標準號 |
中文名稱 |
英文名稱 |
| BS EN ISP 12061-9-1995 |
信息技術.開放系統互連.國際標準化輪廓.開放系統互連分配交易進程.第9部分:支持供應商鏈式事務處理.偏振控 |
(Information technology - Open systems interconnection - International standardized profiles: OSI distributed transaction procesing - Provider supported chained transactions - Polarized control (ATP31)) |
| BS EN ISP 12062-1-1996 |
國際技術.國際標準化提問檔AMH2n.信息處理系統.人際通信.IPM MHS服務支持 |
(International technology. International Standardized Profiles AMH2n. Message Handling Systems. Interpersonal Messaging. IPM MHS Service Support) |
| BS EN ISP 12062-2-1996 |
國際標準技術.AMH2n外觀的國際標準.信息處理系統.IMH2-IPM目錄 |
(International technology. International Standardized Profiles AMH2n. Message Handling Systems. Interpersonal Messaging. AMH2-IPM Content) |
| BS EN ISP 12062-3-1996 |
國際技術.國際標準化提問檔AMH2n.信息處理系統.全球信息.IMH22-IPM的信息傳遞要求(P1) |
(International technology. International Standardized Profiles AMH2n. Message Handling Systems. Interpersonal Messaging. AMH22-IPM Requirements for Message Transfer (P1)) |
| BS EN ISP 12062-4-1996 |
國際技術.國際標準化提問檔AMH2n.信息處理系統.全球信息.MTS存取信息的AMH23-IPM要求(P3) |
(International technology. International Standardized Profiles AMH2n. Message Handling Systems. Interpersonal Messaging. AMH23-IPM Requirements for MTS Access (P3)) |
| BS EN ISP 12062-5-1996 |
國際技術.國際標準化提問檔AMH2n.信息處理系統.全球信息.增強MS存取信息的AMH24-IPM要求(P7) |
(International technology. International Standardized Profiles AMH2n. Message Handling Systems. Interpersonal Messaging. AMH24 IPM Requirements for Enhanced MS Access (P7)) |
| BS EN ISP 12064-1-1998 |
信息技術.國際標準化提問檔FOD112.開式文檔結構:圖像應用.簡單的文檔結構.光柵圖形內容結構.文檔應用界面(D |
(Information technology - International standardized profile FOD112 - Open document format: image applications - Simple document structure - Raster graphics content architecture - Document application) |
| BS EN ISP 12068-1-1997 |
信息技術.國際標準化提問檔FDI 4.目錄服務的數據定義.使用由OSI傳輸作用處理的目錄服務.第1部分:FD1 41 簡 |
(Information technology - International standardized profile FDI 4. Directory data definitions - Use of the directory for OSI TP - FDI 41 - Basic naming and addressing) |
| BS EN ISP 12068-2-1997 |
信息技術.FD4國際界面標準.目錄服務的數據定義.使用由OSI傳輸作用處理的目錄服務.第2部分:FD1 42 擴展的命 |
(Information technology - International standardized profile FDI 4. Directory data definitions - Use of the directory for OSI TP - FDI 42 - Enhanced naming and addressing) |
| BS EN ISP 12070-1-1997 |
信息技術.國際標準界面FCSnnn.ISO/IEC2022基礎上8比特代碼字符集.FCS111.2022選項1 |
(Information technology - International standardized profiles FCSnnn - Character set 8-bit code structure based on ISO/IEC 2022: FCS111 - 2022 Option 1) |
| BS EN ISP 15124-1-1999 |
信息技術.國際標準類型FOD126.開放文件格式:圖形應用.增強的文件結構.字符、光柵制圖和幾何制圖目錄結構.文 |
(Information technology - International standardized profile FOD126 - Open document format: image applications - Enhanced document structure - Character, raster graphics, and geometric graphics content) |
