標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM A 1018-2001 |
片鋼和帶鋼、重厚度卷材、熱軋、高強度低合金結構碳鋼以及改良可模塑性高強度鈳或釩低合金鋼規范 |
Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon, Structural, High-Strength Low-Alloy, Columbium or Vanadium, and High-Strength Low-Alloy With Improved Formability |
| ANSI/ASTM A 1020-2001 |
熱交換和冷凝用的鍋爐,超級加熱爐熔焊,碳和碳錳鋼管規范 |
Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications |
| ANSI/ASTM A 1022-2001 |
混凝土加筋用刻痕和普通不銹鋼絲和焊接鋼絲規范 |
Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement |
| ANSI/ASTM A 125-2001 |
熱處理螺旋形鋼彈簧規范 |
Specification for Steel Springs, Helical, Heat-Treated |
| ANSI/ASTM A 131/A 131M-2001 |
船用結構鋼規范 |
Specification for Structural Steel for Ships |
| ANSI/ASTM A 134-1996 |
電熔(電弧)焊鋼管(NPS為16英寸和16英寸以上)的規范 |
Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes Nps 16 and Over) |
| ANSI/ASTM A 144-1996 |
鎢鐵合金規范 |
Specification for Ferrotungsten |
| ANSI/ASTM A 167-1999 |
不銹鋼和耐熱鉻鎳鋼板、薄鋼板及帶材規范 |
Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
| ANSI/ASTM A 183-1998 |
鋼軌用碳素鋼螺栓和螺母規范 |
Specification for Carbon Steel Track Bolts and Nuts |
| ANSI/ASTM A 185-2001 |
普通的混凝土加筋用焊接鋼絲網規范 |
Specification for Steel Welded Wire Fabric, Plain, for Concrete Reinforcement |
| ANSI/ASTM A 2-1996 |
普通型、帶槽和防護型碳素鋼平底軌規范 |
Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
| ANSI/ASTM A 203-1996 |
壓力容器用鎳合金鋼板規范 |
Specification for Pressure Vessel Plates, Alloy Steel, Nickel |
| ANSI/ASTM A 210-1996 |
鍋爐和過熱器用無縫中碳素鋼管規范 |
Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes |
| ANSI/ASTM A 214-1996 |
熱交換器與冷凝器用電阻焊接碳素鋼管規范 |
Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes |
| ANSI/ASTM A 226-1996 |
高壓鍋爐與過熱器用電阻焊接碳素鋼管規范 |
Specification for Electric-Resistance-Welded Carbon Steel Boiler and Superheater Tubes for High-Pressure Service |
| ANSI/ASTM A 227/A 227M-1999 |
機械彈簧用冷拉鋼絲規范 |
Specification for Steel Wire, Cold-Drawn for Mechanical Springs |
| ANSI/ASTM A 229-1996 |
機械彈簧用油回火鋼絲規范 |
Specification for Steel Wire, Oil-Tempered for Mechanical Springs |
| ANSI/ASTM A 230-1996 |
閥門用油回火優質碳素彈簧鋼絲規范 |
Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality |
| ANSI/ASTM A 231-1996 |
鉻釩合金鋼彈簧絲規范 |
Specification for Chromium-Vanadium Alloy Steel Spring Wire |
| ANSI/ASTM A 232/A 232M-1999 |
閥彈簧絡-釩合金鋼絲的規范 |
Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
| ANSI/ASTM A 252-1998 |
焊接鋼和無縫鋼管樁規范 |
Specification for Welded and Seamless Steel Pipe Piles |
| ANSI/ASTM A 254-1996 |
銅焊鋼管規范 |
Specification for Copper-Brazed Steel Tubing |
| ANSI/ASTM A 29-1996 |
熱鍛及冷加工碳素鋼和合金鋼棒一般要求的規范 |
Specification for Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, General Requirements for |
| ANSI/ASTM A 299-1996 |
壓力容器用錳硅碳鋼板規范 |
Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon |
| ANSI/ASTM A 302-1996 |
壓力容器用錳鉬和錳鉬鎳合金鋼板規范 |
Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
| ANSI/ASTM A 304-1996 |
有端部淬火硬性要求的碳素鋼及合金鋼棒規范 |
Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements |
| ANSI/ASTM A 314-1996 |
鍛造用不銹鋼坯及鋼棒規范 |
Specification for Stainless Steel Billets and Bars for Forging |
| ANSI/ASTM A 321-1996 |
經淬火和回火的碳素鋼棒規范 |
Specification for Steel Bars, Carbon, Quenched and Tempered |
| ANSI/ASTM A 322-1996 |
標準級合金鋼棒規范 |
Specification for Steel Bars, Alloy, Standard Grades |
| ANSI/ASTM A 34-2001 |
磁性材料的采購檢驗和抽樣實施規范 |
Practice for Procurement Testing and Sampling of Magnetic Materials |
| ANSI/ASTM A 340-2001 |
與磁化試驗有關的符號和定義的術語 |
Terminology of Symbols and Definitions Relating to Magnetic Testing |
| ANSI/ASTM A 343-1997 |
在電力頻率下用瓦特計-安培計-伏特計法和25厘米艾普斯亭(EPSTEIN)機架測定材料交流電磁性能的試驗方法 |
Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-Cm Epstein Test Frame |
| ANSI/ASTM A 351/A 351M-2000 |
壓力容器部件用奧氏體、奧氏體鐵鑄件規范 |
Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts |
| ANSI/ASTM A 370-2001 |
鋼制品機械試驗的試驗方法和定義 |
Test Methods and Definitions for Mechanical Testing of Steel Products |
| ANSI/ASTM A 381-1996 |
高壓輸送系統用金屬弧焊鋼管規范 |
Specification for Metal-Arc-Welded Steel Pipe for Use with High-Pressure Transmission Systems |
| ANSI/ASTM A 383-1996 |
出口及一般工業用未經處理的碳素鋼鐵路輪軸規范 |
Specification for Axles, Railway, Carbon Steel, Untreated for Export and General Industrial Use |
| ANSI/ASTM A 427-1996 |
冷軋和熱軋用鍛制合金鋼輥規范 |
Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction |
| ANSI/ASTM A 450-1996 |
碳素鋼管、鐵素體合金鋼管及奧氏體合金鋼管規范 |
Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes |
| ANSI/ASTM A 478-1996 |
鉻鎳不銹鋼和耐熱鋼制的編織鋼絲規范 |
Specification for Chromium-Nickel Stainless and Heat-Resisting Steel Weaving and Knitting Wire |
| ANSI/ASTM A 496-2001 |
混凝土加筋用刻痕鋼絲的規范 |
Specification for Steel Wire, Deformed, for Concrete Reinforcement |
| ANSI/ASTM A 497-2001 |
混凝土加筋用刻痕焊接鋼絲網規范 |
Specification for Steel Welded Wire Fabric, Deformed, for Concrete Reinforcement |
| ANSI/ASTM A 498-1998 |
帶整體散熱片的無縫和焊接碳鋼、鐵素體和奧氏體合金鋼熱交換管規范 |
Specification for Seamless and Welded Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger Tubes with Integralfins |
| ANSI/ASTM A 503/A 503M-2001 |
大的鍛制曲軸超聲檢查規范 |
Specification for Ultrasonic Examination of Large Forged Crankshafts |
| ANSI/ASTM A 511-1996 |
無縫不銹鋼機械管規范 |
Specification for Seamless Stainless Steel Mechanical Tubing |
| ANSI/ASTM A 512-1996 |
冷拉對縫焊碳素鋼機械管規范 |
Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing |
| ANSI/ASTM A 515-1996 |
中溫及高溫壓力容器用碳素鋼板規范 |
Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
| ANSI/ASTM A 519-1996 |
無縫碳素鋼與合金鋼機械管規范 |
Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
| ANSI/ASTM A 521-1996 |
一般工業用閉式壓模鋼鍛件規范 |
