標準號 |
中文名稱 |
英文名稱 |
| ANSI/AWWA B600-2005 |
粉末狀活性碳 |
|
| ANSI/AWWA B601-2005 |
焦亞硫酸鈉 |
|
| ANSI/AWWA B603-2003 |
高錳酸鉀 |
(Potassium Permanganate ) |
| ANSI/AWWA C 104/A 21.4-1995 |
延性鐵水管和配件用水泥砂漿襯 |
Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water |
| ANSI/AWWA C 105/A 21.5-1999 |
球墨鑄鐵管系統用聚乙烯包裝物 |
Polyethylene Encasement for Ductile-Iron Pipe Systems |
| ANSI/AWWA C 110/A 21.10-1998 |
水和其他液體用球墨鑄鐵和灰口鑄鐵配件3-48英寸(75mm-1200mm) |
Ductile-Iron and Gray-Iron Fittings, 3 in through 48 in (75 mm through 1200 mm), for Water and Other Liquids |
| ANSI/AWWA C 111/A 21.11-2000 |
球墨鑄鐵壓力管和配件用橡膠墊接頭 |
Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings |
| ANSI/AWWA C 115/A 21.15-1994 |
水處理.帶延性鐵或灰口鑄鐵螺紋法蘭的法蘭延性鐵管 |
Water Treatment - Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges |
| ANSI/AWWA C 116/A 21.16-1998 |
給水服務用的可鍛鐵和灰鐵配件的內外表面的防護熔斷粘合環氧涂層 |
Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings for Water Supply Service |
| ANSI/AWWA C 150/A 21.50-1996 |
延性鐵管的厚度設計 |
Thickness Design of Ductile-Iron Pipe |
| ANSI/AWWA C 151/A 21.51-1996 |
離心鑄造的延性鐵水管 |
Ductile-Iron Pipe, Centrifugally Cast, for Water |
| ANSI/AWWA C 153/A 21.53-2000 |
給水用球墨鑄鐵壓實配件3-24英寸(76mm-610mm)及54-64英寸(1400mm-1600mm) |
Ductile-Iron Compact Fittings, 3 in. through 24 in. (76 mm Through 610 mm) and 54 in. through 64 in. (1,400 mm Through 1,600 mm), for Water Service |
| ANSI/AWWA C 200-1997 |
鋼制水管.大于和等于6英寸(150mm) |
Steel Water Pipe - 6 in (150 mm) and Larger |
| ANSI/AWWA C 203-1997 |
鋼制水管用煤焦油保護覆層和襯.瓷漆和膠帶.熱用 |
Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot-Applied |
| ANSI/AWWA C 203a-1999 |
鋼制供水管道的煤焦油保護涂層和內襯標準.搪瓷和膠帶.熱應用 |
Standard for Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot Applied |
| ANSI/AWWA C 205-2000 |
鋼制水管用水泥砂漿保護襯和覆層.大于等于4英寸(100mm).車間用 |
Cement-Mortar Protective Lining and Coating for Steel Water Pipe - 4 in (100 mm) and Larger - Shop Applied |
| ANSI/AWWA C 206-1997 |
鋼制水管的現場焊接 |
Field Welding of Steel Water Pipe |
| ANSI/AWWA C 207-2001 |
給水工程用鋼制管法蘭.4英寸-144英寸(100mm-3600mm) |
Steel Pipe Flanges for Waterworks Service -- Sizes 4 in. through 144 in. (100 mm through 3,600 mm) |
| ANSI/AWWA C 208-1996 |
預制鋼水管配件尺寸 |
Fabricated Steel Water Pipe Fittings, Dimensions for |
| ANSI/AWWA C 209-2000 |
鋼制供水管道專用型鋼、連接件和配件外部的低溫用膠帶包覆層 |
Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines |
| ANSI/AWWA C 210-1997 |
鋼制水管線的內外部用液體環氧樹脂涂層系統 |
Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines |
| ANSI/AWWA C 213-1996 |
鋼制水管線的內外部用熔融粘結環氧樹脂涂層 |
Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines |
| ANSI/AWWA C 214-2000 |
鋼制供水管道外部的膠帶包覆系統 |
Tape Coating Systems for the Exterior of Steel Water Pipelines |
| ANSI/AWWA C 215-1999 |
鋼制供水管道外部的模壓聚烯烴涂層 |
Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines |
| ANSI/AWWA C 216-2000 |
鋼制供水管道專用型鋼、連接件和配件外部的可熱收縮交聯的聚烯烴涂層 |
Heat Shrinkable Crosslinked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines |
| ANSI/AWWA C 217-1999 |
鋼制供水管道專用型鋼、連接件和配件外部的低溫用礦脂帶和礦脂臘油帶包覆層 |
Cold-Applied Petrolatum Tape and Petroleum Wax Tape Coating for the Exterior of Special Sections, Connections, and Fittings for Buried Steel Water Pipelines |
| ANSI/AWWA C 218-1999 |
地面鋼制供水管道和配件外部的涂覆 |
Coating the Exterior of Aboveground Steel Water Pipelines and Fittings |
| ANSI/AWWA C 219-2001 |
平頭管用栓接套筒型聯接器 |
Bolted, Sleeve-Type Couplings for Plain-End Pipe |
| ANSI/AWWA C 220a-1999 |
不銹鋼管.4英寸.(100 mm) 及更大. ANSI/AWWA C220a-98的附錄 |
Stainless Steel Pipe, 4 In. (100 mm) and Larger, Addendum to ANSI/AWWA C220a-98 |
| ANSI/AWWA C 221-2001 |
生產鋼制機械套筒式補償器 |
Fabricated Steel Mechanical Slip-Type Expansion Joints |
| ANSI/AWWA C 222-1999 |
鋼水管和配件的內或外的聚氨基甲酸乙酯涂層 |
Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings |
| ANSI/AWWA C 224-2001 |
鋼水管、連接件、配件及特殊部件的內、外的兩層尼龍11基聚酰胺涂覆系統 |
Two Layer Nylon-11 Based Polyamide Coating System for Interior and Exterior of Steel Water Pipe, Connections, Fittings and Special Sections |
| ANSI/AWWA C 300-1997 |
水及其他液體用鋼制圓柱形增強混凝土壓力管 |
Reinforced Concrete Pressure Pipe, Steel Cylinder Type, for Water and Other Liquids |
| ANSI/AWWA C 301-1999 |
水和其他液體用的預應力混凝土壓力管,鋼瓶型 |
Prestressed Concrete Pressure Pipe, Steel Cylinder Type, for Water and Other Liquids |
| ANSI/AWWA C 302-1995 |
非圓柱形增強混凝土壓力管 |
Reinforced Concrete Pressure Pipe, Noncylinder Type |
| ANSI/AWWA C 303-1995 |
鋼制圓柱形條繞的混凝土壓力管 |
Concrete Pressure Pipe, Bar-Wrapped, Steel Cylinder Type |
| ANSI/AWWA C 304-1999 |
預應力混凝土筒體管的設計 |
Design of Prestressed Concrete Cylinder Pipe |
| ANSI/AWWA C 400-1993 |
水及其他液體用4到6英寸的石棉水泥配給管 |
Asbestos-Cement Distribution Pipe, 4 in through 16 in, for Water and Other Liquids |
| ANSI/AWWA C 401-1993 |
給水系統用4到6英寸(100mm到400mm)的石棉水泥壓力管的選擇 |
Selection of Asbestos-Cement Pressure Pipe, 4-in through 16-in (100-mm through 400-mm) for Water Distribution Systems |
| ANSI/AWWA C 402-2000 |
給水站用石棉水泥傳輸管18 英寸至 42 英寸 (450 mm 至 1,050 mm) |
