標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASME RTP-1-1989 |
增強熱固塑料防腐設備 |
Reinforced Thermoset Plastic Corrosion Resistant Equipment |
| ANSI/ASME RTP-1b-2002 |
增強熱固性塑料防腐設備 |
(Reinforced Thermoset Plastic Corrosion Equipment ) |
| ANSI/ASME RTP-1c-2003 |
增強熱固性塑料耐腐蝕設備 |
(Reinforced Thermoset Plastic Corrosion Resistant Equipment ) |
| ANSI/ASME RTP-1d-2004 |
增強熱固性塑料防腐設備 |
|
| ANSI/ASME RTP-1d-2004 |
增強型熱固性塑料防腐設備 |
|
| ANSI/ASME TDP-1-1998 |
發電用蒸汽輪機防水損的推薦實施規程 |
Recommended Practices for the Prevention of Water Damage to Steam Turbines Used for Electric Power Generation |
| ANSI/ASME Y 1.1-1989 |
在制圖和文本中使用的縮略語 |
Abbreviations for Use on Drawings and in Text |
| ANSI/ASME Y 14.1-1995 |
十進制的英寸繪制圖尺寸和格式 |
Decimal Inch Drawing Sheet Size and Format |
| ANSI/ASME Y 14.100M-1998 |
工程制圖實施規程 |
Engineering Drawing Practices |
| ANSI/ASME Y 14.13M-1981 |
工程圖紙及相關文獻.機械彈簧表示法 |
Engineering Drawing and Related Documentation Practices - Mechanical Spring Representation |
| ANSI/ASME Y 14.18M-1986 |
工程圖紙及相關文獻.光學部件 |
Engineering Drawings and Related Documentation Practices - Optical Parts |
| ANSI/ASME Y 14.1M-1995 |
米制繪制圖尺寸和格式 |
Metric Drawing Sheet Size and Format |
| ANSI/ASME Y 14.24M-1989 |
工程圖紙的類型及其應用 |
Types and Applications of Engineering Drawings |
| ANSI/ASME Y 14.2M-1992 |
圖線畫法和字體 |
Line Conventions and Lettering |
| ANSI/ASME Y 14.32.1M-1994 |
底盤車架.轎車和輕型卡車.陸上車輛操作規程 |
Chassis Frames - Passenger Car and Light Truck - Ground Vehicle Practices |
| ANSI/ASME Y 14.34M-1996 |
相關表 |
Associated Lists |
| ANSI/ASME Y 14.35M-1997 |
工程圖紙及其相關文獻的修訂 |
Revision of Engineering Drawings and Associated Documents |
| ANSI/ASME Y 14.36M-1996 |
表面紋理符號 |
Surface Texture Symbols |
| ANSI/ASME Y 14.3M-1994 |
投影圖和截面圖 |
Multiview and Sectional View Drawings |
| ANSI/ASME Y 14.4M-1989 |
直觀圖 |
Pictorial Drawing |
| ANSI/ASME Y 14.5.1M-1994 |
尺寸計算和公差.原理的數學定義 |
Dimensioning and Tolerances - Mathematical Definitions of Principles |
| ANSI/ASME Y 14.5M-1994 |
尺寸和公差計算 |
Dimensioning and Tolerancing |
| ANSI/ASME Y 14.6-1978 |
工程圖紙及相關文獻.螺紋表示法 |
Screw Thread Representation, Engineering Drawing and Related Documentation Practice |
| ANSI/ASME Y 14.6aM-1981 |
工程圖紙及相關文獻.螺紋表示法(米制補充件) |
Engineering Drawing and Related Documentation Practices - Screw Thread Representation (Metric Supplement) |
| ANSI/ASME Y 14.7.1-1971 |
齒輪繪圖標準.第1部分:正齒輪、斜齒輪、人字齒輪和齒條 |
