標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM D 957-1995 |
工業用塑料壓制模表面溫度的測定規程 |
Practice for Determining Mold Surface Temperature of Commercial Molds for Plastics (08.01) |
| ANSI/ASTM D 958-1988 |
塑料試樣用標準ASTM模的溫度測定規程 |
Practice for Determining Temperatures of Standard ASTM Molds for Test Specimens of Plastics (08.01) |
| ANSI/ASTM D 96-1988 |
原油中水和沉積物的(05.01)試驗方法 |
Water and Sediment in Crude Oils, Method of Test for (05.01) |
| ANSI/ASTM D 97-1987 |
石油產品傾點的測試方法 |
Pour Point, Method of Test for (05.01, 10.03) |
| ANSI/ASTM D 971-1991 |
用圓環法對油與水的界面張力的試驗方法 |
Test Method for Interfacial Tension of Oil Against Water by the Ring Method (05.01, 10.03) |
| ANSI/ASTM D 972-1997 |
潤滑脂及油的蒸發損失試驗方法 |
Test Method for Evaporation Loss of Lubricating Greases and Oils (05.01) |
| ANSI/ASTM D 974-2001 |
用顏色指示劑滴定法測定中和值的試驗方法 |
Neutralization Number by Color-Indicator Titration, Method of Test for (05.01) |
| ANSI/ASTM D 975-1994 |
柴油機燃料油規范 |
Specification for Diesel Fuel Oils (05.01) |
| ANSI/ASTM D 976-1991 |
餾分燃料的十六烷值指數的計算方法 |
Methods for Calculated Cetane Index of Distillate (05.01) |
| ANSI/ASTM D1067-2002 |
水的酸性和堿性試驗方法 |
(Test Methods for Acidity or Alkalinity of Water ) |
| ANSI/ASTM D1068-2003 |
水中鐵的試驗方法 |
(Test Methods for Iron in Water ) |
| ANSI/ASTM D1093-2004 |
蒸餾殘余物或烴液的酸性試驗方法 |
|
| ANSI/ASTM D1129a-2003 |
水相關術語 |
(Terminology Relating to Water ) |
| ANSI/ASTM D1129a-2004 |
水相關術語 |
|
| ANSI/ASTM D115-2002 |
電絕緣用清漆的試驗方法(10.01) |
(Test method for Varnishes Used for Electrical Insulation (10.01) ) |
| ANSI/ASTM D1160-2003 |
石油產品減壓蒸餾試驗方法 |
(Test Method for Distillation of Petroleum Products at Reduced Pressures (05.01) ) |
| ANSI/ASTM D1179-2004 |
水中氟化物離子的試驗方法 |
|
| ANSI/ASTM D1218-2002 |
液態烴折射率和折射色散的試驗方法(05.01, 10.03) |
(Refractive Index and Refractive Dispersion of Hydrocarbon Liquids, Method of Test for (05.01, 10.03) ) |
| ANSI/ASTM D1250-2003 |
石油測量表指南 |
(Guide for Petroleum Measurement Tables ) |
| ANSI/ASTM D1264-2003 |
測定潤滑脂的水沖洗特性的試驗方法 |
(Test Method for Determining the Water Washout Characteristics of Lubricating Greases ) |
| ANSI/ASTM D1265-2005 |
液化石油氣(LP)取樣的實施規程.人工法 |
|
| ANSI/ASTM D127-2005 |
石油蠟(包括礦脂的)滴落熔點的試驗方法 |
|
| ANSI/ASTM D130-2004 |
用銅片生銹試驗檢查石油產品對銅腐蝕性的試驗方法 |
|
| ANSI/ASTM D1319a-2002 |
用熒光指示劑吸收法在液體石油產品中對烴類的試驗方法 |
(Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption, Test Method for (05.01) ) |
| ANSI/ASTM D1321a-2002 |
石油蠟針入度的試驗方法 |
(Needle Penetration of Petroleum Waxes, Method of Test for (05.01, 15.09) ) |
