標準號 |
中文名稱 |
英文名稱 |
| BS 4401-11-1995 |
肉及肉制品的試驗方法.第11部分:羥基脯氨酸含量的測定 |
(Methods of test for meat and meat products - Determination of hydroxyproline content) |
| BS 4401-12-1979 |
肉及肉制品的試驗方法.第12部分:肉制品中淀粉含量的測定(比較法) |
(Methods of test for meat and meat products - Determination of starch content of meat products (reference method)) |
| BS 4401-13-1979 |
肉及肉制品的試驗方法.第13部分:葡萄糖酸-δ－內酯含量的測定(比較法) |
(Methods of test for meat and meat products - Determination of glucono-delta-lactone content (reference method)) |
| BS 4401-14-1979 |
肉及肉制品的試驗方法.第14部分:Ｌ－(＋)－谷氨酸含量的測定(比較法) |
(Methods of test for meat and meat products - Determination of L-(+)-glutamic acid content (reference method)) |
| BS 4401-15-1981 |
肉及肉制品的試驗方法.第15部分:多磷酸鹽的檢測 |
(Methods of test for meat and meat products - Detection of polyphosphates) |
| BS 4401-16-1996 |
肉及肉制品的試驗方法.氯化物含量的測定(電位測量法) |
(Methods of test for meat and meat products - Determination of chloride content (potentiometric method)) |
| BS 4401-17-1998 |
肉及肉制品的試驗方法.氯霉素含量的測定(液相法) |
(Methods of test for meat and meat products - Determination of chloramphenicol content (liquid chromatographic method)) |
| BS 4401-18-1998 |
肉及肉制品的試驗方法.淀粉和葡萄糖含量的測定(酶催法) |
(Methods of test for meat and meat products - Determination of starch and glucose contents (enzymatic method)) |
| BS 4401-2-1980 |
肉及肉制品的試驗方法.第2部分:氮含量的測定(比較法) |
(Methods of test for meat and meat products - Determination of nitrogen content (reference method)) |
| BS 4401-3-1997 |
肉及肉制品的試驗方法.第3部分:水份含量的測定(比較法) |
(Methods of test for meat and meat products - Determination of moisture content (reference method)) |
| BS 4401-4-1970 |
肉及肉制品的試驗方法.第4部分:全脂肪含量的測定 |
(Methods of test for meat and meat products - Determination of total fat content) |
| BS 4401-5-1996 |
肉及肉制品的試驗方法.第5部分:游離脂肪含量的測定 |
(Methods of test for meat and meat products - Determination of free fat content) |
| BS 4401-6-1996 |
肉及肉制品的試驗方法.第6部分:氯化物的測定(伏哈德法) |
(Methods of test for meat and meat products - Determination of chloride content (Volhard method)) |
| BS 4401-7-1976 |
肉及肉制品的試驗方法.第7部分:硝酸鹽含量的測定 |
(Methods of test for meat and meat products - Determination of nitrate content) |
| BS 4401-8-1976 |
肉及肉制品的試驗方法.第8部分:亞硝酸鹽含量的測定 |
(Methods of test for meat and meat products - Determination of nitrite content) |
| BS 4401-9-1976 |
肉及肉制品的試驗方法.第9部分:pH值的測量 |
(Methods of test for meat and meat products - Measurement of pH) |
| BS 4405-1990 |
液體肥皂規范 |
(Specification for liquid soap) |
| BS 4406-1969 |
漁網結網線的特數制命名規范 |
(Specification for the designation in the tex system of netting yarns for fishing nets) |
| BS 4407-1988 |
纖維混紡織物的定量分析方法 |
(Methods for quantitative analysis of fibre mixtures) |
| BS 4409-1-1991 |
螺旋輸送機.第1部分:固定式槽型規范 |
(Screw conveyors - Specification for fixed trough type) |
| BS 4409-2-1991 |
螺旋輸送機.第2部分:輕型和移動式(螺旋推運器)規范 |
(Screw conveyors - Specification for portable and mobile type (augers)) |
| BS 4409-3-1982 |
螺旋輸送機.第3部分:傳動功力的計算方法 |
(Screw conveyors - Method for calculating drive power) |
| BS 4411-1969 |
木材切割用帶鋸條規范 |
(Specification for woodcutting bandsaw blades) |
| BS 4415-1-1992 |
紙和紙板抗拉性能測定.恒定加載率法 |
(Determination of the tensile properties of paper and board - Constant rate of loading method) |
| BS 442-1950 |
鐵路信號用電氣裝置的接線端規范 |
