標準號 |
中文名稱 |
英文名稱 |
| ANSI/EIA 580BA00-1997 |
空白詳細規范:固定金屬電極薄膜介電AC電容器 |
Blank Detail Specification: Fixed Metallized Electrode Film Dielectric AC Capacitors |
| ANSI/EIA 584-1991 |
連續制造過程計數檢驗用零驗收數取樣的程序和表格 |
Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of a Continuous Manufacturing Process |
| ANSI/EIA 585-1991 |
隔批計數檢驗用零驗收數取樣的程序和表格 |
Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots |
| ANSI/EIA 591-1992 |
用變量試驗數據評定PPM的質量等級 |
Assessment of Quality Levels in PPM Using Variables Test Data |
| ANSI/EIA 595-1993 |
多層瓷片電容器的表觀/機械檢驗 |
Visual/Mechanical Inspection of Multi-Layer Ceramic Chip Capacitors |
| ANSI/EIA 599-A-1998 |
國家電子工藝認證標準 |
National Electronic Process Certification Standard |
| ANSI/EIA 600.31-1997 |
動力線物理層和介質規范 |
Power Line Physical Layer and Medium Specification |
| ANSI/EIA 600.32-1997 |
雙扭物理層和介質規范 |
Twisted Pair Physical Layer and Medium Specification |
| ANSI/EIA 600.33-1997 |
共軸電纜和物理層規范 |
Coax Cable Physical Layer and Medium Specification |
| ANSI/EIA 600.34-1997 |
紅外物理層和介質規范 |
Infrared Physical Layer and Medium Specification |
| ANSI/EIA 600.35-1997 |
RF物理層和介質規范 |
RF Physical Layer and Medium Specification |
| ANSI/EIA 600.37-1997 |
符號編碼亞層 |
Symbol Encoding Sublayer |
| ANSI/EIA 600.38-1997 |
動力線/RF符號編碼亞層 |
Power Line/RF Symbol Encoding Sublayer |
| ANSI/EIA 600.41-1997 |
數據鏈層的描述 |
Description of the Data Link Layer |
| ANSI/EIA 600.42-1997 |
分點媒介通路控制亞層 |
Node Medium Access Control Sublayer |
| ANSI/EIA 600.43-1997 |
分點邏輯鏈控制亞層 |
Node Logical Link Control Sublayer |
| ANSI/EIA 600.81-1997 |
通用應用語言(CAL)規范 |
Common Application Language (CAL) Specification |
| ANSI/EIA 600.82-1997 |
CAL文本描述 |
CAL Context Description |
| ANSI/EIA 601-A-1998 |
在NECQ系統中電子器件性能鑒定的通用程序 |
General Procedures for Capability Approval of Electronic Components in the NECQ-System |
| ANSI/EIA 608-1994 |
21線數據服務推薦規程 |
Recommended Practice for Line 21 Data Service |
| ANSI/EIA 616-1996 |
兩毫米有噴漆板和背板的兩部分接頭 |
Two-Millimeter, Two-Part Connectors for Use with Printed Boards and Backplanes |
| ANSI/EIA 618-1994 |
電子設計互換格式(改進方案290,提高到方案300) |
Electronic Design Interchange Format, Upgrade to Version 300, Upgrade of Version 290 (1S-92) |
| ANSI/EIA 621-1995 |
電子工業協會.消費者電子集團產品和包裝條形碼標準 |
Electronic Industries Association - Consumer Electronics Group Product and Packaging Bar Code Standard |
| ANSI/EIA 622-1995 |
電子接頭相關術語集 |
Glossary of Electrical Connector Related Terms |
| ANSI/EIA 623-1994 |
固體件按政府合同的采購質量 |
Procurement Quality of Solid State Components by Government Contractors |
| ANSI/EIA 624-1995 |
電子工業協會.非零售適用的產品包裝條形碼標簽標準 |
