標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM E 1740-2001 |
用錐形量熱計測定墻面覆層材料的熱釋放率及其它著火試驗響應特性的試驗方法 |
Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter |
| ANSI/ASTM E 1742-1996 |
放射照相檢驗實用規程 |
Practice for Radiographic Examination |
| ANSI/ASTM E 1753-2002 |
干漆膜中鉛含量檢測用現場定性化學試驗整套工具的操作規程 |
Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films (04.11) |
| ANSI/ASTM E 1762-1997 |
醫療保健信息的電子鑒定用規范 |
Specification for Electronic Authentication of Health Care Information |
| ANSI/ASTM E 1769-1996 |
電子醫療記錄和記錄系統特性的指南 |
Guide for Properties of Electronic Health Records and Record Systems |
| ANSI/ASTM E 1774-1996 |
電磁聲學傳感器指南 |
Guide to Electromagnetic Acoustic Transducers (Emats) |
| ANSI/ASTM E 1775-2001 |
對鉛的現場提取和用現場便攜式電子化學或光度分光儀分析的工作的評價指南 |
Guide for Evaluating the Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
| ANSI/ASTM E 1776-2001 |
對鉛的現場提取和用現場便攜式電子化學或光度分光儀分析的工作的評價指南(04.07) |
Guide for Evaluating the Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead (04.07) |
| ANSI/ASTM E 1779-1997 |
進行室外燥聲測量用測量方案的擬定指南 |
Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements |
| ANSI/ASTM E 1780-1997 |
戶外附近固定聲源的聲音接收性測量指南 |
Guide for Measuring Outdoor Sound Received From a Nearby Fixed Source |
| ANSI/ASTM E 1792-2002 |
表層灰土中擦取鉛取樣材料的規范 |
Specification for Wipe Sampling Materials for Lead In Surface Dust (04.11) |
| ANSI/ASTM E 1795-1996 |
建筑物含鉛漆用液體涂層封裝產品規范 |
Specification for Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ANSI/ASTM E 1796-1996 |
建筑物含鉛漆用液體涂層封裝產品的選擇和使用指南 |
Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ANSI/ASTM E 1797-1996 |
建筑物含鉛漆用增強的液體涂層封裝產品規范 |
Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ANSI/ASTM E 18-2002 |
金屬材料的洛氏硬度和表面洛氏硬度的測試方法 |
Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials |
| ANSI/ASTM E 1802-2002 |
光伏模塊潮濕絕緣綜合試驗的試驗方法 |
Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules |
| ANSI/ASTM E 1807-2001 |
金屬連接板及其相關的術語定義(04.11) |
Definitions of Terms Relating or Pertaining to Metal Connector Plates (04.11) |
| ANSI/ASTM E 1814-1996 |
鑄件的計算機斷層攝影(CT)檢查的實施規程范 |
Practice for Computed Tomographic (CT) Examination of Castings |
| ANSI/ASTM E 1815-1996 |
工業放射攝影膠片系統分類用試驗方法 |
Test Method for Classification of Film Systems for Industrial Radiography |
| ANSI/ASTM E 1816-1996 |
用電磁聲傳導(EMAT)技術的超聲波檢驗的實施規程 |
Practice for Ultrasonic Examinations Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
| ANSI/ASTM E 1817-1996 |
使用質量表示指示儀(RQI)的放射檢驗的質量控制實用規程 |
Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators(Rqi-s) |
| ANSI/ASTM E 1818-1997 |
能量在80至300Kev的放射處理用電子束設施中的劑量測定實用規程 |
Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies between 80 and 300 Kev |
| ANSI/ASTM E 1822-2002 |
疊板椅實物的著火試驗方法 |
Test Method for Fire Testing of Real Scale Stacked Chairs |
| ANSI/ASTM E 1828-2002 |
涂料中鉛含量檢測用現場定性化學試驗整套工具工作特性評價指南(04.11) |
Guide for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint (04.11) |
| ANSI/ASTM E 1830M-2002 |
測定光伏模塊的機械集成性的試驗方法(米制) |
