標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM D 4127-2002 |
用于離子選擇電極的術語 |
Terminology Used with Ion-Selective Electrodes |
| ANSI/ASTM D 4161-2001 |
使用柔性彈性密封對纖維玻璃(玻璃纖維增強熱固樹脂)管的接頭的規范 |
Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Joints Using Flexible Elastomeric Seals (08.04) |
| ANSI/ASTM D 4167-1991 |
纖維增強塑料風扇和鼓風機規格 |
Specification for Fiber-Reinforced Plastic Fans and Blowers (08.04) |
| ANSI/ASTM D 4170-1993 |
潤滑脂對磨損侵蝕防護的試驗方法 |
Test Method for Fretting Wear Protection by Lubricating Grease (05.02) |
| ANSI/ASTM D 4171-1991 |
燃料系統防凍劑規范 |
Specification for Fuel System Icing Inhibitors (05.02) |
| ANSI/ASTM D 4172-1994 |
潤滑液防磨性的試驗方法(四球法) |
Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method), Method of Test for (05.02) |
| ANSI/ASTM D 4174-1989 |
石油液壓系統的清潔、沖洗和凈化實施規程 |
Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems, Practice for the (05.02) |
| ANSI/ASTM D 4175-1992 |
石油、石油產品和潤滑脂相關術語 |
Petroleum, Petroleum Products, and Lubricants, Terminology Relating to (05.03) |
| ANSI/ASTM D 4176-2002 |
蒸餾燃料中游離水和粒子污染物的試驗方法(清潔和透明通過/停止程序) |
Test Method for Free Water and Particulate Contamination in Distillate Fuels (Clear and Bright Pass/Fail Proceedings) (05.02) |
| ANSI/ASTM D 4177-1982 |
石油及石油產品的自動取樣的方法 |
Automatic Sampling of Petroleum and Petroleum Products, Method for the (05.02) |
| ANSI/ASTM D 4178-1982 |
濕氣分析儀校準的實施規程 |
Calibrating Moisture Analyzers, Practice for (05.02) |
| ANSI/ASTM D 4181-1995 |
乙縮醛(POM)模塑擠壓材料的規范 |
Specification for Acetal (POM) Molding and Extrusion Materials (08.02) |
| ANSI/ASTM D 4195-2001 |
反滲透應用的水分析指南 |
Guide for Water Analysis for Reverse Osmosis Application |
| ANSI/ASTM D 4203-1995 |
苯乙烯丙烯氰注射和擠壓材料規范 |
Specification for Styrene Acrylonitrile (SAN) Injection and Extrusion Materials (08.02) |
| ANSI/ASTM D 4216-1992 |
剛性聚氯乙烯(PVC)和相關塑料建筑產品組分的標準規格 |
Rigid Poly (Vinyl Chloride) (PVC) and Related Plastic Building Products Compounds, Standard Specification for (08.04) |
| ANSI/ASTM D 4218-1996 |
使用隔焰爐技術對聚乙烯化合物中碳黑含量的試驗方法 |
Test Method for Carbon Black Content in Polyethylene Compounds by the Muffle-Furnace Technique (08.03) |
| ANSI/ASTM D 4225-1990 |
苯乙烯-丁二烯薄板規范 |
Specification for Styrene-Butadiene Sheeting (08.03) |
| ANSI/ASTM D 4226-1995 |
剛性聚氯乙烯(PVC)建筑產品抗沖擊性的試驗方法 |
Test Method for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products (95-1, Item 42) (08.02) |
| ANSI/ASTM D 4241-1992 |
氣體渦輪發電機潤滑油系統的設計 |
Gas Turbine Generator Lubricating Oil System, Design of (05.02) |
| ANSI/ASTM D 4244-1995 |
重負載和超重負載丙烯腈丁二烯聚氯乙烯(NBR PVC)電線和電纜護套通用規范 |
Specification for General-Purpose, Heavy-Duty and Extra-Heavy Duty Acrylonitrile-Butadiene Polyvinyl Chloride (NBR PVC) Jackets for Wire and Cable (10.02) |
