標準號 |
中文名稱 |
英文名稱 |
| ANSI C 29.13-2000 |
絕緣子.組合分布固定型 |
Insulators - Composite Distribution Deaded Type |
| ANSI C 29.17-2001 |
絕緣子.復合.線路后置形 |
Insulators-Composite-Line Post Type |
| ANSI C 29.6-1996 |
濕態加工的瓷質絕緣子.高電壓型 |
Wet-Process Porcelain Insulators - High-Voltage Pin Type |
| ANSI C 29.7-1996 |
濕態加工的瓷質絕緣子.高電壓線接線柱型 |
Wet-Process - Porcelain Insulators - High-Voltage Line-Post Type |
| ANSI C 37.06-2000 |
開關設備.以對稱電流為基礎設計的AC高壓斷路器.優選額定值和要求的相關性能 |
Switchgear - AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities |
| ANSI C 37.06.1-2000 |
以對稱電流為基礎設計的標明限用于快速瞬時恢復電壓上升時間的高壓斷路器試用指南 |
Trial-Use Guide for High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times (NOT AN AMERICAN NATIONAL STANDARD) |
| ANSI C 37.16-2000 |
低壓電力網斷路器和AC電力網保護器推薦標準.優選額定值、相關要求和應用 |
Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors, Preferred Ratings, Related Requirements and Application Recommendations for |
| ANSI C 37.17-1997 |
交流和一般用途的直流低電壓電力線路斷路器的跳閘裝置 |
Trip Devices for AC and General Purpose DC Low-Voltage Power Circuit Breakers |
| ANSI C 37.22-1997 |
用于金屬外殼開關設備的室內中等電壓開關的相關要求的電容和優先功率 |
Preferred Ratings and Related Required Capabilities for Indoor AC Medium-Voltage Switches Used in Metal-Enclosed Switchgear |
| ANSI C 37.42-1996 |
開關設備.配電斷流器和熔斷體.規范 |
Switchgear - Distribution Cutouts and Fuse Links - Specifications |
| ANSI C 37.54-1997 |
用于金屬外殼的開關設備組件的可移動件的室內交流電流高壓線路斷路器的一致性試驗規程 |
Conformance Test Procedures for Indoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear Assemblies |
| ANSI C 50.41-2000 |
發電站用多相感應馬達 |
Polyphase Induction Motors for Power Generating Stations |
| ANSI C 57.12.10-1998 |
230 kV 和低于230 kV的變壓器,833/958 至8333/10 417 kVA 單相和750/862 至 60 000/80 000/100 000 kVA 三相設備的要求 |
Transformers 230 kV and Below, 833/958 through 8333/10 417 kVA Single Phase, and 750/862 through 60 000/80 000/100 000 kVA Three Phase, Requirements for |
| ANSI C 57.12.20-1997 |
變壓器.500KVA和小于500KVA的架空型配電變壓器:高壓34500V及其以下、低壓7970V/13800YV及其以下 |
Transformers - Overhead-Type Distribution Transformers, 500 kVA and Smaller: High Voltage, 34 500 Volts and Below; Low Voltage, 7970/13 800Y Volts and Below |
| ANSI C 57.12.23-1992 |
變壓器.帶有可分離的絕緣高電壓連接器的地下類型的自冷卻,單相配電變壓器:高電壓和低電壓 |
Transformers - Underground-Type Self-Cooled, Single-Phase Distribution Transformers with Seperable, Insulated High-Voltage Connectors: High Voltage (24 940 GrdY/14 400V and Below) and Low Voltage (240/120V, 167 kVA and Smaller) |
| ANSI C 57.12.24-2000 |
變壓器.接地型三相配電變壓器, 2500 kVA和更小: 高壓34500 Grd Y/19920 V和低于該值,低壓480V和低于該值.要求 |