Test Methods for Determining the Mechanical Integrity of Photovoltaic Modules (Metric) |
| ANSI/ASTM E 1836-2002 |
設備管理用建筑物地板面積測量的標準分類 |
Standard Classification for Building Floor Area Measurements for Facility Management |
| ANSI/ASTM E 1851-1997 |
耐久硬質墻壁浮動結構電磁屏蔽效果的試驗方法 |
Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures |
| ANSI/ASTM E 1856-1997 |
用于由普通試驗機上獲得數據的計算機化數據獲得系統評估的指南 |
Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines |
| ANSI/ASTM E 186-1996 |
重壁(2-4 1/2-in./51-114 mm)鋼鑄件用參考射線照片 |
Reference Radiographs for Heavy-Walled (2 to 4 1/2-In./51 to 114-Mm) Steel Castings |
| ANSI/ASTM E 1862-1997 |
用紅外成像輻射儀測量和均衡反射溫度的試驗方法 |
Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers |
| ANSI/ASTM E 1902-1997 |
口授、翻譯和錄制健康記錄的安全機密性管理指南 |
Guide for Mangement of the Confidentiality and Security of Dictation, Transcription, and Transcribed Health Record |
| ANSI/ASTM E 1907-1997 |
面層對吸收潮氣敏感的混凝土樓板有關潮氣吸收性測定的實施規程 |
Practices for Determining Moisture-Related Acceptability of Concrete Floors to Receive Moisture-Sensitive Finishes |
| ANSI/ASTM E 1908-1997 |
毒性溶浸過程試驗用的來自于建筑改建或除鉛工程中的碎料廢物樣品的選擇指南 |
Guide for Sample Selection of Debris Waste from a Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) |
| ANSI/ASTM E 1918-1997 |
現場測量水平和低斜表面太陽反射性的試驗方法 |
Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field |
| ANSI/ASTM E 1919-1997 |
有關粒子和噴霧特性的世界范圍公布標準的指南 |
Guide for Worldwide Published Standards Relating to Particle and Spray Characterization |
| ANSI/ASTM E 192-1996 |
航天設備的蠟?zāi)ｄ撹T件的參考射線照相 |
Reference Radiographs for Investment Steel Castings of Aerospace Applications |
| ANSI/ASTM E 1933-1999 |
使用紅外成像輻射計測量和補償發射率的試驗方法 |
Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers |
| ANSI/ASTM E 1936-1997 |
評價輻射攝影數字化系統性能的參考輻射攝影 |
Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems |
| ANSI/ASTM E 1939-1998 |
血液輻照劑量測定的實施規程 |
Practice for Blood Irradiation Dosimetry |
| ANSI/ASTM E 1940-2001 |
無菌釋放計劃用昆蟲輻照劑量測定的指南 |
Guide for Dosimetry for Irradiation of Insects for Sterile Release Programs |
| ANSI/ASTM E 1956-2001 |
輻射處理用熱致發光劑量測定(TLD)系統使用的操作規程 |
Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing |
| ANSI/ASTM E 196-1995 |
地板和平屋頂承重測試的實施規程 |
Practice for Gravity Load Testing of Floors and Flat Roofs (04.11) |
| ANSI/ASTM E 1966-1998 |
耐火連接系統的試驗方法 |
Test Method for Fire Resistive Joint Systems |
| ANSI/ASTM E 1985-1998 |
用戶鑒定和授權指南 |
Guide for User Authentication and Authorization |
| ANSI/ASTM E 1994-1998 |
使用過程導向的平均質量檢查最低限和批量允許不良率的抽樣方案的操作規程 |
Practice for Use of Process Oriented AOQL and LTPD Sampling Plans |
| ANSI/ASTM E 1995-1998 |
在單個閉室中利用水平試樣測量煙霧昏暗度的試驗方法 |
Test Method for Measurement of Smoke Obscuration Using in a Single Closed Chamber, with the Test Specimen Oriented Horizontally |
| ANSI/ASTM E 1998-1998 |
評定減壓誘導的通風燃?xì)庥镁呋亓骱鸵绯龅男聵?biāo)準指南 |
New Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances |
| ANSI/ASTM E 2003M-1999 |
中子射線攝影束純度顯示器制造的實施規程 |
Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators [Metric] |