Gear Drawing Standards - Part 1, for Spur, Helical, Double Helical, and Rack |
| ANSI/ASME Y 14.8M-1996 |
鑄件和鍛件 |
Castings and Forgings |
| ANSI/ASME Y 32.2.3-1949 |
管配件、閥門和管道用圖形符號 |
Graphical Symbols for Pipe Fittings, Valves and Piping |
| ANSI/ASME Y14.1-2005 |
十進制英制繪圖紙規格和格式 |
|
| ANSI/ASME Y14.100-2004 |
工程圖制圖規程 |
|
| ANSI/ASME Y14.100-2004 |
工程圖制圖規程 |
|
| ANSI/ASME Y14.100-2004 |
工程圖制圖規程 |
|
| ANSI/ASME Y14.1M-2005 |
米制繪圖紙規格和格式 |
|
| ANSI/ASME Y14.38a-2002 |
縮寫和縮寫字母 |
(Abbreviations and Acronyms ) |
| ANSI/ASME Y14.40.0-2002 |
產品技術文獻中使用的圖形符號的設計基本規則 |
(Basic Rules for the Design of Graphical Symbols for Use in the Technical Documentation of Products ) |
| ANSI/ASME Y14.40.1-2002 |
圖用圖形符號.第1部分:通用信息和符號 |
(Graphical Symbols for Diagrams-Part 1: General Information and Indexes ) |
| ANSI/ASME Y14.40.10-2002 |
圖用圖形符號.第10部分:液壓轉換器 |
(Graphical Symbols for Diagrams-Part 10: Fluid Power Converters ) |
| ANSI/ASME Y14.40.11-2002 |
圖解用圖形符號.第11部分:熱傳輸和熱機設備 |
(Graphical Symbols for Diagrams-Part 11: Devices for Heat Transfer and Heat Engines ) |
| ANSI/ASME Y14.40.12-2002 |
圖解用圖形符號.第12部分:分離、凈化和攪拌設備 |
(Graphical Symbols for Diagrams-Part 12: Devices for Separating, Purification and Mixing ) |
| ANSI/ASME Y14.40.15-2003 |
圖表的圖形符號.第15部分:安裝圖和網絡圖 |
(Graphical Symbols for Diagrams-Part 15: InstallationDiagrams and Network Maps ) |
| ANSI/ASME Y14.40.2-2002 |
圖用圖形符號.第2部分:通用圖形符號 |
(Graphical Symbols for Diagrams-Part 2: Graphical Symbols for General Application ) |
| ANSI/ASME Y14.40.3-2002 |
圖用圖形符號.第3部分:連接和相關設備 |
(Graphical Symbols for Diagrams-Part 3: Connections and Related Devices ) |
| ANSI/ASME Y14.40.4-2002 |
圖解用圖形符號.第4部分:傳動裝置及相關設備 |
(Graphical Symbols for Diagrams-Part 4: Actuators and Related Devices ) |
| ANSI/ASME Y14.40.5-2002 |
圖解用圖形符號.第5部分:測量和控制設備 |
(Graphical Symbols for Diagrams-Part 5: Measurement and Control Devices ) |
| ANSI/ASME Y14.40.6-2002 |
圖解用圖形符號.第6部分:測量和控制功能 |
(Graphical Symbols for Diagrams-Part 6: Measurement and Control Functions ) |
| ANSI/ASME Y14.40.7-2002 |
圖解用圖形符號.第7部分:基本的機械件 |
(Graphical Symbols for Diagrams-Part 7: Basic Mechanical Components ) |
| ANSI/ASME Y14.40.8-2002 |
圖用圖形符號.第8部分:閥門和氣閘 |
(Graphical Symbols for Diagrams-Part 8: Valves and Dampers ) |
| ANSI/ASME Y14.40.9-2002 |
圖用圖形符號.第9部分:泵、壓縮機和風扇 |
(Graphical Symbols for Diagrams-Part 9: Pumps, Compressors and Fans ) |
| ANSI/ASME Y14.41-2003 |
產品定義數據集規程.數字 |
