標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM F610/F 610M-2005 |
用熱循環技術評價模塑聚氯乙烯(PVC)塑料管配件質量的試驗方法 |
|
| ANSI/ASTM F645-2002 |
熱塑性水壓管道系統的選材、設計和安裝指南 |
(Guide for Selection, Design, and Installation of Thermoplastic Water Pressure Piping Systems ) |
| ANSI/ASTM F645-2004 |
熱塑性水壓管道系統的選定、設計和安裝指南 |
|
| ANSI/ASTM F656-2002 |
聚氯乙烯塑料管和配件的溶劑膠結接口用打底劑規范 |
(Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings ) |
| ANSI/ASTM F677-2004 |
用于電子和微電子設備的熱固性封裝復合劑的耐液體和油脂的試驗方法 |
|
| ANSI/ASTM F679-2003 |
聚氯乙烯(PVC)大尺寸塑料重力污水管和配件的規范 |
(Specification for Poly (Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings ) |
| ANSI/ASTM F683-2003 |
管道和機械設備用絕熱材料的選擇和應用實施規程 |
(Practice for Selection and Application of Thermal Insulation for Piping and Machinery ) |
| ANSI/ASTM F683-2004 |
管道和機械隔熱的選定和應用實施規程 |
|
| ANSI/ASTM F714-2003 |
以外徑尺寸為基準的聚乙烯(PE)塑料管(SDR-PR)規范 |
(Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter ) |
| ANSI/ASTM F771-2005 |
聚乙烯(PE)熱塑性高壓灌溉管道系統規范 |
|
| ANSI/ASTM F803-2003 |
網球運動員用的護目器規范 |
(Specification for Eye Protectors for Use by Players of Racket Sports ) |
| ANSI/ASTM F842-2004 |
水平推拉門組件抗強力進入的試驗方法 |
|
| ANSI/ASTM F876-2003 |
交聯聚乙烯(PEX)管的規范 |
(Specification for Crosslinked Polyethylene (PEX) Tubing ) |
| ANSI/ASTM F876-2004 |
交聯聚乙烯(PEX)管規范 |
|
| ANSI/ASTM F877-2002 |
交聯聚乙烯(PEX)塑料冷-熱水配水系統的規范 |
(Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems ) |
| ANSI/ASTM F905-2004 |
聚乙烯鞍形熔融接頭合格鑒定的實施規范 |
|
| ANSI/ASTM F910-2004 |
青少年棒球運動員用面部保護罩的規范 |
|
| ANSI/ASTM F913-2002 |
連接塑料管用熱塑彈性密封件(墊圈)規范 |
(Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe ) |
| ANSI/ASTM F914-2003 |
航空人員隔音裝置用聲發射的試驗方法 |
(Test Method for Acoustic Emission for Insulated Aerial Personnel Devices ) |
| ANSI/ASTM F987-2004 |
輕便的中等平甲板支撐物規范 |
|
| ANSI/ASTM F991M-2004 |
泄水孔塞/放泄塞和軸節配件的規范(米制) |
|
| ANSI/ASTM F998-2002 |
船用離心泵規范 |
(Specification for Centrifugal Pump, Shipboard Use ) |
| ANSI/ASTM F998-2004 |
船用離心泵規范 |
|
| ANSI/ATIS 0300007-2005 |
物理網絡源的識別 |
|
| ANSI/ATIS 0632000-2005 |
電信.防高空電磁脈沖(HEMP)的指定電信中心局和類似機構的高空基線電力保護 |
|
| ANSI/AWS A 1.1-2001 |
焊接工業的米制實施規程指南 |
Metric Practice Guide for the Welding Industry |
| ANSI/AWS A 2.4-1998 |
焊接、釬焊和無損檢驗用符號 |
Symbols for Welding, Brazing, and Nondestructive Examination |
| ANSI/AWS A 3.0-2001 |
標準焊接術語和定義 |
Standard Welding Terms and Definitions |
| ANSI/AWS A 4.2M/A 4.2-1997 |
奧氏體和雙奧氏體-鐵素體不銹鋼焊接金屬中δ鐵酸鹽含量用磁儀器的校準程序 |
Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Austenitic-Ferrite Stainless Steel Weld Metal, Procedures for |
| ANSI/AWS A 4.3-1993 |
測定馬氏體、貝氏體和鐵素體鋼電弧焊接金屬中可擴散氫含量的標準方法 |
Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal Produced by Arc Welding |
| ANSI/AWS A 4.4M-2001 |
焊接助熔劑和電焊條助熔劑涂層含水量的測定的標準規程 |
Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings |
| ANSI/AWS A 5.01-1993 |
填充金屬采購指南 |
Filler Metal Procurement Guidelines |
| ANSI/AWS A 5.11/A 5.11M-1997 |
保護金屬極電弧焊接用鎳和鎳合金焊接電極規范 |
Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding, Specification for |
| ANSI/AWS A 5.12/A 5.12M-1998 |
電弧焊接和切割用鎢及鎢合金電極 |
Tungsten and Tungsten Alloy Electrodes for Arc Welding and Cutting |
| ANSI/AWS A 5.17/A 5.17M-1997 |
埋弧焊用碳鋼焊條和助熔劑規范 |
Specification for Carbon Steel Electrodes and Fluxes for Submerged-Arc Welding |
| ANSI/AWS A 5.18-1993 |
氣體保護電弧焊用碳鋼焊條和焊棒 |
Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding |
| ANSI/AWS A 5.19-1992 |
鎂合金焊條和焊棒 |
Magnesium Alloy Welding Electrodes and Rods |
| ANSI/AWS A 5.20-1995 |
助熔劑芯電弧焊用碳鋼焊條規范 |
Carbon Steel Electrodes for Flux Cored Arc Welding, Specification for |
| ANSI/AWS A 5.22-1994 |
助熔劑芯耐腐蝕鉻和鉻鎳鋼制焊條規范 |
Flux Cored Corrosion-Resisting Chromium and Chromium-Nickel Steel Electrodes, Specification for |
| ANSI/AWS A 5.23/A 5.23M-1997 |
埋弧焊用低合金鋼制焊條和助熔劑規范 |
Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding |
| ANSI/AWS A 5.25/A.25M-1997 |
碳和高強度低合金鋼的電渣焊用自耗品規范 |
Specification for Consumables Used for Electroslag Welding of Carbon and High-Strength Low-Alloy Steels |
| ANSI/AWS A 5.26/A 5.26M-1997 |
碳和高強度低合金鋼的氣電焊用自耗品規范 |
Specification for Consumables Used for Electrogas Welding of Carbon and High-Strength Low-Alloy Steels |
| ANSI/AWS A 5.28-1996 |
氣體保護電弧焊用低合金鋼制焊條和焊棒 |
Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding |
| ANSI/AWS A 5.3-1991 |
保護金屬極電弧焊接用鋁和鋁合金電極 |
Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding |
| ANSI/AWS A 5.4-1992 |
保護金屬極電弧焊接用不銹鋼電焊電極 |
Stainless Steel Welding Electrodes for Shielded Metal Arc Welding |
| ANSI/AWS A 5.5-1996 |
保護金屬極電弧焊接用低合金鋼電極規范 |
Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding |
| ANSI/AWS A 5.8-1992 |
釬焊填充金屬規范 |
Specification for Brazing Filler Metals |
| ANSI/AWS A 5.9-1993 |
耐腐蝕鉻及鉻鎳鋼裸焊條和復合金屬空心和綜合電弧焊條和焊棒 |
Corrosion-Resisting Chromium and Chromium-Nickel Steel Bare and Composite Metal Cored and Stranded Arc Welding Electrodes and Welding Rods |