(Specification for terminals for electrical apparatus for railway signalling purposes) |
| BS 4420-1990 |
紙、紙板粗糙度測定的本特森測定方法 |
(Method for determination of the Bendtsen roughness of paper and board) |
| BS 4422-1-1987 |
火災術語詞匯.第1部分:火災的一般術語和現象 |
(Glossary of terms associated with fire - General terms and phenomena of fire) |
| BS 4422-2-1990 |
火災術語詞匯.結構防火 |
(Glossary of terms associated with fire - Structural fire protection) |
| BS 4422-3-1990 |
火災術語詞匯.火災的檢測和警報 |
(Glossary of terms associated with fire - Fire detection and alarm) |
| BS 4422-4-1994 |
火災術語詞匯.滅火設備 |
(Glossary of terms associated with fire - Fire extinguishing equipment) |
| BS 4422-5-1989 |
火災術語詞匯.第5部分:煙控制 |
(Glossary of terms associated with fire - Smoke control) |
| BS 4422-6-1988 |
火災術語詞匯.第6部分:撤離和疏散設施 |
(Glossary of terms associated with fire - Evacuation and means of escape) |
| BS 4422-7-1988 |
火災術語詞匯.第7部分:爆炸檢測和抑制方法 |
(Glossary of terms associated with fire - Explosion detection and suppression means) |
| BS 4422-9-1990 |
火災術語詞匯.第9部分:船舶消防術語 |
(Glossary of terms associated with fire - Marine terms) |
| BS 4427-1-1969 |
工業用三磷酸鈉(三磷酸五鈉)和焦磷酸鈉(焦磷酸四鈉)的試驗方法.第1部分:三磷酸鈉中水不溶物質含量的測定 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of matter insoluble in water in sodium tr) |
| BS 4427-10-1976 |
工業用三磷酸鈉(三磷酸五鈉)和焦磷酸鈉(焦磷酸四鈉)的試驗方法.第10部分:全氧化磷(V)含量的測定:磷鉬酸喹啉 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of total phosphorus (V) oxide content: qu) |
| BS 4427-11-1983 |
工業用三磷酸鈉(三磷酸五鈉)和焦磷酸鈉(焦磷酸四鈉)的試驗方法.第11部分:用柱色譜法分離并測定不同類型的磷 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Separation by column chromatography and determination o) |
| BS 4427-12-1979 |
工業用三磷酸鈉(三磷酸五鈉)和焦磷酸鈉(焦磷酸四鈉)的試驗方法.工業(包括食品)用縮聚磷酸鹽.砷含量的測定. |
() |
| BS 4427-14-1989 |
工業用三磷酸鈉(三磷酸五鈉)和焦磷酸鈉(焦磷酸四鈉)的試驗方法.第14部分:工業(包括食品)用縮聚磷酸鹽:氯化 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Condensed phosphates for industrial use (including food) |
| BS 4427-15-1982 |
工業用三磷酸鈉(三磷酸五鈉)和焦磷酸鈉(焦磷酸四鈉)的試驗方法.第15部分:工業(包括食品)用縮聚磷酸鹽.氧化 |
() |
| BS 4427-2-1969 |
工業用三磷酸鈉(三磷酸五鈉)和焦磷酸鈉(焦磷酸四鈉)的試驗方法.第2部分:三磷酸鈉pH值的測定 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Measurement of pH value of sodium tripolyphosphate) |
| BS 4427-3-1989 |
工業用三磷酸鈉(三磷酸五鈉)和焦磷酸鈉(焦磷酸四鈉)的試驗方法.第3部分:工業(包括食品)用縮聚磷酸鹽鐵含量 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Condensed phosphates for industrial use (including food) |
| BS 4427-4-1969 |
工業用三磷酸鈉(三磷酸五鈉)和焦磷酸鈉(焦磷酸四鈉)的試驗方法.第4部分:燒失量的測定 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of loss on ignition) |
| BS 4427-5-1974 |
工業用三磷酸鈉(三磷酸五鈉)和焦磷酸鈉(焦磷酸四鈉)的試驗方法.第5部分:粒度分布的測定 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of particle size distribution) |
| BS 4427-6-1974 |
工業用三磷酸鈉(三磷酸五鈉)和焦磷酸鈉(焦磷酸四鈉)的試驗方法.第6部分:焦磷酸鈉中焦磷酸鹽(含量)的估算 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Estimation of pyrophosphate content of sodium pyrophosp) |
| BS 4428-1989 |
一般園林經營管理的實用規程(不包括硬質地面) |
(Code of practice for general landscape operations (excluding hard surfaces)) |
| BS 4429-1987 |
一般工程、起重和吊管器用夾索螺旋夾具和螺旋扣規范 |
(Specification for rigging screws and turnbuckles for general engineering, lifting purposes and pipe hanger applications) |
| BS 4430-2-1969 |
工業機動車輛安全推薦.第2部分:操作和維護 |
(Recommendations for the safety of powered industrial trucks - Operation and maintenance) |
