ANSI——美國國家標準學會翻譯目錄查詢

咨詢熱線：010-6973-5438

標準號	中文名稱	英文名稱
ANSI (NFPA)T 2.25.1 R 2-2005	氣壓傳動.工業機械的系統標準.對ISO 4414-1998的補充.氣壓傳動.與系統相關的一般規則
ANSI 1-1990	小型鍋爐的測試程序	Mini-Rail Boiler Testing Procedure
ANSI 13-1988	盒式錄像磁帶.2英寸四路磁帶(SMPTE)	Video Recording-Cartridge Spools - 2-in Quadruplex Tape (SMPTE)
ANSI 5609-2004	可轉位刀片用鏜桿.尺寸
ANSI 5609-2004	可轉位刀片用鏜桿.尺寸	(Boring bars for indexable inserts - Dimensions )
ANSI A 10.12-1998	挖掘的安全要求	Safety Requirements for Excavation
ANSI A 10.13-2001	鋼結構構件的安全要求	Safety Requirements for Steel Erection
ANSI A 10.15-1995	建造和拆除操作.挖溝的安全要求	Construction and Demolition Operations - Dredging, Safety Requirements for
ANSI A 10.16-1995	建造和拆除操作.豎井,隧道,藻井的安全要求	Construction and Demolition Operations - Safety Requirements for Tunnels, Shafts, and Caissons
ANSI A 10.17-1997	熱混合瀝青建筑的安全操作規程	Safe Operating Practices for Hot Mix Asphalt (HMA) Construction
ANSI A 10.18-1996	建造和拆除操作.臨時地板孔墻開孔和樓梯口及其他無保護邊界的安全要求	Construction and Demolition Operations - Safety Requirements for Temporary Floor Holes, Wall Openings, Stairways and Other Unprotected Edges
ANSI A 10.31-1995	建造和拆除操作.挖掘起重機的安全要求,定義和規范	Construction and Demolition Operations - Safety Requirements, Definitions, and Specifications for Digger Derricks
ANSI A 10.34-2001	施工現場及其鄰近的公眾的保護	Protection of the Public on and Adjacent to Construction Sites
ANSI A 10.37-1996	建造和拆除操作.在建造和拆除操作中的砂礫系統	Construction and Demolition Operations - Debris Net Systems Used During Construction and Demolition Operations
ANSI A 10.39-1996	健康審核程序的結構安全	Construction Safety and Health Audit Program
ANSI A 10.42-2000	建筑企業的施工資格和責任	Rigging Qualifications and Responsibilities in the Construction Industry
ANSI A 10.7-1998	建造和拆除.商業用爆炸和炸藥.運輸,儲存,處理和使用的安全要求	Construction and Demolition - Commercial Explosives and Blasting Agents - Safety Requirements for Transportation, Storage, Handling and Use
ANSI A 10.9-1997	建造和拆除操作.混凝土和磚石工程	Construction and Demolition Operations - Concrete and Masonry Work
ANSI A 108.10-1992	灰漿固定規范	Specifications for Installation of Grout in Tilework (included in ANSI A108.1-1992)
ANSI A 108.11-1992	粘結性襯墊部件的內部裝修規范	Specifications for Inior Installations of Cementitious Backer Units (included in ANSI A108.1-1992)
ANSI A 108.1a-1992	用波特蘭水泥灰漿用濕固定法安裝陶瓷磚的規范	Specifications for Installation of Ceramic Tile in the Wet-Set Method, with Portland Cement Mortar (included in ANSI A108.1-1992)
ANSI A 108.1b-1992	用干的或漬漿的波特蘭水泥灰漿在彎曲的波特蘭水泥灰漿凝固床上安裝陶瓷磚的規范	Specifications for Installation of Ceramic Tile on a Cured Portland Cement Mortar Setting Bed with Dry-Set or Latex Portland Cement Mortar (included in ANSI A108.1-1992)
ANSI A 108.1c-1992	簽訂合同者的選擇規范.用干的或漬漿的波特蘭水泥灰漿在彎曲的波特蘭水泥灰漿床上安裝陶瓷磚或用波特蘭混凝土灰漿用濕固定方法安裝陶瓷磚
ANSI A 108.4-1992	用有機粘結劑或水可清洗的環氧樹脂陶瓷磚粘結劑的陶瓷磚的安裝規范	Specifications for Installation of Ceramic Tile with Organic Adhesives or Water Cleanable Tile Setting Epoxy Adhesive (included in ANSI A108.1-1992)
ANSI A 108.5-1992	用干固定的波特蘭水泥灰漿或漬漿的波特蘭水泥灰漿的陶瓷磚的安裝規范	Specifications for Installation of Ceramic Tile with Dry-Set Portland Cement Mortar or Latex Portland Cement Mortar (included in ANSI A108.1-1992)