| ANSI/ASTM D 4247-1995 |
黑色重負載和超重負載聚氯丁二烯電線和電纜護套通用規范 |
Specification for General-Purpose Black Heavy-Duty and Black Extra-Heavy Duty Polychloroprene Jackets for Wire and Cable (10.02) |
| ANSI/ASTM D 4248-1992 |
蒸氣渦輪發電機供油系統的設計 |
Design of Steam Turbine Generator Oil Systems (05.02) |
| ANSI/ASTM D 4272-1999 |
通過裝有測量儀器的鏢墜落法測量塑料薄膜耐沖擊性的試驗方法 |
Plastic Film by Instrumented Dart Drop, Test Method for Impact Resistance of (08.03) |
| ANSI/ASTM D 4273-1995 |
聚氨基甲酸乙酯原材料的試驗方法:聚醚多醇初始羥基含量的測定 |
Method for Testing Polyurethane Raw Materials: Determination of Primary Hydroxyl Contents of Polyether Polyols (08.02) |
| ANSI/ASTM D 4274-1994 |
聚氨酯多醇原材料的測試方法:多醇羥基數的測定 |
Method for Testing Polyurethane Polyol Raw Materials: Determination of Hydroxyl Numbers of Polyols (08.03) |
| ANSI/ASTM D 4275-1991 |
用氣相色譜法對乙烯高聚物和乙烯乙酸乙烯共聚物的丁基化羥基甲苯的試驗方法 |
Test Method for Determination of Butylated Hydroxytoluene (BHT) in Polymers of Ethylene and EthyleneVinyl Acetate (EVA) Copolymers by Gas Chromatography (08.03) |
| ANSI/ASTM D 4276-1996 |
有限通道面積實施規程 |
Practice for Confined Area Entry |
| ANSI/ASTM D 4278-1996 |
無機化學分析用木質樣品制備的濕灰化程序的試驗方法 |
Test Method for Wet Ashing Procedure for Preparing Wood Samples for Inorganic Chemical Analysis |
| ANSI/ASTM D 4289-1995 |
彈性潤滑脂兼容性的試驗方法 |
Method of Testing Compatibility of Lubricating Grease with Elastomers (05.02) |
| ANSI/ASTM D 4290-1988 |
加速狀態下測定汽車輪軸承脂漏泄傾向的試驗方法 |
Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions, Method of Test for (05.02) |
| ANSI/ASTM D 4291-1993 |
用過的發動機油中痕量乙二醇的試驗方法 |
Trace Ethylene Glycol in Used Engine Oil, Test Method for (05.02) |
| ANSI/ASTM D 4292-1992 |
煅燒石油焦振動松密度的試驗方法 |
Vibrated Bulk Density of Calcined Petroleum Coke, Test Method for (05.03) |
| ANSI/ASTM D 4293-1983 |
渦輪機潤滑用磷酸鹽酯基液體規范 |
Phosphate Ester Based Fluids for Turbine Lubrication, Specification for (05.02) |
| ANSI/ASTM D 4294-1998 |
用非色散X射線熒光光譜分析法測定石油產品中硫含量的試驗方法 |
Sulfur in Petroleum Products by Non-Dispersive X-Ray Fluorescence Spectrometry, Method of Test for (05.02) |
| ANSI/ASTM D 4298-1991 |
確定溯源性的比對滲透管指南 |
Guide for Intercomparing Permeation Tubes to Establish Traceability |
| ANSI/ASTM D 4302-1995 |
在低溫和輕負載條件下用氣線和操作燃料火星點火內燃引擎磨損和沉積結構 抑制自動引擎油評估的試驗方法 |
Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustions Engine Fueled with Gasline and Operated under Low-Temperature, Light-Duty Conditions (06.02) |
| ANSI/ASTM D 4304-1984 |
汽輪機或蒸氣輪機用礦物潤滑油的規范 |
Mineral Lubricating Oil Used in Steam or Gas Turbines, Specification for (05.02) |
| ANSI/ASTM D 4305-1994 |
低溫下航空燃料濾膜流動的試驗方法 |
Filter Flow of Aviation Fuels at Low Temperature, Method of Test for (05.02) |
| ANSI/ASTM D 4306-2001 |
由痕量污染引起的試驗航空燃料取樣的操作規范 |
Practice for Sampling Aviation Fuel for Tests Affected by Trace Contamination (05.02) |
