標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM D5623-2004 |
用氣相色譜法和硫化選擇性檢測法測定輕質石油液體中硫化物的試驗方法 |
|
| ANSI/ASTM D5663-2003 |
包裝紙和紙板回收成分確認的指南 |
(Guide for Validating Recycled Content in Packaging Paper and Paperboard ) |
| ANSI/ASTM D5672-2003 |
柔性泡沫材料的試驗方法.用25-mm (1in.)撓曲法測量壓痕力撓度 |
(Test Method for Flexible Cellular Materials--measurement of Indentation Force Deflection Using a 25-mm (1in.) Deflection Technique ) |
| ANSI/ASTM D5673-2002 |
采用電感耦合等離子體質譜法測試水中素的方法 |
(Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectometry ) |
| ANSI/ASTM D5673-2004 |
采用電感耦合等離子體質譜法測試水中素的試驗方法 |
|
| ANSI/ASTM D56a-2002 |
用泰格(Tag)密封試驗器測定閃點的試驗方法 |
(Flash Point by Tag Closed Tester, Method of Test for (05.01, 06.03) ) |
| ANSI/ASTM D5704-2004 |
手動傳輸和主傳動軸用潤滑油的熱穩定性和氧化穩定性評價的試驗方法 |
(Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmission and Final Drive Axles (05.03) ) |
| ANSI/ASTM D5704-2005 |
評價手動傳輸和主傳動軸用潤滑油的熱穩定性和氧化穩定性的試驗方法 |
|
| ANSI/ASTM D5705-2004 |
殘留燃料油上氣相中測定硫化氫的試驗方法 |
|
| ANSI/ASTM D5705-2004 |
殘留燃料油上氣相中測定硫化氫的試驗方法 |
(Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase above Residual Fuel Oils (05.03) ) |
| ANSI/ASTM D5760-2005 |
人工傳輸齒輪潤滑劑性能規范(05.03) |
|
| ANSI/ASTM D5762-2005 |
用船進氣化學發光法測定石油和石油產品中氮的試驗方法 |
|
| ANSI/ASTM D5769-2004 |
用氣相色譜/質譜法測定精制汽油中苯、甲苯和總芳香族含量的試驗方法 |
|
| ANSI/ASTM D5770-2002 |
半定量法微觀測定廢潤滑油酸值的試驗方法 |
(Test Method for Semi-Quantitative Micro Determination of Acid Number of Used Lubricating Oils ) |
| ANSI/ASTM D5771-2003 |
石油產品始凝點的試驗方法.光學檢測逐級降溫法 |
(Test Method for Cloud Point of Petroleum Products - Optical Detection Stepped Cooling Method ) |
| ANSI/ASTM D5771-2004 |
石油產品始凝點的試驗方法.光學檢測逐級降溫法 |
|
| ANSI/ASTM D5771-2004 |
石油產品始凝點的試驗方法.光學檢測逐級降溫法 |
|
| ANSI/ASTM D5771-2005 |
石油產品始凝點的試驗方法.光學檢測逐級降溫法 |
|
| ANSI/ASTM D5772-2003 |
石油產品始凝點的試驗方法.線性降溫率法 |
(Test Method for Cloud Point of Petroleum Products - Linear Cooling Rate Method ) |
| ANSI/ASTM D5772-2004 |
石油產品始凝點的試驗方法.線性降溫率法 |
|
| ANSI/ASTM D5772-2004 |
石油產品始凝點的試驗方法.線性降溫率法 |
|
| ANSI/ASTM D5772-2005 |
石油產品始凝點的試驗方法.線性降溫率法 |
|
| ANSI/ASTM D5773-2003 |
石油產品始凝點的試驗方法.恒定降溫率法 |
(Test Method for Cloud Point of Petroleum Products - Constant Cooling Rate Method ) |
| ANSI/ASTM D5773-2004 |
石油產品始凝點的試驗方法.恒定降溫率法 |
|
| ANSI/ASTM D5773-2005 |
石油產品始凝點的試驗方法(恒定降溫率法) |
|
| ANSI/ASTM D5800-2003 |
用 Noack法評定潤滑油蒸發損耗的試驗方法 |
(Test Method for Evaporation Loss of Lubricating Oils by the Noack Method ) |
| ANSI/ASTM D5800a-2005 |
Noack法測定潤滑油的蒸發損失的試驗方法 |
|
| ANSI/ASTM D5813-2004 |
