標準號 |
中文名稱 |
英文名稱 |
| ANSI Z88.2-1992 |
呼吸保護 |
Respiratory Protection |
| ANSI Z89.1-2003 |
工業用頭部保護用品 |
(Industrial Head Protection ) |
| ANSI Z9.3-1985 |
排氣系統.噴光漆操作的設計與建造和通風的安全要求 |
Exhaust Systems - Spray Finishing Operations - Safety Code for Design, Construction and Ventilation |
| ANSI Z9.4-1985 |
排氣系統.噴砂操作的通風和安全作業 |
Exhaust Systems - Abrasive Blasting Operations - Ventilation and Safe Practices |
| ANSI Z97.1-1984 |
建筑物中窗用玻璃的安全性能規范和測試方法 |
Safety Glazing Materials Used in Buildings - Safety Performance Specifications and Methods of Test |
| ANSI Z97.1-2004 |
建筑物中窗用玻璃材料的安全性能規范和測試方法 |
|
| ANSI/(AAMA) 001-1992 |
數字控制纖維切割機.數據格式.ANSI/EIA 274-D-1980(R1988)的并行標準 |
Numerically Controlled Fabric Cutting Machines - Data Format - A Companion Standard to ANSI/EIA 274-D-1980 (R1988) |
| ANSI/(AAMA) 292-1993 |
數據交換格式.數據格式 |
Pattern Data Interchange - Data Format |
| ANSI/(NFPA) T 2.12.1-1993 |
液力傳動.系統和產品.測量平均穩定狀態壓力的方法 |
Hydraulic Fluid Power - Systems and Products - Method of Measuring Average Steady-State Pressure |
| ANSI/(NFPA) T 2.12.10-1993 |
液力傳動.系統和產品.常規測量,原理和公差 |
Hydraulic Fluid Power - Systems and Products - Testing General Measurement, Principles, and Tolerances |
| ANSI/(NFPA) T 2.13.1 R3-1998 |
工業液力傳動系統耐火液體的使用規程 |
Use of Fire-Resistant Fluids for Industrial Hydraulic Fluid Power Systems, Practice for the |
| ANSI/(NFPA) T 2.13.4-1994 |
信息報告.液壓用液體的保存,維護和處置推薦規程 |
Information Report - Recommendations for Conservation, Maintenance, and Disposal of Hydraulic Fluids |
| ANSI/(NFPA) T 2.13.5-1991 |
液力傳動.工業系統.高水含量液體的操作規程 |
Hydraulic Fluid Power - Industrial Systems - Practice for the Use of High Water Content Fluids |
| ANSI/(NFPA) T 2.13.7 R1-1997 |
液力傳動.石油流體.總體調節 |
Hydraulic Fluid Power - Petroleum Fluids - Prediction of Bulk Moduli |
| ANSI/(NFPA) T 2.13.8-1997 |
液力傳動.耐火液體.定義,分類和試驗 |
Hydraulic Fluid Power - Fire Resistant Fluids - Definitions, Classifications, and Testing |
| ANSI/(NFPA) T 2.24.2-1997 |
液壓動力系統.提高密封可信度的方法 |
Hydraulic Fluid Power Systems - Methods to Improve Sealing Reliability |
| ANSI/(NFPA) T 2.30.1-1994 |
液壓動力感應器選擇的指南 |
Guide for Selection of Fluid Power Pressure Transducers |
| ANSI/(NFPA) T 2.6.1 R2-2000 |
液動件.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動件的壓力的碎裂壓力額定值的方法 |
Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Component |
| ANSI/(NFPA) T 2.9.11-1989 |
液力傳動.系統中油樣品顆粒含量的測定方法 |
Hydraulic Fluid Power-Method of Determining the Particulate Count of an Oil Sample from a System (Using Liquid Automatic Counters) |
