesis - Intramedullary nailing systems - Specification for medullary pins (Rush type) and introducer/extractors) |
| BS 3531-15-1992 |
骨結合術用外科植入物.第15部分:成人股骨端固定用器件規范 |
(Implants for osteosynthesis - Specification for devices for the fixation of the ends of the femur in adults) |
| BS 3531-23.1-1991 |
接骨用植入物.骨板.彎曲強度和剛度的測定方法 |
(Implants for osteosynthesis - Bone plates - Method for determination of bending strength and stiffness) |
| BS 3531-23.2-1993 |
接骨用植入物.骨板.與4.5mm、4.2mm、4.0mm、3.9mm、3.5mm和2.9mm公稱尺寸螺釘一起使用的孔和槽的規范 |
Implants for osteosynthesis - Bone plates - Specification for holes and slots for use with screws of 4,5 mm, 4,2 mm, 4,0 mm, 3,9 mm, 3,5 mm and 2,9 mm nominal sizes |
| BS 3531-23.3-1991 |
外科植入物.金屬骨板.相應于具有不對稱螺紋及球形底面的螺釘?shù)目?/td>
| (Implants for osteosynthesis - Bone plates - Specification for holes corresponding to screws with asymmetrical thread and spherical undersurfaces) |
| BS 3531-5.1-1997 |
骨接合術用外科植入物.骨螺釘和輔助裝置.六角凹頭螺釘規范 |
(Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for keys for use with screws having heads with hexagon socket) |
| BS 3531-5.2-1990 |
骨接合術用外科植入物.第5部分:骨螺釘和輔助裝置.第2節:單槽頭和十字槽頭螺釘旋具規范 |
Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for screwdrivers for screws having heads with single slot, cruciate slot or cross-recess |
| BS 3531-5.3-1991 |
外科植入物.不對稱螺紋的六角頭球面頸金屬骨螺釘.尺寸 |
Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for the dimensions of screws having hexagonal drive connection, spherical under-surfaces and asymmetrical thread |
| BS 3531-5.4-1993 |
接骨用植入物.接骨螺釘和輔助設備.有對稱和不對稱螺紋及圓錐形底面的螺釘規范 |
Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for screws having symmetrical and asymmetrical thread and conical undersurfaces |
| BS 3531-5.5-1990 |
骨接合術外科植入物.第5部分:骨螺釘和輔助裝置.第5節:絲錐和鉆頭規范 |
Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for taps and drills |
| BS 3531-5.6-1991 |
外科植入物.帶有不對稱螺紋和球形下表面的金屬接骨螺釘.機械要求和試驗方法 |
Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for the mechanical requirements and test methods for screws having asymmetrical thread and spherical undersurface |
| BS 3531-5.7-1991 |
整形外科鉆孔設備.第1部分:鉆刃,絲錐和沉頭銑刀 |
Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for drill bits, taps and countersink cutters |
| BS 3531-6.1-1990 |
骨接合術用外科植入物.第6部分:骨骼用釘和金屬絲.第1節:一般要求規范 |
(Implants for osteosynthesis - Skeletal pins and wires - Specification for general requirements) |
| BS 3531-6.2-1991 |
外科植入物.骨骼銷釘和骨架金屬絲.第2部分:斯臺因曼骨骼銷釘.尺寸 |
Implants for osteosynthesis - Skeletal pins and wires - Specification for dimensions of Steinmann skeletal pins |
| BS 3531-6.3-1994 |
接骨用植入物.骨架銷釘和骨架金屬絲.Kirschner骨架金屬絲 |
Implants for osteosynthesis - Skeletal pins and wires - Specification for Kirschner skeletal wires |
| BS 3532-1990 |
絕緣不飽和聚酯樹脂系規范的擬定 |
Method of specifying unsaturated polyester resin systems |
| BS 3533-1981 |
隔熱術語詞匯 |
Glossary of thermal insulation terms |
| BS 3537-1979 |
直徑200mm及其以下活塞銷規范 |
Specification for gudgeon pins up to 200 mm diameter |