Electronic Industries Association - Product Package Bar Code Label Standard for Non-Retail Applications |
| ANSI/EIA 625-1994 |
搬運靜電放電敏感裝置的要求 |
Requirements for Handling Electrostatic-Discharge-Sensitive (ESDS) Devices |
| ANSI/EIA 632-1998 |
工程系統化的過程 |
Processes for Engineering a System |
| ANSI/EIA 633.32-1997 |
CE母線雙扭物理層一致性 |
CEBus Twisted Pair Physical Layer Conformance |
| ANSI/EIA 633.34-1997 |
CE母線紅外物理層一致性 |
CEBus Infrared Physical Layer Conformance |
| ANSI/EIA 633.37-1997 |
CE母線符號編碼亞層物理層一致性 |
CEBus Symbol Encoding Sublayer Physical Layer Conformance |
| ANSI/EIA 633.38-1997 |
CE母線PL和PF符號編碼亞層物理層一致性 |
CEBus PL and RF Symbol Encoding Sublayer Physical Layer Conformance |
| ANSI/EIA 633.42-2000 |
數據鏈層.一致性規范 |
Data Link Layer Conformance Specification |
| ANSI/EIA 636-1996 |
推薦的揚聲器安全規程 |
Recommended Loudspeaker Safety Practices |
| ANSI/EIA 638-1995 |
表面安裝的可焊接性試驗 |
Surface Mount Solderability Test |
| ANSI/EIA 639-1996 |
消費者便攜式攝像放像機或攝像機低照度性能 |
Consumer Camcorder or Video Camera Low Light Performance |
| ANSI/EIA 649-1998 |
配置管理的國家一致標準 |
National Consensus Standard for Configuration Management |
| ANSI/EIA 654-2000 |
電線和電氣件的焊接熱試驗過程的耐受性 |
Resistance to Soldering Heat Test Procedure for Wire and Electrical Components |
| ANSI/EIA 656-A-1999 |
I/O緩沖信息規范(IBIS)(SP-3527) |
I/O Buffer Information Specification (IBIS) (SP-3527) |
| ANSI/EIA 670-1997 |
質量系統評價 |
Quality Systems Assessment |
| ANSI/EIA 671-1996 |
組件故障分析和修正過程要求 |
Component Problem Analysis and Corrective Action Requirements |
| ANSI/EIA 674-1996 |
小型系數為45.7mm(1.8英寸)的磁盤驅動器規范 |
Specification for Small Form Factor 45.7 mm (1.8 in) Disk Drives (SP-3556-A) |
| ANSI/EIA 675-1996 |
小型系數為33.0mm(1.8英寸)的磁盤驅動器規范 |
Specification for Small Form Factor 33.0 mm (1.3 in) Disk Drives (SP-3557-A) |
| ANSI/EIA 676-1996 |
小型系數為45.7mm(1.8英寸)的高密度[15mm(0.9英寸)]磁盤驅動器(SP-3558-A)規范 |
Specification for Small Form Factor 45.7 mm (1.8 in) Disk Drives 15 mm (0.9 in) High (SP-3558-A) |
| ANSI/EIA 677-1997 |
小型動力連接銷的規范 |
Specification for Small Form Factor Power Connector Pin Dimensions |
| ANSI/EIA 693-1997 |
視頻音頻母線物理層和媒介規范 |
Audio Video Bus (AV Bus) Physical Layer and Media Specification |
| ANSI/EIA 699-1997 |
石英晶體協振器視覺檢驗的試驗方法 |
Test Method for the Visual Inspection of Quartz Crystal Resonator Blanks |
| ANSI/EIA 7000000-A-1996 |
已質量認證的電子和電氣連接器(3MHz頻率以下)總規范 |
Generic Specification for Electronic and Electrical Connectors of Certified Quality (for Frequencies Essentially below 3 MHz) |
| ANSI/EIA 700A000-1997 |
驗證質量的印制板連接件的分規范 |
Sectional Specification for Printed Board Connectors of Certified Quality (for use in dc/Low Frequency Analog Applications and in Digital Applications Employing High Speed Data Rates) |
