標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM D2683-2004 |
限定外徑的聚乙烯管用套節型聚乙烯配件規范 |
|
| ANSI/ASTM D2699-2003 |
用研究法測定發動機燃料爆燃特性的試驗(05.04) |
(Motor Fuels by the Research Method, Test for Knock Characteristics of (05.04) ) |
| ANSI/ASTM D2699-2004 |
用研究法測定機動車燃料的抗爆特性 |
|
| ANSI/ASTM D2699a-2004 |
火花點燃式發動機燃料的辛烷值研究的試驗方法 |
|
| ANSI/ASTM D2700-2004 |
火花點火發動機燃料的發動機辛烷值的試驗方法 |
|
| ANSI/ASTM D2700-2004 |
火花點火發動機燃料的發動機辛烷值的試驗方法 |
(Test Method for Motor Octane Number of Spark-ignition Engine Fuel ) |
| ANSI/ASTM D2700b-2004 |
火花點燃式發動機燃料的發動機辛烷值的試驗方法 |
|
| ANSI/ASTM D2729-2003 |
聚氯乙烯(PVC)污水管及配件規范 |
(Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings ) |
| ANSI/ASTM D2737-2003 |
聚乙烯塑料管規范 |
(Specification for Polyethylene (PE) Plastic Tubing ) |
| ANSI/ASTM D2749-2002 |
塑料管配件的尺寸表示符號 |
(Symbols for Dimensions of Plastic Pipe Fittings ) |
| ANSI/ASTM D2756-2002 |
電絕緣清漆重量損失的測試方法 |
(Test Method for Weight Loss of Electrical Insulating Varnishes ) |
| ANSI/ASTM D2782-2002 |
潤滑液耐特壓特性的測量方法(泰姆肯試驗方法)(05.02) |
(Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method), Method for (05.02) ) |
| ANSI/ASTM D2783-2003 |
潤滑液極壓特性測量的試驗方法(四球法) |
(Test Method for Measurement of Extreme-pressure Properties of Lubricating Fluids Four-ball Method ) |
| ANSI/ASTM D2837-2004 |
獲得熱塑性管道材料靜水壓設計基數的試驗方法 |
|
| ANSI/ASTM D2859-2002 |
加工的織物地板覆蓋物材料的燃燒特性試驗方法 |
(Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials ) |
| ANSI/ASTM D2859-2004 |
精制紡織地板覆蓋物著火特性試驗方法 |
|
| ANSI/ASTM D2880-2003 |
燃氣輪機燃料油規范(05.02) |
(Gas Turbine Fuel Oils, Specification for (05.02) ) |
| ANSI/ASTM D2881-2003 |
金屬加工液和相關材料的分類(05.02) |
(Classification of Metal Working Fluids and Related Materials ) |
| ANSI/ASTM D2885-2003 |
使用在線分析儀測定辛烷值的研究法和馬達法(05.04) |
(Research and Motor Method Octane Ratings Using On-Line Analyzers, Test Method for (05.04) ) |
| ANSI/ASTM D2887-2004 |
用氣相色譜法測定石油餾分沸騰范圍分布的試驗方法 |
(Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography ) |
| ANSI/ASTM D2887b-2004 |
氣相色譜法測定石油餾份的沸騰范圍分布的試驗方法 |
|
| ANSI/ASTM D2892-2004 |
原油的蒸餾方法(15理論板柱)(05.02) |
|
| ANSI/ASTM D2892-2004 |
原油的蒸餾方法(15理論板柱)(05.02) |
(Distillation of Crude Petroleum (15 Theoretical Plate Column), Method for (05.02) ) |
| ANSI/ASTM D2893-2003 |
極壓潤滑油氧化特性的試驗方法 |
(Test Method for Oxidation Characteristics of Extreme Pressure Lubricating Oils ) |
