標準號 |
中文名稱 |
英文名稱 |
| BS EN 794-1-1997 |
肺呼吸器.臨�？醋o(hù)呼吸器的特殊要求 |
(Lung ventilators - Particular requirements for critical care ventilators) |
| BS EN 794-2-1997 |
肺呼吸器.家庭看護用呼吸器的特殊要求 |
(Lung ventilators - Particular requirements for home care use) |
| BS EN 794-3-1999 |
肺呼吸器.緊急情況和移動通風器的特殊要求 |
(Lung ventilators - Particular requirements for emergency and transport ventilators) |
| BS EN 795-1997 |
防止從高處跌落.拋錨設備.要求和試驗 |
(Protection against falls from a height - Anchor devices - Requirements and testing) |
| BS EN 797-1996 |
條形碼.符號規范“EAN/UPC“ |
(Bar coding - Symbology specifications - ’EAN/UPC’) |
| BS EN 798-1996 |
條形碼.符號規范.’Codabar’ |
(Bar coding - Symbology specifications - ’Codabar’) |
| BS EN 80-2001 |
墻掛式便器.連接尺寸 |
(Wall-hung urinals - Connecting dimensions) |
| BS EN 802-1995 |
塑料管和管道系統.壓力管道系統的噴射鑄造熱塑性部件.最大擠壓變形試驗方法 |
(Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing) |
| BS EN 803-1995 |
塑料管道系統.壓力管道的彈性密封環狀連接件用注模熱塑性配件.耐無端推力的快速內壓的試驗方法 |
(Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end) |
| BS EN 804-1995 |
塑料管道系統.壓力管道溶焊接頭的噴射鑄造插接部件.瞬時內部液壓阻力的試驗方法 |
(Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure) |
| BS EN 80416-1-2002 |
設備上使用的圖形符號的基本原則.符號原型的創建 |
(Basic principles for graphical symbols for use on equipment - Creation of symbol originals) |
| BS EN 80416-2-2001 |
設備上用的圖形符號的基本原則.箭頭的使用和格式 |
(Basic principles for graphical symbols for use on equipment - Form and use of arrows) |
| BS EN 80416-3-2003 |
設備上使用的圖形符號的基本原則.圖形符號使用導則 |
(Basic principles for graphical symbols for use on equipment - Guidelines for the application of graphical symbols) |
| BS EN 805-2000 |
供水.建筑物外部的系統和構件的要求 |
(Water supply - Requirements for systems and components outside buildings) |
| BS EN 806-1-2000 |
建筑物內部飲用水供應設備規范.總則 |
(Specifications for installations inside buildings conveying water for human consumption - General) |
| BS EN 809-1998 |
液體用泵和泵件.一般安全要求 |
(Pumps and pump units for liquids - Common safety requirements) |
| BS EN 81-1-1998 |
電梯的建造和安裝的安全規則.電梯 |
(Safety rules for the construction and installation of lifts - Electric lifts) |
| BS EN 81-2-1998 |
電梯的建造和安裝的安全規則.液壓梯 |
(Safety rules for the construction and installation of lifts - Hydraulic lifts) |
| BS EN 81-28-2003 |
電梯的建造和安裝的安全規則.客用梯和貨用梯上的遙控警報器 |
(Safety rules for the construction and installation of lifts - Remote alarm on passenger and goods passenger lifts) |
| BS EN 81-3-2001 |
電梯的建造和安裝的安全規則.電動和液壓自動回轉送貨機 |
(Safety rules for the construction and installation of lifts - Electric and hydraulic service lifts) |
| BS EN 81-58-2003 |
升降機建造和安裝的安全規則.檢驗和試驗.電梯入門防火試驗 |
(Safety rules for the construction and installation of lifts - Examination and tests - Landing doors fire resistance test) |
| BS EN 81-70-2003 |
電梯的建造和安裝的安全規則.載客及客貨兩用電梯的特殊應用.電梯對包括殘疾人在內的所有人員的可達性 |
(Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Accessibility to lifts for persons including persons with disability) |
| BS EN 81-71-2005 |
電梯建造和安裝的安全規則.客用和客貨兩用電梯的特殊裝置.防美觀被破壞的電梯 |
|
| BS EN 81-72-2003 |
升降機建造和安裝的安全規則.載人和載貨升降機用特殊裝置.消防用升降機 |
(Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Firefighters lifts) |
| BS EN 81-80-2003 |
升降機建造和安裝的安全規則.提高現有客運升降機和客貨升降機的安全性用規則 |