現場固化的熱固性樹脂污水管規范 |
|
| ANSI/ASTM D5842-2004 |
揮發性測量用燃料的取樣和搬運的實施規程 |
|
| ANSI/ASTM D5846-2002 |
液壓流體和渦輪機油的一般氧化試驗試驗方法 |
(Test Method for Universal Oxidation Test for Hydraulic Fluids and Turbine Oils ) |
| ANSI/ASTM D5847-2002 |
水分析標準試驗方法的質量控制規范編寫實施規程 |
(Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis ) |
| ANSI/ASTM D5857-2002 |
采用ISO協議和方法的聚酯塑料注入和擠壓材料的規范 |
(Specification for Propylene Plastic Injection and Extrusion Materials Using ISO Protocol and Methodology ) |
| ANSI/ASTM D5862-2004 |
二沖程循環渦輪增壓6v92ta柴油發動機機油評價的試驗方法 |
|
| ANSI/ASTM D5862-2004 |
二沖程循環渦輪增壓6v92ta柴油發動機機油評價的試驗方法 |
(Test Method for Evaluation of Engine Oils in the Two-Stroke Cycle Turbo-Supercharged 6v92ta Diesel Engine ) |
| ANSI/ASTM D5901-2003 |
航空燃料凍結點的試驗方法(自動光學方法) |
(Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) ) |
| ANSI/ASTM D5904-2002 |
通過紫外線、過硫酸鹽氧化物和薄膜電導率檢測對水中全部碳、有機碳和無機碳的試驗方法 |
(Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection ) |
| ANSI/ASTM D5906-2002 |
表面水縱深測量過程中測量水平位置的指南 |
(Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths ) |
| ANSI/ASTM D5927-2003 |
基于ISO 試驗方法的熱塑性聚酯(TPES)注塑和擠塑材料規范 |
(Specification for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods ) |
| ANSI/ASTM D5950-2002 |
石油產品的傾點試驗方法(自動傾斜法) |
(Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) ) |
| ANSI/ASTM D5966-2002 |
評定輕型柴油發動機中滾輪從動桿防磨損用機油的試驗方法 |
(Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine ) |
| ANSI/ASTM D5967-2003 |
評價T8型柴油發動機機油的試驗方法 |
(Test Method for Evaluation of Diesel Engine Oils in the T8 Diesel Engine ) |
| ANSI/ASTM D5968-2004 |
評價柴油發動機機油腐蝕性的試驗方法 |
|
| ANSI/ASTM D5969-2002 |
在稀釋合成海水作用下測定潤滑脂防腐性能的試驗方法 |
(Test Method for Corrosion Preventive Properties of Lubricating Greases in the Presence of Dilute Synthetic Sea Water Environments ) |
| ANSI/ASTM D5969-2005 |
在含稀釋合成海水環境下測定潤滑脂防腐性能的試驗方法 |
|
| ANSI/ASTM D5972-2002 |
航空燃料凍結點的試驗方法(自動相移法) |
(Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method) ) |
| ANSI/ASTM D5985-2002 |
石油產品的傾點試驗方法(旋轉法) |
(Test Method for Pour Point of Petroleum Products (Rotational Method) ) |
| ANSI/ASTM D6070-2002 |
預組裝的電線和電纜用光壁可盤繞的聚乙烯(PE)管道物理特性的試驗方法 |
(Test Methods for Physical Properties of Smooth-Wall, Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable ) |
| ANSI/ASTM D6079-2002 |
用高頻往復移動式裝置評價柴油燃料潤滑性的試驗方法 |
(Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) ) |
| ANSI/ASTM D6091-2003 |
可忽略校準誤差的分析方法用99%95%實驗室間檢測評估(IDE)實施規范 |
