標準號 |
中文名稱 |
英文名稱 |
| BS EN 1365-5-2004 |
承重構件的防火試驗.陽臺和走道 |
|
| BS EN 1365-6-2004 |
承重構件的防火試驗.樓梯 |
|
| BS EN 13650-2001 |
土壤改良劑和生長劑.可溶性王水素的提取 |
(Soil improvers and growing media - Extraction of aqua regia soluble elements) |
| BS EN 13651-2001 |
土壤改良劑和生長劑.可溶性氯化鈣/DTPA(CAT)素的提取 |
(Soil improvers and growing media - Extraction of calcium chloride/DTPA (CAT) soluble elements) |
| BS EN 13652-2001 |
土壤改良劑和生長劑.水溶性養分和素的提取 |
(Soil improvers and growing media - Extraction of water soluble nutrients and elements) |
| BS EN 13654-1-2001 |
土壤改良劑和生長劑.氮的測定.改良的基爾達斯法 |
(Soil improvers and growing media - Determination of nitrogen - Modified Kjeldahl method) |
| BS EN 13654-2-2001 |
土壤改良劑和生長劑.氮的測定.DUMAS法 |
(Soil improvers and growing media - Determination of nitrogen - Dumas method) |
| BS EN 13655-2002 |
塑料.農業和園藝用熱塑性塑料薄膜覆蓋物 |
(Plastics - Mulching thermoplastic films for use in agriculture and horticulture) |
| BS EN 13656-2002 |
廢棄物特征.化學素序列測定用氟氫(HF)、含氮物物質(HNODOWN3)和氯化氫的(HCl)酸混合物的微波輔助發酵法 |
(Characterization of waste - Microwave assisted digestion with hydrofluoric (HF), nitric (HNODOWN3), and hydrochloric (HCl) acid mixture for subsequent determination of elements) |
| BS EN 13657-2002 |
廢棄物特征.化學素的王水溶解部分系列測定用發酵法 |
(Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements) |
| BS EN 13658-2-2005 |
金屬板條和串珠.定義、要求和試驗方法.外部粉刷 |
|
| BS EN 13659-2004 |
遮板.包括安全的性能要求 |
|
| BS EN 1366-1-1999 |
服務設施的防火試驗.管廊 |
Fire resistance tests for service installations - Fire resistance tests for service installations - Ducts |
| BS EN 1366-2-1999 |
服務設施的防火試驗.火爐調節閘 |
(Fire resistance tests for service installations - Fire dampers) |
| BS EN 1366-3-2004 |
服務設施的防火試驗.滲透密封件 |
|
| BS EN 1366-5-2003 |
服務設施的防火試驗.輔助通道和通風井 |
(Fire resistance tests for service installations - Service ducts and shafts) |
| BS EN 1366-6-2004 |
輔助設施的防火試驗.架高通道和空心地板 |
|
| BS EN 1366-7-2004 |
服務設施的防火試驗.傳送系統及其隔板 |
|
| BS EN 1366-8-2004 |
輔助設施的防火檢驗.排煙管 |
|
| BS EN 1367-1-2000 |
集料的風化特性和熱特性的試驗.凍結和熔化抗性的測定 |
(Tests for thermal and weathering properties of aggregates - Determination of resistance to freezing and thawing) |
| BS EN 1367-2-1998 |
集料的風化特性及熱試驗.硫酸鎂試驗 |
(Tests for thermal and weathering properties of aggregates - Magnesium sulfate test) |
| BS EN 1367-3-2001 |
集料的風化特性和熱特性的試驗.玄武巖的煮沸試驗 |
(Tests for thermal and weathering properties of aggregates - Boiling test for Sonnenbrand basalt) |
| BS EN 1367-4-1998 |
集料的風化特性及熱試驗.干縮量測定 |
(Tests for thermal and weathering properties of aggregates - Determination of drying shrinkage) |
| BS EN 1367-5-2002 |
集料的風化特性和熱特性試驗.測定耐熱震動性 |
(Tests for thermal and weathering properties of aggregates - Determination of resistance to thermal shock) |
| BS EN 13672-2004 |
運動場表面.非填裝人工草皮的抗摩擦測定 |
|
| BS EN 13672-2004 |
運動場表面.非填裝人工草皮的抗摩擦測定 |
|
| BS EN 13673-1-2003 |