Transformers - Underground-Type Three-Phase Distribution Transformers, 2500 kVA and Smaller: High Voltage 34 500 Grd Y/19 920 Volts and Below; Low Voltage, 480 Volts and Below - Requirements |
| ANSI C 57.12.26-1993 |
與可分離絕緣高壓連接器一起使用的固定板分離空間型、自冷卻、三相配電變壓器的要求.高壓:34500Grd Y/19920伏特和以下,2500KVA和更小 |
Pad-Mounted Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers for Use with Separable Insulated High-Voltage Connectors, High-Voltage, 34 500 Grd Y/19 920 Volts and Below; 2500 kVA and Smaller, Requirements for |
| ANSI C 57.12.28-1999 |
開關設備和變壓器. 安裝墊片的設備.外殼完整性 |
Switchgear and Transformers - Pad-Mounted Equipment - Enclosure Integrity |
| ANSI C 57.12.29-1999 |
開關設備和變壓器.安裝墊片的設備.近海環境用外殼完整性 |
Switchgear and Transformers - Pad-Mounted Equipment - Enclosure Integrity for Coastal Environments |
| ANSI C 57.12.31-1996 |
集成附件.碳鋼電極架置型附件 |
Enclosure Integrity - Carbon Steel Pole-Mounted Enclosures |
| ANSI C 57.12.40-2000 |
地鐵和拱頂類型(浸液).要求 |
Subway and Vault Types (Liquid Immersed) - Requirements |
| ANSI C 62.61-1993 |
電話線路的氣體管電涌放電器 |
Gas Tube Surge Arresters on Wire Line Telephone Circuits |
| ANSI C 63.19-2001 |
無線通信裝置和助聽器測量的標準方法 |
Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids |
| ANSI C 63.2-1996 |
電磁噪音和磁場強度檢測儀表,10Hz-40GHz.規范 |
Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications |
| ANSI C 78.1372-1997 |
電燈.70瓦特,M98單端金屬檢鹵燈 |
Electric Lamps - 70-Watt, M98 Single-Ended Metal Halide Lamps |
| ANSI C 78.1374-1997 |
電燈.50瓦特,M110單端金屬檢鹵燈 |
Electric Lamps - 50-Watt, M110 Single-Ended Metal-Halide Lamps |
| ANSI C 78.1375-1997 |
金屬檢鹵燈.400瓦特,M59規范 |
Metal Halide Lamps, Specifications for 400-Watt, M59 |
| ANSI C 78.1376-1997 |
金屬檢鹵燈.1000瓦特,M47規范 |
Metal-Halide Lamp, 1000-Watt, M47 |
| ANSI C 78.1377-1997 |
電燈.175瓦特,M57單端金屬檢鹵燈規范 |
Electric Lamps - 175-Watt, M57 Single-Ended Metal-Halide Lamps - Specifications |
| ANSI C 78.1378-1997 |
250瓦特M58單端金屬檢鹵燈規范 |
Specifications for 250-Watt, M58 Single-Ended Metal-Halide Lamps |
| ANSI C 78.1379-1997 |
電燈,1500瓦特M48單端金屬檢鹵燈規范 |
Electric Lamps - 1500-Watt, M48 Single-Ended Metal-Halide Lamps - Specifications |
| ANSI C 78.1381-1998 |
電燈.70W、M85 金屬鹵素?zé)?/td>
| Electric Lamps - 70-Watt, M85 Metal-Halide Lamps |
| ANSI C 78.1382-1997 |
電燈.100瓦特,M90單端金屬檢鹵燈 |
Electric Lamps - 100-Watt, M90 Single-Ended Metal-Halide Lamps |
| ANSI C 78.1384-1997 |
電燈.150瓦特,M102單端金屬檢鹵燈 |
Electric Lamps - 150-Watt, M102 Single-Ended Metal-Halide Lamps |
| ANSI C 78.1385-1998 |
電燈.150W、M81 雙端金屬鹵素?zé)?/td>
| Electric Lamps - 150-Watt, M81 Double-Ended Metal-Halide Lamps |
| ANSI C 78.1386-1998 |
電燈.100瓦特,M91雙端金屬檢鹵燈 |