| ANSI/ASTM E 2010-2001 |
窗組件正壓燃燒試驗的試驗方法 |
Test Method for Positive Pressure Fire Test of Window Assemblies |
| ANSI/ASTM E 2013-1999 |
在價值分析研究中繪制功能分析系統技術圖和進行功能分析的實施規程 |
Practice for Constructing Fast Diagrams and Performing Function Analysis During Value Analysis Study |
| ANSI/ASTM E 2016-1999 |
工業紡織金屬絲布規范 |
Specification for Industrial Woven Wire Cloth |
| ANSI/ASTM E 2023-1999 |
中子射線攝影敏感度顯示器制造的實施規程 |
Practice for Fabrication of Neutron Radiographic Sensitivity Indicator |
| ANSI/ASTM E 2024-1999 |
用熱導泄漏探測器測定大氣泄漏的試驗方法 |
Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector |
| ANSI/ASTM E 2025-1999 |
門窗部件和組件耐沖擊力評定的試驗方法 |
Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies |
| ANSI/ASTM E 2029-1999 |
用示蹤氣體溶液法測量管道中體積和質量流量率的試驗方法 |
Test Method for Volumetric and Mass Flow, Rate Measurement in a Duct Using Tracer Gas Dilution |
| ANSI/ASTM E 2030-2001 |
熒光安全標志推薦使用指南 |
Guide for Recommended Uses of Photoluminescent Safety Markings |
| ANSI/ASTM E 2032-1999 |
耐火試驗數據的擴展 |
Extension of Data from Fire Endurance Tests |
| ANSI/ASTM E 2033-1999 |
計算機輻射(光刺激照明法)實施規程 |
Practice for Computed Radiology (Photostimulable Luminescence Method) |
| ANSI/ASTM E 2052-1999 |
設備中鉛危害識別和管理指南 |
Guide for Identication and Management of Lead Hazards in Facilities |
| ANSI/ASTM E 2058-2001 |
使用火焰?zhèn)鞑x器測量合成聚酯材料易燃性的試驗方法 |
Methods of Test for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus |
| ANSI/ASTM E 2061-2001 |
鐵路運輸車輛火災評估指南 |
Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
| ANSI/ASTM E 2067-2000 |
完全氧燃燒熱量測量火災試驗實施規程 |
Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
| ANSI/ASTM E 2072-2001 |
熒光(磷光)安全標志規范 |
Specification for Photoluminescent (Phosphorescent) Safety Markings |
| ANSI/ASTM E 2073-2001 |
熒光(磷光)安全標志的可見光發光率的試驗方法 |
Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings |
| ANSI/ASTM E 2084-2000 |
用數字符號鑒定醫療保健信息的規范 |
Specification for Authentication of Healthcare Information using Digital Signatures |
| ANSI/ASTM E 2085-2001 |
醫療保健信息安全框架指南 |
Guide on Security Framework for Healthcare Information |
| ANSI/ASTM E 2086-2000 |
Internet和Intranet醫療保健安全指南 |
Guide for Internet and Intranet Healthcare Security |
| ANSI/ASTM E 2097-2000 |
完全氧燃燒熱量測量火災試驗實施規程 |
Practice for Full Scale Oxygen Consumption Calorimetry Fire Tests |
| ANSI/ASTM E 2098-2000 |
PB級外絕緣涂層系統(EIFS)中使用的玻璃纖維增強網暴露于氫氧化鈉溶液后拉伸斷裂強度測定的試驗方法 |
Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation Finish Systems (EIFS), After Exposure to a Sodium Hydroxide Solution |
| ANSI/ASTM E 2099-2000 |
外墻系統預制造實驗室模型規范和評定的實施規程 |
Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems |
| ANSI/ASTM E 2102-2000 |
使用錐形輻射加熱器測量屏蔽的質量損失和可燃性的方法 |
Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| ANSI/ASTM E 2104-2001 |
高級航空和渦輪機材料和件的射線照相檢查實施規程 |
Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components |
| ANSI/ASTM E 2110-2001 |
外部絕緣和涂層系統的術語 |
Terminology for Exterior Insulation and Finish Systems (EIFS) |
| ANSI/ASTM E 2115-2000 |
對常用于兒童的住宅建筑和其它財產進行鉛危害性評估的指南 |