ANSI A 108.6-1992	用耐化學藥品的水可清洗釉面磚粘結的和環氧樹脂的陶瓷磁磚安裝規范	Specifications for Installation of Ceramic Tile with Tile with Chemical Resistant, Water Cleanable Tile Setting and Grouting Epoxy (included in ANSI A108.1-1992)
ANSI A 108.8-1992	用耐化學藥品的灰漿和灌漿安裝陶瓷磚的規范	Specifications for Installation of Ceramic Tile with Chemical Resistant Furan Mortar and Grout (included in ANSI A108.1-1992)
ANSI A 108.9-1992	用改良的樹脂乳化的灰漿和灌漿的陶瓷磚的安裝規范	Specifications for Installation of Ceramic Tile with Modified Epoxy Emulsion Mortar/Grout (included in ANSI A108.1-1992)
ANSI A 118.1-1992	干固定的波特蘭水泥灰漿規范	Specifications for Dry-Set Portland Cement Mortar (included in ANSI A108.1-1992)
ANSI A 118.2-1992	導電的干固定的波特蘭水泥灰漿規范	Specifications for Conductive Dry-Set Portland Cement Mortar (included in ANSI A108.1-1992)
ANSI A 118.3-1992	耐化學藥品的水可清洗的磁磚安裝和灌漿環氧樹脂和水可清洗的固定磁磚粘結劑規范	Specifications for Chemical Resistant, Water Cleanable Tile-Setting and Grouting Epoxy and Water Cleanable Tile Setting Epoxy Adhesive (included in ANSI A108.1-1992)
ANSI A 118.4-1992	浸漿波特蘭水泥灰漿規范	Specifications for Latex Portland Cement Mortar (included in ANSI A108.1-1992)
ANSI A 118.5-1992	磁磚安裝用耐化學藥品的樹脂灰漿規范	Specifications for Chemical Resistant Furan Resin Mortars and Grouts for Tile Installation (included in ANSI A108.1-1992)
ANSI A 118.6-1992	陶瓷磚灌漿規范	Specifications for Ceramic Tile Grouts (included in ANSI A108.1-1992)
ANSI A 118.8-1992	改良環氧樹脂乳化灰漿灌漿規范	Specifications for Modified Epoxy Emulsion Mortar Grout (included in ANSI A108.1-1992)
ANSI A 118.9-1992	粘結性襯墊部件的規范	Specifications for Cementitious Backer Units (included in ANSI A108.1-1992)
ANSI A 119.2-1996	娛樂車輛	Recreational Vehicles
ANSI A 119.4-1996	娛樂車輛的停車和停放場地	Recreational Vehicle Parks and Campgrounds
ANSI A 119.5-1998	停車拖車	Park Trailers
ANSI A 1264.2-2001	行走/工作表面的耐滑性裝置	Provision of Slip Resistance on Walking/Working Surfaces
ANSI A 136.1-1992	陶瓷磚安裝用有機粘結劑規范	Organic Adhesives for Installation of Ceramic Tile (included in ANSI A108.1-1992)
ANSI A 250.11-2001	推薦的鋼機架建造方法	Recommended Erection Instructions for Steel Frames
ANSI A 250.6-1997	標準鋼門五金	Hardware on Standard Steel Doors (Reinforcement-Application)
ANSI A 250.7-1997	鋼門和鋼門框架的命名	Nomenclature for Steel Doors and Steel Door Frames
ANSI A 92.2-2001	車載高架旋轉架空裝置	Vehicle-Mounted Elevating and Rotating Aerial Devices
ANSI A10.10-1990	建筑業用的臨時及便攜式采暖器件和設備的安全要求	Safety requirements for temporary and portable space heating devices and equipment used in the construction industry
ANSI A10.11-1989	修建和拆除工作期間用的安全網	Construction and Demolition Operations - Personnel and Debris Nets
ANSI A10.14-1991	供建筑和拆除工作用安全帶、裝具、繩索、救生索的要求	Construction and demolition operations - Requirements for safety belts, harnesses, lanyards and lifelines for constrution and demolition use
ANSI A10.20-1988	修建和拆除的瓷磚、水磨石和大理石作業時的安全要求	Construction and Demolition - Ceramic Tile, Terrazzo and Marble Work - Safety Requirements