(Practice for 99%/95% Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error ) |
| ANSI/ASTM D6096-2002 |
90C操作的電線和電纜用聚氯乙烯絕緣規范 |
(Specification for Poly(vinyl Chloride) Insulation for Wire and Cable, 90 C Operation ) |
| ANSI/ASTM D6099-2003 |
聚氨酯原材料的試驗方法:中等酸度至高酸度芳香異氰酸酯酸度的測定 |
(Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates ) |
| ANSI/ASTM D6108-2003 |
塑料塊材和型材的抗壓特性的試驗方法 |
(Test Method for Compressive Properties of Plastic Lumber and Shapes ) |
| ANSI/ASTM D6109-2003 |
未增強和增強的塑料塊材的彎曲特性的試驗方法 |
(Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber ) |
| ANSI/ASTM D611-2004 |
石油產品和烴類溶劑的混合苯胺點和苯胺點的試驗方法 |
|
| ANSI/ASTM D6111-2003 |
用位移法測定塑料塊材的體密度和比重的試驗方法 |
(Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement ) |
| ANSI/ASTM D6113-2003 |
使用錐形量熱計對包含在電氣或光纖電纜中的絕緣材料的著火試驗反應特性測定的標準試驗方法 |
(Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables ) |
| ANSI/ASTM D6121-2004 |
主動雙曲面驅動軸用潤滑劑在低速和大扭力條件下載荷能力評價的試驗方法 |
|
| ANSI/ASTM D6121-2004 |
主動雙曲面驅動軸用潤滑劑在低速和大扭力條件下載荷能力評價的試驗方法 |
(Test Method for Evaluation of the Load Carrying Capacity of Lubricants under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles ) |
| ANSI/ASTM D6121-2005 |
評價主動雙曲面驅動軸用潤滑劑在低速和大扭力條件下載荷能力的試驗方法 |
|
| ANSI/ASTM D613-2005 |
柴油十六烷值的試驗方法 |
|
| ANSI/ASTM D6138-2003 |
在動態潮濕環境中測定潤滑油脂防腐性的試驗方法(EMCOR試驗) |
(Test Method for Determination of Corrosion Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test) ) |
| ANSI/ASTM D613a-2003 |
柴油十六烷值的試驗方法 |
(Test Method for Cetane Number of Diesel Fuel Oil ) |
| ANSI/ASTM D6158-2005 |
礦物液壓油規范 |
|
| ANSI/ASTM D6201-2003 |
進油閥沉積物形成用無鉛火花點火發動機燃料的功率計評價試驗方法 |
(Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Value Deposit Formation ) |
| ANSI/ASTM D6201-2004 |
進油閥沉積物形成用無鉛火花點火發動機燃料的功率計評價用試驗方法 |
|
| ANSI/ASTM D6202-2002 |
測定載有火花點燃式發動機的小轎車和輕型卡車的汽車發動機油節油效果的試驗方法 |
(Test Method for Measurement of the Effects of Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence via Spark Ignition Engine ) |
| ANSI/ASTM D6224-2002 |
輔助動力裝置用潤滑油的使用監測實施規范 |
(Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment ) |
| ANSI/ASTM D6299-2002 |
應用統計質量保證技術評估分析測量系統性能的實施規程 |
(Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance ) |
| ANSI/ASTM D6300-2003 |
石油產品和潤滑劑試驗方法中使用的精確度和偏差數據測定的實施規范 |
(Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants ) |
| ANSI/ASTM D6300-2004 |
石油產品和潤滑劑試驗方法中使用的精確度和偏差數據測定的實施規程 |
|
| ANSI/ASTM D6301-2003 |
水中可濾和不可濾物質的樣品采集實施規程 |
(Practice for the Collection of Samples of Filterable and Nonfilterable Matter in Water ) |