(Product Definition Data Set Practices - Digital ) |
| ANSI/ASME Y14.42-2002 |
數字鑒定系統 |
(Digital Approval Systems ) |
| ANSI/ASME Y14.43-2003 |
壓緊裝置和夾緊裝置的尺寸和公差測量原理 |
(Dimensioning and Tolerancing Principals for Gages and Fixtures ) |
| ANSI/ASME Y32.10-1967 |
液壓驅動圖示用圖形符號 |
Graphic symbols fluid power diagrams |
| ANSI/ASME Y32.18-1972 |
示意圖中使用的機械和聲學件符號 |
Symbols for mechanical and acoustical elements as used in schematic diagrams |
| ANSI/ASME Y32.4-1977 |
建筑和建筑結構圖示中衛生設備用圖形符號 |
Graphic symbols for plumbing fixtures for diagrams used in architecture and building construction |
| ANSI/ASME Y32.7-1972 |
鐵路地圖與輪廓圖的圖例 |
Graphic symbols for railroad maps and profiles |
| ANSI/ASNT CP-189-2001 |
無損檢驗人員的資格和認證 |
Qualification and Certification of Nondestructive Testing Personnel |
| ANSI/ASNT ILI-PQ-2005 |
在線檢查人員資格和證書的標準 |
|
| ANSI/ASQ E4-2004 |
環境數據收集和環境技術項目的規范和指南 |
|
| ANSI/ASQC B 1, B 2, B 3-1985 |
質量控制圖、數據分析方法和生產過程中的質量導則 |
Guide for Quality Control Charts, Method of Analyzing Data, and Controlling Quality during Production |
| ANSI/ASQC C 1-1985 |
質量保證計劃的一般要求 |
Quality Program, General Requirements for a |
| ANSI/ASQC D 1160-1995 |
形式設計評論 |
Formal Design Review |
| ANSI/ASQC E 1-1989 |
非核發電設備方案階段的質量保證計劃指南 |
Quality Program Guidelines for Project Phase of Non-Nuclear Power Generation Facilities |
| ANSI/ASQC E 2-1984 |
設計驗收指南 |
Inspection Planning, Guide to |
| ANSI/ASQC E 4-1994 |
環境數據收集和環境技術計劃用質量體系的規范和導則 |
Specifications and Guidelines for Quality Systems for Environmental Data Collection and Environmental Technology Programs |
| ANSI/ASQC M 1-1987 |
校正系統 |
Calibration Systems |
| ANSI/ASQC Q 10011-1994 |
質量體系審核指南 |
Guidelines for Auditing Quality Systems (includes ANSI/ASQC Q10011-1-1994, Q10011-2-1994, and Q10011-3-1994) |
| ANSI/ASQC Q 9002-1994 |
質量體系.生產、安裝和運行中使用的質量保證模型 |
Quality Systems - Model for Quality Assurance in Production, Installation, and Servicing |
| ANSI/ASQC Q 9003-1994 |
質量體系.終檢和測試中使用的質量保證模型 |
Quality Systems - Model for Quality Assurance in Final Inspection and Test |
| ANSI/ASQC S 1-1987 |
計數型間隔批量抽樣方案 |
An Attribute Skip-Lot Sampling Program |
| ANSI/ASQC S 2-1995 |
計數抽樣說明 |
Introduction to Attribute Sampling |
| ANSI/ASQC Z 1.11-1996 |
質量保證標準.關于教育和培訓機構的ANSI/sort/ISO/ASQC Q9001或9002的應用導則 |
Quality Assurance Standards - Guidelines for the Application of ANSI/sort/ISO/ASQC Q9001 or Q9002 to Education and Training Institutions |