Asbestos-Cement Transmission Pipe, 18 in through 42 in (450 mm through 1,050 mm), for Water Supply Service |
| ANSI/AWWA C 403-2000 |
給水站用石棉水泥傳輸供水主管18 英寸至 42 英寸 (450 mm 至 1,050 mm)的選擇 |
Selection of Asbestos-Cement Transmission and Feeder Main Pipe, Sizes 18 in through 42 in (450 mm through 1050 mm), Practice for the |
| ANSI/AWWA C 500-1993 |
水和排水系統的滑門閥 |
Gate Valves for Water and Sewage Systems |
| ANSI/AWWA C 502-1994 |
干桶式防火給水栓 |
Hydrants, Dry Barrel Fire |
| ANSI/AWWA C 502a-1994 |
干桶式防火給水栓 |
Hydrants, Dry Barrel Fire |
| ANSI/AWWA C 504-1994 |
橡膠墊密封蝶閥 |
Rubber-Seated Butterfly Valves |
| ANSI/AWWA C 508-2001 |
2in(50mm)-24in(600mm)NPS水廠設備用擺動止回閥 |
Swing-Check Valves for Waterworks Service, 2 in (50 mm) through 24 in (600 mm) NPS |
| ANSI/AWWA C 509-2001 |
給水用彈性帶座閘閥 |
Resilient-Seated Gate Valves for Water Supply Service |
| ANSI/AWWA C 513-1997 |
明渠.預制金屬滑動門 |
Open Channel, Fabricated-Metal Slide Gates |
| ANSI/AWWA C 540-1993 |
閥門和水閘門用機動裝置 |
Power-Actuating Devices for Valves and Sluice Gates |
| ANSI/AWWA C 560-2001 |
鑄鐵水閘 |
Cast-Iron Sluice Gates |
| ANSI/AWWA C 602-2000 |
4英寸及更大的現場用輸水管道的水泥砂漿襯 |
Cement-Mortar Lining of Water Pipelines in Place - 4 in (100 mm) and Larger |
| ANSI/AWWA C 603-1996 |
石棉水泥壓力管的安裝 |
Installation of Asbestos-Cement Pressure Pipe |
| ANSI/AWWA C 605-1994 |
水處理.聚氯乙烯壓力水管和配件的地下安裝 |
Water Treatment - Underground Installation of Polyvinyl Chloride PVC Pressure Pipe and Fittings for Water |
| ANSI/AWWA C 652-1992 |
存水設備的消毒 |
Disinfection of Water-Storage Facilities |
| ANSI/AWWA C 653-1997 |
水處理設備的消毒 |
Disinfection of Water Treatment Plants |
| ANSI/AWWA C 654-1997 |
井的消毒 |
Disinfection of Wells |
| ANSI/AWWA C 700-1995 |
冷水表.位移型青銅外殼體 |
Cold-Water Meters - Displacement Type, Bronze Main Case |
| ANSI/AWWA C 702-2001 |
復合型冷水表 |
Cold Water Meters - Compound Type |
| ANSI/AWWA C 703-1996 |
防火型冷水表 |
Cold Water Meters - Fire Service Type |
| ANSI/AWWA C 704-1970 |
主管線用旋槳式冷水表 |
Cold-Water Meters - Propeller Type for Main Line Applications |
| ANSI/AWWA C 706-1996 |
冷水表用直接讀取的遙控讀數系統 |
Direct-Reading Remote-Registration Systems for Cold-Water Meters |
| ANSI/AWWA C 707-1982 |
冷水表用編碼器式遙控讀數系統 |
Water Meters, Encoder-Type, Remote-Registration Systems for Cold |
| ANSI/AWWA C 708-1996 |
多噴嘴式冷水表 |
Cold-Water Meters - Multijet Type |
| ANSI/AWWA C 708a-1997 |
冷水表.多噴水口型 |
Cold-Water Meters - Multijet Type |
| ANSI/AWWA C 710-1995 |
冷水表.位移型.塑料外殼體 |
Cold Water Meters - Displacement Type - Plastic Main Case |
| ANSI/AWWA C 712-2002 |