| BS 4431-1989 |
液化無水氨的取樣和試驗方法 |
(Methods of sampling and test for liquefied anhydrous ammonia) |
| BS 4432-1-1995 |
紙漿、紙與紙板光學特性的測定方法.第1部分:紙,紙板及紙漿的漫反射因數的測量 |
(Methods for determining optical properties of pulp, paper and board - Measurement of diffuse reflectance factor of paper, board and pulps) |
| BS 4433-1-1994 |
額定輸出達45KW的家用固體礦物燃料鍋爐.帶有爐底除灰的鍋爐的規范 |
(Domestic solid mineral fuel fired boilers with rated output up to 45 kW - Domestic solid mineral fuel fired boilers with rated output up to 45 kw - Specification for boilers with undergrate ash remova) |
| BS 4433-2-1994 |
額定輸出達45KW的家用固體礦物燃料鍋爐.燒小塊無煙煤的重力給煤鍋爐規范 |
(Domestic solid mineral fuel fired boilers with rated output up to 45 kW - Specification for gravity feed boilers designed to burn small anthracite) |
| BS 4436-1978 |
前伸式和龍門式起重叉車規范.穩定性試驗 |
(Specification for reach and straddle fork lift trucks - stability tests) |
| BS 4438-1969 |
文件柜和懸掛式文件袋規范 |
(Specification for filing cabinets and suspended filing pockets) |
| BS 4439-1969 |
一般用螺柱規范.米制系列 |
(Specification for screwed studs for general purposes - Metric series) |
| BS 4442-1-1969 |
車床軸頭及面板規范.第1部分:A 式和卡姆洛克式 |
(Specification for lathe spindle noses and faceplates - Types ’A’ and ’Camlock’) |
| BS 4443-7-1992 |
軟質微孔材料的試驗方法.第7部分:方法17:用整皮測定軟質微孔材料撕裂強度的方法.方法18:在潮濕條件下測定加 |
(Methods of test for flexible cellular materials - Method 17 - Determination of tear strength of flexible cellular material with an integral skin - Method 18 - Determination of compression set under hu) |
| BS 4444-1989 |
電氣接地監測和保護線檢驗指南 |
(Guide to electrical earth monitoring and protective conductor proving) |
| BS 4445-1969 |
烴類原料氣化和轉化裝置的試驗一覽表 |
(Schedule of tests for gasification and reforming plants using hydrocarbon feedstocks) |
| BS 4447-1973 |
后張結構用預應力鋼筋錨固件性能規范 |
(Specification for the performance of prestressing anchorages for post-tensioned construction) |
| BS 4448-1988 |
學生用練習簿及其紙張規范 |
(Specification for school exercise books and papers) |
| BS 4449-1997 |
混凝土配筋用碳素鋼筋規范 |
(Specification for carbon steel bars for the reinforcement of concrete) |
| BS 4449-2005 |
混凝土配筋用鋼.可焊鋼筋.棒材、卷材和開卷產品.規范 |
|
| BS 4462-1969 |
測量儀器和過程控制設備銷售技術資料的制訂指南 |
(Guide for the preparation of technical sales literature for measuring instruments and process control equipment) |
| BS 4463-1969 |
一般工程用卷曲墊圈規范.米制系列 |
(Specification for crinkle washers for general engineering purposes - Metric series) |
| BS 4464-1969 |
一般工程和汽車用彈簧墊圈規范.米制系列 |
(Specification for spring washers for general engineering and automobile purposes - Metric series) |
| BS 4465-1990 |
客貨兩用電動提升機的設計和結構規范 |
(Specification for design and construction of electric hoists for both passengers and materials) |
| BS 4467-1991 |
為老年人設計用尺寸指南 |
(Guide to dimensions in designing for elderly people) |
| BS 4470-1996 |
異丁烯-異戊二烯生橡膠(IIR)硫化特性的估算方法 |
(Method for evaluation of vulcanization characteristics of isobutene-isoprene rubber (IIR)) |
| BS 4475-2000 |
純礦物潤滑油規范 |
(Specification for straight mineral lubricating oils) |
| BS 4478-1969 |
彩色電視差轉機用電子管相互調制分量的測量方法 |
(Methods of measurement of intermodulation products in electronic tubes or valves intended for use in colour television transposers) |
| BS 4479-1-1990 |
層覆物品的設計.一般推薦方法 |