| ANSI/EIA 700A0AB-1995 |
1.27mm間距68回路存儲插件互連系統的詳細規范 |
Detail Specification for 1.27mm Pitch, 68 Circuit Memory Card Interconnect System |
| ANSI/EIA 700A0AC-1996 |
1.00mm間距88環形DRAM存儲卡互連系統的詳細規范 |
Detail Specification for 1.00 mm Pitch, 88 Circuit Dram Memory Card Interconnect System (SP-3048) |
| ANSI/EIA 700A0AD-1997 |
1.27mm孔距,帶狀接觸的梯型自鎖I/O連接件接口詳細規范 |
Detail Specification for the Interface of the 1.27-mm Pitch, Ribbon Contact (Leaf Spring) Trapezoidal Shaped, Self-Locking I/O Connector |
| ANSI/EIA 700AOAA-1995 |
1.27mm螺距、帶狀觸點、不規則四邊形、屏蔽I/O接頭的詳細規范 |
Detail Specification for 1.27 mm Pitch, Ribbon Contact, Trapezoidal Shaped, Shielded I/O Connector |
| ANSI/EIA 700AOAB-1995 |
1.27mm間距、68環形存儲卡互連系統的詳細規范 |
Detail Specification for 1.27mm Pitch, 68 Circuit Memory Card Interconnect System |
| ANSI/EIA 700AOAE-2000 |
使用單連接固定的1.27mm間距雙排上具有不可移動的帶式電纜接觸的錐形連接件的詳細規范 |
Detail Specification for Trapezoidal Connectors with Non-Removable Ribbon Cable Contacts on 1.27 mm Pitch Double Row Used with Single Connector Attachments (SCA2) |
| ANSI/EIA 700AOAF-2000 |
用于非常高密度電纜連接的0.8mm間距的錐形屏蔽連接器的詳細規范 |
Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI) |
| ANSI/EIA 700B000-1999 |
矩形錐形連接器的分規范 |
Sectional Specification for Rectangular/Trapezoidal Connectors |
| ANSI/EIA 700BA00-1998 |
驗證了質量的矩形/梯形空白詳細規范 |
Blank Detail Specification for Rectangular/Trapezoidal Connectors of Certified Quality |
| ANSI/EIA 700BAAD-2000 |
通用系列總線加功率連接器系列A的屏蔽矩形連接器的詳細規范 |
Detail Specification for Shielded Rectangular Connectors for Universal Serial Bus Plus Power Connectors Series A |
| ANSI/EIA 700BAAE-2000 |
通用系列總線加功率連接器系列B的屏蔽矩形連接器的詳細規范 |
Detail Specification for Shielded Rectangular Connectors for Universal Serial Bus Plus Power Connectors SeriesB |
| ANSI/EIA 700C000-1996 |
評定了質量的線路多點接觸的連接件分規范 |
Sectional Specification for Circular Multicontact Connectors of Assessed Quality (for Frequencies Essentially Below 3MHz) |
| ANSI/EIA 700D000-1997 |
驗證質量的不連續接觸的分規范 |
Sectional Specification for Discrete Contacts of Certified Quality |
| ANSI/EIA 706-1997 |
件標記標準 |
Component Marking Standard |
| ANSI/EIA 709.1-A-1999 |
控制網絡協議規范 |
Control Network Protocol Specification |
| ANSI/EIA 709.3-1999 |
自由拓?fù)渑与p股通路規范 |
Free-Topology Twisted-Pair Channel Specification |
| ANSI/EIA 710-1997 |
空間級電氣連接器的要求指南 |
Requirements Guide for Space Grade Electrical Connectors |
| ANSI/EIA 720-1997 |
小倍速63.5mm(2.5in)磁盤驅動器規范 |
Specification for Small Form Factor 63.5 mm (2.5) Disk Drives |
| ANSI/EIA 721.1-1999 |
通用CAL規范.通用CAL語句,方法,和目標規范 |