| BS 3539-1986 |
機動車噪音測量用聲級計規范 |
Specification for sound level meters for the measurement of noise emitted by motor vehicles |
| BS 354-1995 |
積分光度計推薦標準 |
Recommendations for photometric integrators |
| BS 3544-1962 |
木材用聚乙酸乙烯酯粘劑試驗方法 |
(Methods of test for polyvinyl acetate adhesives for wood) |
| BS 3546-2001 |
生產防水滲透的布料用涂層織物 |
Coated fabrics for use in the manufacture of water penetration resistant clothing |
| BS 3547-1962 |
電熱食品輸送機及運載工具規范 |
(Specification for electrically-heated food conveyors and carriers) |
| BS 3550-1963 |
漸開線花鍵規范 |
(Specification for involute splines) |
| BS 3551-1962 |
合金鋼鎖(卸)扣規范 |
(Specification for alloy steel shackles) |
| BS 3552-1994 |
選煤術語詞匯 |
(Glossary of coal preparation terms) |
| BS 3553-1992 |
選煤廠流程圖的圖形符號規范 |
(Specification for graphical symbols for coal preparation plant flowsheets) |
| BS 3555-1988 |
環形扳手規范 |
(Specification for ring wrenches) |
| BS 3558-1-1997 |
橡膠術語的詞匯.國際術語 |
(Glossary of rubber terms - International terms) |
| BS 3558-2-2001 |
橡膠術語詞匯.添加的英語術語 |
(Glossary of rubber terms - Additional British terms) |
| BS 3564-1986 |
白云母塊、片及薄膜按尺寸分級的方法 |
(Method for size-grading of muscovite mica blocks, thins and films) |
| BS 3566-1982 |
防火設施用輕便救護罩單規范 |
(Specification for lightweight salvage sheets for fire service use) |
| BS 3567-1985 |
選煤廠設計流程圖繪制實用規程 |
(Code of practice for preparation of flowsheets for the design of coal preparation plant) |
| BS 3568-1988 |
羊毛的堿溶解度測定方法 |
(Method for determination of solubility of wool in alkali) |
| BS 357-1958 |
動力驅動的動臂式起重機(有軌低架型)規范 |
(Specification for power-driven travelling jib cranes (rail-mounted low carriage type)) |
| BS 3572-1986 |
混凝土及砌磚工程中的煙囪及其它高建筑物用攀登配件規范 |
(Specification for access fittings for chimneys and other high structures in concrete or brick work) |
| BS 3573-1990 |
聚乙烯烴絕緣銅芯通信電纜 |
(Specification for polyolefin copper-conductor telecommunication cables) |
| BS 3575-1963 |
摩擦襯墊固定用鉚釘規范 |
(Specification for rivets for the attachment of friction linings) |
| BS 3580-1964 |
螺紋強度設計思想指南 |
(Guide to design considerations on the strength of screw threads) |
| BS 3584-1990 |
羊毛在尿素亞硫酸氫鹽溶液中溶解度的測定 |
(Determination of solubility of wool in urea-bisulphite solution) |
| BS 3591-1985 |
工業用甲基醇規范 |
(Specification for industrial methylated spirits) |
| BS 3592-1-1986 |
軟管增強用鋼絲.第1部分:橡膠軟管增強用圓和扁的鍍層鋼絲規范 |
(Steel wire for hose reinforcement - Specification for coated round and flat steel wire for rubber hose reinforcement) |
| BS 3592-2-1992 |
軟管增強用鋼絲.第2部分:液壓管綁接增強用金屬鍍層鋼絲規范 |
(Steel wire for hose reinforcement - Specification for metallic coated steel wire for the bonded reinforcement of hydraulic hoses) |
| BS 3594-1-1963 |
管子扳手規范.第1部分:斯提爾遜型活動扳手 |
(Specification for pipe wrenches - Stillson type wrenches) |
| BS 3594-2-1965 |
管子扳手規范.第2部分:軌跡型扳手 |
(Specification for pipe wrenches - Footprint type wrenches) |
| BS 3597-1984 |
65/35錫/鎳合金電鍍層規范 |
(Specification for electroplated coatings of 65/35 tin/nickel alloy) |