(Design of articles that are to be coated - General recommendations) |
| BS 4479-2-1990 |
層覆物品的設計.電鍍和自動催化覆層的推薦方法 |
(Design of articles that are to be coated - Recommendations for electroplated and autocatalytic coatings) |
| BS 4479-3-1990 |
層覆物品的設計.轉化膜的推薦方法 |
(Design of articles that are to be coated - Recommendations for conversion coatings) |
| BS 4479-4-1990 |
層覆物品的設計.第4部分:油漆和清漆覆層的推薦方法 |
(Design of articles that are to be coated - Recommendations for paint coatings and varnish coatings) |
| BS 4479-5-1990 |
層覆物品的設計.陽極氧化覆層的推薦方法 |
(Design of articles that are to be coated - Recommendations for anodic oxidation coatings) |
| BS 4479-7-1990 |
層覆物品的設計.熱噴覆層的推薦方法 |
(Design of articles that are to be coated - Recommendations for thermally sprayed coatings) |
| BS 4479-8-1990 |
層覆物品的設計.搪瓷覆層的推薦方法 |
(Design of articles that are to be coated - Recommendations for vitreous enamel coatings) |
| BS 4479-9-1990 |
層覆物品的設計.低壓和真空淀積覆層的推薦方法 |
(Design of articles that are to be coated - Recommendations for low pressure and vacuum deposited coatings) |
| BS 448-1-1981 |
電子管尺寸.第1部分:ＩＥＣ尺寸 |
(Dimensions of electronic tubes and valves - IEC dimensions) |
| BS 448-2-1981 |
電子管尺寸.第2部分:英國電子管尺寸規范 |
(Dimensions of electronic tubes and valves - Specification for dimensions of United Kingdom electronic tubes) |
| BS 4480-1-1992 |
滑動軸承.米制系列.第1部分:燒結軸襯的尺寸和公差 |
(Plain bearings: metric series - Sintered bushes - Dimensions and tolerances) |
| BS 4480-2-1974 |
滑動軸承規范.米制系列.第2部分:整體塑料軸套 |
(Specification for plain bearings: metric series - Solid plastics bushes) |
| BS 4480-3-1993 |
滑動軸承.米制系列.第3部分:銅合金套管 |
(Plain bearings: metric series - Copper alloy bushes) |
| BS 4480-4-1979 |
滑動軸承規范.米制系列.第4部分:卷制軸套尺寸,公差及檢驗方法 |
(Specification for plain bearings: metric series - Dimensions, tolerances and methods of checking wrapped bushes) |
| BS 4480-5-1979 |
滑動軸承.米制系列.薄壁半軸承的尺寸.公差及檢驗方法 |
(Plain bearings: metric series - Dimensions, tolerances and methods of checking thin-walled half bearings) |
| BS 4480-6-1984 |
滑動軸承規范.米制系列.第6部分:帶材制環形止推墊圈的尺寸和公差規范 |
(Plain bearings: metric series - Specification for dimensions and tolerances of ring type thrust washers made from strip) |
| BS 4480-7-1984 |
滑動軸承規范.米制系列.第7部分:壓制雙金屬半止推墊圈的尺寸和公差規范 |
(Plain bearings: metric series - Specification for dimensions and tolerances of pressed bimetallic half thrust washers) |
| BS 4480-8-1984 |
滑動軸承規范.米制系列.第8部分:薄壁法蘭聯接半軸承的尺寸.公差及檢驗方法 |
(Plain bearings: metric series - Specification for dimensions, tolerances and methods of checking of thin-walled flanged half bearings) |
| BS 4480-9-1995 |
滑動軸承:測量系列.外襯套的外部直徑測量 |
(Plain bearings: metric series - Checking the outside diameter of wrapped bushes) |
| BS 4481-2-1983 |
粘合研磨產品.第2部分:砂輪和砂片的尺寸規范 |
(Bonded abrasive products - Specification for dimensions of grinding wheels and segments) |
| BS 4482-1985 |
混凝土配筋用冷軋鋼絲規范 |
(Specification for cold reduced steel wire for the reinforcement of concrete) |
| BS 4482-2005 |
混凝土配筋用鋼絲.規范 |
|
| BS 4483-1998 |
混凝土配筋用鋼絲網 |
(Steel fabric for the reinforcement of concrete) |
| BS 4483-2005 |
混凝土配筋用鋼筋網.規范 |
|
| BS 4484-1-1969 |
施工用測量儀器規范.線性測量用儀器的米制分度和校正 |
(Specification for measuring instruments for constructional works - Metric graduation and figuring of instruments for linear measurement) |