Generic CAL Specification - Generic CAL Syntax, Methods, and Objects |
| ANSI/EIA 721.2-1999 |
通用CAL上下文描述規范 |
Generic CAL Context Description Specification |
| ANSI/EIA 721.3-1999 |
交點應用層規范 |
Node Application Layer Specification |
| ANSI/EIA 721.4-1999 |
通用CAL服務質量 |
Generic CAL Quality of Service |
| ANSI/EIA 724-1997 |
產品生命周期數據模式 |
Product Life Cycle Data Model |
| ANSI/EIA 740-1999 |
小型88.9 mm (3.5 in)光盤驅動器規范 |
Specification for Small Form Factor 88.9 mm (3.5 in) Disk Drives |
| ANSI/EIA 741-2002 |
小型 133.35 mm (5.25 in) 光盤驅動器的規范 |
(Specification for Small Form Factor 133.35 mm (5.25 in) Disk Drives (SP-3877-A) ) |
| ANSI/EIA 743-1999 |
單色顯象管可使用屏幕尺寸 |
Usable Screen Dimensions for Monochrome Display Tubes |
| ANSI/EIA 748-1998 |
獲得值管理系統 |
Earned Value Management System |
| ANSI/EIA 765-A-2000 |
國際和國家質量標準索引 |
International and National Quality Standards Index |
| ANSI/EIA 772-2001 |
熔斷器的用戶應用指南 |
Users Application Guide to Fuses |
| ANSI/EIA 773-2000 |
文件建立和修改的清單 |
Checklist for Documentation Development and Revision |
| ANSI/EIA 776.1-1999 |
CEBus-EIB 電路網絡描述 |
Description of the CEBus-EIB Router |
| ANSI/EIA 776.2-1999 |
CEBus-EIB 電路網絡中速存取控制內層 |
CEBus-EIB Router Medium Access Control Sublayer |
| ANSI/EIA 776.3-1999 |
CEBus-EIB 電路網絡邏輯線路控制內層 |
CEBus-EIB Router Logical Link Control Sublayer |
| ANSI/EIA 776.4-1999 |
CEBus-EIB 電路網絡層 |
CEBus-EIB Router Network Layer |
| ANSI/EIA 776.5-1999 |
EIB通信協議 |
The EIB Communications Protocol |
| ANSI/EIA 830-2000 |
整體米制應用于征購的模式 |
Model for Integrating Metrics into the Procurement Process |
| ANSI/EIA 832-2000 |
過程改進導則 |
Process Improvement Guidelines |
| ANSI/EIA 844-2001 |
一般通用語言(CAL)的XML編碼系統 |
XML Encoding of Generic Common Application Language (CAL) |
| ANSI/EIA-198-1-F-2002 |
I, II, III, and IV類陶瓷介質電容器 |
(Ceramic Dielectric Capacitors, Classes I, II, III, and IV ) |
| ANSI/EIA-364-109-2003 |
電連接器的電感(回路)測量試驗程序(1 nH - 10 nH) |
(Inductance (Loop) Measurement Test Procedure for Electrical Connectors (1 nH - 10 nH) ) |
| ANSI/EIA-364-10B-2002 |
電連接器的液體浸沒試驗程序 |
(Fluid Immersion Test Procedure for Electrical Connectors ) |
| ANSI/EIA-364-10C-2004 |
電連接器的液體浸入試驗規程 |
|
| ANSI/EIA-364-16A-2002 |
電連接器的折斷力(無焊繞接)的試驗程序 |
(Stripping Force (Solderless Wrapped Connection) Test Procedure for Electrical Connectors ) |
| ANSI/EIA-364-20C-2004 |
電連接器.耐電壓試驗程序 |
|
| ANSI/EIA-364-30A-2002 |
電連接器和插座的電容試驗程序 |
(Capacitance Test Procedure for Electrical Connectors and Sockets ) |
| ANSI/EIA-364-33A-2002 |
電連接器TP-33感應試驗 |
(TP-33 Inductance Testing for Electrical Connectors ) |
| ANSI/EIA-364-51A-2002 |
電連接器.抗冰試驗方法 |
(Electrical Connectors - Ice Resistance Test Procedure ) |