氣體和蒸氣的最大爆炸壓力和最大壓升的測定.最大爆炸壓力的測定 |
(Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Determination of the maximum explosion pressure) |
| BS EN 13674-1-2003 |
鐵路設施.軌道.鋼軌.46kg/m及以上(列車)用丁字形鐵軌 |
(Railway applications - Track - Rail - Vignole railway rails 46 kg/m and above) |
| BS EN 13675-2004 |
機械安全.管道成型和軋制機及其精整作業線設備的安全要求 |
|
| BS EN 13676-2001 |
與食品接觸的聚合物涂層的紙和紙板.針孔的檢測 |
(Polymer coated paper and board intended for food contact - Detection of pinholes) |
| BS EN 13677-1-2003 |
增強的熱塑性模塑復合材料.GMT規范.名稱與符號 |
(Reinforced thermoplastic moulding compounds - Specification for GMT - Designation) |
| BS EN 13677-2-2003 |
增強的熱塑性模塑復合材料.GMT規范.試驗方法和一般要求 |
(Reinforced thermoplastic moulding compounds - Specification for GMT - Methods of test and general requirements) |
| BS EN 13677-3-2003 |
增強的熱塑性模塑復合材料.GMT規范.特定要求 |
(Reinforced thermoplastic moulding compounds - Specification for GMT - Specific requirements) |
| BS EN 13683-2003 |
園藝機具.整體驅動的切碎機.安全 |
(Garden equipment - Integrally powered shredders/chippers - Safety) |
| BS EN 13684-2004 |
園藝設備.可以在側面步行操縱的草坪打松機和翻松機.安全 |
|
| BS EN 13687-1-2002 |
混凝土結構的防護和維修的產品和系統.試驗方法.測定熱適應性.鹽水浸濕解冰熱循環法 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Freeze-thaw cycling with de-icing salt immersion) |
| BS EN 13687-2-2002 |
混凝土結構的防護和維修的產品和系統.試驗方法.測定熱適應性.雷暴雨循環法(熱沖擊) |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Thunder-shower cycling (thermal shock)) |
| BS EN 13687-3-2002 |
混凝土結構的防護和維修的產品和系統.試驗方法.測定熱適應性.無鹽水浸濕解冰循環法 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Thermal cycling without de-icing salt impact) |
| BS EN 13687-4-2002 |
混凝土結構的防護和維修的產品和系統.試驗方法.測定熱適應性.干熱循環法 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Dry thermal cycling) |
| BS EN 13687-5-2002 |
混凝土結構的防護和維修的產品和系統.試驗方法.測定熱適應性.耐溫度沖擊性 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Resistance to temperature shock) |
| BS EN 13689-2003 |
改建用塑料管道系統的分類和設計指南 |
(Guidance on the classification and design of plastics piping systems used for renovation) |
| BS EN 1369-1997 |
鑄造.磁粉檢測 |
(Founding - Magnetic particle inspection) |
| BS EN 13693-2004 |
預澆鑄混凝土制品.特殊屋頂部件 |
|
| BS EN 13697-2001 |
化學消毒劑和防腐變劑.食品、工業、家庭和研究所范圍內使用的化學消毒劑的殺菌和/或殺真菌性能評定用定量無 |
() |
| BS EN 13698-1-2003 |
托盤生產規范.800 mm x 1200 mm木制平托盤的制作規范 |
(Pallet production specification - Construction specification for 800 mm x 1200 mm flat wooden pallets) |
| BS EN 13698-2-2003 |
托盤生產規范.1000 mm x 1200 mm木制平托盤的制作規范 |
(Pallet production specification - Construction specification for 1000 mm x 1200 mm flat wooden pallets) |
| BS EN 137-1993 |
呼吸保護裝置.自備開路壓縮空氣呼吸器 |
(Specification for respiratory protective devices: self-contained open-circuit compressed air breathing apparatus) |
| BS EN 1370-1997 |
鑄造.用可視比較儀檢查表面粗糙度 |
(Founding - Surface roughness inspection by visual tactile comparators) |