Electric Lamps - 100-Watt, M91 Double-Ended Metal-Halide Lamps |
| ANSI C 78.1387-2001 |
電燈.250瓦、M80雙接端金屬鹵素?zé)?/td>
| Electric Lamps - 250-Watt, M80 Double-Ended Metal Hailde Lamps |
| ANSI C 78.1403-1997 |
電燈.FCS放映燈 |
Electric Lamps - FCS Projection Lamp |
| ANSI C 78.1413-2001 |
電燈.兩英寸(51mm)集成反應器邊緣參照投影燈.中央系統的尺寸 |
Electric Lamps - Two-Inch (51-mm) Integral-Reflector-Rim Reference Projection Lamps - Dimensions of Centering Systems |
| ANSI C 78.1417-1997 |
放映燈,有GX5.3或GY5.3的1.65英寸反光燈尺寸和定中心系統 |
Projection Lamps, Dimensions and Centering System for 1.65 Inch (42-mm) Integral Reflector Lamps with GX5.3 or GY5.3 Bases |
| ANSI C 78.1420-2001 |
燈的描述.DDS,DDL,EPV,EPX,EPZ,EYG,FHX,DJT,FJX的名稱與符號 |
Lamp Descriptions: Designations DDS, DDL, EPV, EPX, EPZ, EYG, FHX, DJT, FJX |
| ANSI C 78.1430-1997 |
電燈,幻燈放映燈.帶有GX5.3基座的邊緣參照鹵鎢燈的集中的二色的1.65英寸反光器 |
Electric Lamps - Slide Projector Lamps - Condensing, Dichroic, 1.65-Inch (42mm), Integral Reflector Rim-Reference Tungsten-Halogen Lamps with GX5.3 Bases |
| ANSI C 78.1431-1997 |
電燈,幻燈放映燈.帶有GY5.3基座的邊緣參照鹵鎢燈的集中的二色的2英寸反光器 |
Electric Lamps: Slide Projector Lamps: Condensing, Dichroic, 2-Inch (51-mm), Integral Reflector, Rim-Reference Tungsten-Halogen Lamps with GY5.3 Bases |
| ANSI C 78.1432-1997 |
電燈.GZ9.5雙插頭、定焦距式燈座和36.5mm標定光源中心長度的鹵鎢燈 |
Electric Lamps - Tungsten-Halogen Lamps with GZ9.5 Two-Pin, Prefocus Bases and 36.5mm Nominal Light Center Length |
| ANSI C 78.1433-2001 |
兩英寸(51-mm)集成反應器、邊緣參照、帶GX 5.3基座的鹵鎢大屏幕放映燈. |
Two-Inch (51-mm) Integral Reflector, Rim Reference, Tungsten Halogen Large Screen Projection Lamps with GX 5.3 Bases |
| ANSI C 78.1434-2001 |
帶有GX7.9基座的鹵鎢投影燈集中二色整體反射邊 |
Condensing Dichroic Coated Integral Reflector Side Pin Tungsten Halogen Projection Lamps with GX7.9 Bases |
| ANSI C 78.1451-1995 |
電燈.鎢鹵素?zé)舴雷o(hù)罩使用的注意事項 |
Electric Lamps - Use of Protective Shields with Tungsten-Halogen Lamps - Cautionary Notice |
| ANSI C 78.1500-2001 |
電燈.有P28燈座和89mm LCL的鹵鎢燈 |
Electric Lamps - Tungsten-Halogen Lamps with P28 Bases and 89 mm LCL |
| ANSI C 78.1501-2001 |
電燈.有G22燈座和63.5mm LCL的鹵鎢燈 |
Electric Lamps - Tungsten-Halogen Lamps with G22 Bases and 63.5 mm LCL |
| ANSI C 78.1503-2001 |
電燈.有G9.5燈座和60.5mm LCL的鹵鎢燈 |
Electric Lamps - Tungsten-Halogen Lamps with G9.5 Bases and 60.5 mm LCL |
| ANSI C 78.1504-2001 |
電燈.有P28燈座和55.5mm LCL的鹵鎢燈 |
Electric Lamps - Tungsten-Halogen Lamps with P28 Bases and 55.5 mm LCL |
| ANSI C 78.1505-2001 |
電燈.有G38燈座和127mm LCL的鹵鎢燈 |
Electric Lamps - Tungsten-Halogen Lamps with G38 Bases and 127 mm LCL |
| ANSI C 78.20-1995 |