Specification for Steel, Closed-Impression Die Forgings for General Industrial Use |
| ANSI/ASTM A 523-1996 |
高壓管型電纜線路用平端無縫與電阻焊鋼管規范 |
Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
| ANSI/ASTM A 524-1996 |
常溫和低溫用無縫碳素鋼管規范 |
Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures |
| ANSI/ASTM A 555-1996 |
不銹鋼絲和鋼條一般要求的規范 |
Specification for General Requirements for Stainless Steel Wire and Wire Rods |
| ANSI/ASTM A 556-1996 |
無縫冷拉碳素鋼給水加熱器管規范 |
Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes |
| ANSI/ASTM A 568/A 568M-2001 |
熱軋和冷軋、高強度、低合金碳鋼薄板材規范.一般要求 |
Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
| ANSI/ASTM A 575-1996 |
商品級碳素鋼棒(M級)規范 |
Specification for Steel Bars, Carbon, Merchant Quality, M-Grades |
| ANSI/ASTM A 587-1996 |
化學工業用電阻焊低碳鋼管規范 |
Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry |
| ANSI/ASTM A 589-1996 |
水井用無縫和焊接碳素鋼管規范 |
Specification for Seamless and Welded Carbon Steel Water-Well Pipe |
| ANSI/ASTM A 623-2000 |
馬口鐵產品規范,一般要求 |
Specification for Tin Mill Products, General Requirements |
| ANSI/ASTM A 627-1996 |
安全設備用均質不易加工的鋼棒規范 |
Specification for Homogeneous Tool-Resisting Steel Bars for Security Applications |
| ANSI/ASTM A 629-1996 |
安全設備用不易加工的扁鋼棒和型材規范 |
Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications |
| ANSI/ASTM A 632-2001 |
一般應用的焊接的和無縫的奧氏體不銹鋼規范 |
Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
| ANSI/ASTM A 633/A 633M-2001 |
標準化的高強度低合金結構鋼板規范 |
Specification for Normalized High-Strength Low-Alloy Structural Steel Plates |
| ANSI/ASTM A 635/A 635M-2001 |
熱軋?zhí)间摫“�、帶鋼和粗帶鋼卷�?guī)范 |
Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Hot-Rolled |
| ANSI/ASTM A 645/A 645M-1999 |
壓力容器用經特殊處理的5%鎳合金鋼板規范 |
Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated |
| ANSI/ASTM A 660-1996 |
高溫用離心鑄造碳素鋼管規范 |
Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
| ANSI/ASTM A 662-1996 |
中溫和較低溫壓力容器用碳錳板規范 |
Specification for Pressure Vessel Plates, Carbon-Manganese, for Moderate and Lower Temperature Service |
| ANSI/ASTM A 668-1996 |
一般工業用碳素鋼和合金鋼鍛件規范 |
Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
| ANSI/ASTM A 671-1996 |
常溫和較低溫用電熔焊鋼管規范 |
Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
| ANSI/ASTM A 672-1996 |
中溫高壓設備用電熔焊鋼管規范 |
Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures |
| ANSI/ASTM A 673-1996 |
結構鋼沖擊試驗的取樣程序規范 |
Specification for Sampling Procedure for Impact Testing of Structural Steel |
| ANSI/ASTM A 689-1996 |
彈簧用碳素鋼及合金鋼棒的規范 |
Specification for Carbon and Alloy Steel Bars for Springs |
| ANSI/ASTM A 693-1999 |
沉淀硬化不銹鋼和耐熱鋼板、薄板和帶材規范 |
Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| ANSI/ASTM A 695-1996 |
流體動力設備專用熱鍛碳素鋼棒規范 |
Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, for Fluid Power Applications |
| ANSI/ASTM A 698/A 698M-1997 |
在衰減交變磁場中磁屏蔽效果的試驗方法 |
Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields |
| ANSI/ASTM A 704-1996 |
混凝土加筋用焊接普通鋼棒或桿的鋼筋網的規范 |
Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement |
| ANSI/ASTM A 711-1996 |
鋼鍛件坯料規范 |
Specification for Steel Forging Stock |
| ANSI/ASTM A 717/A 717M-2001 |
單條樣品的表面絕緣耐性的試驗方法 |
Test Method for Surface Insulation Resistivity of Single-Strip Specimens |
| ANSI/ASTM A 719-1997 |
磁性材料層疊系數的試驗方法 |
Test Method for Lamination Factor of Magnetic Materials |
| ANSI/ASTM A 720-1997 |
無取向電工鋼延展性的試驗方法 |
Test Method for Ductility of Nonoriented Electrical Steel |
| ANSI/ASTM A 724/A 724M-1999 |
壓力容器用調制碳鋼鋼板規范.用于焊接的分層的壓力容器 |
Specification for Pressure Vessel Plates, Carbon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels |
| ANSI/ASTM A 734-1996 |
經淬火和回火的合金鋼與高強度低合金鋼壓力容器板規范 |
Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched and Tempered |
| ANSI/ASTM A 735-1999 |
中溫和較低溫壓力容器用低碳錳鉬鈳合金鋼板規范 |
Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service |
| ANSI/ASTM A 737/A 737M-1999 |
壓力容器用高強度低合金鋼板規范 |
Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel |
| ANSI/ASTM A 749-1996 |
熱軋?zhí)妓睾透邚姸鹊秃辖痄搸Р囊话阋蟮囊?guī)范 |
Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
| ANSI/ASTM A 750-1996 |
阻擋區域用鋼制通風格柵的規范 |
Specification for Steel Air Ventilating Grille Units for Detention Areas |
| ANSI/ASTM A 751-1996 |
鋼制品化學分析的試驗方法、操作和術語 |
Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products |
| ANSI/ASTM A 765/A 765M-2001 |
具有強制性韌度要求的碳鋼和低合金鋼壓力容器部件的鍛件規范 |
Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements |
| ANSI/ASTM A 768-1996 |
渦輪機轉子及軸用經真空處理的12/T%鉻合金鋼鍛件規范 |
Specification for Vacuum-Treated 12/T% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
| ANSI/ASTM A 773/A 773M-2001 |
D-C電子磁滯曲線記錄儀的使用響鈴和參數過程的材料的D-C磁化特性的試驗方法 |
Test Method for D-C Magnetic Properties of Materials Using Ring and Permeameter Procedures with D-C Electronic Hysteresigraphs |
| ANSI/ASTM A 793-1996 |
不銹鋼軋制樓板的規范 |
Specification for Rolled Floor Plate, Stainless Steel |
| ANSI/ASTM A 794-1996 |
商品級冷軋薄鋼板規范(最高含碳量為0.16%-0.25%) |
Specification for Steel, Sheet (Carbon 0.16% Maximum to 0.25% Maximum), Cold-Rolled, Commercial Quality |
| ANSI/ASTM A 811-1997 |
粉末冶金技術制造的軟磁鐵零件規范 |
Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques |
| ANSI/ASTM A 812-1996 |
多層焊接壓力容器用熱軋高強度低合金鋼薄板規范 |
Specification for Steel Sheet, High-Strength, Low-Alloy, Hot-Rolled, for Welded Layered Pressure Vessels |
| ANSI/ASTM A 82-2001 |
鋼筋混凝土用無節鋼絲規范 |
Specification for Steel Wire, Plain, for Concrete Reinforcement |
| ANSI/ASTM A 832/A 832M-1999 |
壓力容器用鉻-鉬-釩合金鋼板的規范 |
Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium |
| ANSI/ASTM A 833-1996 |
用比較硬度測試儀測量金屬材料壓痕硬度的實施規范 |
Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
| ANSI/ASTM A 837-1996 |