| ANSI/(NFPA) T 2.9.14-1993 |
液力傳動.液體污染.重力計方法對固體污染水平的測定 |
Hydraulic Fluid Power - Fluid Contamination - Determination of Solid Contaminant Level by the Gravimetric Method |
| ANSI/(NFPA) T 3.10.17-1995 |
有限壽命液體過濾壓力/壽命比.檢驗壓力過濾器受壓力外殼的疲勞壽命比率和破損壓力比率的方法 |
Finite Life Hydraulic Filter Pressure/Life Rating - Method for Verifying the Fatigue Life Rating and the Burst Pressure Rating of the Pressure Containing Envelope of a Spin-On Hydraulic Filter |
| ANSI/(NFPA) T 3.10.4 R1-1991 |
液力傳動.過濾器和分離器.圖形符號補充 |
Hydraulic Fluid Power - Filters and Separators - Graphic Symbols Supplement |
| ANSI/(NFPA) T 3.10.5.1 R2-2000 |
液壓過濾器/分離器外殼.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動過濾器/分離器的壓力的碎裂壓力額定值的方法 |
|
| ANSI/(NFPA) T 3.12.10 R2-2000 |
空氣管路過濾器、調節器和/或潤滑器.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動過濾器、調節器和/或潤滑器的壓力的碎裂壓力額定值的方法 |
|
| ANSI/(NFPA) T 3.12.3 R2-1991 |
氣壓液動.壓力調節器.工業類型 |
Pneumatic Fluid Power - Pressure Regulator - Industrial Type |
| ANSI/(NFPA) T 3.16.2 R1-1997 |
液力傳動.非整體工業貯液器的設計 |
Hydraulic Fluid Power - Design for Nonintegral Industrial Reservoirs |
| ANSI/(NFPA) T 3.16.3 R1-1997 |
液力傳動.非整體工業動力件的要求 |
Hydraulic Fluid Power - Requirements for Nonintegral Industrial Power Units |
| ANSI/(NFPA) T 3.19.25-1998 |
信息報告.液動系統.密封裝置.彈性密封體和排除裝置的儲存,處理和安裝 |
Information Report - Fluid Power Systems - Sealing Devices - Storage, Handling, and Installation of Elastomeric Seals and Exclusion Devices |
| ANSI/(NFPA) T 3.19.32-1992 |
旋轉軸蓋型密封件.第2部分:詞匯 |
Rotary Shaft Lip Type Seals - Part 2: Vocabulary |
| ANSI/(NFPA) T 3.20.14-1990 |
氣動快速反應耦合.塞尺寸 |
Pneumatic Quick-Action Couplings - Plug Dimensions |
| ANSI/(NFPA) T 3.20.15-1991 |
液力傳動.快速反應耦合.急流面 |
Hydraulic Fluid Power - Quick-Action Coupling - Flush Face Type |
| ANSI/(NFPA) T 3.20.8 R2-2000 |
速動連接件.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動速動連接件的壓力的碎裂壓力額定值的方法 |
|
| ANSI/(NFPA) T 3.21.16-1997 |
氣壓液動.氣動產品的通信和標簽 |
Pneumatic Fluid Power - Labeling and Communication of Pneumatic Products |
| ANSI/(NFPA) T 3.21.3-1990 |
氣壓液動.固定件的流動率試驗過程和報告方法. |
Pneumatic Fluid Power - Flow Rating Test Procedure and Reporting Method - for Fixed Orifice Components |
| ANSI/(NFPA) T 3.21.4 R2-2000 |
氣動閥.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動氣動閥的壓力的碎裂壓力額定值的方法 |
Pneumatic valve - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power pneumatic valve |
| ANSI/(NFPA) T 3.21.8-1990 |
氣壓液動.反應時間的測量.直接控制閥門 |