| ANSI/ASTM D2893-2004 |
超高壓潤滑油的氧化特性的試驗方法 |
|
| ANSI/ASTM D2896-2004 |
用電勢高氯酸滴定法測定石油產品總堿值的試驗方法(05.02) |
|
| ANSI/ASTM D2896-2004 |
用電勢高氯酸滴定法測定石油產品總堿值的試驗方法(05.02) |
(Total Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration, Test Method for (05.02) ) |
| ANSI/ASTM D2903-2003 |
電絕緣用交鏈氯化聚烯烴熱縮管規范 |
(Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation ) |
| ANSI/ASTM D2972-2003 |
水中砷測定方法 |
(Test Methods for Arsenic in Water ) |
| ANSI/ASTM D2983-2004 |
用Brookfield粘度計測定機動車試驗液體潤滑劑的低溫粘度的試驗方法 |
|
| ANSI/ASTM D2983a-2002 |
用布魯克非爾德度粘度計測量機動車液體潤滑劑低溫粘度的試驗方法 |
(Low-Temperature Viscosity of Automotive Test Fluid Lubricants Measured by Brookfield Viscometer, Method of Test for (05.02) ) |
| ANSI/ASTM D2989-2002 |
鹵化有機溶劑及其添加劑的酸堿性的試驗方法 |
(Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and their Admixtures ) |
| ANSI/ASTM D3004-2002 |
擠壓熱固和熱塑性半導體和絕緣護套規范(10.02) |
(Specification for Extruded Thermosetting and Thermoplastic Semi-Conducting Conductor and Insulation Shields (10.02) ) |
| ANSI/ASTM D3016-2003 |
液體排組色譜法術語和關聯的使用的實施規程 |
(Practice for Use of Liquid Exclusion Chromatography Terms and Relationships ) |
| ANSI/ASTM D3032-2003 |
連接線絕緣的試驗方法(10.02) |
(Hookup Wire Insulation, Test Method for (10.02) ) |
| ANSI/ASTM D3032-2004 |
連接線絕緣的試驗方法 |
|
| ANSI/ASTM D3034-2004 |
PSM 型聚氯乙烯排水管材和管件的規范 |
|
| ANSI/ASTM D3035-2003 |
以受控外徑為基準的聚乙烯塑料管(SPR-PR)規范 |
(Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter ) |
| ANSI/ASTM D3082-2003 |
水中硼的試驗方法 |
(Test Method for Boron In Water ) |
| ANSI/ASTM D3117-2002 |
餾出燃料的蠟的外觀點的試驗方法(05.02) |
(Test Method for Wax Appearance Point of Distillate Fuels (05.02) ) |
| ANSI/ASTM D3120a-2003 |
用氧化微庫侖分析法測定輕質液態石油烴類中硫的痕量的試驗方法 |
(Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry, Method of Test for (05.02) ) |
| ANSI/ASTM D3138-2002 |
丙烯腈-丁二烯-苯乙烯共聚物管及配件和聚氯乙烯無壓管道系統構件之間轉換接頭用溶劑粘結劑規范 |
(Specification for Solvent Cements for Transition Joints between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components ) |
| ANSI/ASTM D3138-2004 |
丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯無壓管道系統構件之間轉換接頭用液狀粘固劑規范 |
|
| ANSI/ASTM D3138-2004 |
丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯無壓管道系統構件之間轉換接頭用液狀粘固劑規范 |
|
| ANSI/ASTM D3223-2002 |
水中整體水銀試驗方法 |
(Test Method for Total Mercury in Water ) |