| BS F 125-1973 |
橡膠粘合的壓縮石棉纖維墊片規范 |
(Specification for rubber bonded compressed asbestos fibre jointing) |
| BS F 130-1987 |
航空航天用橡膠粘合的壓縮芳族聚酰胺纖維墊片規范 |
(Specification for rubber bonded compressed aramid fibre jointing material for aerospace purposes) |
| BS F 131-1986 |
航空航天用涂氯磺化聚乙烯橡膠的尼龍織物 |
(300g/m(Specification for chlorosulphonated polyethylene rubber coated nylon fabric (300 g/m) |
| BS F 133-1988 |
航空航天用經編尼龍織物規范 |
(Specification for warp knitted nylon fabric for aerospace purposes) |
| BS F 136-1989 |
航空航天用涂著色氯磺化聚乙烯橡膠的尼龍織物(190g/m**2)規范 |
(Specification for pigmented chlorosulphonated polyethylene rubber-coated nylon fabric (190 g/m) |
| BS F 137-1990 |
航空航天用透光用拋光經編棉布規范 |
(Specification for warp knitted cotton polishing and polish application cloths for aircraft transparencies) |
| BS F 138-1991 |
航空用聚酯纖維平紋(亞麻)網規范 |
(Specification for polyester plain (bobbin) netting suitable for aerospace purposes) |
| BS F 139-1989 |
航空航天用涂鋁聚氯丁橡膠的尼龍織物(350g/m**2)規范 |
(Specification for aluminized polychloroprene rubber-coated nylon fabric (350 g/mUP2) for aerospace purposes) |
| BS F 140-1991 |
降落傘術語集 |
(Glossary of parachute terms) |
| BS F 141-1992 |
航空用機織棉纖維(L28和L34)規范 |
(Specification for closely woven cotton fabrics (L28 and L34) for aerospace purposes) |
| BS F 143-1993 |
航空航天用對位芳族聚酰編織繩 |
(Specification for para-aramid braided cords for aerospace purposes) |
| BS F 151-1991 |
航空用無梭織造棉網規范 |
(Specification for shuttleless woven cotton webbing for aerospace purposes) |
| BS G 102-1971 |
旋轉電機一般要求規范 |
(Specification for general requirements for rotating electrical machinery) |
| BS G 118-1949 |
直讀航空磁羅盤規范 |
(Specification for aircraft magnetic compass, direct-reading) |
| BS G 122-1949 |
遙控讀數(陀螺穩定的)的航空磁羅盤規范 |
(Specification for aircraft magnetic compass, remote-reading (gyro-stabilized)) |
| BS G 123-1949 |
遙控讀數(非穩定的)的航空磁羅盤規范 |
(Specification for aircraft magnetic compass, remote-reading (non-stabilized)) |
| BS G 125-1950 |
航空用轉彎側傾斜指示儀規范 |
(Specification for turn and slip indicators for aircraft purposes) |
| BS G 133-1951 |
極電壓航空系統用電磁指示儀規范 |
(Specification for electro-magnetic indicators for extra low voltage aircraft systems) |
| BS G 142-1953 |
航空超低電壓直流系統用重負載電磁驅動的單極斷路器規范 |
(Specification for heavy duty, electro-magnetically operated, single-pole circuit-breakers for extra-low voltage d.c. systems in aircraft) |
| BS G 152-1956 |
航空用交流電操作人工地平儀規范 |
(Specification for a.c. electrically-operated artificial horizons for aircraft) |
| BS G 174-1959 |
航空用二次供電用換流器 |
(Invertors for secondary electrical supplies for aircraft) |
| BS G 175-1959 |
航空燃油嘴接地插頭和插座 |
(Aircraft fuel nozzle grounding plugs and sockets) |
| BS G 176-1-1960 |
航空用管狀熔絲規范.第1部分:一般要求 |