| ANSI/ASQC Z 1.4-1993 |
計數型檢驗的取樣規程和圖表 |
Sampling Procedures and Tables for Inspection by Attributes |
| ANSI/ASQC Z 1.9-1993 |
根據不合格百分比變量檢查的取樣規程和圖表 |
Sampling Procedures and Tables for Inspection by Variables for Percent Nonconforming |
| ANSI/ASSE 1002-1979 |
廁所沖水箱球閥 |
Water Closet Flush Tank Ball Cocks |
| ANSI/ASSE 1003-1995 |
家用供水系統用減壓閥 |
Water Pressure Reducing Valves for Domestic Water Supply Systems |
| ANSI/ASSE 1006-1992 |
家用洗碗機管道設施要求 |
Household Dishwashers, Plumbing Requirements for |
| ANSI/ASSE 1010-1998 |
水錘防止裝置性能要求 |
Performance Requirements for Water Hammer Arresters |
| ANSI/ASSE 1010-2004 |
水錘制動裝置性能要求 |
|
| ANSI/ASSE 1011-2004 |
軟管連接真空軋碎機 |
|
| ANSI/ASSE 1012-1995 |
內部媒介大氣通風口防回流裝置的性能要求 |
Performance Requirements for Backflow Preventer with Intermediate Atmospheric Vent |
| ANSI/ASSE 1012-2002 |
內部媒介大氣通風口防回流裝置的性能要求 |
(Performance Requirements for Backflow Preventer with Intermediate Atmospheric Vent ) |
| ANSI/ASSE 1013-1999 |
減壓主要防回流裝置和減壓主要防火回流裝置的性能要求 |
Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Priniciple Fire Protection Backflow Preventers |
| ANSI/ASSE 1013-2005 |
減壓法防回流裝置和減壓防火法防回流裝置的性能要求 |
|
| ANSI/ASSE 1014-2005 |
手持式淋浴裝置防回流設備的性能要求 |
|
| ANSI/ASSE 1015-1999 |
雙止回裝置組件和雙防火止回裝置組件的性能要求 |
Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies |
| ANSI/ASSE 1015-2005 |
雙止回防回流裝置組件和雙止回防火防回流裝置組件的性能要求 |
|
| ANSI/ASSE 1016-2005 |
單個淋浴裝置和浴盆/淋浴組合中淋浴裝置用自動補償閥門的性能要求 |
|
| ANSI/ASSE 1018-1978 |
疏水器密封起動注水閥 |
Trap Seal Primer Valves |
| ANSI/ASSE 1018-2002 |
疏水器密封起動注水閥 |
(Trap Seal Primer Valves - Potable Water Supplied ) |
| ANSI/ASSE 1019-2004 |
防凍自動排水型真空開關墻壁消防栓性能要求 |
|
| ANSI/ASSE 1020-2004 |
壓力真空斷路器組件 |
|
| ANSI/ASSE 1022-1998 |
碳酸鹽飲料機械上防回流裝置的性能要求 |
Performance Requirements for Backflow Preventers on Carbonated Beverage Machines |
| ANSI/ASSE 1022-2003 |
碳酸鹽飲料機械上防回流裝置的性能要求 |
(Performance Requirements for Backflow Preventers on Carbonated Beverage Machines ) |
| ANSI/ASSE 1024-1998 |
雙重止回閥型防回流裝置 |
Dual Check Valve Type Backflow Preventers |
| ANSI/ASSE 1024-2004 |
雙重止回閥型防回流裝置 |
|
| ANSI/ASSE 1035-1995 |
實驗室水龍頭防回流裝置 |
Laboratory Faucet Backflow Preventer |
| ANSI/ASSE 1035-2002 |
實驗室水龍頭防回流裝置 |
(Laboratory Faucet Backflow Preventer ) |
| ANSI/ASSE 1044-2002 |
圈閉密封起動裝置.水系類型和電子設計類型 |
(Trap Seal Primer Devices - Drainage Types and Electronic Design Types ) |
| ANSI/ASSE 1046-1990 |
熱膨脹減壓閥 |