| ANSI/ASTM D6304-2003 |
利用庫侖卡爾.費歇爾滴定法測定石油產品、潤滑油、添加劑中水含量的試驗方法 |
(Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration ) |
| ANSI/ASTM D6304-2004 |
利用庫侖卡爾.費歇爾滴定法測定石油產品、潤滑油和添加劑中水含量的試驗方法 |
|
| ANSI/ASTM D6318-2003 |
用棒測法校準回聲測深儀的操作規程 |
(Practice for Calibrating a Fathometer Using a Bar Check Method ) |
| ANSI/ASTM D6335-2002 |
用熱氧化機油模擬試驗測定高溫沉淀物的試驗方法 |
(Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test ) |
| ANSI/ASTM D6352-2004 |
用氣相色譜法測定174℃-700℃沸騰范圍內石油餾份的沸騰范圍分布的試驗方法 |
(Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range of 174 to 700 C by Gas Chromatography ) |
| ANSI/ASTM D6352a-2004 |
用氣相色譜法在174 到 700 C沸騰范圍間測定石油餾出物沸點范圍分布的試驗方法 |
|
| ANSI/ASTM D6354-2004 |
用于鋁生產的碳陰極塊的取樣計劃和芯取樣的指南 |
|
| ANSI/ASTM D6354-2004 |
用于鋁生產的碳陰極塊的取樣計劃和芯取樣的指南 |
(Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production ) |
| ANSI/ASTM D6371-2005 |
柴油和加熱燃料冷卻過濾堵塞點的試驗方法 |
|
| ANSI/ASTM D6375-2005 |
用熱重分析儀(TGA)Noack法測定潤滑油蒸發損耗的試驗方法 |
|
| ANSI/ASTM D6377-2004 |
原油蒸氣壓力測定的試驗方法:Vpcrx(膨脹法) |
|
| ANSI/ASTM D6378-2004 |
測定石油產品、碳?xì)浠衔锖脱趸療N類混合物的蒸氣壓力Vpx的試驗方法(三脹法) |
|
| ANSI/ASTM D6379-2004 |
測定航空燃料和石油餾份中芳香烴類的標準試驗方法.帶有反射指數檢測的高效液相色譜法 |
|
| ANSI/ASTM D6417-2002 |
用毛細管氣相色譜法評估機油揮發性的試驗方法 |
(Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography ) |
| ANSI/ASTM D6424a-2004 |
測定自燃吸氣火花點火式飛機發動機燃料辛烷值的操作規程 |
|
| ANSI/ASTM D6425a-2002 |
用SRV試驗機測量耐特高壓(EP)潤滑油摩擦和抗磨損特性的試驗方法 |
(Test Method for Measuring Friction and Wear Properties of EP Lubricating Oils Using the SRV Test Machine ) |
| ANSI/ASTM D6426a-2002 |
測定中間餾出燃料油可過濾性的試驗方法 |
(Test Method for Determining Filterability of Middle Distillate Fuel Oils ) |
| ANSI/ASTM D6439-2005 |
蒸汽、氣體和水電渦輪潤滑系統的清潔、沖洗和純化指南 |
|
| ANSI/ASTM D6447-2004 |
用伏安測量分析法測定航空渦輪燃料的氫過氧化物值的試驗方法 |
|
| ANSI/ASTM D6447-2004 |
用伏安測量分析法測定航空渦輪燃料的氫過氧化物值的試驗方法 |
(Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis ) |
| ANSI/ASTM D6448-2004 |
來自廢潤滑油的工業鍋爐燃料規范 |
|
| ANSI/ASTM D6469-2004 |
燃料和燃料系統中微生物雜質指南 |
|
| ANSI/ASTM D6483-2003 |
T-9柴油機使用的柴油機滑油的評定試驗方法 |
(Test Method for Evaluation of Diesel Engine Oils in the T-9 Diesel Engine ) |
| ANSI/ASTM D6501-2004 |
鹵水中磷酸的試驗方法 |
|
| ANSI/ASTM D6512-2003 |
實驗室間定量評價的實施規程 |
(Practice for Interlaboratory Quantitation Estimate ) |
| ANSI/ASTM D6514-2003 |
汽輪機油高溫通用氧化試驗的試驗方法 |
(Test Method for High Temperature Universal Oxidation Test for Turbine Oils (1) ) |
| ANSI/ASTM D6557-2004 |
汽車機油防銹特性評價的試驗方法 |
|
| ANSI/ASTM D6557-2004 |
汽車機油防銹特性評價的試驗方法 |