冷水表.單頭噴射型 |
Cold-Water Meters - Singlejet Type |
| ANSI/AWWA C 800-2001 |
地下管道閥門和配件 |
Underground Service Line Valves and Fittings |
| ANSI/AWWA C 901-1996 |
給水用1/2到3英寸(13-76毫米)聚乙烯壓力管 |
Polyethylene (PE) Pressure Pipe and Tubing, 1/2 in (13 mm) through 3 in (76 mm), for Water Service |
| ANSI/AWWA C 906-1999 |
配水用聚乙烯壓力管和配件,4英寸至63英寸 |
Polyethylene (PE) Pressure Pipe and Fittings, 4 in through 63 in for Water Distribution |
| ANSI/AWWA C 908-1997 |
聚氯乙烯管用聚氯乙烯自攻T字接頭 |
PVC Self-Tapping Saddle Tees for Use on PVC Pipe |
| ANSI/AWWA C 950-2001 |
玻璃纖維壓力管 |
Fiberglass Pressure Pipe |
| ANSI/AWWA C104/A 21.4-2004 |
球墨鑄鐵水管和配件用水泥砂漿襯 |
|
| ANSI/AWWA C104/A 21.4-2004 |
球墨鑄鐵水管和配件用水泥砂漿襯 |
(Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water ) |
| ANSI/AWWA C110/A 21.10-2003 |
水和其它液體用球墨鑄鐵和灰口鐵配件3-48英寸(75mm-1200mm) |
(Ductile-Iron and Gray-Iron Fittings, 3 in through 48 in (75 mm through 1200 mm), for Water and Other Liquids ) |
| ANSI/AWWA C116/A 21.16-2003 |
給水設備用球墨鑄鐵和灰鐵配件的內外表面的防護熔融膠合環氧涂層 |
(Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings for Water Supply Service ) |
| ANSI/AWWA C213a-2002 |
鋼制水管內外熔融膠合環氧樹脂涂層 |
(Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines ) |
| ANSI/AWWA C215-2004 |
鋼制水管的外層用擠壓聚烯烴涂層 |
|
| ANSI/AWWA C218-2002 |
地面鋼制供水管道和配件外部的涂覆 |
(Coating the Exterior of Aboveground Steel Water Pipelines and Fittings ) |
| ANSI/AWWA C223-2002 |
結構鋼和不銹鋼開口套管 |
(Fabricated Steel and Stainless Steel Tapping Sleeves ) |
| ANSI/AWWA C225-2002 |
鋼制水管外層用溶解的聚烯烴涂覆系統 |
(Fused Polyolefin Coating Systems for the Exterior of Steel Water Pipelines ) |
| ANSI/AWWA C300-2004 |
水及其他液體用鋼制圓柱形加筋混凝土壓力管 |
|
| ANSI/AWWA C302-2004 |
非圓柱形鋼筋混凝土壓力管 |
|
| ANSI/AWWA C303-2002 |
鋼制圓柱形條繞的混凝土壓力管 |
(Concrete Pressure Pipe, Bar-Wrapped, Steel Cylinder Type ) |
| ANSI/AWWA C401-2003 |
配水系統用4到16英寸(100mm到400mm)的石棉水泥壓力管的選擇 |
(Selection of Asbestos-Cement Pressure Pipe, 4-in through 16-in (100-mm through 400-mm) for Water Distribution Systems ) |
| ANSI/AWWA C500-2002 |
水和排水系統的滑門閥 |
(Gate Valves for Water and Sewage Systems ) |
| ANSI/AWWA C503-2005 |
濕筒消防栓 |
|
| ANSI/AWWA C507-2005 |
從6英寸(150mm)到48英寸(1200mm)的球閥 |
|
| ANSI/AWWA C512-2004 |
給水裝置用放氣閥、空氣/真空和混合空氣閥 |
|
| ANSI/AWWA C513-2005 |
明渠預制金屬滑動閘門和明渠預制金屬溢流堰閘門 |
|
| ANSI/AWWA C540-2002 |
閥門和水閘門用機動裝置 |
(Power-Actuating Devices for Valves and Sluice Gates ) |
| ANSI/AWWA C550-2005 |
閥門和給水栓用防護性內部涂層 |
|
| ANSI/AWWA C561-2004 |
裝配式不銹鋼推拉門的AWWA標準 |
|
| ANSI/AWWA C561-2004 |