(Specification for cartridge fuses for aircraft - General requirements) |
| BS G 176-2-1960 |
航空用管狀熔絲規范.第2部分:管形熔絲和熔斷片(A型) |
(Specification for cartridge fuses for aircraft - Cartridge fuses and fuse-links (Type A)) |
| BS G 176-3-1961 |
航空用管狀熔絲規范.第3部分:管狀熔斷片(B型) |
(Specification for cartridge fuses for aircraft - Cartridge fuse-links (Type B)) |
| BS G 176-4-1962 |
航空用管狀熔絲規范.第4部分:管狀熔斷片(C型) |
(Specification for cartridge fuses for aircraft - Cartridge fuse-links (Type C)) |
| BS G 176-5-1966 |
航空用管狀熔絲規范.第5部分:管狀熔斷片(D型) |
(Specification for cartridge fuses for aircraft - Cartridge fuse-links (Type D)) |
| BS G 177-1961 |
航空用Nyvin 型電纜規范 |
(Specification for Nyvin type electrical cables for aircraft) |
| BS G 183-1963 |
飛行器中模擬數據傳輸系統相互連接規范 |
(Specification for interconnections in analogue data transmission systems in aircraft) |
| BS G 184 to G 188-1964 |
六角形壓合飛行器鋁制電纜用鋁接線板端和線內連接器規范 |
(Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables) |
| BS G 189-1964 |
航空用Tersil型電纜規范 |
(Specification for Tersil type electrical cables for aircraft) |
| BS G 190-1964 |
航空用座艙高度表規范 |
(Specification for cabin altimeters for aircraft) |
| BS G 192-1965 |
航空用銅導線的Efglas型電纜規范 |
(Specification for Efglas type electric cables with copper conductors for aircraft) |
| BS G 193-1966 |
飛行器燈座規范 |
(Specification for aircraft lampholders) |
| BS G 195-1966 |
飛行器用Minyvin型電纜規范 |
(Specification for Minyvin type electric cables for aircraft) |
| BS G 198-5-1997 |
航空電纜和設備電線用套.熱收縮模型規范 |
(Sleeves for aircraft electric cables and equipment wires - Specification for heat shrinkable moulded shapes) |
| BS G 203-1967 |
帶系緊襯片和鎖緊墊圈的統一螺釘規范 |
(Specification for Unified screws with captive facing and locking washers) |
| BS G 207-1969 |
飛行器電氣線路圖規范 |
(Specification for aircraft electrical circuit diagrams) |
| BS G 208-1970 |
額定值達到10A的電氣繼電器一般要求規范 |
(Specification for general requirements for electrical relays up to 10 A rating) |
| BS G 209-1970 |
變壓整流部件規范 |
(Specification for transformer rectifier units) |
| BS G 211-1971 |
銅導線的Fepsil型電纜規范 |
(Specification for reflection-reducing coating of instrument windows and lighting wedges) |
| BS G 212-1971 |
聲學.測量由計算機和辦公裝置發出的高頻噪聲 |
(Specification for general requirements for aircraft electrical cables) |
| BS G 217-1975 |
座艙照明控制器的一般要求規范 |
(Specification for general requirements for cockpit lighting controllers) |
| BS G 222-1976 |
Efglas型電纜規范(米制部件) |
Specification for Efglas type electric cables (metric units) |
| BS G 224-1978 |
航空用杠桿式的手控開關規范 |
Specification for lever-operated manual switches for aircraft |
| BS G 225-1979 |
帶可移動壓合型觸點的耐環境影響的終端連接組件的性能規范 |
Specification for performance of environment-resistant terminal junction modules with removable crimp-type contacts |
| BS G 226-1979 |
計數器和指針式伺服型壓力高度計系統規范 |