(Safety rules for the construction and installation of lifts - Rules for the improvement of safety of existing passenger and goods passenger lifts) |
| BS EN 810-1997 |
帶電動壓縮機的減濕器.考核試驗、標記和操作要求及技術數據表 |
(Dehumidifiers with electrically driven compressors - Rating tests, marking, operational requirements and technical data sheet) |
| BS EN 811-1997 |
機械安全.防止被低處部件碰撞的危險區安全距離 |
(Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs) |
| BS EN 812-1998 |
工業防護帽 |
(Industrial bump caps) |
| BS EN 813-1997 |
防止墜落的個人保護裝置.坐騎用帶狀裝置 |
(Personal protective equipment for prevention of falls from a height - Sit harnesses) |
| BS EN 814-1-1997 |
帶有電驅動壓縮機的熱泵和空調器.制冷模型.條款, 定義和名稱 |
(Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Terms, definitions and designations) |
| BS EN 814-2-1997 |
帶有電驅動壓縮機的熱泵和空調器.制冷模型.標記的試驗和要求 |
(Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Testing and requirements for marking) |
| BS EN 814-3-1997 |
具有電驅動壓縮機的空調和熱泵.制冷模式.要求 |
(Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Requirements) |
| BS EN 815-1997 |
巖石用未掩蔽的隧道掘進鉆探設備和無桿鉆井機的安全 |
(Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock) |
| BS EN 816-1997 |
衛生間水龍頭旋塞裝置.自動切斷閥 |
(Sanitary tapware - Automatic shut-off valves PN 10) |
| BS EN 817-1998 |
衛生旋塞.機械混合器(PN10).常規機械規范 |
(Sanitary tapware - Mechanical mixers (PN 10) - General technical specifications) |
| BS EN 81714-2-1999 |
產品技術文件用圖形符號的設計.計算機適用的圖形符號(包括參考目錄圖形符號及其交換要求)的規范 |
(Design of graphical symbols for use in the technical documentation of products - Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, a) |
| BS EN 81714-3-2001 |
產品技術文件編制用圖形符號的設計.連接節、網絡及其編碼的分類 |
(Design of graphical symbols for use in the technical documentation of products - Classification of connect nodes, networks and their encoding) |
| BS EN 818-1-1996 |
提升目的用的短扁節鏈條.安全.驗收的一般條件 |
(Short link chain for lifting purposes - Safety - General conditions of acceptance) |
| BS EN 818-2-1997 |
升降用短節鏈.安全.第2部分:吊鏈用中等公差鏈條.8號 |
(Short link chain for lifting purposes - Safety - Medium tolerance chain for chain slings - Grade 8) |
| BS EN 818-3-1999 |
升降用的短節鏈條.安全.吊鏈用中等公差鏈條.4級 |
(Short link chain for lifting purposes - Safety - Medium tolerance chain for chain slings - Grade 4) |
| BS EN 818-4-1997 |
起重用短扁節鏈條.安全性.第4部分:8質量等級止檔鏈 |
(Short link chain for lifting purposes - Safety - Chain slings - Grade 8) |
| BS EN 818-5-1999 |
升降用的短節鏈條.安全.鏈?zhǔn)降蹑i鏈.4級 |
(Short link chain for lifting purposes - Safety - Chain slings - Grade 4) |
| BS EN 818-6-2000 |
提升用短扁節鏈條.安全.鏈?zhǔn)降跛?生產商提供的使用和維護的信息規范 |
(Short link chain for lifting purposes - Safety - Chain slings - Specification for information for use and maintenance to be provided by the manufacturer) |
| BS EN 818-7-2002 |
升降用的短節鏈條.安全.鏈?zhǔn)降跛?精密公差吊鏈、等級T(類型T、DAT和 DT) |
(Short link chain for lifting purposes - Safety - Fine tolerance hoist chain, Grade T (Types T, DAT and DT)) |
| BS EN 820-1-2003 |
高級工業陶瓷.整體陶瓷的試驗方法.熱機械特性.高溫下?lián)锨鷱?qiáng)度的測定 |
(Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Determination of flexural strength at elevated temperatures) |
| BS EN 820-2-2003 |
高級工業陶瓷.整體陶瓷的試驗方法.熱機械特性.自重變形的測定 |
(Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Determination of self-loaded deformation) |
| BS EN 820-3-2004 |
高級工業陶瓷.單片陶瓷的試驗方法.熱機械性能.水淬火法測定耐熱沖擊 |
|
| BS EN 820-3-2004 |
高級工業陶瓷.單片陶瓷.熱機械性能.水淬火法測定耐熱沖擊 |
|
| BS EN 82045-1-2001 |
文件管理.原則和方法 |
(Document management - Principles and methods) |
| BS EN 82045-2-2005 |
文獻管理.數據素和信息參考模型 |
|
| BS EN 821-1-1995 |
高級工業陶瓷.單塊陶瓷.熱物理特性.熱膨脹率的測定 |
(Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Determination of thermal expansion) |
| BS EN 821-2-1997 |
高級工業陶瓷.單塊陶瓷.熱物理特性. 激光閃爍法(熱脈沖法)對熱擴散率的測定 |
(Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Determination of thermal diffusivity by the laser flash (or heat pulse) method) |
| BS EN 822-1995 |
建筑用熱絕緣制品.長度和寬度的測定 |
(Thermal insulating products for building applications - Determination of length and width) |
| BS EN 823-1995 |
建筑用隔熱產品.厚度的測定 |
(Thermal insulating products for building applications - Determination of thickness) |
| BS EN 824-1995 |
建筑用隔熱產品.垂直度的測定 |
(Thermal insulating products for building applications - Determination of squareness) |
| BS EN 825-1995 |
建筑用隔熱產品.平面度的測定 |
(Thermal insulating products for building applications - Determination of flatness) |
| BS EN 826-1996 |
建筑物用的熱絕緣產品.壓縮性測定 |
(Thermal insulating products for building applications - Determination of compression behaviour) |
| BS EN 827-1995 |
膠粘劑.常規固體含量和恒定質量固體含量的測定 |
(Adhesives - Determination of conventional solids content and constant mass solids content) |
| BS EN 828-1998 |
膠粘劑.濕潤度.通過對固體表面主要表面張力和接觸角度的測量測定 |
(Adhesives - Wettability - Determination by measurement of contact angle and critical surface tension of solid surface) |
| BS EN 829-1997 |
玻璃器內的診斷系統.醫學和生物標本的傳送包裝件.要求和試驗 |
(In vitro diagnostic systems - Transport packages for medical and biological specimens - Requirements, tests) |
| BS EN 834-1995 |
測定房間暖氣片損耗用的熱成本分配器.帶電能源的器具 |
Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply |
| BS EN 835-1995 |
測定房間暖氣片損耗用的熱成本分配器.以蒸發原理為基礎的不帶電能源的器具 |
(Heat cost allocators for the determination of the consumption of room heating radiators - Appliances without an electrical energy supply, based on the evaporation principle) |
| BS EN 836-1997 |
園藝機具.電動剪草機.安全 |
(Garden equipment - Powered lawnmowers - Safety) |
| BS EN 837-1-1998 |
壓力計.波登壓力計.規格,計量,要求和試驗 |
(Pressure gauges - Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing) |
| BS EN 837-2-1998 |
壓力計.壓力計的選擇,裝配和推薦 |
(Pressure gauges - Selection and installation recommendations for pressure gauges) |
| BS EN 837-3-1998 |
壓力計.薄膜和分離艙壓力計.尺寸、計量、要求和試驗 |
(Pressure gauges - Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing) |
| BS EN 838-1996 |
工作場所的空氣.測定氣體和水蒸汽用的擴散取樣器.要求和試驗方法 |
(Workplace atmospheres - Diffusive samplers for the determination of gases and vapours - Requirements and test methods) |
| BS EN 84-1997 |
木材防腐劑.先于生物試驗的處理木材的加速老化.泄漏過程 |
(Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure) |
| BS EN 840-1-1997 |
移動式廢料箱.梳形提升裝置用雙輪容積為80升至390升的裝料箱.尺寸和設計 |
(Mobile waste containers - Containers with two wheels with a capacity from 80 l to 390 l for comb lifting devices - Dimensions and design) |
| BS EN 840-1-2004 |
移動式廢品箱.梳形提升裝置用容積為400升及以下的兩輪廢品箱.尺寸和設計 |
|