| ANSI/ASTM D 4307-1994 |
用作分析標準的液態混合物制備的實施規程 |
Preparation of Liquid Blends for Use as Analytical Standards, Practice for (05.02) |
| ANSI/ASTM D 4308-1995 |
用精密儀表對液態烴電導率的測試方法 |
Electrical Conductivity of Liquid Hydrocarbons by Precision Meter, Test Method for (05.02) |
| ANSI/ASTM D 4309-2002 |
為測定水中總金屬含量而使用密閉容器微波加熱技術分解樣品的實施規范 |
Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water |
| ANSI/ASTM D 4310-1983 |
抑制機油淤泥和腐蝕趨勢測定的試驗方法 |
Sludging Tendencies of Inhibited Mineral Oils, Test Method for the Determination of the (05.02) |
| ANSI/ASTM D 4314-1995 |
重負載和超重負載交叉鏈環的氯磺化聚乙烯電線和電纜護套的通用規范 |
Specification for General Purpose Heavy-Duty and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene Jackets for Wire and Cable (10.02) |
| ANSI/ASTM D 4321-1991 |
塑料薄膜包裝能力的試驗方法 |
Test Method for Package Yield of Plastic Film (08.02) |
| ANSI/ASTM D 4323-1992 |
通過反射變化的比率對空氣中硫化氫的試驗方法 |
Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance |
| ANSI/ASTM D 4340-1998 |
在排熱條件下發動機冷卻劑中鑄造鋁合金腐蝕性的試驗方法 |
Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants under Heat-Rejecting Conditions |
| ANSI/ASTM D 4349-1989 |
聚苯撐乙醚材料的規格 |
Specification for Polyphenylene Ether (PPE) Materials (08.03) |
| ANSI/ASTM D 4350-1986 |
塑料和填料的腐蝕性指數的測試方法 |
Plastics and Fillers, Test Method for Corrositivity Index of (08.03) |
| ANSI/ASTM D 4352-1997 |
電氣級氧化鎂中磁性材料雜質測定用試驗方法 |
Test Method for Determination of Magnetic Material Impurities in Electrical Grade Magnesium Oxide |
| ANSI/ASTM D 4356-1997 |
建立一致性試驗方法公差的實施規范 |
Practice for Establishing Consistent Test Method Tolerances |
| ANSI/ASTM D 4357-1985 |
粗紗和線紗玻璃織物制塑料層壓制品規格 |
Plastic Laminates Made from Woven Roving and Woven Yarn Glass Fabrics, Specification for (08.03) |
| ANSI/ASTM D 4364-1994 |
用聚集自然陽光法實施塑料加速室外氣候老化的實施規程 |
Practice for Performing Accelerated Outdoor Weathering of Plastics Using Concentrated Natural Sunlight (08.03) |
| ANSI/ASTM D 4376-1998 |
蒸汽脫脂級四氯乙烯規范 |
Specification for Vapor-Degreasing Grade Perchloroethylene |
| ANSI/ASTM D 4377-1993 |
原油滴定中水的試驗方法 |
Test Method for Water in Crude Oils (Karl Fischer) Titration (05.02) |
| ANSI/ASTM D 4378-1992 |
蒸氣和燃氣輪機用礦物輪機油的運轉中監測 |
In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines (05.02) |
| ANSI/ASTM D 4385-1995 |
熱固增強塑料產品視覺缺陷分級的實施規程 |
Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products (94-3, Items 58, 100) (08.03) |
| ANSI/ASTM D 4392-1993 |
塑料曝露用耐水和耐光儀表(熒光UV-冷凝型)的操作規程 |
Practice for Operating Light-and Water-Exposure Apparatus (Fluorescent UV-Condensation Type) for Exposure of Plastics (08.03) |
| ANSI/ASTM D 4396-1992 |
無壓管道產品(X-15-358)的硬質聚氯乙烯(PVC)和有關塑料化合物的規范 |
Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related Plastic Compounds for Non-Pressure Piping Products (X-15-358) (08.04) |