(Test Method for Evaluation of the Rust Preventive Characteristics of Automotive Engine Oils ) |
| ANSI/ASTM D6593-2004 |
在低溫和低載條件下運行的使用汽油燃料的火花點火式內燃機中抑制沉積物形成用汽車機油評價的試驗方法 |
(Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions ) |
| ANSI/ASTM D6593-2005 |
評價在低溫和低載條件下運行的使用汽油燃料的火花點火式內燃機中抑制沉積物形成用汽車機油的試驗方法 |
|
| ANSI/ASTM D6594-2004 |
135℃時柴油機油腐蝕性評價的試驗方法 |
(Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135oC ) |
| ANSI/ASTM D6615-2002 |
噴射B類寬餾分航空渦輪機燃料規范 |
(Specification for Jet B Wide-Cut Aviation Turbine Fuel ) |
| ANSI/ASTM D6615-2005 |
噴射B類寬餾分航空渦輪機燃料規范 |
|
| ANSI/ASTM D664-2004 |
用電勢滴定法測定石油產品酸度值的試驗方法 |
|
| ANSI/ASTM D665-2004 |
在有水條件下蒸汽渦輪機油防銹特性的試驗方法 |
|
| ANSI/ASTM D665-2004 |
在有水條件下蒸汽渦輪機油防銹特性的試驗方法 |
(Rust-Preventing Characteristics of Steam-Turbine Oil in the Presence of Water, Method of Test for (05.01) ) |
| ANSI/ASTM D6708-2004 |
測量某種材料相同特性的兩種試驗方法間預期一致性的提高和統計評定的實施規程 |
|
| ANSI/ASTM D6709-2004 |
序列VIII火花點火發動機中汽車機油評價的試驗方法(CLR油試驗發動機) |
(Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine) ) |
| ANSI/ASTM D6710-2002 |
烴基淬火油評價指南 |
(Guide for Evaluation of Hydrocarbon-Based Quench Oil ) |
| ANSI/ASTM D6732-2002 |
用石墨爐原子吸收光譜測定法測定噴氣發動機燃料中銅含量的試驗方法 |
(Test Method for the Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry ) |
| ANSI/ASTM D6735-2002 |
測量礦物焙燒排氣源中的氣體氯化物和氟化物的試驗方法. 撞擊器方法 |
(Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources - Impinger Method ) |
| ANSI/ASTM D6748a-2002 |
測定由Phenalenes和Phenalenones存在而產生的中間餾出燃料的潛在不穩定性的試驗方法.便攜式光譜儀的快速測 |
(Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones. Rapid Method by Portable Spectrophotometer ) |
| ANSI/ASTM D6749-2002 |
石油產品的傾點試驗方法(自動空氣壓力法) |
(Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method) ) |
| ANSI/ASTM D6750-2002 |
評估高速單缸柴油發動機中機油的試驗方法.1k程序(0.4%燃料硫)和1n程序(0.4%燃料硫) |
(Test Method for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine - 1k Procedure (0.4% Fuel Sulfur) and 1n Procedure (0.04% Fuel Sulfur) ) |
| ANSI/ASTM D6750-2005 |
評價高速單缸柴油發動機機油的試驗方法.1k程序(0.4%燃料硫)和1n程序(0.04%燃料硫) |
|
| ANSI/ASTM D6751-2004 |
蒸餾燃料用生物柴油燃料(B100)混合材料的臨時規范 |
|
| ANSI/ASTM D6751-2004 |
蒸餾燃料用生物柴油燃料(B100)混合材料的臨時規范 |
(Provisional Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels ) |
| ANSI/ASTM D6756-2002 |
使用便攜式光譜檢測儀測定紅染料污染濃度和估算柴油和加熱油的 ASTM色彩的試驗方法 |
(Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer ) |
| ANSI/ASTM D6777-2002 |
測定三氯乙烯的相對硬度的試驗方法 |
(Test Method for Relative Rigidity of Poly(Vinyl Chloride) (PVC) Siding ) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com