Guide for Conducting Lead Hazard Assessments of Residential Housing and Other Properties Frequented by Children |
| ANSI/ASTM E 2116-2001 |
自含干燥源輻射器的劑量測定實施規程 |
Practice for Dosimetry for a Self-Contained Dry Source Irradiator |
| ANSI/ASTM E 2118-2000 |
電子醫療記錄環境和網絡結構內醫療實驗室服務機構的合作指南 |
Guide for Coordination of Clinical Laboratory Services Within the Electronic Health Record Environment and Networked Architectures |
| ANSI/ASTM E 2120-2000 |
涂料薄膜中鉛含量測量用便攜式X射線熒光光譜儀性能評估的實施規程 |
Practice for the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films |
| ANSI/ASTM E 2121-2001 |
在已有的低層住宅建筑中安裝氡減輕系統的實施規程 |
Practice for Installing Radon Mitigation Systems in Existing Low Rise Residential Buildings |
| ANSI/ASTM E 2127-2001 |
建筑物構造中隔墻系統抵抗拉伸與橫向荷載的組合用靜荷載的試驗方法 |
Test Methods for Static Load Test for Combined Tensile and Transverse Load Resistance of Panel Wall Systems in Building Construction |
| ANSI/ASTM E 2128-2001 |
建筑墻體漏水性評價指南 |
Guide for Evaluating Water Leakage of Building Walls |
| ANSI/ASTM E 2129-2001 |
建筑部件持續評定用數據采集的實施規程 |
Practice for Data Collection for Sustainability Assessment of Building Elements |
| ANSI/ASTM E 213-1996 |
金屬管道的超聲檢驗實施規程 |
Practice for Ultrasonic Examination of Metal Pipe and Tubing |
| ANSI/ASTM E 2134-2001 |
外部絕緣和涂層系統粘著抗拉強度性能評定的試驗方法 |
Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System |
| ANSI/ASTM E 2136-2001 |
單系列附屬和獨立住房建筑物的性能說明和評價指南.耐久性 |
Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings - Durability |
| ANSI/ASTM E 214-1996 |
用脈沖縱向波反射法做金屬浸入超聲檢驗的實施規程 |
Practice for Immersed Ultrasonic Examination by the Reflection Method Using Pulsed Longitudinal Waves |
| ANSI/ASTM E 2140-2001 |
用靜水壓差測定金屬屋頂板組件的滲水性的試驗方法 |
Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head |
| ANSI/ASTM E 2141-2001 |
密封絕緣玻璃組件上可吸收性電化色涂層的耐久性的評定方法 |
Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units (Note 1) |
| ANSI/ASTM E 2145-2001 |
醫療健康信息建模實施規程 |
Practice for Modeling in Health Informatics |
| ANSI/ASTM E 2150-2001 |
生物圈運行要素的分類.環境成本要素結構 |
Classification for Life-Cycle Environmental Work Elements - Environmental Cost Elements Structure |
| ANSI/ASTM E 2151-2001 |
單系列附屬和獨立住房建筑物的性能說明和評價指南術語.耐久性 |
Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings |
| ANSI/ASTM E 2156-2001 |
符合一戶附聯式住宅和獨建式住宅性能標準指南的比較設計、交替系統和材料的經濟實效評定指南 |
Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance With Performance Standard Guides for Single-Family Attached and Detached Dwellings |
| ANSI/ASTM E 2166-2001 |
組織和管理建筑數據規程 |
Practice for Organizing and Managing Building Data |
| ANSI/ASTM E 2167-2001 |
石料固結性的選擇和應用指南 |
Guide for the Selection and Use of Stone Consolidants |
| ANSI/ASTM E 2168-2001 |
建筑施工評估中的津貼、預算外費用和儲備金的分類 |
Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating |
| ANSI/ASTM E 2174-2001 |
安裝的擋火物的現場檢驗操作規程 |
Practice for On-Site Inspection of Installed Firestops |
| ANSI/ASTM E 2179-2001 |
實驗室測量地板覆蓋物減緩撞擊聲音通過混凝土地面?zhèn)鬏數挠行缘脑囼?yàn)方法 |
Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| ANSI/ASTM E 2182-2002 |