| ANSI/AWS A 9.1-1992 |
計算機化材料性能和無損檢驗數據庫中電弧焊的描述指南 |
Guide for Describing Arc Welds in Computerized Material Property and Nondestructive Examination Databases |
| ANSI/AWS A 9.2-1992 |
計算機化數據庫中電弧焊接材料性能和無損檢驗數據的記錄指南 |
Guide for Recording Arc Weld Material Property and Nondestructive Examination Data in Computerized Databases |
| ANSI/AWS A5.1/A 5.1M-2003 |
電弧焊接碳鋼涂料焊條規范 |
(Carbon Steel Covered Arc-Welding Electrodes, Specification for ) |
| ANSI/AWS A5.11-97/A 5.11M-2005 |
氣體保護金屬極電弧焊用鎳和鎳合金電焊條規范 |
|
| ANSI/AWS A5.14/A 5.14M-2005 |
鎳和鎳合金裸焊條和焊棒規范 |
|
| ANSI/AWS A5.16/A 5.16M-2003 |
鈦和鈦合金電極和焊條規范 |
(Specification for Titanium and Titanium Alloy Welding Electrodes and Rods ) |
| ANSI/AWS A5.22-2005 |
助溶劑芯弧焊用不銹鋼焊條和鎢電極惰性氣體保護焊用不銹鋼助溶劑芯焊條規范 |
|
| ANSI/AWS A5.24/A 5.24M-2004 |
鋯和鋯合金焊接電極和焊條規范 |
|
| ANSI/AWS A5.28/A 5.28M-2005 |
氣體保護電弧焊用低合金鋼焊條和焊棒 |
|
| ANSI/AWS A5.8/A 5.8M-2004 |
釬焊填充金屬的規范 |
|
| ANSI/AWS B 2.1-1-016-1993 |
碳鋼的保護金屬電弧焊的焊接程序規范(WPS)(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚,E7018,焊接或PWHT條件下 |
Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E7018, As-Welded or PWHT Condition |
| ANSI/AWS B 2.1-1-017-1993 |
碳鋼的保護金屬電弧焊的焊接程序規范(WPS)(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚,E6010,焊接或PWHT條件下 |
Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E6010, As-Welded or PWHT Condition |
| ANSI/AWS B 2.1-1-018-1993 |
碳鋼的自保護助熔劑芯電弧焊的焊接程序規范(WPS)(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚,E7XT-7,E7XT-8,E7XT-11,E7XT-G,焊接條件下 |
Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E7XT-7, E7XT-8, E7XT-11, and E7XT-G As-Welded Condition |
| ANSI/AWS B 2.1-1-019-1993 |
碳鋼的二氧化碳保護助熔劑芯電弧焊的焊接程序規范(WPS)(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚,E70T-1,E71T-1,焊接條件下 |
Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E70T-1 and E71T-1 , As-Welded Condition |
| ANSI/AWS B 2.1-1-020-1993 |
碳鋼的75%A/25%CO2保護助熔劑芯電弧焊的焊接程序規范(WPS)(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚,E70T-1,E71T-1,焊接或PWHT條件下 |
Welding Procedure Specification (WPS) for 75% A/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E70T-1 and E71T-1 As-Welded or PWHT Condition |
| ANSI/AWS B 2.1-1-021-1993 |
氣體鎢電弧焊和碳鋼的保護金屬電弧焊的焊接程序規范(WPS)(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚,ER70S-2,E7018,焊接或PWHT條件下 |
Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, ER70S-2 and E7018 As-Welded or PWHT Condition |