| BS EN 840-2-1997 |
移動式廢料箱.吊耳形和/或梳形提升裝置用四輪容積為500升至1200升帶平蓋的裝料箱.尺寸和設計 |
Mobile waste containers - Containers with four wheels with a capacity from 500 l to 1200 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
| BS EN 840-2-2004 |
移動式廢品箱.耳軸式和/或梳形提升裝置用容積為1300升及以下的帶平蓋的4輪廢品箱.尺寸和設計 |
|
| BS EN 840-2-2004 |
移動式廢品箱.耳軸式和/或梳形提升裝置用容積為1300升及以下的帶平蓋的4輪廢品箱.尺寸和設計 |
|
| BS EN 840-3-1997 |
移動式廢料箱.吊耳形和/或梳形提升裝置用四輪容積為770升至1300升帶圓頂蓋的裝料箱.尺寸和設計 |
(Mobile waste containers - Containers with four wheels with a capacity from 770 l to 1300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design) |
| BS EN 840-3-2004 |
移動式廢品箱.耳軸式和/或梳形提升裝置用容積為1300升及以下的帶圓頂蓋的4輪廢品箱.尺寸和設計 |
|
| BS EN 840-3-2004 |
移動式廢品箱.耳軸式和/或梳形提升裝置用容積為1300升及以下的帶圓頂蓋的4輪廢品箱.尺寸和設計 |
|
| BS EN 840-4-1997 |
移動式廢料箱.寬吊耳形或口袋和/或?qū)捠嵝翁嵘b置用四輪容積為770升至1300升帶平蓋的裝料箱.尺寸和設計 |
(Mobile waste containers - Containers with four wheels with a capacity from 750 l to 1700 l with flat lid(s), for wide trunnion or BG-and/or wide comb lifting devices - Dimensions and design) |
| BS EN 840-4-2004 |
移動式廢品箱.寬耳軸式或BG和/或?qū)捠嵝翁嵘b置用容積為1700升及以下的帶平蓋的4輪廢品箱.尺寸和設計 |
|
| BS EN 840-4-2004 |
移動式廢品箱.寬耳軸式或BG和/或?qū)捠嵝翁嵘b置用容積為1700升及以下的帶平蓋的4輪廢品箱.尺寸和設計 |
|
| BS EN 840-4-2004 |
移動式廢品箱.寬耳軸式或BG和/或?qū)捠嵝翁嵘b置用容積為1700升及以下的帶平蓋的4輪廢品箱.尺寸和設計 |
|
| BS EN 840-5-1997 |
移動式廢料箱.性能要求和試驗方法 |
(Mobile waste containers - Performance requirements and test methods) |
| BS EN 840-5-2004 |
移動式廢品箱.性能要求和試驗方法 |
|
| BS EN 840-6-1997 |
移動式廢料箱.安全和健康要求 |
(Mobile waste containers - Safety and health requirements) |
| BS EN 840-6-2004 |
移動式廢品箱.安全和健康要求 |
|
| BS EN 841-1996 |
條碼.碼規范.格式描述 |
(Bar coding - Symbology specifications - Format description) |
| BS EN 842-1996 |
機械安全.視覺損害信號.一般要求,設計和試驗 |
Safety of machinery - Visual danger signals - General requirements, design and testing |
| BS EN 843-1-1995 |
高級技術陶瓷.整體陶瓷.室溫下陶瓷的機械特征.彎曲強度的測定 |
(Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Determination of flexural strength) |
| BS EN 844-1-1995 |
圓木和鋸木.術語.圓木和鋸材的通用術語 |
(Round and sawn timber - Terminology - General terms common to round timber and sawn timber) |
| BS EN 844-10-1998 |
圓木和鋸木.術語.有關斑漬和真菌侵害的術語 |
(Round and sawn timber - Terminology - Terms relating to stain and fungal attack) |
| BS EN 844-11-1998 |
圓木和鋸木.術語.有關昆蟲引起降解的術語 |
(Round and sawn timber - Terminology - Terms relating to degrade by insects) |
| BS EN 844-12-2001 |
圓木和鋸木.術語.附加及通用術語 |
(Round and sawn timber - Terminology - Additional terms and general) |
| BS EN 844-2-1997 |
圓木和鋸木.術語.圓木的通用術語 |
(Round and sawn timber - Terminology - General terms relating to round timber) |
| BS EN 844-3-1995 |
圓木和鋸木.術語.有關鋸材的一般術語 |
(Round and sawn timber - Terminology - General terms relating to sawn timber) |
| BS EN 844-4-1997 |
圓木和鋸木.術語.有關潮氣含量測定的術語 |
(Round and sawn timber - Terminology - Terms relating to moisture content) |
| BS EN 844-5-1997 |
圓木和鋸木.術語.有關圓木尺寸測定的術語 |
(Round and sawn timber - Terminology - Terms relating to dimensions of round timber) |
| BS EN 844-6-1997 |
圓木和鋸木.術語.有關鋸材尺寸測定的術語 |
(Round and sawn timber - Terminology - Terms relating to dimensions of sawn timber) |
| BS EN 844-7-1997 |
圓木和鋸木.術語.有關木材剖面結構的術語 |