| ANSI/EIA-364-52A-2003 |
連接器/插座中使用的觸點終端的軟釬焊性的TP52試驗程序 |
(TP 52 Test Procedures for Solderability of Contact Terminations Use in Connectors/Sockets ) |
| ANSI/EIA-364-56B-2005 |
電氣連接器和插座的TP-56B耐焊接性加熱試驗過程 |
|
| ANSI/EIA-364-58A-2003 |
電連接器.有可拆卸觸點的連接器的機械荷載溫度壽命(在一定溫度下靜態機械荷載) |
(Electric Connectors - Temperature Life With Mechanical Loading for Connectors with Removable Contacts (Static Mechanical Load at Temperature) ) |
| ANSI/EIA-364-62A-2004 |
電子連接器和插座的終端強度試驗規程TP-62A |
|
| ANSI/EIA-364-69A-2002 |
電連接器的電觸點的低水平感應測量 |
(Low-Level Inductance Measurement for Electrical Contacts of Electrical Connectors ) |
| ANSI/EIA-364-78A-2002 |
電連接器腔間泄漏接合完整性試驗規程.新試驗規程*78 |
(New Test Procedure *78, Cavity-to-Cavity Leakage Bonding Integrity Test Procedure for Electrical Connectors ) |
| ANSI/EIA-364-80-2002 |
電連接器和插座的低頻防護效果試驗方法 |
(Low Frequency Shielding Effectiveness Test Procedure for Electrical Connectors and Sockers ) |
| ANSI/EIA-364-81A-2005 |
電連接器套、連接器組件和插座的燃燒特性試驗程序 |
|
| ANSI/EIA-364-82A-2005 |
電連接器套、連接器組件和插座的塑料腐蝕性試驗程序 |
|
| ANSI/EIA-364-91A-2005 |
電連接器和插座的粉塵試驗 |
|
| ANSI/EIA-364-96-2002 |
電連接器金屬化孔完整性的試驗方法TP-96 |
(TP-96, Plated Through Hole Integrity Test Procedure for Electrical Connectors ) |
| ANSI/EIA-463-B-2003 |
重型(1型)和輕型(2型)交流電動機起動用鋁電解固定電容器 |
(Electrolytic Capacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) and Light Duty (Type 2), Fixed Aluminum ) |
| ANSI/EIA-4900-2002 |
半導體器件外部生產的特定溫度范圍的利用 |
(Use of Semiconductor Devices Outside Manufacturers’ Specified Temperature Ranges ) |
| ANSI/EIA-575-A-2005 |
表面安裝的一般用途矩形電阻器 |
|
| ANSI/EIA-576-A-2005 |
表面安裝的矩形精密電阻器 |
|
| ANSI/EIA-616-A-2002 |
與印制板和底板一起使用的兩毫米兩件式連接器 |
(Two-Millimeter, Two-Part Connectors for Use with Printed Boards and Backplanes ) |
| ANSI/EIA-632-2003 |
系統工程設計方法 |
(Processes for Engineering a System ) |
| ANSI/EIA-741-2002 |
低波形因素133.35 mm (5.25英寸)盤驅動器的規范 |
(Specification for Small Form Factor 133.35 mm (5.25 in) Disk Drives (SP-3877-A) ) |
| ANSI/EIA-948-2004 |
自動搬運用組合托盤 |
|
| ANSI/EIA/CEA 709.1-B-2002 |
控制網絡協議規范 |
(Control Network Protocol Specification ) |
| ANSI/EIA/CEA 852-2002 |
國籍協議頻道的協調成分網絡 |
(Tunneling Component Network Protocols Over Internet Protocol Channels ) |
| ANSI/EIA/TIA 382-A-1989 |
工作在27MHz頻帶的民用頻帶無線電臺調幅發射接收機的最低標準 |
Minimum Standards - Citizens Band Radio Service Amplitude Modulated (AM) Transceivers Operating in the 27 MHz Band |
| ANSI/EIA/TIA 455-100A-1989 |
纖維光纜氣體泄漏試驗 |
Gas Leakage Test for Fiber Optic Cable |
| ANSI/EIA/TIA 455-104A-1993 |
光纜周期性撓曲變化試驗 |
Fiber Optic Cable Cyclic Flexing Test |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com