| BS 4485-2-1988 |
水冷卻塔規范.第2部分:性能試驗方法 |
(Water cooling towers - Methods for performance testing) |
| BS 4485-3-1988 |
水冷卻塔規范.第3部分:熱設計和功能設計實用規程 |
(Water cooling towers - Code of practice for thermal and functional design) |
| BS 4485-4-1996 |
水冷卻塔規范.第4部分:冷卻塔的結構設計使用規程 |
(Water cooling towers - Code of practice for structural design and construction) |
| BS 4486-1980 |
混凝土預加應力用熱軋和熱軋并處理的高抗拉強度的合金鋼筋規范 |
(Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete) |
| BS 449-2-1969 |
結構鋼在建筑上的應用規范.第2部分:米制件 |
(Specification for the use of structural steel in building - Metric units) |
| BS 4493-1969 |
電鍍用銅鹽規范 |
(Specification for copper salts for electroplating) |
| BS 4495-1969 |
陶瓷和金屬陶瓷覆層的熔噴法推薦標準 |
(Recommendations for the flame spraying of ceramic and cermet coatings) |
| BS 4496-1984 |
紙漿的酸不溶灰分測定方法 |
(Method for determination of acid-insoluble ash of pulp) |
| BS 4497-1969 |
紙中氮處理劑的檢測和估算推薦標準 |
(Recommendations for the detection and estimation of nitrogenous treating agents in paper) |
| BS 4498-1982 |
紙漿卡帕值(脫除木質素度)的測定方法 |
(Method for determination of the Kappa number of pulp (degree of delignification)) |
| BS 4499-1984 |
紙漿堿溶解度的測定方法 |
(Method for determination of alkali solubility of pulp) |
| BS 450-1958 |
機器螺釘與機器螺母(B.S.W和 B.S.F螺紋)規范 |
(Specification for machine screws and machine screw nuts (B.S.W. & B.S.F. threads)) |
| BS 4500-4-1985 |
ISO 極限與配合.第4部分:錐度C=1:3至1:500、長度6mm至630mm和直徑達500mm的圓錐(錐度)配合制規范 |
(ISO limits and fits - Specification for system of cone (taper) fits for cones from C=1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm) |
| BS 4500-5-1988 |
ISO 極限與配合.第5部分:C=1:3至1:500、長度6mm至630mm的圓錐形工件用錐度公差制規范 |
(ISO limits and fits - Specification for system of cone tolerances for conical workpieces from C = 1:3 to 1:500 and lengths from 6 mm to 630 mm) |
| BS 4500A-1970 |
ISO極限與配合.數據表:選用的ISO配合－基孔制 |
(ISO limits and fits - Data sheet: selected ISO fits - hole basis) |
| BS 4500B-1970 |
ISO極限與配合.數據表:選用的ISO配合－基軸制 |
(ISO limits and fits - Data sheet: selected ISO fits - shaft basis) |
| BS 4504-3.3-1989 |
管、閥門及配件用圓法蘭(標定額定壓力標志數的).鋼、鑄鐵和銅合金法蘭.第3節:銅合金和組合法蘭規范 |
(Circular flanges for pipes, valves and fittings (PN designated) - Specification for copper alloy and composite flanges) |
| BS 4505-1-1981 |
數字數據傳輸.第1部分:基本型控制規程規范 |
(Digital data transmission - Specification for basic mode control procedures) |
| BS 4505-2-1990 |
數字數據傳輸.第2部分:起/止傳輸和同步傳輸用字符結構 |
(Digital data transmission - Character structure for start/stop and synchronous transmission) |
| BS 4505-3-1981 |
數字數據傳輸.第3部分:縱向奇偶檢測誤差在信息性信息中的使用方法 |
(Digital data transmission - Method for use of longitudinal parity to detect errors in information messages) |
| BS 4506-1970 |
軸端規范 |
(Specification for shaft ends) |
| BS 4507-1969 |
潤滑脂槍套筒(組合式)規范 |
(Specification for grease gun cartridges (composite type)) |
| BS 4508-1-1986 |
絕熱地下管道.第1部分:有氣隙的外加鋼套管系統規范 |
(Thermally insulated underground pipelines - Specification for steel cased systems with air gap) |
| BS 4508-4-1977 |
絕熱地下管道.無氣隙的外加套管系統的特殊試驗及檢驗要求 |
(Thermally insulated underground pipelines - Specific testing and inspection requirements for cased systems without air gap) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com