| ANSI/ASTM D3227-2004 |
汽油、煤油、航空渦輪和餾出燃料中硫醇含量的試驗方法(電勢滴定法) |
|
| ANSI/ASTM D3228-2004 |
用改良的基耶達法測定潤滑油中總氮量的試驗方法(05.02) |
|
| ANSI/ASTM D3228-2004 |
用改良的基耶達法測定潤滑油中總氮量的試驗方法(05.02) |
(Total Nitrogen in Lubricating Oils by Modified Kjeldahl Method, Method of Test for (05.02) ) |
| ANSI/ASTM D3230-2005 |
電勢滴定法測定原油中鹽的試驗方法 |
|
| ANSI/ASTM D3231-2002 |
測定汽油中磷的試驗方法(05.02) |
(Phosphorus in Gasoline, Method of Test for (05.02) ) |
| ANSI/ASTM D3235-2002 |
石蠟中溶劑萃取物,(05.02)的試驗方法 |
(Solvent Extractables in Petroleum Waxes, Method of Test for (05.02) ) |
| ANSI/ASTM D3237-2002 |
用原子吸收光譜測定法測定汽油中鉛含量的試驗方法(05.02) |
(Lead in Gasoline by Atomic Absorption Spectrometry, Method of Test for (05.02) ) |
| ANSI/ASTM D3241-2004 |
測定航空渦輪燃料熱氧化穩定性的試驗方法(JFTOT程序) |
|
| ANSI/ASTM D3241-2005 |
測定航空渦輪機燃料熱氧化穩定性的試驗方法(JFTOT程序) |
|
| ANSI/ASTM D3241a-2002 |
航空燃氣渦輪機燃料熱氧化穩定性的試驗方法(JFTOT程序) |
(Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) (05.02) ) |
| ANSI/ASTM D3245-2003 |
工業燃料油可泵性的試驗方法(05.02) |
(Test Method for Pumpability of Industrial Fuel Oils (05.02) ) |
| ANSI/ASTM D3251-2004 |
薄膜絕緣磁性金屬絲用電絕緣清漆的熱老化特性的試驗方法 |
|
| ANSI/ASTM D3262-2003 |
增強塑料砂漿污水管規范 |
(Specification for Reinforced Plastic Mortar Sewer Pipe (08.04) ) |
| ANSI/ASTM D3262-2004 |
增強塑料砂漿排污水管規范 |
|
| ANSI/ASTM D3263-2003 |
除去水成沉積物用溶劑系統腐蝕性的試驗方法 |
(Test Methods for Corrosivity of Solvent Systems for Removing Water-Formed Deposits ) |
| ANSI/ASTM D3288-2003 |
電磁線漆包用漆的試驗方法(10.02) |
(Test Methods for Magnet-Wire Enamels (10.02) ) |
| ANSI/ASTM D3294-2003 |
聚四氟乙烯樹脂模制薄板材和模制基礎型材規范 |
(Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes ) |
| ANSI/ASTM D3338-2004 |
航空燃料的燃燒熱估算方法 |
|
| ANSI/ASTM D3339-2002 |
用半微量彩色指示劑滴定法測定酸度總值的試驗方法(05.02) |
(Total Acid Number by Semi-Micro Color Indicator Titration, Method of Test for (05.02) ) |
| ANSI/ASTM D3353-2004 |
纖維絕緣磁性金屬線的試驗方法 |
|
| ANSI/ASTM D3380-2003 |
塑料片基微波電路基片的相對透電率(介電常數)和耗散因數的試驗方法 |
(Test Method for Relative Permittivity (dielectric Constant) and Dissipation Factor of Plastic-based Microwave Circuit Substrates ) |
| ANSI/ASTM D341-2004 |
粘度.液態石油產品的溫度圖 |
|
| ANSI/ASTM D3427-2004 |
石油氣泡分離時間的試驗方法(05.02) |
|
| ANSI/ASTM D3427-2004 |
石油氣泡分離時間的試驗方法(05.02) |
(Gas Bubble Separation Time of Petroleum Oils, Test Method for (05.02) ) |
| ANSI/ASTM D3485-2002 |
預先裝配導線和電纜用可盤旋光滑壁聚乙烯導管規范 |
(Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable ) |
| ANSI/ASTM D3517-2003 |
“纖維玻璃“(玻璃纖維增強熱固性樹脂)規范 |
(Specification for “Fiberglass“ (Glass-Fiber-Reinforced Thermosetting Resin)(08.04)) |
| ANSI/ASTM D3517-2004 |
纖維玻璃(玻璃纖維增強熱固性樹脂)規范 |
|
| ANSI/ASTM D3520-2004 |
熱處理液體淬火時間的試驗方法.磁性冷卻速度試驗器法 |
|
| ANSI/ASTM D3527-2002 |
機動車輪軸承潤滑脂的壽命性能的試驗方法(05.02) |
(Test Method for Life Performance of Automotive Wheel Bearing Greases ) |
| ANSI/ASTM D3557-2002 |
水中鎘試驗方法 |
(Test Methods for Cadmium in Water ) |
| ANSI/ASTM D3559-2003 |
水中鉛的試驗方法 |
(Test Methods for Lead in Water ) |
| ANSI/ASTM D3561-2002 |
用離子吸收光譜法測試微咸水、海水和鹽水中的鋰、鉀和鈉離子的方法 |
(Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry ) |
| ANSI/ASTM D3590-2002 |
水中克耶達(Kjeldahl)氮總含量的試驗方法 |
(Test Methods for Total Kjeldahl Nitrogen in Water ) |
| ANSI/ASTM D3645-2003 |
水中鈹?shù)脑囼灧椒?/td>
| (Test Methods for Beryllium in Water ) |
| ANSI/ASTM D3648-2003 |
放射性測量規程 |
(Practices for the Measurement of Radioactivity ) |
| ANSI/ASTM D3651-2002 |
微咸水、海水和鹽水中的鋇離子的測試方法 |
(Test Method for Barium in Brackish Water, Seawater, and Brines ) |
| ANSI/ASTM D3664-2004 |
電氣設備中電容器用雙軸取向的聚乙烯對苯二酸脂薄膜規范 |
|
| ANSI/ASTM D3679-2003 |
硬質聚氯乙烯擋板規范 |
(Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding (08.04) ) |
| ANSI/ASTM D3679-2004 |
硬質聚氯乙烯擋板規范 |
|
| ANSI/ASTM D3699-2003 |
煤油規范(05.02) |
(Specification for Kerosine ) |
| ANSI/ASTM D3699-2005 |
煤油規范 |
|
| ANSI/ASTM D3712-2005 |
用液相色譜法分析油溶性石油硫酸鹽的試驗方法 |
|
| ANSI/ASTM D3753-2005 |
玻璃纖維增強聚酯檢查孔規范 |
|
| ANSI/ASTM D3754-2003 |
纖維玻璃污水管和工業用壓力管規范(08.04) |
(Specification for Fiberglass Sewer and Industrial Pressure Pipe (08.04) ) |
| ANSI/ASTM D3754-2004 |
纖維玻璃污水管和工業用壓力管規范 |
|
| ANSI/ASTM D381-2003 |
用射流蒸發法測定燃料中原在膠的試驗方法 |
(Existent Gum in Fuels by Jet Evaporation, Method of Test for (05.01) ) |
| ANSI/ASTM D3828-2002 |
用Setaflash閉合試驗機測定閃點的試驗(05.02) |
(Flash Point by Setaflash Closed Tester, Test for (05.02) ) |
| ANSI/ASTM D3828-2005 |
用小型閉杯試驗器測定閃點的試驗方法 |
|
| ANSI/ASTM D3829-2002 |
機油的邊界泵送溫度的預測試驗(05.02) |
(Predicting the Borderline Pumping Temperature of Engine Oil, Test for (05.02) ) |
| ANSI/ASTM D3839-2002 |
柔性增強熱固性樹脂管和增強塑料砂漿管的地下安裝慣例(08.04) |
(Practice for Underground Installation of Flexible Reinforced Thermosetting Resin Pipe and Reinforced Plastic Mortar Pipe (08.04) ) |