| ANSI/AWS B 2.1-1-022-1993 |
碳鋼的保護金屬電弧焊的焊接程序規范(WPS)(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚,E6010(垂直向上)及E7018,焊接或PWHT條件下 |
Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E6010 (vertical uphill) followed by E7018, As-Welded or PWHT Condition |
| ANSI/AWS B 2.1-1-026-1993 |
碳鋼的保護金屬電弧焊的焊接程序規范(WPS)(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚,E6010(垂直向下)及E7018,焊接或PWHT條件下 |
Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E6010 (vertical downhill) followed by E7018, As-Welded or PWHT Condition |
| ANSI/AWS B 2.1-1-027-1998 |
碳鋼的自保護助熔劑芯電弧焊的焊接程序規范(WPS)(M-1/P-1/S-1,1或2組)1/8到3/4英寸厚,E71T-11,焊接條件下 |
Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2) 1/8 through 3/4 inch Thick, E71T-11 As-Welded Condition |
| ANSI/AWS B 2.1-1-201-1996 |
主要用于管道的在焊接條件下(M-1/P-1/S-1,1或2組)1/8到3/4英寸厚、E6010(垂直向上)及E7018(垂直向上)碳鋼的保護金屬電弧焊的標準焊接程序規范(WPS) |
|
| ANSI/AWS B 2.1-1-202-1996 |
主要用于管道的在焊接條件下(M-1/P-1/S-1,1或2組)1/8到3/4英寸厚、E6010(垂直向下)及E7018(垂直向上)碳鋼的保護金屬電弧焊的標準焊接程序規范(WPS) |
|
| ANSI/AWS B 2.1-1-203-1996 |
主要用于管道的在焊接條件下(M-1/P-1/S-1,1或2組)1/8到3/4英寸厚、E6010(垂直向上)碳鋼的保護金屬電弧焊的標準焊接程序規范(WPS) |
Standard Welding Procedure Specification (WPS) for Shieldied Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 though 3/4 inch Thick, E6010 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B 2.1-1-204-1996 |
主要用于管道的在焊接條件下(M-1/P-1/S-1,1或2組)1/8到3/4英寸厚、E6010碳鋼的保護金屬電弧焊的標準焊接程序規范(WPS) |
|
| ANSI/AWS B 2.1-1-205-1996 |
主要用于管道的在焊接或PWHT條件下(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、E6010(垂直向上)及E7018(垂直向上)碳鋼的保護金屬電弧焊的標準焊接程序規范(WPS) |
|
| ANSI/AWS B 2.1-1-206-1996 |
主要用于管道的在焊接或PWHT條件下(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、E6010(垂直向下)及E7018(垂直向上)碳鋼的保護金屬電弧焊的標準焊接程序規范(WPS) |
|
| ANSI/AWS B 2.1-1-207-1996 |
主要用于管道的在焊接或PWHT條件下(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、ER70S-2碳鋼的氣體保護鎢極弧焊的標準焊接程序規范(WPS) |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2, As Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B 2.1-1-208-1996 |
主要用于管道的在焊接或PWHT條件下(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、E7018碳鋼的保護金屬電弧焊的標準焊接程序規范(WPS) |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P -1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E7018, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B 2.1-1-209-1996 |
主要用于管道的在焊接或PWHT條件下(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、ER70S-2及E7018碳鋼的氣體保護鎢極弧焊和保護金屬電弧焊的標準焊接程序規范(WPS) |
|