Pneumatic Fluid Power - Measurement of Response Time - Directional Control Valves |
| ANSI/(NFPA) T 3.28.9 R1-1989 |
液壓動力系統和產品.移動部件流動控制.圖解方法 |
Fluid Power Systems and Products - Moving Parts Fluid Controls - Method of Diagramming |
| ANSI/(NFPA) T 3.29.2 R2-2000 |
壓力開關.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動壓力開關的壓力的碎裂壓力額定值的方法 |
Pressure switch - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power pressure switch |
| ANSI/(NFPA) T 3.4.7 R2-2000 |
蓄能器.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動蓄能器的壓力的碎裂壓力額定值的方法 |
Accumulator - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power accumulator |
| ANSI/(NFPA) T 3.5.14 R1-1997 |
液力傳動.直接控制閥門.分界特性的測定方法 |
Hydraulic Fluid Power - Directional Control Valve - Method for Determining the Metering Characteristics |
| ANSI/(NFPA) T 3.5.26 R2-2000 |
液壓閥.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動液壓閥的壓力的碎裂壓力額定值的方法 |
Hydraulic valve - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power hydraulic valve |
| ANSI/(NFPA) T 3.5.28 R1-1997 |
液力傳動.閥門.壓力不同的流量特性.測量和記錄方法 |
Hydraulic Fluid Power - Valves - Pressure Differential-Flow Characteristic - Method of Measuring and Recording |
| ANSI/(NFPA) T 3.5.45-1996 |
液力傳動.兩孔滑動盒式閥門.容量 |
Hydraulic Fluid Power - Two-Port Slip-In Cartridge Valves - Cavities (Technically equivalent to ISO 7368: 1989) |
| ANSI/(NFPA) T 3.5.46-1990 |
液力傳動.閥門.壓力釋放固定接口 |
Hydraulic Fluid Power - Valves - Pressure Relief Mounting Interface |
| ANSI/(NFPA) T 3.6.29 R2-2000 |
連結桿或螺栓缸.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的連結桿或螺栓缸的壓力的碎裂壓力額定值的方法 |
|
| ANSI/(NFPA) T 3.6.31 R2-2000 |
伸縮缸和無螺栓端口結構缸.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動伸縮缸和無螺栓端口液壓缸的壓力的碎裂壓力額定值的方法 |
|
| ANSI/(NFPA) T 3.6.37-1991 |
液力傳動.氣缸.屈曲負載的測定方法 |
Hydraulic Fluid Power - Cylinders - Method for Determining the Buckling Load |
| ANSI/(NFPA) T 3.6.54 R1-1997 |
液力傳動.氣缸孔.SAE直螺紋O形環和四螺栓法蘭孔.ISO直螺紋O形環和四螺栓法蘭孔.重載和輕載四方頭接棒氣缸 |
Hydraulic Fluid Power - Cylinder Ports - SAE Straight Thread O-Ring and Four-Bolt Flange Ports - ISO Straight Thread O-Ring and Four-Bolt Flange Ports - Heavy-Duty and Light-Duty Square Head Tie Rod Cylinders |
| ANSI/(NFPA) T 3.6.59-1993 |
液力傳動.氣缸.緩沖性能 |
Hydraulic Fluid Power - Cylinders - Cushion Performance |
| ANSI/(NFPA) T 3.6.7 R2-1996 |
流體動力系統和產品.正方形頭氣缸,固定尺寸 |
Fluid Power Systems and Products - Square Head Industrial Cylinders - Mounting Dimensions |
| ANSI/(NFPA) T 3.9.17 R2-1997 |
液力傳動.無源替代泵.馬達和整體傳輸.基本性能數據的試驗和表示方法 |