| ANSI/ASTM D1351-2002 |
電線和電纜用熱塑性聚乙烯絕緣規范 |
(Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable ) |
| ANSI/ASTM D1352-2002 |
電線和電纜用耐臭氧的丁基橡膠絕緣規范 |
(Specification for Ozone-Resisting Butyl Rubber Insulation for Wire and Cable ) |
| ANSI/ASTM D1401-2002 |
石油和合成流體中水的可分離性的試驗方法 |
(Test Method for Water Separability of Petroleum Oils and Synthetic Fluids (05.01) ) |
| ANSI/ASTM D1403-2002 |
用四分之一和二分之一標度的錐度設備測定潤滑脂針入度的試驗方法(05.01) |
(Test Method for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment (05.01) ) |
| ANSI/ASTM D1405-2002 |
航空燃料消耗的凈熱量的估算方法(05.01) |
(Method for Estimation of Net Heat of Combustion of Aviation Fuels (05.01) ) |
| ANSI/ASTM D1429-2003 |
水和鹵水比重的試驗方法 |
(Test Methods for Specific Gravity of Water and Brine ) |
| ANSI/ASTM D1478-2002 |
滾珠軸承潤滑脂的低溫扭矩的試驗方法 |
(Test Method for Low-Temperature Torque of Ball Bearing Greases (05.01) ) |
| ANSI/ASTM D1480-2002 |
用賓厄姆比重計測量粘性材料的密度和相對密度(比重)的試驗方法 |
(TEST Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer (05.01) ) |
| ANSI/ASTM D1481-2002 |
用利普金雙毛細管比重計測量粘性材料的密度和相對密度(比重)的試驗方法 |
(Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer (05.01) ) |
| ANSI/ASTM D1500-2002 |
石油產品的ASTM顏色的試驗方法 |
(Test Method for ASTM Color of Petroleum Products (05.01) ) |
| ANSI/ASTM D1527-2005 |
丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料管材范.表40和80 |
|
| ANSI/ASTM D1552-2003 |
石油產品中硫的試驗方法(高溫法) |
(Sulfur in Petroleum Products (High-Temperature Method), Method of Test for (05.01) ) |
| ANSI/ASTM D156-2002 |
石油產品的賽波特比色試驗方法(賽波特比色計法) |
(Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) (05.01) ) |
| ANSI/ASTM D1623-2003 |
硬質多孔塑料的抗張性和抗拉粘著性的試驗方法 |
(Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics ) |
| ANSI/ASTM D1655-2003 |
航空燃?xì)鉁u輪發動機燃料的規范 |
(Specification for Aviation Turbine Fuels ) |
| ANSI/ASTM D1657-2002 |
用壓力溫差比重計測定輕質烴的密度或相對密度的試驗方法 |
(Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer ) |
| ANSI/ASTM D1675-2003 |
聚四氟乙烯管的試驗方法(10.01) |
(Test Methods for Polytetrafluoroethylene Tubing (10.01) ) |
| ANSI/ASTM D1676-2003 |
膜絕緣磁導線的試驗方法(10.01) |
(Methods of Testing Film-Insulated Magnet Wire (10.01) ) |
| ANSI/ASTM D1677-2002 |
取樣和測試電絕緣用的未處理云母紙的取樣和試驗方法 |
(Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation ) |
| ANSI/ASTM D1679-2002 |
75℃運行的電線和電纜用合成橡膠的耐熱和耐濕絕緣性規范 |
(Specification for Synthetic Rubber Heat- and Moisture-Resisting Insulation for Wire and Cable, 75 Deg C Operation ) |
| ANSI/ASTM D1687-2002 |
水中鉻的測試方法 |