滲碳用合金鋼鍛件規范 |
Specification for Steel Forgings, Alloy, for Carburizing Applications |
| ANSI/ASTM A 838-1997 |
繼電器用易切鐵素體不銹軟磁合金規范 |
Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloys for Relay Applications |
| ANSI/ASTM A 839-1997 |
軟磁性磷鐵粉末冶金技術零件規范 |
Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications |
| ANSI/ASTM A 848/A 848M-2001 |
低碳磁鐵規范 |
Specification for Low Carbon Magnetic Iron |
| ANSI/ASTM A 851-1996 |
高頻感應焊接的未退火奧氏體鋼冷凝器管規范 |
Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes |
| ANSI/ASTM A 865-1996 |
鋼管接頭用黑色或鍍鋅焊接或無縫鋼螺紋聯接套筒規范 |
Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
| ANSI/ASTM A 866-2001 |
防摩擦軸承用中碳鋼規范 |
Specification for Medium Carbon Anti-Friction Bearing Steel |
| ANSI/ASTM A 873-1996 |
壓力容器用鉻鉬合金鋼薄板和帶材規范 |
Specification for Steel Sheet and Strip, Chromium-Molybdenum Alloy, for Pressure Vessels |
| ANSI/ASTM A 880-1996 |
鋼、不銹鋼及相關合金的檢驗與檢查組織和測試實驗室評定準則的標準實施規程 |
Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys |
| ANSI/ASTM A 882-1996 |
涂環氧樹脂的七股預應力鋼絲繩規范 |
Specification for Epoxy Coated Seven-Wire Prestressing Steel Strand |
| ANSI/ASTM A 883-2001 |
非金屬磁性材料鐵磁共振行距和旋磁比率試驗方法 |
Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials |
| ANSI/ASTM A 889-1997 |
在低感應條件下用萬用表法和25厘米艾普斯亭(Epstein)框測定材料交流磁特性的試驗方法 |
Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame |
| ANSI/ASTM A 900-2001 |
非晶磁性帶材疊裝系數的測試方法 |
Test Method for Lamination Factor of Amorphous Magnetic Strip |
| ANSI/ASTM A 901-1997 |
半成品型非晶形磁芯合金規范 |
Specification for Amorphous Magnetic Core Alloys Semi-Processed Types |
| ANSI/ASTM A 906/A 906M-1999 |
架空提升用合金鋼鏈?zhǔn)降跛饕?guī)范 |
Specification for Alloy Steel Chain Slings for Overhead Lifting |
| ANSI/ASTM A 908-1996 |
不銹鋼針管規范 |
Specification for Stainless Steel Needle Tubing |
| ANSI/ASTM A 914/A 914M-1996 |
符合限制的頂端淬火要求的鋼棒規范 |
Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements |
| ANSI/ASTM A 919-1996 |
金屬熱處理的相關術語 |
Terminology Relating to Heat Treatment of Metals |
| ANSI/ASTM A 920-1996 |
具有機械特性的微合金熱鍛高質量鋼棒規范 |
Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
| ANSI/ASTM A 921/A 921M-1996 |
特殊質量微量合金熱鍛鋼棒規范.后續熱鍛件規范 |
Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |
| ANSI/ASTM A 931-1996 |
金屬絲繩和絞線拉伸試驗的試驗方法 |
Test Method for the Tension Testing of Wire Ropes and Strand |
| ANSI/ASTM A 932-2001 |
使用萬用表法在電源頻率下測試片狀試樣非晶材料交流電磁特性的試驗方法 |
Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens |
| ANSI/ASTM A 937/A 937M-2001 |
使用兩個相臨的試驗表面的絕緣涂層的層間電阻測定的試驗方法 |
Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces |
| ANSI/ASTM A 939-1996 |
圓柱體鍛件表面砂心的超聲波檢驗的試驗方法 |
Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings |
| ANSI/ASTM A 940-1996 |
渦輪轉子用的差溫?zé)崽幚碚婵仗幚砗辖痄撳懠?guī)范 |
Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com