Hydraulic Fluid Power - Positive Displacement Pumps, Motors and Integral Transmissions - Method of Testing and Presenting Basic Performance Data |
| ANSI/(NFPA) T 3.9.2 R3-1998 |
液力傳動.定點替代泵和馬達.固定法蘭和軸末端的識別編碼和尺寸 |
Hydraulic Fluid Power - Positive Displacement Pumps and Motors - Dimensions and Identification Code for Mounting Flanges and Shaft Ends |
| ANSI/(NFPA) T 3.9.20-1992 |
液力傳動.泵.壓力補償泵的基本性能數據的表示和試驗方法 |
Hydraulic Fluid Power - Pumps - Method of Testing and Presenting Basic Performance Data for Pressure Compensated Pumps |
| ANSI/(NFPA) T 3.9.22 R2-2000 |
泵/電動機.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動泵和電動機的壓力的碎裂壓力額定值的方法 |
Pump/motor - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power pump and motor |
| ANSI/(NFPA) T 3.9.31-2-1994 |
液力傳動.馬達特性的測定.第2部分:起動性 |
Hydraulic Fluid Power - Determination of Characteristics of Motors - Part 2: Startability |
| ANSI/(NFPA) T 3.9.33-1997 |
液力傳動.泵.負載感應泵基本性能數據的表示和試驗方法 |
Hydraulic Fluid Power - Pumps - Method of Testing and Presenting Basic Performance Data for Load Sensing Pumps |
| ANSI/(NFPA) T3.19.25 R1-2004 |
信息報告.液壓系統.密封裝置.彈性密封件和隔離裝置的存儲、搬運和安裝 |
|
| ANSI/(NFPA/JIC) T 2.24.1-1991 |
液力傳動.固定工業機械的系統標準 |
Hydraulic Fluid Power - Systems Standard for Stationary Industrial Machinery |
| ANSI/AAMA 1002.10-1993 |
窗和滑動玻璃門用防暴風雨產品 |
Insulating Storm Products for Windows and Sliding Glass Doors |
| ANSI/AAMA 101-1993 |
鋁和PVC制優質窗和玻璃門 |
Aluminum and Poly(Vinyl Chloride) (PVC) Prime Windows and Glass Doors |
| ANSI/AAMA 1402-1986 |
鋁制壁板、拱腹及挑口板的標準規范 |
Standard Specifications for Aluminum Siding, Soffit and Fascia |
| ANSI/AAMA 396-1998 |
數控縫紉機 |
Numerically Controlled Fabric Sewing Machines |
| ANSI/AAMI AT 6-1991 |
自體輸注裝置 |
Autologous Transfusion Devices |
| ANSI/AAMI BE78-2002 |
醫療設施的生物評定.第10部分:刺激作用和致敏作用試驗 |
(Biological Evaluation of Medical Devices - Part 10: Tests for Irritation and Sensitization ) |
| ANSI/AAMI BF 7-1989 |
血液輸注微生物過濾器 |
Blood Transfusion Micro-Filters |
| ANSI/AAMI BF64-2002 |
白細胞減數分裂過濾器 |
(Leukocyte Reduction Filters ) |
| ANSI/AAMI BP 22-1994 |
血壓傳導器 |
Blood Pressure Transducers |
| ANSI/AAMI DF 2-1996 |
心臟去纖顫器裝置 |
Cardiac Defibrillator Devices |
| ANSI/AAMI DF 39-1993 |
自動去纖顫器和遠程控制去纖顫器 |
Automatic External Defibrillators and Remote-Control Defibrillators |
| ANSI/AAMI DF80-2003 |
醫療電氣設備.第2-4部分:心臟去纖顫器安全性的特殊要求(包括自動化的外部去纖顫器) |
(Medical electrical equipment - Part 2-4: Particular requirements for the safety of cardiac defibrillators (including automated external defilrillators) ) |