| BS 3598-1998 |
裂變材料.運輸和加工的臨界安全.推薦標準 |
(Fissile materials - Criticality safety in handling and processing - Recommendations) |
| BS 3604-2-1991 |
承壓鋼管.具有規定高溫特性的鐵合金鋼.第2部分:縱向電弧焊接管規范 |
(Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties - Specification for longitudinally arc welded tubes) |
| BS 3605-1-1991 |
承壓無縫的和焊接的奧氏體鋼管.第1部分:無縫管規范 |
(Austenitic stainless steel pipes and tubes for pressure purposes - Specification for seamless tubes) |
| BS 3605-2-1992 |
無縫奧氏體承壓鋼管.縱向焊接管規范 |
(Austenitic stainless steel pipes and tubes for pressure purposes - Specification for longitudinally welded tubes) |
| BS 3618-1-1969 |
采掘術語詞匯.第1節:計劃和測量 |
(Glossary of mining terms - Planning and surveying) |
| BS 3618-10-1967 |
采掘術語詞匯.運輸 |
(Glossary of mining terms - Transport) |
| BS 3618-11-1967 |
采掘術語詞匯.第11節:地層控制 |
(Glossary of mining terms - Strata control) |
| BS 3618-2-1971 |
采掘術語詞匯.第2節:通風 |
(Glossary of mining terms - Ventilation) |
| BS 3618-3-1971 |
采掘術語詞匯.第3節:鉆孔和探測 |
(Glossary of mining terms - Boring and exploration) |
| BS 3618-4-1971 |
采掘術語詞匯.第4節:排水 |
(Glossary of mining terms - Drainage) |
| BS 3618-5-1971 |
采掘術語詞匯.第5節:地質學 |
(Glossary of mining terms - Geology) |
| BS 3618-6-1972 |
采掘術語詞匯.第6節:鉆探和爆破 |
(Glossary of mining terms - Drilling and blasting) |
| BS 3618-7-1973 |
采掘術語詞匯.第7節:電氣工程和照明 |
(Glossary of mining terms - Electrical engineering and lighting) |
| BS 3618-8-1974 |
采掘術語詞匯.第8節:采掘和操作 |
(Glossary of mining terms - Winning and working) |
| BS 3618-9-1974 |
采掘術語詞匯.第9節:豎井和輔助設備 |
(Glossary of mining terms - Shafts and associated equipment) |
| BS 3619-1976 |
活動灌輸架規范 |
(Specification - Mobile infusion stands) |
| BS 3621-1998 |
防盜鎖規范 |
(Specification for thief resistant locks) |
| BS 3621-2004 |
防盜鎖組件.鑰匙孔 |
|
| BS 3622-1975 |
醫院一般用途凳子和麻醉師用椅子規范 |
(Specification for general purpose stools and anaesthetists’ chairs for hospital use) |
| BS 3623-1981 |
木工用金屬車身刨規范 |
(Specification for woodworkers’ metal-bodied planes) |
| BS 3625-1963 |
粉末粒度測定用目鏡和網格分度鏡規范 |
(Specification for eyepiece and screen graticules for the determination of the particle size of powders) |
| BS 3628-1963 |
一般用軟管夾子(蝸桿傳動式)規范 |
(Specification for hose clips (worm drive type) for general purpose use) |
| BS 3630-16-1976 |
鋅和鋅合金的取樣與分析方法.第16部分:鋅合金中的鎳(光度測量法) |
(Methods for the sampling and analysis of zinc and zinc alloys - Nickel in zinc alloys (photometric method)) |
| BS 3632-1995 |
住宅停車房規范 |
(Specification for residential park homes) |
| BS 3641 Supplement-1980 |
機床用補充符號(和標志)的應用指南 |
(Guide to application of additional symbols (and index) for machine tools) |
| BS 3641-1-1971 |
機床符號.第1部分:一般符號 |
(Symbols for machine tools - General symbols) |
| BS 3641-2-1980 |
機床符號.數控符號規范 |
(Symbols for machine tools - Specification for numerical control symbols) |
| BS 3641-3-1973 |
機床符號.第3部分:增加的一般符號 |
(Specification for symbols for machine tools - Additional general symbols) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com