(Test Methods for Chromium in Water ) |
| ANSI/ASTM D1688-2002 |
水中銅的試驗方法 |
(Test Methods for Copper in Water ) |
| ANSI/ASTM D1691-2002 |
水中鋅的試驗方法 |
(Test Methods for Zinc in Water ) |
| ANSI/ASTM D1709-2003 |
用自由落體法測定塑料薄膜抗沖擊的試驗方法 |
(Test Methods for Impact Resistance of Plastic Film by the Free-falling Dart Method ) |
| ANSI/ASTM D1711-2002 |
電絕緣的術語(10.01) |
(Terminology Relating to Electrical Insulation (10.01) ) |
| ANSI/ASTM D1743-2005 |
測定潤滑脂防腐蝕特性的試驗方法 |
|
| ANSI/ASTM D1748-2002 |
在濕度室測定金屬防腐劑的防銹性的試驗方法 |
(Rust Protection by Metal Preservatives in the Humidity Cabinet, Method of Test for (05.01) ) |
| ANSI/ASTM D1785-2003 |
聚氯乙烯(PVC)塑料管規范.表40、80和120 |
(Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 ) |
| ANSI/ASTM D1785a-2004 |
聚氯乙烯塑料管的規范.表40、80、120 |
|
| ANSI/ASTM D1785a-2004 |
聚氯乙烯塑料管的規范.表40、80、120 |
|
| ANSI/ASTM D1796-2004 |
用離心法測定燃油中水和沉積物的試驗方法(實驗室方法) |
|
| ANSI/ASTM D1835-2003 |
液化石油氣規范(05.01) |
(Specification for Liquefied Petroleum (LP) Gases (05.01) ) |
| ANSI/ASTM D1835-2005 |
液化石油氣規范 |
|
| ANSI/ASTM D1837a-2002 |
液化石油氣揮發性的試驗方法 |
(Test Method for Volatility of Liquefied Petroleum (LP) Gases (05.01) ) |
| ANSI/ASTM D1838-2003 |
用液化石油氣測定銅帶腐蝕的試驗方法(05.01,05.05) |
(Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases (05.01, 05.05) ) |
| ANSI/ASTM D1838-2005 |
液化石油(LP)氣銅帶腐蝕試驗方法 |
|
| ANSI/ASTM D1840-2004 |
用紫外線分光光度測定法測定航空渦輪燃料中環烷屬烴的試驗方法(05.01) |
|
| ANSI/ASTM D1840-2004 |
用紫外線分光光度測定法測定航空渦輪燃料中環烷屬烴的試驗方法(05.01) |
(Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry, Method of Test for (05.01) ) |
| ANSI/ASTM D1922-2003 |
用擺動法測定塑料薄膜和薄板耐撕裂擴展的試驗方法(08.01) |
(Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by the Pendulum Method (08.01) ) |
| ANSI/ASTM D1932-2004 |
柔性電絕緣漆耐熱性試驗方法 |
|
| ANSI/ASTM D1971-2002 |
火焰原則吸收法或等離子發射光譜測量法測定金屬樣品的命名和符號規定 |
(Practices for Digestion of Samples for Determination of Metals by Flame Atomic Absorption or Plasma Emission Spectroscopy ) |
| ANSI/ASTM D2007-2003 |
用粘土膠吸收色譜法測定橡膠膨脹劑和加工油以及其他石油衍生油的特性集的試驗方法(05.01) |
(Test Method for Characteristic Groups in Rubber Extender and Processing Oils and other Petroleum Derived Oils by the Clay-Gel Absorption Chromatographic Method (05.01) ) |
| ANSI/ASTM D2104-2003 |
聚乙烯(PE)塑料管規范.表40 |
(Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 ) |
| ANSI/ASTM D2109-2002 |
鹵化有機溶劑及其混合物中不揮發物質的測試方法 |
(Test Method for Nonvolatile Matter in Halogenated Organic Solvents and their Admixtures ) |
| ANSI/ASTM D2148-2002 |
電絕緣用硅膠帶的試驗方法(10.01) |
(Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation (10.01) ) |
| ANSI/ASTM D2158-2004 |
液化石油氣中殘留物的試驗方法 |
|
| ANSI/ASTM D2161-2004 |
運動粘度換算成賽波特通用粘度或賽波特重油粘度的方法 |
|
| ANSI/ASTM D217-2002 |
潤滑脂的圓錐貫入試驗方法 |
(Cone Penetration of Lubricating Grease, Method of Test for (05.01) ) |
| ANSI/ASTM D2219-2002 |
60℃操作時聚氯乙烯電線和電纜絕緣的規范(10.01) |
(Poly(Vinyl Chloride) Insulation for Wire and Cable, 60? Operation, Specification for (10.01) ) |
| ANSI/ASTM D2220-2002 |
操作溫度為75℃時聚氯乙烯電線和電纜的絕緣規范(10.01) |
(Poly(Vinyl Chloride) Insulation for Wire and Cable, 75? Operation, Specification for (10.01) ) |
| ANSI/ASTM D2235-2004 |
ABS塑料管道和配件用液狀粘固劑規范 |
|
| ANSI/ASTM D2239-2003 |
以受控內徑為基準的聚乙烯(PE)塑料管(SIDR-PR)規范 |
(Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter ) |
| ANSI/ASTM D2241-2004 |
聚氯乙烯(PVC)額定壓力管規范 |
(Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) ) |
| ANSI/ASTM D2241-2005 |
聚氯乙烯(PVC)額定壓力管規范(SDR系列) |
|
| ANSI/ASTM D2241b-2004 |
聚氯乙烯壓力管道的規范(SDR系列) |
|
| ANSI/ASTM D2241b-2004 |
聚氯乙烯壓力管道的規范(SDR系列) |
|
| ANSI/ASTM D2272-2002 |
用轉式儲氣瓶測定蒸氣渦輪機油氧化穩定性的連續性的試驗方法(05.01) |
(Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel ) |
| ANSI/ASTM D2274-2004 |
餾出燃料油的氧化穩定性試驗(加速法) |
|
| ANSI/ASTM D2274-2004 |
餾出燃料油的氧化穩定性試驗(加速法) |
(Oxidation Stability of Distillate Fuel Oil (Accelerated Method), Test for (05.01) ) |
| ANSI/ASTM D2290-2004 |
用分離盤法進行環狀或管狀和增強塑料表觀拉伸強度的試驗方法 |
|
| ANSI/ASTM D2305-2002 |
電絕緣用聚合薄膜的試驗方法(94-4,2項)(10.01) |
(Test Methods for Polymeric Films Used for Electrical Insulation (94-4, Item 2) (10.01) ) |
| ANSI/ASTM D2308-2002 |
電線和電纜用熱塑聚乙烯包裝物規范 |
(Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable ) |
| ANSI/ASTM D2321-2004 |
排污水和其它重力流動設備用熱塑性管的地下安裝實施規范 |
|
| ANSI/ASTM D2321-2005 |
排污水和其它重力流動設備用熱塑性管的地下安裝實施規程 |
|
| ANSI/ASTM D2330-2002 |
次甲基藍色活化物質試驗方法 |
(Test Method for Methylene Blue Active Substances ) |
| ANSI/ASTM D2386-2003 |
航空燃料的冰點的試驗方法(05.01) |
(Freezing Point of Aviation Fuels, Method of Test for (05.01) ) |
| ANSI/ASTM D2386-2005 |
航空燃料冷凍點的試驗方法 |
|
| ANSI/ASTM D240-2002 |
用氧彈式量熱計測定液態烴燃料的燃燒熱值的測試方法(05.01) |
(Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter, Method of Test for (05.01) ) |
| ANSI/ASTM D2412-2002 |
測定由平行板負荷的塑料管材外部負荷特征的試驗方法 |
(Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading ) |
| ANSI/ASTM D2447-2003 |
以外徑尺寸為基準的聚乙烯(PE)塑料管規范.表40和80 |
(Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter ) |
| ANSI/ASTM D2466-2002 |
聚氯乙烯塑料管道配件規范,附表40 |
(Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 ) |