裝配式不銹鋼推拉門的AWWA標準 |
(AWWA Standard for Fabricated Stainless Steel Slide Gates ) |
| ANSI/AWWA C563-2004 |
預制合成滑動門 |
|
| ANSI/AWWA C606-2004 |
帶槽和帶肩的接頭 |
|
| ANSI/AWWA C651-2005 |
消毒總水管 |
|
| ANSI/AWWA C653-2002 |
水處理設備的消毒 |
(Disinfection of Water Treatment Plants ) |
| ANSI/AWWA C654-2003 |
井的消毒 |
(Disinfection of Wells ) |
| ANSI/AWWA C700-2002 |
位移型青銅外殼體冷水表 |
(Cold-Water Meters - Displacement Type, Bronze Main Case ) |
| ANSI/AWWA C701-2002 |
用戶用渦輪式冷水表 |
(Cold Water Meters - Turbine Type for Customer Service ) |
| ANSI/AWWA C704-2002 |
主管線用旋槳式冷水表 |
(Cold-Water Meters - Propeller Type for Main Line Applications ) |
| ANSI/AWWA C707-2005 |
冷水表用編碼器式遙控讀數系統 |
|
| ANSI/AWWA C708-2005 |
多噴嘴式冷水表 |
|
| ANSI/AWWA C710-2002 |
位移型.塑料外殼體冷水表 |
(Cold Water Meters - Displacement Type - Plastic Main Case ) |
| ANSI/AWWA C712-2002 |
冷水表.單頭噴射型 |
(Cold-Water Meters - Singlejet Type ) |
| ANSI/AWWA C713-2005 |
冷水表.射流振蕩器型 |
|
| ANSI/AWWA C750-2003 |
全閉路導管中渡越時間流量計 |
(Transit-Time Flowmeters in Full Closed Conduits ) |
| ANSI/AWWA C800-2005 |
地下管道閥門和配件 |
|
| ANSI/AWWA C901-2002 |
給水用1/2到3英寸(13-76毫米)聚乙烯壓力管 |
(Polyethylene (PE) Pressure Pipe and Tubing, 1/2 in (13 mm) through 3 in (76 mm), for Water Service ) |
| ANSI/AWWA C903-2005 |
給水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-鋁-聚乙烯和交聯聚乙烯-鋁-交聯聚乙烯復合壓力管 |
|
| ANSI/AWWA D 100-1996 |
儲水用鋼制焊接箱 |
Welded Steel Tanks for Water Storage |
| ANSI/AWWA D 102-1997 |
有涂層的鋼制儲水箱 |
Coating Steel Water - Storage Tanks |
| ANSI/AWWA D 104-1997 |
自動控制的鋼制水箱內部的外加電流陰極保護 |
Automatically Controlled, Impressed-Current Cathodic Protection for the Interior of Steel Water Tanks |
| ANSI/AWWA D 110-1995 |
繞組環形預應力混凝土水箱 |
Wire-Wound, Circular Prestressed Concrete Water Tanks |
| ANSI/AWWA D 110a-1996 |
金屬絲和金屬絲繩纏繞的環形預應力混凝土 |
Wire- and Strand-Wound Circular-Prestressed Concrete |
| ANSI/AWWA D 115-1995 |
帶有環形預應力鋼筋的環形預應力混凝土水箱標準 |
Standard for Circular Prestressed Concrete Water Tanks with Circumferential Tendons |
| ANSI/AWWA D 130-1996 |
便攜式儲水用柔性薄膜襯和浮動式蓋材料 |
Flexible-Membrane-Lining and Floating-Cover Materials for Potable Water Storage |
| ANSI/AWWA D102-2003 |
有涂層的鋼制儲水箱 |
(Coating Steel Water - Storage Tanks ) |
| ANSI/AWWA D120-2002 |
熱固玻璃增強纖維塑料水箱 |
(Thermosetting Fiberglass-Reinforced Plastic Tanks ) |
| ANSI/AWWA D130-2002 |
便攜式儲水裝置用柔性薄膜襯和浮動式蓋材料 |
(Flexible-Membrane-Lining and Floating-Cover Materials for Potable Water Storage ) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com