電燈.帶E26中等螺紋的類似形狀的交流白熾燈的特性 |
Electric Lamps - Characteristics of Incandescent Lamps A, G, PS, and Similar Shapes with E26 Medium Screw Bases |
| ANSI C 78.23-1995 |
電燈.熒光燈.混合類型 |
Electric Lamps - Incandescent Lamps - Miscellaneous Types |
| ANSI C 78.24-2001 |
電燈.帶前蓋的2in(51mm)整體反光燈 |
Electric Lamps - Two-Inch (51-mm) Integral Reflector Lamps with Front Covers |
| ANSI C 78.260-1998 |
管形鎢鹵燈物理特性 |
Tubular Tungsten-Halogen Lamps, Physical Characteristics |
| ANSI C 78.30-1997 |
電燈:用于燈繪圖準備的過程 |
Electric Lamps: Procedure for Use in Preparation of Lamp Space Drawings |
| ANSI C 78.370-1997 |
攝影燈的標識方法 |
Designation of Photo Lamps, Method for |
| ANSI C 78.375-1997 |
熒光燈.電氣測量指南 |
Fluorescent Lamps - Guide for Electrical Measurements |
| ANSI C 78.376-1996 |
熒光燈.色度規范 |
Fluorescent Lamps, Specifications for the Chromaticity of |
| ANSI C 78.379-1994 |
電燈.反光燈.束光線的分類 |
Electric Lamps - Reflector Lamps - Classification of Beam Patterns |
| ANSI C 78.380-1997 |
高強度放電燈.名稱與符號法 |
High-Intensity Discharge Lamps - Methods of Designation |
| ANSI C 78.387-1995 |
電燈.金屬鹵化物燈.測量特性的方法 |
Electric Lamps - Metal-Halide-Lamps - Methods of Measuring Characteristics |
| ANSI C 78.387bd-2001 |
電燈.金屬檢鹵燈.特性測量方法 |
Electric Lamps - Metal-Halide-Lamps - Methods of Measuring Characteristics |
| ANSI C 78.390-1998 |
電燈命名法.小型和聚光白熾燈 |
Method of Designation for Electric Lamps - Miniature and Sealed-Beam Incandescent Lamps |
| ANSI C 78.391-1997 |
電燈.T1和T1-3/4形狀小型燈的特性 |
Electric Lamps - Characteristics of Miniature Lamps of T1 and T1-3/4 Shapes |
| ANSI C 78.41-2001 |
電燈.低壓鈉燈指南 |
Electric Lamps - Guidelines for Low-Pressure Sodium Lamps |
| ANSI C 78.42-2001 |
電燈.高壓鈉燈 |
Electric Lamps - High-Pressure Sodium Lamps |
| ANSI C 78.5-1997 |
電燈.自鎮流熒光燈.性能指南 |
Electric Lamps - Fluorescent Self-Ballasted Lamps - Performance Guide |
| ANSI C 78.81-2001 |
熒光燈.雙基座.尺寸和電特性 |
Fluorescent Lamps - Double Based - Dimensional and Electrical Characteristics |
| ANSI C 78.901-2001 |
電燈.單頭熒光燈.尺寸和電氣特性 |
Electric Lamps - Sigle-Ended Fluorescent Lamps - Dimensional and Electrical Characteristics |
| ANSI C 80.6-1994 |
中間金屬導體.鋅涂層的(IMC) |
Intermediate Metal Conduit - Zinc Coated (IMC) |
| ANSI C 81.61a-1993 |
電燈基座 |
Electrical Lamp Bases |
| ANSI C 81.61b-1994 |
電燈燈座 |
Electrical Lamp Bases |
| ANSI C 81.61bb-2002 |
電燈基座 |
Electrical Lamp Bases |
| ANSI C 81.61c-1995 |
電燈.電燈基座 |
Electric Lamps - Electrical Lamp Bases |
| ANSI C 81.61d-1995 |
電燈基座 |
Electrical Lamp Bases |
| ANSI C 81.61e-1996 |
電燈基座.G5小型雙銷基座 |
Electrical Lamp Bases - G5 Miniature Bipin Base |
| ANSI C 81.61f-1996 |