| ANSI/ASTM D 4397-1991 |
建筑、工業和農業用聚乙烯板材規格 |
Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications (08.03) |
| ANSI/ASTM D 4413-2001 |
工作場所空氣中環氧乙烷測定的試驗方法(活性碳管法) |
Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology) |
| ANSI/ASTM D 4418-1988 |
燃氣輪機接收、存儲與處理的實施規程 |
Receipt, Storage, and Handling of Fuels for Gas Turbines, Practice for (05.02) |
| ANSI/ASTM D 4419-1990 |
用差分掃描熱量計測定石油蠟轉變溫度的試驗方法 |
Test Method for Determination of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (05.02) |
| ANSI/ASTM D 4420-1989 |
用氣相色譜法測定汽油成品中芳香化合物的試驗方法 |
Test Method for Aromatics in Finished Motor Gasoline by Gas Chromatography (05.02) |
| ANSI/ASTM D 4421-1994 |
石油焦化易揮發物的試驗方法 |
Test Method for Volatile Matters in Petroleum Coke (05.02) |
| ANSI/ASTM D 4422-1994 |
石油焦化分析灰分的試驗方法 |
Test Method for Ash in Analysis of Petroleum Coke (05.02) |
| ANSI/ASTM D 4423-1991 |
測定C4烴中羰基的試驗方法 |
Test Method for Determination of Carbonyls in C4 Hydrocarbons (05.02) |
| ANSI/ASTM D 4424-1990 |
用氣相色譜法分析丁烯的試驗方法 |
Test Method for Butylene Analysis by Gas Chromatography (05.02) |
| ANSI/ASTM D 4425-1990 |
離心法從潤滑脂中分離油的試驗方法(Koppers法) |
Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method) (05.02) |
| ANSI/ASTM D 4430-2001 |
測定氣象測量的操作可比性的實施規程 |
Practice for Determining the Operational Comparability of Meteorological Measurements |
| ANSI/ASTM D 4440-2001 |
使用動態機械程序流變測量多聚體融合物的實施規程 |
Practice for Rheological Measurement of Polymer Melts Using Dynamic Mechanical Procedures (08.03) |
| ANSI/ASTM D 4441-1991 |
聚四氟乙烯的水溶液擴散性的規范 |
Specification for Aqueous Dispersions of Polytetrafluorethylene (08.03) |
| ANSI/ASTM D 4445-1996 |
控制未處理木材的變色和形狀用殺菌劑的試驗方法(實驗室法) |
Method for Testing Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method) |
| ANSI/ASTM D 4446-1996 |
暴露在液態水環境下未處理木材的膨脹差和防水配方的抗膨脹效率測定的試驗方法 |
Test Method for Determining the Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood when Exposed to Liquid Water Environments |
| ANSI/ASTM D 445-1994 |
透明和不透明液體運動粘度的試驗方法(和動粘度的計算) |
Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity), Method of Test for (05.01) (10.03) |
| ANSI/ASTM D 446-1989 |
玻璃毛細管運動粘度計的使用說明和試驗方法 |
Operating Instructions for Glass Capillary Kinematic Viscometers, Test Method for (05.01) |
| ANSI/ASTM D 4470-1997 |
靜電起電的試驗方法 |
Test Method for Static Electrification (10.02) |
| ANSI/ASTM D 4473-2001 |
使用動態機械特性對熱固樹脂彎曲特性的測量 |
Measuring the Cure Behavior of Thermosetting Resins Using Dynamic Mechanical Properties (08.03) |
| ANSI/ASTM D 4474-1991 |
苯乙烯熱塑塑料彈性注模和擠壓材料的規格 |
Specification for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (08.03) |
| ANSI/ASTM D 4477-1997 |
硬質PVC拱面規范 |