| ANSI/ASTM D3865-2002 |
水中钚的試驗方法 |
(Test Method for Plutonium in Water ) |
| ANSI/ASTM D3866-2002 |
水中銀的試驗方法 |
(Test Methods for Silver in Water ) |
| ANSI/ASTM D3867-2004 |
水中亞硝-亞硝測定方法 |
|
| ANSI/ASTM D3868-2004 |
微咸水、海水和鹽水中氟離子的試驗方法 |
|
| ANSI/ASTM D3869-2004 |
微咸水、海水和鹽水中碘化物和溴化物離子的試驗方法 |
|
| ANSI/ASTM D3875-2003 |
微咸水、海水和鹽水中堿性的試驗方法 |
(Test Method for Alkalinity in Brackish Water, Seawater, and Brines ) |
| ANSI/ASTM D3919-2004 |
用石墨爐原子吸收光譜法測量水中痕量素的實施規程 |
|
| ANSI/ASTM D3948-2004 |
用便攜式分離計進行航空渦輪燃料脫水特性的現場試驗方法 |
|
| ANSI/ASTM D3955-2004 |
電絕緣漆規范 |
|
| ANSI/ASTM D396-2005 |
燃料油規范 |
|
| ANSI/ASTM D396a-2002 |
燃料油規范 |
(Fuel Oils, Specification for (05.01) ) |
| ANSI/ASTM D3972-2002 |
用放射化學法進行水中同位素鈾的試驗方法 |
(Test Method for Isotopic Uranium in Water by Radiochemistry ) |
| ANSI/ASTM D3981-2003 |
通用和包裝用中密度聚乙烯薄膜規格 |
(Specification for Medium-density Polyethylene Films for General Use and Packaging Applications ) |
| ANSI/ASTM D4000-2003 |
特殊用途塑料材料的分類系統(08.03) |
(Classification System for Specifying Plastic Materials (08.03) ) |
| ANSI/ASTM D4007a-2002 |
離心法測定原油中的水和沉積物(實驗室法) |
(Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedures) (05.02) ) |
| ANSI/ASTM D4045-2004 |
利用加氫分解作用和速率測定比色法測試石油產品中硫的含量 |
|
| ANSI/ASTM D4048-2002 |
用銅帶生銹試驗檢測潤滑油對銅腐蝕的方法 |
(Method for Detection of Copper Corrosion from Lubricating Grease by the Copper Strip Tarnish Test (05.02) ) |
| ANSI/ASTM D4055-2002 |
薄膜過濾法測定戊烷不溶性 |
(Pentane Insolubles by Membrane Filtration (05.02) ) |
| ANSI/ASTM D4055-2004 |
薄膜過濾法測定戊烷不溶物 |
|
| ANSI/ASTM D4127-2002 |
用于離子選擇電極的術語 |
(Terminology Used with Ion-Selective Electrodes ) |
| ANSI/ASTM D4171-2004 |
燃料系統防凍劑規范 |
|
| ANSI/ASTM D4175-2002 |
石油、石油產品和潤滑脂相關術語 |
(Petroleum, Petroleum Products, and Lubricants, Terminology Relating to (05.03) ) |
| ANSI/ASTM D4176-2002 |
蒸餾燃料中游離水和粒子污染物的試驗方法(清潔和透明通過/停止程序) |
(Test Method for Free Water and Particulate Contamination in Distillate Fuels (Clear and Bright Pass/Fail Proceedings) (05.02) ) |
| ANSI/ASTM D4190-2003 |
用直流氬等離子體原子發射光譜法測定水中素的試驗方法 |
(Test Method for Elements in Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy ) |
| ANSI/ASTM D4191-2003 |
原子吸收分光光度法測定水中鈉含量的試驗方法 |
(Test Method for Sodium in Water by Atomic Absorption Spectrophotometry ) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com