電燈基座.E11小型螺紋基座和E17中間螺紋基座 |
Electrical Lamp Bases - E11 Mini-Can Screw Base and E17 Intermediate Screw Base |
| ANSI C 81.61g-1996 |
電燈基座.序言,內容表和附錄A和B |
Electric Lamp Bases: Foreword, Table of Contents and Annexes A and B |
| ANSI C 81.61h-1996 |
W2.1x4.9d鍥形基座.W2.1x9.2d鍥形基座 |
W2.1x4.9d Wedge Base; W2.1x9.2d Wedge Base |
| ANSI C 81.61n-1997 |
電燈基座:G16d 大型和擴展的大型端管腳管底座.電燈基座:G16d終端 |
Electric Lamps Bases: G16d Mogul and Extended Mogul End-Prong Bases; Electric Lamp Bases: G16d Termination |
| ANSI C 81.61p-1997 |
電燈基座:E10小型螺口基座 |
Electrical Lamp Bases: E10 Miniature Screw Base |
| ANSI C 81.61r-1998 |
電燈.電燈基座.內槽雙接線基座 |
Electric Lamps - Electrical Lamp Bases - Recessed Double-Contact Base |
| ANSI C 81.61s-1998 |
電燈基座:2G13 U-型熒光燈基座用*1-420-2型標準板材 |
Electric Lamp Bases: Standard Sheets *1-420-2, for 2G13 U-Shaped Fluorescent Base |
| ANSI C 81.61v-2000 |
電燈基座.BY22d 基座 |
Electric Lamps - Electrical Lamp Bases - BY22d Bases |
| ANSI C 81.61x-2001 |
電燈基座.GZ4和 P32d/PK32d 基座 |
Electrical Lamp Bases - GZ4 and P32d/PK32d Bases |
| ANSI C 81.62bb-2002 |
電燈燈座 |
Lampholders for Electric Lamps |
| ANSI C 81.62c-1995 |
電燈.電燈燈座 |
Electric Lamps - Electrical Lampholders |
| ANSI C 81.62d-1995 |
電燈頭 |
Electrical Lampholders |
| ANSI C 81.62e-1996 |
電燈燈座.G5小型雙插頭燈座和2G13 U型瑩光燈燈座 |
Electrical Lamp Bases - G5 Miniature Bipin Lampholders and 2G13 U-Shaped Fluorescent Lampholders |
| ANSI C 81.62f-1996 |
電燈燈座.E11小型螺紋燈座和E17中間螺紋燈座 |
Electrical Lamp Bases - E11 Mini-Can Screw Lampholder and E17 Intermediate Screw Lampholder |
| ANSI C 81.62g-1996 |
電燈頭.序言,內容表和附錄A,B |
Lampholders for Electric Lamps: Foreword, Table of Contents and Annexes A and B |
| ANSI C 81.62r-1998 |
電燈.電燈頭用燈座.內槽雙接線基座 |
Electric Lamps - Lampholders for Electric Lamps Caps - Recessed Double-Contact Lampholder |
| ANSI C 81.62v-2000 |
電燈.電燈用燈座.BY22d 燈座 |
Electric Lamps - Lampholders for Electrical Lamps - BY22d Lampholders |
| ANSI C 81.62x-2001 |
電燈用燈座.GZ4和P32/PK32 燈座 |
Lampholders for Electrical Lamps - GZ4 and P32/PK32 Lampholders |
| ANSI C 81.63bb-2002 |
電燈基座和燈座用量規 |
Gauges for Electric Lamp Bases and Lampholders |
| ANSI C 81.63c-1995 |
電燈.電燈底座和燈頭 |
Electric Lamps - Electrical Lamp Bases and Lampholders |
| ANSI C 81.63d-1995 |
電燈底座和燈頭量規 |
Gauges for Electric Lamp Bases and Electrical Lampholders |
| ANSI C 81.63e-1996 |
電燈底座:2G13基座G5小型雙銷基座和燈頭的扭矩試驗裝置 |
Electrical Lamp Bases: Torsion Test Devices for G5 Miniature Bipin Bases and Lampholders Go Guages for 2G13 Bases |
| ANSI C 81.63f-1996 |
電燈燈座 |
Electrical Lamp Bases |
| ANSI C 81.63g-1996 |
電燈基座和燈頭量規:前言.內容表格和附錄A和B |