| ANSI/AWS B 2.1-1-210-1996 |
主要用于管道的在焊接或PWHT條件下(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、INMS-1和ER70S-2碳鋼的帶有自耗電極頭的氣體保護鎢極弧焊的標準焊接程序規范(WPS) |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B 2.1-1-211-1996 |
主要用于管道的在焊接或PWHT條件下(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、INMS-1和ER70S-2及E7018碳鋼的帶有自耗電極頭的氣體保護鎢極弧焊及保護金屬電弧焊的標準焊接程序規范(WPS) |
|
| ANSI/AWS B 2.1-4-217-1999 |
鉻鉬鋼的氣體保護鎢極弧焊標準焊接程序規范(M-4/P-4/S-4,1或2組)ER 80S-B2.在焊接條件下1/8到1/2英寸厚或在PWHT條件下1/8到3/4英寸厚.主要用于管道. |
|
| ANSI/AWS B 2.1-4-219-1999 |
氣體保護鎢極弧焊以及鉻鉬鋼的氣體保護鎢極弧焊標準焊接程序規范(M-4/P-4/S-4,1或2組).在焊接條件下1/8到12/2英寸厚或在PWHT條件下ER 80S-B2,E 8018-B2,1/8到1/1/2英寸厚.主要用于管道 |
|
| ANSI/AWS B 2.1-4-221-1999 |
氣體保護鎢極弧焊(自耗嵌入式焊縫根部)以及鉻鉬鋼的保護金屬電弧焊標準焊接程序規范(M-4/P-4/S-4,1或2組).在焊接條件下1/8到1/2英寸厚或在PWHT條件下IN515,ER 80S-B2,E 8018-B2,1/8到1-1/2英寸厚.主要用于管道 |
|
| ANSI/AWS B 2.1-5A-222-1999 |
鉻鉬鋼的氣體保護鎢極弧焊標準焊接程序規范(M-5A或P-5A).在焊接條件下ER 90S-BS,1/8到1/2英寸厚或在PWHT條件下1/8到3/4英寸厚.主要用于管道 |
Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) ER90S-B3 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick, PWHT Condition, Primarily Pipe Application |
| ANSI/AWS B 2.1-5A-223-1999 |
鉻鉬鋼的保護金屬電弧焊標準焊接程序規范(M-5A或P-5A).在焊接條件下ER 9018-BS,1/8到1/2英寸厚或在PWHT條件下1/8到1-1/2英寸厚.主要用于管道 |
Standard Welding Procedure Specification (WPS) Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) ER9018-B3 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 1-1/2-in. Thick, PWHT Condition, Primarily Pipe Application |
| ANSI/AWS B 2.1-5A-224-1999 |
氣體保護鎢極弧焊以及鉻鉬鋼的保護金屬電弧焊標準焊接程序規范(M-5A或P-5A).在焊接條件下1/8到1/2英寸厚或在PWHT條件下ER 90S-B3,E 9018-B3,1/8到1-1/2英寸厚.主要用于管道 |
|
| ANSI/AWS B 2.1-5A-226-1999 |
氣體保護鎢極弧焊(自耗嵌入式焊縫根部)以及鉻鉬鋼的保護金屬電弧焊標準焊接程序規范(M-5A或P-5A).在焊接條件下1/8到1/2英寸厚或在PWHT條件下IN521,ER 90S-B3,E 9018-B3,1/8到1-1/2英寸厚.主要用于管道 |
|
| ANSI/AWS B 2.1-8-023-1993 |
在焊接條件下(M-8/P-8/S-8,1組)1/8到1-1/2英寸厚奧氏體不銹鋼的保護金屬電弧焊的標準焊接程序規范(WPS) |
Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch thick, As-Welded Condition |
| ANSI/AWS B 2.1-8-024-1993 |
在焊接條件下(M-8/P-8/S-8,1組)1/8到1-1/2英寸厚奧氏體不銹鋼的氣體保護鎢極弧焊的標準焊接程序規范(WPS) |
Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch thick, As-Welded Condition |
| ANSI/AWS B 2.1-8-025-1993 |
在焊接條件下(M-8/P-8/S-8,1組)1/8到1-1/2英寸厚奧氏體不銹鋼的氣體保護鎢極弧焊及保護金屬電弧焊的標準焊接程序規范(WPS) |
Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, As-Welded Condition |
| ANSI/AWS B 2.1-8-212-1997 |