ANSI A10.28-1990	懸吊在起重機或轉臂起重機上的工作平臺安全要求	Safety requirements for work platforms suspended from cranes or derricks for construction and demolition operations
ANSI A10.3-1995	修建和拆除工作中用的炸藥驅動緊固系統的安全要求	Construction and demolition operations - Safety requirements for powder-actuated fastening systems
ANSI A10.32-2004	建設和拆毀工作中防人員跌落的安全要求
ANSI A10.33-1992	多個建筑和拆除工程中的安全、衛生方面的要求	Construction and demolition operations - Safety and health programm - Requirements for multi-employer projects
ANSI A10.4-2004	載人升降機和雇員用電梯的安全要求
ANSI A10.5-1992	運料用升降機的安全要求	Safety requirements for material hoists
ANSI A10.6-1990	拆除工程的安全要求	Safety requirements for demolition operations
ANSI A10.8-1988	修建和拆除工作用的腳手架的安全要求	Construction and Demolition Operations - Scaffolding - Safety Requirements
ANSI A108.1 Reihe-1992	瓷磚鋪設的規范	Specifications for the installation of ceramic tile
ANSI A112.14.1-1975	回水閥	Backwater valves
ANSI A112.19.5-1979	廁所水浮筒、水箱及小便池的修整	Trim for water-closet bowls, tanks, and urinals (dimensional standards)
ANSI A118.10-1993	薄狀瓷磚和規格石料安裝中的載面、粘接、防水層	Load bearing, bonded, waterproof membranes for thin-set ceramic tile and dimension stone installations
ANSI A119.2-2002	娛樂車輛	(Recreational Vehicles )
ANSI A119.5-2005	公園掛車
ANSI A1264.1-1995	樓板、墻壁開口及非居住區的樓梯、圍欄類的安全要求	Safety requirements for workplace floor and wall openings, stairs and railing systems
ANSI A135.4-2004	基本的硬質纖維板
ANSI A135.5-2004	預制硬質纖維板嵌板
ANSI A14.3-1992	固定式梯子的安全要求	Ladders - Fixed - Safety requirements
ANSI A14.3-2002	固定梯子的安全要求	(Ladders - Fixed - Safety Requirements )
ANSI A14.4-1992	工地用木梯的安全要求	Safety Requirements for Job-Made Wooden Ladders
ANSI A14.9-2004	吊裝暗式爬高系統的安全要求
ANSI A161.2-1979	高壓層壓案臺板的性能標準	Performance standards for fabricated high pressure decorative laminate countertops
ANSI A208.2-1994	室內用中密度纖維板	Medium density fiberboard (MDF)
ANSI A224.1-1990	鋼門和門框涂底漆前的鋼板表面的試驗程序和驗收條件	Test procedure and acceptance criteria for prime painted steel surfaces for steel doors and frames
ANSI A250.13-2003	擺動式門組件用防大風暴部件的檢驗和額定值	(Testing and Rating of Severe Windstorm Resistant Components for Swinging Door Assemblies )
ANSI A250.2-1984	隔熱鋼門系統的術語	Nomenclature for insulated steel door systems
ANSI A250.4-1994	鋼門和金屬附件的耐久性的試驗程序和驗收標準	Test procedure and acceptance criteria for physical endurance for steel doors and hardware reinforcings
ANSI A250.5-1994	鋼門、門框和吊鉤的加速物理耐久性試驗程序	Accelerated physical endurance test procedure for steel doors, frames and frame anchors
ANSI A250.6-2003	標準鋼制門五金件(增強型)	(Hardware on Standard Steel Doors (Reinforcement-Application) )
ANSI A250.8-2003	標準鋼門和門框的推薦性規范	(Recommended Specifications for Standard Steel Doors and Frames )
ANSI A300 Part 2-2004	樹木護理操作.樹木、灌木和其它木類植物的維護.標準規程.第2部分:施肥
ANSI A300 Part 4-2002	樹木管理培植.樹、灌木和其他樹木維護.樹的防電擊設備	(Tree Care Operations - Tree, Shrub and Other Woody Plant Maintenance: Standard Practices - Part 4 - Lightning Protection Installation for Trees )
ANSI A300 Part 5-2005	樹木護理操作.喬木、灌木和其他木類植物的養護.標準操作規程(場地規劃、開發和施工操作過程中對喬木和灌木的管理)
ANSI A300 Part 6-2005	樹木維護用操作.喬木、灌木和其他木本植物的維護.標準實施規程(移栽)