Gauges for Electric Lamp Bases and Lampholders: Foreword, Table of Contents and Annexes A and B |
| ANSI C 81.63h-1996 |
W2.1x4.9d最小和最大保持量規,W2.1x9.2d最小和最大保持量規 |
W2.1x4.9d Minimum and Maximum Retention Gauge, W2.1x9.2d Minimum and Maximum Retention Gauge |
| ANSI C 81.63p-1997 |
電燈基座和燈頭量規.E10小型螺紋燈和非固定基座的不過端環量規 |
Gauges for Electric Lamp Bases and Lampholders: Not-Go Ring Gauge for E10 Miniature Screw-Based Lamps and Unmounted Bases |
| ANSI C 81.63v-2000 |
電燈.電燈和燈座用量規.BY22d 量規 |
Electric Lamps - Gauges for Electrical Lamps and Lampholders - BY22d Gauges |
| ANSI C 81.63x-2001 |
電燈基座和燈座用量規.GZ4量規 |
Gauges for Electric Lamp Bases and Lampholders - GZ4 Gauges |
| ANSI C 82.1-1997 |
熒光燈鎮流器規范 |
Specifications for Fluorescent Lamp Ballasts |
| ANSI C 82.11c-2001 |
標準性附錄A:可控鎮流器的低壓控制接口規范.信息性附錄B:可控鎮流器的命名規范 |
Normative Annex A: Specification for Low Voltage Control Interface for Controllable Ballasts and Informative Annex B: Specification for Nomenclature for Controllabe Ballasts |
| ANSI C 82.12-1999 |
電燈鎮流器.鎮流匹配器 |
Lamp Ballasts - Ballasted Adaptors |
| ANSI C 82.77-2001 |
燈的鎮流器.諧波發射限值.照明設備的有關電源的質量要求 |
Lamp Ballasts-Harmonic Emission Limits-Related Power Quality Requirements for Lighting Equipment |
| ANSI C 82.9-1996 |
高強度放電和低壓鈉燈.鎮流器和變壓器.定義 |
High-Intensity-Discharge and Low-Pressure Sodium Lamps, Ballasts and Transformers - Definitions |
| ANSI C 93.1-1999 |
輸電線載波耦合電容器和耦合電容器電壓變壓器(CCVT).要求 |
Power Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT) - Requirements |
| ANSI C 93.5-1997 |
單一功能動力線傳輸發射/接收要求 |
Requirements for Single Function Power-Line Carrier Transmitter/Receiver Equipment |
| ANSI C119.1-1986 |
電連接器.額定電壓為600伏的密封絕緣式地下連接器系統 |
Electric Connectors - Sealed Insulated Underground Connector Systems Rated 600 Volts |
| ANSI C119.1-2002 |
額定600伏的密封絕緣地下連接器系統 |
(Sealed Insulated Underground Connector System Rated 600 Volts ) |
| ANSI C119.4-1991 |
電連接器.架空導線使用的裸鋁-鋁或鋁-銅連接器 |
Electric Connectors - Connectors for Use Between Aluminum-to-Aluminum or Aluminum- to-Copper Bare Overhead Conductors |
| ANSI C119.4-2003 |
電連接器.鋁鋁間或鋁銅間架空裸線連接接器 |
(Electric Connectors - Connectors for Use between Aluminum-to-Aluminum or Aluminum-to-Copper Bare Overhead Connectors ) |
| ANSI C12.10-2004 |
機電式瓦特表 |
|
| ANSI C12.11-1987 |
收費測量值為10千伏-350千伏BIL(0.6千伏-69千伏的NSV)儀用互感器 |
Instrument transformers for revenue metering, 10 kV BIL through 350 kV (0.6 kV NSV through 69 kV NSV) |
| ANSI C12.13-1991 |
電度表的工作計時器 |
Electronic time-of-use registers for electricity meters |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com