主要用于管道的在焊接條件下(M-8/P-8/S-8,1組)1/8到1-1/2英寸厚ERXX奧氏體不銹鋼的氣體保護鎢極弧焊的標準焊接程序規范(WPS) |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick ERXX, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B 2.1-8-213-1997 |
主要用于管道的在焊接條件下(M-8/P-8/S-8,1組)1/8到1-1/2英寸厚E3X-XX奧氏體不銹鋼的保護金屬電弧焊的標準焊接程序規范(WPS) |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick E3XX-XX, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B 2.1-8-214-1997 |
主要用于管道的在焊接條件下(M-8/P-8/S-8,1組)1/8到1-1/2英寸厚ER3XX及E3X-XX奧氏體不銹鋼的氣體保護鎢極弧焊及保護金屬電弧焊的標準焊接程序規范(WPS) |
|
| ANSI/AWS B 2.1-8-215-1998 |
在焊接條件下(M-8/P-8/S-8,1組)1/8到1-1/2英寸厚IN3XX及ER3XX奧氏體不銹鋼的帶自耗電極頭的氣體保護鎢極弧焊的標準焊接程序規范(WPS) |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 Inch Thick IN3XX and ER3XX, As-Welded Condition |
| ANSI/AWS B 2.1-8-216-1998 |
在焊接條件下(M-8/P-8/S-8,1組)1/8到1-1/2英寸厚IN3XX及ER3XX及E3XX-XX奧氏體不銹鋼的帶自耗電極頭的氣體保護鎢極弧焊及保護金屬電弧焊的標準焊接程序規范(WPS) |
|
| ANSI/AWS B 2.1.011-1991 |
在焊接條件下、有或沒有墊板、10到18尺度鍍鋅鋼保護金屬電弧焊的標準焊接程序規范(WPS) |
Standard Welding Procedure Specification - Shielded Metal Arc Welding of Galvanized Steel, 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B 2.1.012-1991 |
在焊接條件下、有或沒有墊板、10到18尺度(M-1,1組)碳鋼保護金屬電弧焊的標準焊接程序規范(WPS) |
Standard Welding Procedure Specification - Shielded Metal Arc Welding of Carbon Steel (M-1, Group 1), 10 through 18 Gage in the as-Welded Condition, with or without Backing |
| ANSI/AWS B 2.1.013-1991 |
在焊接條件下、有或沒有墊板、10到18尺度(M-8/P-8)奧氏體不銹鋼保護金屬電弧焊的標準焊接程序規范(WPS) |
Standard Welding Procedure Specification - Shielded Metal Arc Welding of Austenitic - Stainless Steel (M-8/P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B 2.1.014-1991 |
在焊接條件下、有或沒有墊板、10到18尺度(M-1到M-8/P-8)奧氏體不銹鋼保護金屬電弧焊的標準焊接程序規范(WPS) |
Standard Welding Procedure Specification - Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B 2.1.015-1991 |
在焊接條件下、有或沒有墊板、10到18尺度(M-22/P-22)鋁氣體保護鎢極弧焊的標準焊接程序規范(WPS) |
Standard Welding Procedure Specification - Gas Tungsten Arc Welding of Aluminum (M-22 or P-22), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B 5.16-2001 |
焊接工程師資格認可規范 |
Specification for the Qualification of Welding Engineers |
| ANSI/AWS B 5.17-2000 |
焊接加工人員資格規范 |
Specification for the Qualification of Welding Fabricators |
| ANSI/AWS B 5.2-2001 |
焊接檢驗專業人員和焊接檢驗員助理資格規范 |
Specification for the Qualification of Welding Inspector Specialists and Welding Inspector Assistants |
| ANSI/AWS B 5.9-2000 |
焊接監督人員資格規范 |
Specification for the Qualification of Welding Supervisor |
| ANSI/AWS B2.1-1-016-2005 |