| ANSI/AAMI EC 11R-1991 |
診斷用心電圖記錄裝置 |
Diagnostic Electrocardiographic Devices |
| ANSI/AAMI EC 12-1991 |
一次性ECG電極 |
Disposable ECG Electrodes |
| ANSI/AAMI EC 13-1992 |
心臟監測儀,心率儀和警報 |
Cardiac Monitors, Heart Rate Meters, and Alarms |
| ANSI/AAMI EC 38-1994 |
可移動的心電診斷儀 |
Ambulatory Electrocardiographs |
| ANSI/AAMI EC 53-1995 |
ECGA電纜和線 |
ECG Cables and Wires |
| ANSI/AAMI EC 57-1998 |
心律和竇性心動過速部分測量法的結果檢驗和報告 |
Testing and Reporting Performance Results of Cardiac Rhythm and ST Segment Measurement Algorithms |
| ANSI/AAMI EC 71-2001 |
計算機輔助的心電圖描計術的標準通信協議 |
Standard Communications Protocol for Computer-Assisted Electrocardiography |
| ANSI/AAMI ES 1-1993 |
醫療裝置的安全電流限值 |
Safe Current Limits for Electromedical Apparatus |
| ANSI/AAMI HE 48-1993 |
醫療裝置設計的優選規程和人因素工程指南 |
Human Factors Engineering Guidelines and Preferred Practices for the Design of Medical Devices |
| ANSI/AAMI HF 18-1993 |
電子外科裝置 |
Electrosurgical Devices |
| ANSI/AAMI ID 26-1992 |
注射裝置 |
Infusion Devices |
| ANSI/AAMI ID 54-1996 |
腸飼喂連接器和適配器 |
Enteral Feeding Set Connectors and Adapters |
| ANSI/AAMI II 36-1997 |
嬰兒恒溫箱 |
Infant Incubators |
| ANSI/AAMI II 51-1996 |
運輸型嬰兒保育箱 |
Transport Infant Incubators |
| ANSI/AAMI NS 14-1995 |
可植入的脊柱刺激器 |
Implantable Spinal Cord Stimulators |
| ANSI/AAMI NS 15-1995 |
可植入的外周神經刺激器 |
Implantable Peripheral Nerve Stimulators |
| ANSI/AAMI NS 28-1988 |
顱內壓力監測裝置 |
Intracranial Pressure Monitoring Devices |
| ANSI/AAMI NS 4-1985 |
經皮電刺激的神經刺激器 |
Transcutaneous Electrical Nerve Stimulators |
| ANSI/AAMI PAC 49-1993 |
緊急起搏插入系統 |
Pacemaker Emergency Intervention System |
| ANSI/AAMI RD 16-1996 |
先用血液透析器 |
First-Use Hemodialyzers |
| ANSI/AAMI RD 17-1994 |
血液透析血管接管 |
Hemodialyzer Blood Tubing |
| ANSI/AAMI RD 47-1993 |
血液透析器的再應用 |
Reuse of Hemodialyzers |
| ANSI/AAMI RD 5-1992 |
血液透析系統 |
Hemodialysis Systems |
| ANSI/AAMI RD 62-2001 |
血液透析應用的水處理設備 |
Water Treatment Equipment for Hemodialysis Applications |
| ANSI/AAMI RD17-2005 |
血液透析器血液導管 |
|
| ANSI/AAMI RD17/A1-2002 |
人造腎血管.修改件1 |
(Hemodialyzer Blood Tubing-Amendment 1 ) |
| ANSI/AAMI RD47-2002 |
血液透析器的再使用 |
(Reuse of Hemodialyzers ) |
| ANSI/AAMI RD47:2002/A1-2003 |
血液透析器的重復使用.修改件1 |
(Reuse of Hemodialyzers Amendment 1 ) |
| ANSI/AAMI RD5-2003 |
血液透析系統 |
(Hemodialysis Systems ) |
| ANSI/AAMI SP 10-1992 |
電子的或自動的血壓計 |
Electronic or Automated Sphygmomanometers |
| ANSI/AAMI SP 10A-1996 |
電子的或自動的血壓計 |
Electronic or Automated Sphygmonanometers |
| ANSI/AAMI SP 9-1994 |
非自動血壓計 |