| BS EN 137000-1996 |
電器件的質量保證體系.總規范:電動機用于因式交流電容器和非定式電容器 |
(Harmonized system of quality assessment for electronic components - Generic specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors) |
| BS EN 13701-2001 |
航空系統.術語集 |
(Space systems - Glossary of terms) |
| BS EN 13702-1-2004 |
石油及其制品的試驗方法.BS 2000-513:瀝青和瀝青粘合劑.改性瀝青動力粘性的測定.錐板法 |
|
| BS EN 13702-2-2004 |
石油及其制品的試驗方法.BS 2000-513:瀝青和瀝青粘合劑.改性瀝青動力粘性的測定.同軸圓桶法 |
|
| BS EN 13703-2004 |
石油及其制品的試驗方法.BS 2000-515:瀝青和瀝青粘合劑.變形能的測定 |
|
| BS EN 13703-2004 |
石油及其制品的試驗方法.BS 2000-515:瀝青和瀝青粘合劑.變形能的測定 |
|
| BS EN 13704-2002 |
化學消毒劑.食品、工業、家庭和研究單位用化學消毒劑的殺孢子活性評定用定量懸浮試驗.試驗方法和要求(階段2 |
(Chemical disinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and r) |
| BS EN 13705-2004 |
熱塑焊接.熱氣焊機械和設備(包括擠焊) |
|
| BS EN 13706-1-2002 |
增強塑料復合材料.擠拉制型材規范.命名 |
(Reinforced plastics composites - Specifications for pultruded profiles - Designation) |
| BS EN 13706-2-2002 |
增強塑料復合物.擠拉成型規范.一般要求和試驗方法 |
(Reinforced plastics composites - Specifications for pultruded profiles - Method of test and general requirements) |
| BS EN 13706-3-2002 |
增強塑料復合物.擠拉成型規范.特殊要求 |
(Reinforced plastics composites - Specifications for pultruded profiles - Specific requirements) |
| BS EN 13708-2002 |
食品.用電子自旋共振光譜法檢驗經輻照的含晶體糖的食品 |
(Foodstuffs - Detection of irradiated food containing crystalline sugar by ESR spectroscopy) |
| BS EN 13709-2003 |
工業用閥.鋼制球閥、球狀截止閥和止回閥 |
(Industrial valves - Steel globe and globe stop and check valves) |
| BS EN 1371-1-1997 |
鑄造.液體滲透檢查.砂型,重量壓模,和低壓壓模鑄造 |
(Founding - Liquid penetrant inspection - Sand, gravity die and low pressure die castings) |
| BS EN 1371-2-1998 |
鑄造.液體滲透檢查.熔模鑄造 |
(Founding - Liquid penetrant inspection - Investment castings) |
| BS EN 137100-1996 |
電子件質量認證協調體系.分規范.固定式交流鋁電解質電動機起動電容器.合格認可 |
(Harmonized system of quality assessment for electronic components - Sectional specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Q) |
| BS EN 137101-1996 |
空白詳細規范.固定式交流鋁電解質發電動機起動電容器.合格認可 |
(Harmonized system of quality assessment for electronic components - Blank detail specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications) |
| BS EN 13711-2002 |
內路導航船.船運行用鉸盤.安全要求 |
(Inland navigation vessels - Winches for ship operation - Safety requirements) |
| BS EN 13716-2002 |
表面 活性劑.基本氮總量的測定.電勢滴定法 |
(Surface active agents - Determination of total base nitrogen - Potentiometric titration) |
| BS EN 13717-2002 |
表面活性劑.伯、仲、叔胺基氮的測定.電勢滴定法 |
(Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration) |
| BS EN 13718-1-2002 |
航空、水域和困難地區中救護車.連續救護患者用醫療器械接口要求 |
(Air, water and difficult terrain ambulances - Medical devices interface requirements for the continuity of patient care) |
| BS EN 13718-2-2002 |
航空、水域和困難地區中救護車.連續救護患者的操作和技術要求 |
(Air, water and difficult terrain ambulances - Operational and technical requirements for the continuity of patient care) |