Thermal Expansion Relief Valve |
| ANSI/ASSE 1047-2005 |
減壓檢測器組合防回流裝置 |
|
| ANSI/ASSE 1048-2005 |
雙重檢驗檢測器組合防回流裝置 |
|
| ANSI/ASSE 1051-1998 |
污水管道系統用氣體導入閥 |
Air Admittance Valves for Plumbing Drainage Systems |
| ANSI/ASSE 1052-2004 |
軟管連接防回流裝置的性能要求 |
|
| ANSI/ASSE 1056-1995 |
背部虹吸回流真空破碎機 |
Back Siphonage Backflow Vacuum Breakers |
| ANSI/ASSE 1056-2002 |
背部虹吸回流真空破碎機 |
(Back Siphonage Backflow Vacuum Breakers ) |
| ANSI/ASSE 1064-2002 |
防回流組裝的現場試驗成套器件 |
(Backflow Prevention Assembly Field Test Kits ) |
| ANSI/ASSE 1069-2005 |
自動溫度控制混合閥門的性能要求 |
|
| ANSI/ASSE 1070-2004 |
水溫限值裝置 |
|
| ANSI/ASSE 5000 Series-1991 |
防回流裝置(14個試驗程序) |
Backflow Prevention Assemblies (14 Test Procedures) |
| ANSI/ASSE 6000-1998 |
醫用氣體設備安裝者、檢查員及核對員的專業資格標準 |
Professional Qualification Standard for Medical Gas Systems Installers, Inspectors and Verifiers |
| ANSI/ASSE 6000-2002 |
醫用氣體設備安裝者、檢查員及核對員的專業資格標準 |
(Professional Qualification Standard for Medical Gas Systems Installers, Inspectors and Verifiers ) |
| ANSI/ASSE Z590.2-2003 |
職業安全位置的范圍和功能的確定標準 |
(Criteria For Establishing the Scope and Functions of the Professional Safety Position ) |
| ANSI/ASTM A 1005/A 1005M-2000 |
黑色的,水平末端的徑向和水平接縫的鋼制線管規范.雙埋頭弧焊 |
Specification for Steel Line Pipe, Black, Plain End, Logitudinal and Helical Seam. Double Submerged-Arc Welded |
| ANSI/ASTM A 1006-2000 |
激光束焊接平頭無鍍層鋼管線規范 |
Specification for Steel Line Pipe Black, Plain End, Laser Beam Welded |
| ANSI/ASTM A 1007-2000 |
碳鋼線和線繩規范 |
Specification for Carbon Steel Wire for Wire Rope |
| ANSI/ASTM A 1009-2000 |
高頻(10KHz-1MHz)動力傳輸和過濾導體應用的軟磁化錳鋅鐵芯材料規范 |
Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10KHz to 1MHz) Power Transformer and Filter Inductor Applications |
| ANSI/ASTM A 1013-2000 |
在控制的溫度下高頻軟磁化芯件芯損失的試驗方法 |
Test Method for High Frequency (10 kHz - 1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures using the Voltmeter-Ammeter-Wattmeter Method |
| ANSI/ASTM A 1014-2000 |
高溫用的沉淀硬化螺栓規范 |
Specification for a Precipitation-Hardening Bolting Material (UNS NO7718) for High Temperature Service |
| ANSI/ASTM A 1015-2001 |
衛生用的管狀產品指南 |
Guide for Videoborescoping of Tubular Products for Sanitary Applications |
| ANSI/ASTM A 1016/A 1016M-2002 |
鐵素體鋼、奧氏體鋼和不銹鋼鋼管的一般要求規范 |
Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes |
| ANSI/ASTM A 1017-2001 |
鉻鉬鎢合金鋼制壓力容器板材規范 |
Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com