Specification for Rigid Poly(Vinyl Chloride) (PVC) Soffit (08.04) |
| ANSI/ASTM D 4485-2001 |
引擎油性能規范 |
Specification for Performance of Engine Oils |
| ANSI/ASTM D 4486-1991 |
揮發性和活性液體動粘度的試驗方法 |
Test Method for Kinematic Viscosity of Volatile and Reactive Liquids (05.02) |
| ANSI/ASTM D 4490-1996 |
用探測管測量有毒氣體或蒸氣濃度的實施規程 |
Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes |
| ANSI/ASTM D 4495-1995 |
用落錘法對聚氯乙烯剛性外形抗沖擊性的試驗方法 |
Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight (08.04) |
| ANSI/ASTM D 4508-1992 |
塑料小片沖擊強度的測試方法 |
Test Methods for Chip Impact Strength of Plastics (08.03) |
| ANSI/ASTM D 4509-1997 |
測定新吹凈PET(生產環境測試)瓶的24小時氣室乙醛含量的試驗方法 |
Test Methods for Determining the 24-Hour Gas (Air) Space Acetaldehyde Content of Freshly Blown PET Bottles |
| ANSI/ASTM D 4514-1995 |
斷裂帶規范 |
Specification for Friction Tape (10.02) |
| ANSI/ASTM D 4515-2001 |
估算含有機組分的水樣品保持時間的實施規程 |
Practice for Estimation of Holding Time for Water Samples Containing Organic Constituents |
| ANSI/ASTM D 4529-1995 |
評定航空燃料燃燒凈熱值的測試方法 |
Estimation of Net Heat of Combustion of Aviation Fuels, Test Method for (05.02) |
| ANSI/ASTM D 4530-1985 |
石油產品殘留微粒碳的測試方法 |
Micro Carbon Residue of Petroleum Products, Test Method for (05.02) |
| ANSI/ASTM D 4532-1992 |
工作場所大氣中可吸入灰塵的試驗方法 |
Test Method for Respirable Dust in Workplace Atmospheres |
| ANSI/ASTM D 4539-1994 |
通過低溫流動試驗對柴油燃料的可濾性的試驗方法 |
Test Method for Filterability of Diesel Fuels by the Low Temperature Flow Test (Lift) Method (05.02) |
| ANSI/ASTM D 4549-1985 |
聚苯乙烯模塑和擠壓材料規范(PS) |
Specification for Polystyrene Molding and Extrusion Materials (PS) (95-1, Item 24) (08.03) |
| ANSI/ASTM D 4550-1992 |
熱塑醚.酯類彈性體規范 |
Specification for Thermoplastic Elastomer-Ether-Ester (TEEE) (08.03) |
| ANSI/ASTM D 4551-2001 |
聚氯乙烯塑料柔性隱蔽式含水薄膜的規范 |
Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane (08.04) |
| ANSI/ASTM D 4565-1994 |
遠程通信用電線和電纜絕緣和外殼的物理和環境性能特性的試驗方法 |
Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02) |
| ANSI/ASTM D 4566-1994 |
電信電線和電纜護套及絕緣的電操作性能的測試方法 |
Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02) |
| ANSI/ASTM D 4568-1993 |
評價電纜填充物和溢流件和聚烯烴線和電纜材料之間兼容性的試驗方法 |
Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Cable Materials (10.02) |
| ANSI/ASTM D 4591-2001 |
用差式掃描比色儀對熒光聚合物過渡期溫度和熱量測定的試驗方法 |
Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry |
| ANSI/ASTM D 4597-1992 |
活性碳擴散取樣器收集有機氣體或蒸氣的工作場所大氣取樣實施規程 |
Practice for Sampling Workplace Atmospheres to Collect Organic Gases or Vapors with Activated Charcoal Diffusional Samplers |
| ANSI/ASTM D 4600-1995 |
測定工作場所中可溶性苯顆粒物的方法 |
Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres |
| ANSI/ASTM D 4603-1997 |
測定聚對苯二甲酸乙二醇酯的固有粘度的測試方法 |
Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) (08.03) |