| BS EN 13719-2002 |
土工布和土工布相關產品.測定與土工合成格柵接觸的土工布的長期防護效率 |
(Geotextiles and geotextile-related products - Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers) |
| BS EN 1372-2000 |
膠粘劑.地板和墻壁覆蓋物膠粘劑的試驗方法.剝離試驗 |
(Adhesives - Test method for adhesives for floor and wall coverings - Peel test) |
| BS EN 13720-2002 |
可運輸氣瓶.乙炔蓄電池的充電條件 |
(Transportable gas cylinders - Filling conditions for acetylene battery vehicles) |
| BS EN 13721-2004 |
家具.表面反射性的評定 |
|
| BS EN 13722-2004 |
家具.表面光澤度的評定 |
|
| BS EN 13723-2002 |
汽油及其產物的試驗方法.汽油產品.用波長色散X-射線熒光光譜法(XRF)測定輸氣管中的第鉛含量 |
(Methods of test for petroleum and its products - Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF)) |
| BS EN 13724-2002 |
郵政業務.私人信箱和信箱投信口金屬板縫隙的要求和試驗方法 |
(Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods) |
| BS EN 13725-2003 |
空氣質量.用動態氣味測定法測定氣味濃度 |
(Air quality - Determination of odour concentration by dynamic olfactometry) |
| BS EN 13726-1-2002 |
主要傷口敷料試驗方法.吸收度 |
(Test methods for primary wound dressings - Aspects of absorbency) |
| BS EN 13726-2-2002 |
主要傷口敷料試驗方法.可滲透薄膜敷料濕氣蒸發傳輸率 |
(Test methods for primary wound dressings - Moisture vapour transmission rate of permeable film dressings) |
| BS EN 13726-3-2003 |
主要傷口敷料試驗方法.防水性 |
(Test methods for primary wound dressings - Waterproofness) |
| BS EN 13726-4-2003 |
主要傷口敷料試驗方法.一致性 |
(Test methods for primary wound dressings - Conformability) |
| BS EN 13726-6-2003 |
主要傷口敷料試驗方法.氣味控制 |
(Test methods for primary wound dressings - Odour control) |
| BS EN 1373-2000 |
膠粘劑.地板和墻壁覆蓋物膠粘劑的試驗方法.剪切試驗 |
(Adhesives - Test method for adhesives for floor and wall coverings - Shear test) |
| BS EN 13732-2003 |
食品加工機械.農場散裝奶冷卻器.使用、安全和衛生用結構、性能和適用性要求 |
(Food processing machinery - Bulk milk coolers on farms - Requirements for construction, performance, suitability for use, safety and hygiene) |
| BS EN 13733-2002 |
混凝土結構的防護和維修用產品和系統.試驗方法.結構粘接劑耐久性的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of the durability of structural bonding agents) |
| BS EN 13736-2003 |
機床安全.氣動壓力機 |
(Safety of machine tools - Pneumatic presses) |
| BS EN 13739-1-2003 |
農用機械.固體肥料撒播機和全幅寬撒布器.環境保護.要求 |
(Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Requirements) |
| BS EN 13739-2-2003 |
農用機械.固體肥料撒播機和全幅寬撒布器.環保.試驗方法 |
(Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Test methods) |
| BS EN 1374-2000 |
農業機械.圓筒倉用筒倉固定卸載機.安全 |
(Agricultural machinery - Silos stationary unloaders for round silos - Safety) |
| BS EN 13740-1-2003 |
農用機械.固體肥料分行施肥機.環保.要求 |
(Agricultural machinery - Solid fertilizer line-distributors - Environmental protection - Requirements) |
| BS EN 13740-2-2003 |
農用機械.固體肥料分行施肥機.環保.試驗方法 |
(Agricultural machinery - Solid fertilizer line-distributors - Environmental protection - Test methods) |