Non-Automated Sphygmomanometers |
| ANSI/AAMI SP10-2002 |
手工、電子或自動血壓計 |
(Manual, Electronic, or Automated Sphygmomanometers ) |
| ANSI/AAMI ST 19-1985 |
保健機構飽和蒸汽滅菌過程的生物指示器 |
Biological Indicators for Saturated Steam Sterilization Processes in Health Care Facilities |
| ANSI/AAMI ST 21-1986 |
保健機構環氧乙烷滅菌過程的生物指示器 |
Biological Indicators for Ethylene Oxide Sterilization Processes in Health Care Facilities |
| ANSI/AAMI ST 24-1992 |
用于保健機構的一般用途的環氧乙烷自動滅菌器和無菌源 |
Automatic, General-Purpose Ethylene Oxide Sterilizers and Ethylene Oxide Sterilant Sources Intended for Use in Health Care Facilities |
| ANSI/AAMI ST 33-1996 |
保健機構中環氧乙烷滅菌和蒸氣滅菌用可再次使用的硬質滅菌容器的使用和選擇指南 |
Guidelines for the Selection and Use of Reusable Rigid Sterilization Container Systems for Ethylene Oxide Sterilization and Steam Sterilization in Health Care Facilities |
| ANSI/AAMI ST 34-1991 |
工業滅菌處理中環氧乙烷和蒸氣滅菌生物指示器的使用指南 |
Guideline for the Use of Ethylene Oxide and Steam Biological Indicators in Industrial Sterilization Processes |
| ANSI/AAMI ST 35-1996 |
保健機構和非門診單位醫療裝置的生物凈化和安全處理 |
Safe Handling and Biological Decontamination of Medical Devices in Health Care Facilities and in Nonclinical Settings |
| ANSI/AAMI ST 37-1996 |
火焰滅菌.立即使用的病人護理蒸氣滅菌 |
Flash Sterilization - Steam Sterilization of Patient Care Items for Immediate Use |
| ANSI/AAMI ST 40-1992 |
牙科和醫療機構的臺式干熱(加熱的空氣)滅菌和無菌性 |
Table-Top Dry Heat (Heated Air) Sterilization and Sterility Assurance in Dental and Medical Facilities |
| ANSI/AAMI ST 41-1992 |
良好的醫院操作規程.環氧乙烷滅菌和蒸氣滅菌的保障 |
Good Hospital Practice, Ethylene Oxide Sterilization and Sterility Assurance |
| ANSI/AAMI ST 42-1998 |
非臥床護理,醫療和牙科機構,辦公室護理的蒸氣滅菌和滅菌保證 |
Steam Sterilization and Sterility Assurance in Office-Based, Ambulatory-Care, Medical and Dental Facilities |
| ANSI/AAMI ST 43-1993 |
良好的醫院操作規程:環氧乙烷氣體.通風推薦規程和安全使用 |
Good Hospital Practice: Ethylene Oxide Gas - Ventilation Recommendations and Safe Use |
| ANSI/AAMI ST 44-1992 |
BIER/EO氣體容器 |
BIER/EO Gas Vessels |
| ANSI/AAMI ST 45-1992 |
BIER/蒸氣容器 |
BIER/Steam Vessels |
| ANSI/AAMI ST 46-1993 |
良好的醫院操作規程:蒸氣滅菌和滅菌保證 |
Good Hospital Practice: Steam Sterilization and Sterility Assurance |
| ANSI/AAMI ST 50-1995 |
干熱(加熱空氣)滅菌器 |
Dry Heat (Heated Air) Sterilizers |
| ANSI/AAMI ST 55-1997 |
臺式蒸氣滅菌器 |
Table-Top Steam Sterilizers |
| ANSI/AAMI ST 58-1996 |
保健機構中戊二醛產品的安全使用和處理 |
Safe Use and Handling of Glutaraldehyde-Based Products in Health Care Facilities |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com