Specification for counter and pointer, servo type, pressure altimeter systems |
| BS G 227-1979 |
Tersil型電纜規范(米制件) |
Specification for Tersil type electric cables (metric units) |
| BS G 228-1981 |
飛行器用兩極和四極密封的2A和3A電磁繼電器的間隙和固定尺寸規范 |
Specification for clearance and fixing dimensions for 2 A and 3 A, two- and four-pole sealed electromagnetic relays for aircraft |
| BS G 234-1984 |
飛行器上使用的自調式氣流角度發射機規范 |
Specification for self-aligning air flow angle transmitters for use on aircraft |
| BS G 235-1987 |
一般機體或設備連接用帶鍍銀導體的150℃捆扎絕緣電纜規范 |
Specification for electric cables for general airframe or equipment interconnect use (150 鳦), wrapped insulation with silver plated conductors |
| BS G 236-1987 |
一般機體或設備連接用帶鍍鎳導體的200℃捆扎絕緣電纜規范 |
Specification for electric cables for general airframe or equipment interconnect use (200 鳦), wrapped insulation with nickel plated conductors |
| BS G 237-1987 |
一般機體或設備連接用帶鍍鎳導體的200℃擠制絕緣電纜規范 |
Specification for electric cables for general airframe or equipment interconnect use (200 鳦), extruded insulation with nickel plated conductors |
| BS G 240-1988 |
飛行器用壓力傳感器規范 |
Specification for pressure transducers for use on aircraft |
| BS G 241-1988 |
發動機防火區和機體用耐火電纜規范 |
Specification for fire proof electric cables for engine fire zone and airframe use |
| BS G 242-1989 |
數據總線連接系統規范 |
Specification for data bus interconnecting systems |
| BS G 243-1990 |
發動機用點火電纜規范(4kV直流) |
Specification for igniter cables for engine use (4 kV d.c.) |
| BS G 244-1989 |
飛行器電連接系統裝配/檢修實用規程 |
Code of practice for installation/repair of aircraft electrical interconnection systems |
| BS G 246-1991 |
在控制拉力下飛行器電纜上用電纜帶規范 |
Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses |
| BS G 247-1-1992 |
飛行器定位燈.救生衣燈規范 |
Locator lights for airborne applications - Specification for lifejacket lights |
| BS G 247-2-1995 |
航空用定位燈.救生筏燈規范 |
Locator lights for airborne applications - Specification for liferaft lights |
| BS G 248-1993 |
混合遠程功率控制器規范.一般要求 |
Specification for hybrid remote power controllers - General requirements |
| BS G 249-1993 |
固態遙控功率控制器通用要求 |
(Specification for solid-state remote power controllers - General requirements) |
| BS G 250-1994 |
電纜的識別標記規范 |
(Specification for identification marking of electric cables) |
| BS G 253-1995 |
一型終端連接系統規范 |
(Specification for type 1 terminal junction systems) |
| BS G 254-1994 |
2型終端連接系統規范 |
Specification for type 2 terminal junction systems |
| BS G 255-1994 |
3型終端連接系統規范 |
Specification for type 3 terminal junction systems |
| BS G 256-1995 |
4型終端連接系統規范 |
Specification for type 4 terminal junction systems |
| BS G 257-1-1998 |
民用飛行器的電磁危害防護設計.理論及危害性導則 |
Design of electromagnetic hazard protection of civil aircraft - Guide to theory and threats |
| BS G 257-2-1998 |
民用飛行器的電磁危害防護設計.防護導則 |