| BS EN 13742-1-2004 |
灌溉技術.固定式噴灑系統.選擇、設計、規劃和安裝 |
|
| BS EN 13742-2-2004 |
灌溉技術.固定式噴灌系統.試驗方法 |
|
| BS EN 13743-2002 |
涂覆磨料的安全要求 |
(Safety requirements for coated abrasives) |
| BS EN 13744-2004 |
運動場表面.熱水浸漬所致的加速老化過程 |
|
| BS EN 13745-2004 |
運動場表面.鏡面反射系數的測定 |
|
| BS EN 13746-2004 |
運動場表面.由于水、霜凍和熱條件變化引起的尺寸變化的測定 |
|
| BS EN 13748-1-2004 |
水磨石磚.內部用水磨石磚 |
|
| BS EN 13748-2-2004 |
水磨石磚.外部使用的水磨石磚 |
|
| BS EN 1375-2002 |
識別卡系統.橫斷集成電路卡附加格式.ID-000卡尺寸和物理特性 |
(Identification card system - Intersector integrated circuit(s) card additional formats - ID-000 card size and physical characteristics) |
| BS EN 13750-2002 |
暖爐、炊具或爐架頂部用家用水壺.要求和試驗方法 |
(Domestic water kettles for use on top of stove, cooker or hob - Requirements and test methods) |
| BS EN 13751-2002 |
食品.利用光刺激發光法檢測輻照食品 |
(Foodstuffs - Detection of irradiated food using photostimulated luminescence) |
| BS EN 13752-2003 |
飲用水處理用產品.二氧化錳 |
(Products used for treatment of water intended for human consumption - Manganese dioxide) |
| BS EN 13753-2003 |
生活用水的水處理用品.粒狀活性鋁氧土 |
(Products used for treatment of water intended for human consumption - Granular activated alumina) |
| BS EN 13754-2003 |
飲用水處理用產品.膨潤土 |
(Products used for treatment of water intended for human consumption - Bentonite) |
| BS EN 13755-2002 |
天然石料.試驗方法.大氣壓下吸水性的測定 |
(Natural stone - Test methods - Determination of water absorption at atmospheric pressure) |
| BS EN 13756-2002 |
木地板.術語 |
(Wood flooring - Terminology) |
| BS EN 13757-1-2003 |
儀表及其遠程讀數的通信系統.數據交換 |
(Communication system for meters and remote reading of meters - Data exchange) |
| BS EN 13757-2-2004 |
儀表和儀表的遠程讀數用通信系統.物理層和鏈路層 |
|
| BS EN 13757-3-2004 |
儀表和儀表的遠程讀數用通信系統.專用應用層 |
|
| BS EN 13758-1-2002 |
紡織品.太陽紫外線防護特性.外衣用織物的試驗方法 |
(Textiles - Solar UV protective properties - Method of test for apparel fabrics) |
| BS EN 13758-2-2003 |
紡織品.太陽紫外線防護特性.服裝的分類和標記 |
(Textiles - Solar UV protective properties - Classification and marking of apparel) |
| BS EN 1376-1997 |
食品.塊狀甜品中糖精的測定.分光光度測量法 |
(Foodstuffs - Determination of saccharin in table top sweetener preparations - Spectrometric method) |
| BS EN 13760-2003 |
輕型和重型車輛用機動車液化石油氣填充系統.噴油嘴試驗要求和尺寸 |
(Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions) |
| BS EN 13761-2002 |
辦公家具.客戶座椅 |
(Office furniture - Visitors chairs) |
| BS EN 13763-1-2004 |
民用爆炸物.雷管和傳爆管.要求 |
|
| BS EN 13763-11-2003 |
民用爆炸物.雷管和傳爆管.雷管和傳爆管耐跌落損壞的測定 |
(Explosives for civil uses - Detonators and relays - Determination of resistance to damage by dropping of detonators and relays) |
| BS EN 13763-12-2003 |
民用爆炸物.雷管和傳爆管.耐靜水壓力的測定 |
(Explosives for civil uses - Detonators and relays - Determination of resistance to hydrostatic pressure) |
| BS EN 13763-13-2004 |
民用爆炸物.雷管和傳爆管.電雷管耐靜電放電性的測定 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com