| ANSI/ASTM D 4624-1993 |
在高溫和高剪切率條件下用毛細管粘度計測量表面粘度的測試方法 |
Measuring Apparent Viscosity by Capillary Viscometer at High Temperature and High Shear Rates, Test Method for (05.02) |
| ANSI/ASTM D 4625-1992 |
在43℃(110°F)時測試餾出燃料存儲穩定性的方法 |
Distillate Fuel Storage Stability at 43C (110F), Test Method for (05.02) |
| ANSI/ASTM D 4626-1995 |
氣相色譜法響應因數的計算規程 |
Calculation of Gas Chromatographic Response Factors, Practice for (05.02) |
| ANSI/ASTM D 4627-1992 |
水溶性金屬加工液的鐵屑腐蝕試驗 |
Water Soluble Metal Working Fluids, Iron Chip Corrosion Test for (05.02) |
| ANSI/ASTM D 4628-1996 |
利用原子吸收光譜學分析報廢的潤滑油中鋇、鈣、錳和鋅的試驗方法 |
Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry, Method for (05.02) |
| ANSI/ASTM D 4629-1997 |
用氧化燃燒和化學發光檢測法測定液態石油烴中有機痕量氮的試驗方法 |
Test Method for Organically Bound Trace Nitrogen in Liquid Petroleum Hydrocarbons by Oxidative Combustion and Chemiluminescence Detection (05.02) |
| ANSI/ASTM D 4634-1986 |
苯乙烯-馬來酐材料規格 |
Styrene-Maleic Anhyride Materials (S/MA), Specification for (08.03) |
| ANSI/ASTM D 4635-2001 |
一般和包裝使用的低密度聚乙烯膜規范 |
Specification for Low-Density Polyethylene Films for General Use and Packaging Applications (08.03) |
| ANSI/ASTM D 4636-1986 |
液壓油、飛機渦輪發動機潤滑油和其他高精煉油的腐蝕性和氧化穩定性的試驗方法 |
Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils, Test Method for (05.03) |
| ANSI/ASTM D 4659-1993 |
測定聚氨基甲酸乙酯-異氰酸鹽原料比重的試驗方法 |
Polyurethane-Isocyanate Raw Materials, Determination of Specific Gravity, Method for Testing (11.01) |
| ANSI/ASTM D 4660-1990 |
測定聚氨酯異氰酸鹽原料同分異構體含量的測試方法 |
Polyurethane-Isocyanate Raw Materials, Determination of Isometer Content, Method for Testing (08.03) |
| ANSI/ASTM D 4661-1992 |
測定聚氨酯異氰酸鹽原料總氯含量的測試方法 |
Polyurethane-Isocyanate Raw Materials, Determination of Total Chlorine, Method for Testing (08.03) |
| ANSI/ASTM D 4662-1993 |
測定聚氨基甲酸乙酯原料酸堿度的試驗方法 |
Polyurethane Raw Materials, Determination of Acid and Alkalinity Numbers of Polyors, Method for Testing (08.03) |
| ANSI/ASTM D 4663-1992 |
測定聚氨酯異氰酸鹽原料水解氯的測試方法 |
Polyurethane-Isocyanate Raw Materials, Determination of Hydrolyzable Chlorine, Method for Testing (08.03) |
| ANSI/ASTM D 4667-1987 |
測定聚氨酯異氰酸鹽原料酸性的測試方法 |
Polyurethane-Isocyanate Raw Materials, Determination of Acidity, Method for Testing (08.03) |
| ANSI/ASTM D 4669-1993 |
測定聚氨基甲酸乙酯原料比重的試驗方法 |
Polyurethane Raw Materials, Determination of Specific Gravity of Polyels, Method for Testing (08.03) |
| ANSI/ASTM D 4670-1992 |
測定聚氨酯多醇原料懸浮物的測試方法 |
Urethane-Polyol Raw Materials, Determination of Suspended Matter, Method for Testing (08.03) |
| ANSI/ASTM D 4671-1987 |
聚氨酯原材料的試驗方法:多醇不飽和度的測定 |
Polyurethane Raw Materials, Determination of Unsaturation of Polyols, Method for Testing (08.03) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com