保健中臨床XML DTDs規范 |
Specification for Clinical XML DTDs in Healthcare |
| ANSI/ASTM E 2183-2002 |
XML DTD設計、構造和實施規范/指南 |
Practice/guide for XML DTD Design, Architecture and Implementation |
| ANSI/ASTM E 2184-2002 |
保健文件格式規范 |
Specification for Healthcare Document Formats |
| ANSI/ASTM E 2185-2001 |
獨立數字聽寫系統與工作站之間數字聲音數據傳送規范 |
Specification for Transferring Digital Voice Data Between Independent Digital Dictation Systems and Workstations |
| ANSI/ASTM E 2187-2002 |
測量香煙引火強度的試驗方法 |
Test Method for Measuring the Ignition Strength of Cigarettes |
| ANSI/ASTM E 23-2002 |
金屬材料切口試棒沖擊試驗的試驗方法 |
Test Methods for Notched Bar Impact Testing of Metallic Materials |
| ANSI/ASTM E 241-1990 |
建筑結構防水損壞提高耐久性的實施規程 |
Practices for Increasing Durability of Building Constructions Against Water-Induced Damage (04.11) |
| ANSI/ASTM E 242-2001 |
作為一些參數的射線攝影圖像而出現的參考射線攝影 |
Reference Radiographs for Appearances of Radiographic Images as Certain Parameters are Changed |
| ANSI/ASTM E 243-1997 |
銅及銅合金管的電磁(渦流)檢驗實施規范 |
Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes |
| ANSI/ASTM E 272-1997 |
高強度銅基和鎳銅合金鑄件用參考射線照片 |
Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings |
| ANSI/ASTM E 273-2001 |
徑向焊接管道的超聲檢驗操作規程 |
Practice for Ultrasonic Examination of Longitudinal Welded Pipe and Tubing |
| ANSI/ASTM E 280-1996 |
重壁(4 1/2-12in.)(114-305 mm)鋼鑄件的基準射線照相 |
Reference Radiographs for Heavy-Walled (4 1/2 to 12-in. (114 to 305-mm)) Steel Castings |
| ANSI/ASTM E 283-1991 |
通過樣品的具體壓差測定由外窗、窗簾墻和門泄露空氣比率的試驗方法 |
Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen (04.11) |
| ANSI/ASTM E 292-2001 |
材料斷裂缺口拉伸試驗的執行時間的試驗方法 |
Test Methods for Conducting Time for Rupture Notch Tension Tests of Materials |
| ANSI/ASTM E 309-1995 |
用磁化飽和對鋼管產品的邊際電流檢驗的操作規程 |
Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation |
| ANSI/ASTM E 310-1996 |
錫青銅鑄件用參考射線照相 |
Reference Radiographs for Tin Bronze Castings |
| ANSI/ASTM E 317-1996 |
不使用電子測量?jī)x的超聲波脈沖回音系統的性能特征評估的實施規程 |
Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Systems Without the Use of Electronic Measurement Instruments |
| ANSI/ASTM E 329-2002 |
從事建筑材料試驗和/或檢驗的機構的規范 |
Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction |
| ANSI/ASTM E 330-1996 |
通過均一靜態空氣壓差測定外窗、窗簾墻和門結構性能的試驗方法 |
Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference (04.11) |
| ANSI/ASTM E 331-1996 |
通過均一靜態空氣壓差測定門、窗簾墻、外窗水滲透的試驗方法 |
Test Method for Water Penetration of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference (04.11) |
| ANSI/ASTM E 336-1997 |
建筑物中隔音性能的測量試驗方法 |
Test Method for Measurement of Airborne Sound Insulation In Buildings |
| ANSI/ASTM E 376-1996 |
用磁場或渦流(電磁的)試驗法測量覆層厚度的實施規程 |
Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods |
| ANSI/ASTM E 390-2001 |
鋼熔焊接的參考射線攝影 |
Reference Radiographs for Steel Fusion Welds |
| ANSI/ASTM E 405-1989 |
窗磨損試驗旋轉操作的試驗方法 |
Test Methods for Wear Testing Rotary Operations for Windows (04.11) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com