Design of electromagnetic hazard protection of civil aircraft - Guide to protection |
| BS G 257-3-2004 |
民用飛行器的電磁危害防護設計.間隙和檢驗指南 |
|
| BS G 258-1995 |
電纜和電纜線術語匯編 |
Glossary of terms for electrical cables and cable harnesses |
| BS G 259-1996 |
飛行器設備.空運設備所需環境和操作條件.濕度、溫度和壓力試驗 |
(Aircraft equipment - Environmental and operating conditions for airborne equipment - Humidity, temperature and pressure tests) |
| BS G 260-1996 |
飛行器設備的環境試驗.靜態加速度 |
Environmental tests for aircraft equipment - Steady-state acceleration |
| BS G 261-1-1996 |
小型飛機規范.電磁繼電器和接觸器.第1部分:一般要求 |
Specification for aircraft - Electromagnetic relays and contactors - General requirements |
| BS G 262-1998 |
空間飛行器.空間飛行器設備的設計和性能說明.標準型 |
Aircraft - Declaration of design and performance for aircraft equipment - Standard form |
| BS G 264-2005 |
航空航天系列.航空電子數據傳輸接口系統規范.輔助總線 |
|
| BS HC 1-1973 |
碳素鋼鑄件(500N/mm**2)規范 |
Specification for carbon steel castings (500 N/mm) |
| BS HC 10-1974 |
鎳-鉻-鉬-鋼鑄件(1150-1300MPa)規范 |
Specification for nickel-chromium-molybdenum steel castings (1150-1300 MPa) |
| BS HC 100-1972 |
鐵、鎳、銅、鈷和難熔金屬基合金鑄件的檢驗和試驗程序 |
Inspection and testing procedure for iron, nickel, copper, cobalt and refractory metal base alloy castings |
| BS HC 103-1974 |
23%鉻-鎳-鎢耐腐蝕鋼鑄件(鉻23、鎳11、鎢3)規范 |
Specification for 23% chromium-nickel-tungsten corrosion-resisting steel castings (Cr 23, Ni 11, W 3) |
| BS HC 104-1974 |
19%鉻-10%鎳鈮穩定的耐腐蝕鋼鑄件(460MPa)規范 |
Specification for 19% chromium-10% nickel niobium-stabilized corrosion-resisting steel castings (460 MPa) |
| BS HC 105-1974 |
18%鉻-11%鎳-2.5%鉬鈮穩定的耐腐蝕鋼鑄件(500MPa)規范 |
Specification for 18% chromium-11% nickel-2.5% molybdenum niobium-stabilized corrosion-resisting steel castings (500 MPa) |
| BS HC 106-1974 |
沉淀硬化鉻-鎳-銅耐腐蝕鋼鑄件(1250-1500MPa)(鉻16、鎳4、銅3)規范 |
Specification for precipitaton hardening chromium-nickel-copper corrosion-resisting steel castings (1250-1500 MPa) (Cr 16, Ni 4, Cu 3) |
| BS HC 2-1973 |
碳錳鋼鑄件(550N/mm**2)規范 |
(Specification for carbon-manganese steel castings (550 N/mm) |
| BS HC 202-1973 |
沉淀硬化鎳基鉻-鈮-鉬-鐵-鎢合金鑄件規范(鉻20.0、鈮6.6、鉬6.0、鐵3.0、鎢2.5) |
Specification for precipitation hardening nickel base chromium-niobium-molybdenum-iron-tungsten alloy castings (Cr 20.0, Nb 6.6, Mo 6.0, Fe 3.0, W 2.5) |
| BS HC 205-1974 |
沉淀硬化鎳基鉻-鈷-鉬-鈦合金鑄件規范(鉻20、鈷20、鉬6、鈦2 |
Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy castings (Cr 20, Co 20, Mo 6, Ti 2) |
| BS HC 206-1975 |
沉淀硬化鎳基鉻-鈷-鉬-鈦合金精密鑄件規范(鉻20、鈷20、鉬6、鈦2) |
Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy precision castings (Cr 20, Co 20, Mo 6, Ti 2) |
| BS HC 3-1973 |
1%鉻鉬低合金鋼鑄件(700N/mm**2)規范 |
Specification for 1% chromium-molybdenum low alloy steel castings (700 N/mm) |
| BS HC 301-1973 |
鈷基鉻-鎳-鎢合金鑄件規范(鉻25.5、鎳10.5、鎢7.5) |
Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5) |
| BS HC 4-1973 |