| ANSI/ASTM D2466-2005 |
聚氯乙烯(PVC)塑料管道配件規范.表40 |
|
| ANSI/ASTM D2467-2002 |
套管型聚氯乙烯(PVC)塑料管道配件規范,附表80 |
(Specification for Socket-Type Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ) |
| ANSI/ASTM D2467-2004 |
套管型聚氯乙烯(PVC)塑料管道配件規范.表80 |
|
| ANSI/ASTM D2467-2004 |
套管型聚氯乙烯(PVC)塑料管道配件規范.表80 |
|
| ANSI/ASTM D2467-2005 |
套管型聚氯乙烯(PVC)塑料管道配件規范.表80 |
|
| ANSI/ASTM D2500-2002 |
石油濁點的試驗方法(05.01) |
(Test Method for Cloud Point of Petroleum Oils (05.01) ) |
| ANSI/ASTM D2500-2005 |
石油產品始凝點的試驗方法 |
|
| ANSI/ASTM D2502-2004 |
從粘度測量估算石油分子量的方法 |
|
| ANSI/ASTM D2509-2003 |
測量潤滑脂承載能力的試驗方法(05.01) |
(Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method) (05.01) ) |
| ANSI/ASTM D2513a-2003 |
熱塑性燃?xì)鈮毫芗芭浼?guī)范 |
(Specification for Thermoplastic Gas Pressure Pipe Tubing and Fittings ) |
| ANSI/ASTM D2519-2002 |
螺旋形線圈試驗法對電絕緣清漆粘結強度的試驗方法 |
(Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test ) |
| ANSI/ASTM D2526-2002 |
電線和電纜用耐臭氧硅氧烷橡膠絕緣材料的規范 |
(Specification for Ozone-Resisting Silicone Rubber Insulation for Wire and Cable ) |
| ANSI/ASTM D2532-2004 |
低溫靜止后飛機燃?xì)鉁u輪發動機潤滑劑的粘度和粘度變化的試驗方法 |
|
| ANSI/ASTM D2549-2002 |
用淘析色譜法測定高沸點油的有代表性芳香族和非芳香族餾分的分離試驗方法(05.01) |
(Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography (05.01) ) |
| ANSI/ASTM D2564-2002 |
聚氯乙烯塑料管道系統用溶劑粘合劑規范 |
(Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems ) |
| ANSI/ASTM D2564-2004 |
聚氯乙烯塑料管道系統用液狀粘固劑規范 |
|
| ANSI/ASTM D2582-2003 |
塑料薄膜和薄板的耐破洞撕裂擴散的試驗方法(08.02) |
(Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting (08.02) ) |
| ANSI/ASTM D2609-2002 |
聚乙烯塑料管用的塑料插入管配件規范 |
(Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe ) |
| ANSI/ASTM D2622-2003 |
石油產品中硫的試驗方法(X射線光譜法) |
(Test Method for Sulfur in Petroleum Products (X-Ray Spectrographic Method) (05.02) ) |
| ANSI/ASTM D2624-2002 |
含靜態耗散器添加劑的航空餾出油的電導率的試驗方法(05.02) |
(Test Method for Electrical Conductivity of Aviation and Distillate Fuels Containing a Static Dissipator Additive (05.02) ) |
| ANSI/ASTM D2633-2002 |
電線和電纜用熱塑性絕緣體和護套的測試方法 |
(Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable ) |
| ANSI/ASTM D2657-2003 |
聚烯烴管和配件的熱接合實施規范 |
(Practice for Heat Joining of Polyolefin Pipe and Fittings ) |
| ANSI/ASTM D2661-2002 |
丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料排水管、污水管和通風管和配件的規范.表40 |
(Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings ) |
| ANSI/ASTM D2665-2002 |
聚氯乙烯(PVC)塑料排水管、污水管和通風管及配件的規范 |
(Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com