在焊接或PWHT條件下1/8到1-1/2英尺厚E7018碳鋼的保護金屬電弧焊的標準焊接程序規范(WPS)(M-1/P-1/S-1, 1或2組) |
|
| ANSI/AWS B2.1-1-017-2005 |
在焊接或PWHT條件下1/8到1-1/2英尺厚E6010碳鋼的保護金屬電弧焊的標準焊接程序規范(WPS)(M-1/P-1/S-1, 1或2組) |
|
| ANSI/AWS B2.1-1-018-2005 |
在焊接條件下1/8到1-1/2英尺厚E71T-8碳鋼的自保護助溶劑芯電弧焊的標準焊接程序規范(WPS)(M-1/P-1/S-1, 1或2組) |
|
| ANSI/AWS B2.1-1-019-2005 |
在焊接條件下1/8到1-1/2英尺厚E70T-1和E71T-1碳鋼的CO2保護助溶劑芯電弧焊的標準焊接程序規范(WPS)(M-1/P-1/S-1, 1或2組) |
|
| ANSI/AWS B2.1-1-020-2005 |
在焊接或PWHT條件下1/8到1-1/2英尺厚E70T-1和E71T-1碳鋼的75%Ar/25%CO2保護助溶劑芯電弧焊的標準焊接程序規范(WPS)(M-1/P-1/S-1, 1或2組) |
|
| ANSI/AWS B2.1-1-021-2005 |
在焊接或PWHT條件下1/8到1-1/2英尺厚ER70S-2和E7018碳鋼的保護金屬電弧焊和鎢電極惰性氣體保護電弧焊的標準焊接程序規范(WPS)(M-1/P-1/S-1, 1或2組) |
|
| ANSI/AWS B2.1-1-022-2005 |
在焊接或PWHT條件下1/8到1-1/2英尺厚E7018和E6010(垂直上升)碳鋼的保護金屬電弧焊的標準焊接程序規范(WPS)(M-1/P-1/S-1, 1或2組) |
|
| ANSI/AWS B2.1-1-026-2005 |
在焊接或PWHT條件下1/8到1-1/2英尺厚E7018和E6010(垂直下降)碳鋼的保護金屬電弧焊的標準焊接程序規范(WPS)(M-1/P-1/S-1, 1或2組) |
|
| ANSI/AWS B2.1-1/8-227-2002 |
利用輕量級便攜式儀器測量立體聲播放系統震動衰減特性的試驗方法 |
(Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch thick, ER309, As-Welded Condition, Primarily Pip |
| ANSI/AWS B2.1-1/8-228-2002 |
奧氏體不銹鋼屏蔽金屬電弧焊(從M-1/P-1/S-1,組1或組2焊接到M-8/P-8/S-8, 組1)1/8到1-1/2英寸厚,ER309-15、1 |
(Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309-15, 16 or, 17, As-Welded Condition, Primari |
| ANSI/AWS B2.1-1/8-229-2002 |
碳鋼到奧氏體鋼氣體鎢電弧焊(從M-1/P-1/S-1,組1或組2焊接到M- 8/P-8/S-8, 組1)1/8到1-1/2英寸厚ER309、ER30 |
(Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309 and E309-15, 16, or 17, As-Welded Co |
| ANSI/AWS B2.1-1/8-230-2002 |
氣體保護鎢極弧焊的標準焊接程序規范(WPS),可熔嵌入根部的,碳鋼到奧氏體鋼(M-1/P-1/S-1, 組 1 和 2 焊到 M- |
(Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch thick, IN309 and |
| ANSI/AWS B2.1-1/8-231-2002 |
帶可熔嵌入焊條的碳鋼到奧氏體鋼氣體鎢電弧焊(從M-1/P-1/S-1,組1或組2焊接到M- 8/P-8/S-8, 組1)1/8到1-1/2 |
(Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, Followed by Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through |
| ANSI/AWS B2.1-8-023-2005 |
在焊接條件下1/8到1-1/2英尺厚奧氏體不銹鋼的保護金屬電弧焊的標準焊接程序規范(WPS)(M-8/P-8/S-8,1組) |
|
| ANSI/AWS B5.1-2003 |
焊接檢驗員的資格鑒定規范 |
(Specification for the Qualification of Welding Inspectors ) |
| ANSI/AWS B5.14-2002 |
焊接銷售代表的資格鑒定規范 |
(Specification for the Qualification of Welding Sales Representatives ) |
| ANSI/AWS B5.15-2003 |
X射線照相詮釋者資格鑒定規范 |
(Specification for the Qualification of Radiographic Interpreters ) |
| ANSI/AWS B5.17-2004 |
焊接加工人員資格鑒定規范 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com