3%鉻鉬鋼鑄件(620-770N/mm**2)規范 |
Specification for 3% chromium-molybdenum steel castings (620-770 N/mm) |
| BS HC 401-1974 |
18%鎳馬氏體時效處理鋼精密鑄件規范(1600-1850MPa) |
Specification for 18% nickel maraging steel precision castings (1600-1850 MPa) |
| BS HC 402-1976 |
鑄鐵圓筒形件規范(離心鑄造)(適用于直徑小于和等于200mm的活塞環) |
Specification for cast iron ring pots (centrifugally cast) (suitable for piston rings up to 200 mm in diameter) |
| BS HC 403-1976 |
高鉻合金鑄件鐵圓筒形件規范(離心鑄造)(適用于直徑小于和等于400mm的活塞環) |
Specification for high chromium alloy cast iron ring pots (centrifugally cast) (suitable for piston rings up to 400 mm in diameter) |
| BS HC 404-1976 |
鉻-鉬合金鑄件鐵圓筒形件(適用于離心鑄造和砂型鑄造密封環、活塞環和汽缸套筒) |
Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners) |
| BS HC 5-1973 |
3%鎳表面淬火鋼鑄件(700N/mm**2)規范 |
Specification for 3% nickel case hardening steel castings (700 N/mm) |
| BS HC 502-1981 |
銅基鋁-鎳-鐵合金鑄件規范(620MPa)(鋁9.5、鎳5、鐵5) |
Specification for copper base aluminium-nickel-iron alloy castings (620 MPa) (Al 9.5, Ni 5, Fe 5) |
| BS HC 6-1973 |
3%鉻鉬滲氮鋼鑄件(850-1000N/mm**2)規范 |
Specification for 3% chromium-molybdenum nitriding steel castings (850-1000 N/mm) |
| BS HC 7-1974 |
3%鉻鉬鋼鑄件(880-1080MPa)規范 |
Specification for 3% chromium-molybdenum steel castings (880-1080 MPa) |
| BS HC 8-1974 |
3%鉻鉬鋼鑄件(1150-1300MPa)規范 |
Specification for 3% chromium-molybdenum steel castings (1150-1300 MPa) |
| BS HC 9-1974 |
鎳-鉻-鉬-鋼鑄件(880-1080MPa)規范 |
Specification for nickel-chromium-molybdenum steel castings (880-1080 MPa) |
| BS HR 10-1972 |
鎳-鈷-鉻-鉬-鈦-鋁耐合金坯錠、棒材、鍛件和部件(鎳基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)規范 |
Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
| BS HR 203-1972 |
鎳-鉻-鈦耐熱合金薄板材、薄板材和帶材(鎳基、Cr19.5、Ti0.4)規范 |
Specification for nickel-chromium-titanium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 0.4) |
| BS HR 204-1972 |
鎳-鉻-鐵-鉬-鈷-鎢耐熱合金板材,薄板材和帶材(鎳基、Cr22、Fe18.5、Mo9、Co1.5、W0.6)規范 |
Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
| BS HR 205-1989 |
鎳銅合金薄板材和帶材:退火的(鎳基、Cu31)規范 |
Nickel-copper alloy sheet and strip: annealed (Nickel base, Cu 31) |
| BS HR 206-1973 |
鎳-鈷-鉻-鉬-鈦-鋁耐熱合金板材、薄板材和帶材(鎳基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)規范 |
Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
| BS HR 207-1973 |
鎳-鐵-鉻-鉬-鋁-鈦耐熱合金板材、薄板材和帶材(Ni/Co43.5、Cr16.5、Mo3.3、Al1.2、Ti1.2、Fe余量)規范 |
Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder) |
| BS HR 208-1989 |
鎳鉻鐵合金薄板材、帶材和板材規范:退火的(鎳基、Cr15.5、Fe8) |
Specification for nickel-chromium-iron alloy sheet, strip and plate: annealed (Nickel base, Cr 15.5, Fe 8) |
| BS HR 209-1989 |
鎳-鉻-鈷-鉬-鈦-鋁耐熱合金薄板材、帶材和板材:軟化的(鎳基、Cr18、Co14、 Mo7、Ti2.2、Al2.1)規范 |
Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting alloy sheet, strip and plate: softened (nickel base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com