ANSI A300-1995	樹木防護.樹、灌木和其它木本植物的防護.標準規程	Tree care operations - Tree, shrub and other woody plant maintenance - Standard practices
ANSI ATIS0100001-2004	ETS用戶平面安全指南和要求
ANSI ATIS0152100-2005	與ITU-T建議G.711一起使用的包丟失隱蔽
ANSI ATIS0300002-2005	POTS服務試驗用XML圖解界面
ANSI ATIS0300003-2005	缺陷管理用XML圖解界面(故障管理)
ANSI ATIS0300202.a-2005	互連網操作.闡明5.3節呼叫優先策略的災害狀況下公共通信網絡的網絡管理指南
ANSI ATIS0300276.a-2005	操作、管理、維護和保障.公共通信網絡的安全要求:作為阻止有害通信的包過濾附加要求的管理平面用安全要求基線
ANSI ATIS0322000-2005	信息交換用通信業制造商、供應商和相關服務公司的表示
ANSI ATIS0325300-2005	信息交換用定位實體的識別
ANSI ATIS0326600-2005	電信.信息交換.用于北美電信系統的電信電路的識別用結構
ANSI ATIS0326900-2005	電信.信息交換.用于北美電信系統的追蹤信息格式的結構和表示
ANSI ATIS0610700a-2005	數字分級.格式規范(虛擬連接和LCAS)
ANSI ATIS0700004-2005	大容量-空分多路存取(HC-SDMA)
ANSI ATIS1000006-2005	信令系統No.7(SS7).應急電信服務(ETS)
ANSI ATIS1000111-2005	信令系統No.7(SS7).信息傳輸部分(MTP)
ANSI ATIS1000112-2005	信令系統No.7(SS7).信令連接控制部分(SCCP)
ANSI ATIS1000113-2005	信令系統No.7(SS7).綜合業務數字網絡(ISDN)用戶部分
ANSI ATIS1000631-2005	信令系統No.7(SS7).高完成概率(HPC)網絡容量
ANSI B 11.3-2002	動力彎板機.制造、維修和使用安全要求	Power Press Brakes, Safety Requirements for the Construction, Care, and Use of
ANSI B 16.18-2001	鑄銅合金釬料接頭壓力配件	Cast Copper Alloy Solder Joint Pressure Fittings
ANSI B 18.16.3M-1982	普通轉矩式米制六角螺母和六角法蘭螺母的尺寸要求	Nuts and Hex Flange Nuts, Dimensional Requirements for Prevailing-Torque-Type Steel Metric Hex
ANSI B 5.11-1964	多軸鉆頭用軸頭和可調接頭	Spindle Noses and Adjustable Adapters for Multiple Spindle Drilling Heads
ANSI B 5.43-1977	組合機床標準	Modular Machine Tool Standards
ANSI B 65.1-1995	安全標準.印刷機系統	Safety Standard - Printing Press Systems
ANSI B 74.16-1995	檢驗金剛石磨料粒度的尺寸	Checking the Size of Diamond Abrasive Grain
ANSI B 74.18-1996	涂有磨料的某種磨料粒度的等級	Grading of Certain Abrasive Grain on Coated Abrasive Material
ANSI B 74.23-1999	鉆石立方體的硼氮磨料的相對晶體強度的測量	Measuring the Relative Crystal Strengths of a Diamond Cubic Boron Nitride Grits
ANSI B 92.1-1996	漸開線花鍵及其檢驗.英制	Involute Splines and Inspection, Inch Version
ANSI B 93.10M-1969	方頭液動滾筒的靜壓力額定值法	Static Pressure Rating Methods of Square Head Fluid Power Cylinders
ANSI B 93.35M-1978	液動專用裝置的空腔尺寸(英制)	Fluid Power Exclusion Devices (Inch Series), Cavity Dimensions for
ANSI B 93.36M-1973	浮動式金屬和非金屬液壓活塞環槽的尺寸	Floating Type Metallic and Non-Metallic Fluid Power Piston Rings, Groove Dimensions for
ANSI B 94.3-1965	車床和螺旋機械的直的切削片	Straight Cut-Off Blades for Lathes and Screw Machines
ANSI B 94.8-1967	插入式刀形銑刀體	Inserted Blade Milling Cutter Bodies
ANSI B11 TR 1-1993	機床的設計、安裝和使用的人機工程導則	Ergonomic guidelines for the design, installation and use of machine tools
ANSI B11.1-1988	機床.機械動力壓力機的制造、維護和使用的安全要求	Machine Tools - Mechanical Power Presses - Safety Requirements for Construction, Care and Use
ANSI B11.10-1990	機床.金屬鋸床的制造、維護和使用的安全要求	Machine Tools - Metal Sawing Machines - Safety Requirements for Construction, Care and Use
ANSI B11.10-2003	金屬鋸床的制造、維護和使用的安全要求	(Metal Sawing Machines, Safety Requirements for Construction, Care, and Use of )

[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102]

寬天下翻譯公司版權所有 2008