(Round and sawn timber - Terminology - Terms relating to anatomical structure of timber) |
| BS EN 844-8-1997 |
圓木和鋸木.術語.有關圓木性能的術語 |
(Round and sawn timber - Terminology - Terms relating to features of round timber) |
| BS EN 844-9-1997 |
圓木和鋸木.術語.有關鋸材性能的術語 |
(Round and sawn timber - Terminology - Terms relating to features of sawn timber) |
| BS EN 845-1-2003 |
磚石附屬件規范.拉桿、帶條、吊架和撐架 |
(Specification for ancillary components for masonry - Ties, tension straps, hangers and brackets) |
| BS EN 845-2-2003 |
磚石附屬件規范.門窗過梁 |
(Specification for ancillary components for masonry - Lintels) |
| BS EN 845-3-2003 |
磚石附屬件規范.鋼篩網底層接縫加筋 |
(Specification for ancillary components for masonry - Bed joint reinforcement of steel meshwork) |
| BS EN 846-10-2000 |
圬工輔助件的試驗方法.磚的負載容量和負載偏離特性的測定 |
(Methods of test for ancillary components for masonry - Determination of load capacity and load deflection characteristics of brackets) |
| BS EN 846-11-2000 |
圬工輔助部件的試驗方法.梁彎曲尺寸的測定 |
(Methods of test for ancillary components for masonry - Determination of dimensions and bow of lintels) |
| BS EN 846-13-2001 |
圬工用的輔助構件的試驗方法.有機涂層耐沖擊性、耐磨性及耐腐蝕性的測定 |
(Methods of test for ancillary components for masonry - Determination of resistance to impact, abrasion and corrosion of organic coatings) |
| BS EN 846-2-2000 |
圬工輔助件的試驗方法.灰漿連接處加筋板接頭的增強床的粘結強度的測定 |
(Methods of test for ancillary components for masonry - Determination of bond strength of prefabricated bed joint reinforcement in mortar joints) |
| BS EN 846-3-2000 |
圬工輔助件的試驗方法.預增強連接處焊接的剪切負載容量的測定 |
(Methods of test for ancillary components for masonry - Determination of shear load capacity of welds in prefabricated bed joint reinforcement) |
| BS EN 846-4-2002 |
圬工輔助部件的試驗方法.固定枷板的負載容量和負載偏離特性的測定 |
(Methods of test for ancillary components for masonry - Determination of load capacity and load-deflection characteristics of straps) |
| BS EN 846-5-2000 |
圬工輔助件的試驗方法.墻拉桿的拉伸和壓縮負載容量和負載代替特性的測定(耦連法) |
(Methods of test for ancillary components for masonry - Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)) |
| BS EN 846-6-2000 |
圬工輔助件的試驗方法.墻拉桿的拉伸和壓縮負載容量和負載代替特性的測定(單末端試驗) |
(Methods of test for ancillary components for masonry - Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)) |
| BS EN 846-7-2000 |
圬工輔助件的試驗方法.剪切桿和滑動桿的拉伸和壓縮負載容量和負載代替特性的測定(灰漿連接處的耦合試驗) |
(Methods of test for ancillary components for masonry - Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connection)) |
| BS EN 846-8-2000 |
圬工輔助件的試驗方法.小梁吊架的拉伸和壓縮負載容量和負載偏轉特性的測定(灰漿連接處的耦合試驗) |
(Methods of test for ancillary components for masonry - Determination of load capacity and load-deflection characteristics of joist hangers) |
| BS EN 846-9-2000 |
圬工輔助件的試驗方法.梁的耐剪切性和耐彎曲性的測定 |
(Methods of test for ancillary components for masonry - Determination of flexural resistance and shear resistance of lintels) |
| BS EN 847-1-1997 |
木工工具.安全要求.銑工具和環狀圓盤鋸刀片 |
(Tools for woodworking - Safety requirements - Milling tools and circular saw blades) |
| BS EN 847-2-2001 |
木工工具.安全要求.固定刀具柄的桿的要求 |
(Tools for woodworking - Safety requirements - Requirements for the shank of shank-mounted milling tools) |
| BS EN 847-3-2004 |
木工工具.安全要求.夾緊裝置 |
|
| BS EN 848-1-1999 |
木工機械的安全.帶旋轉工具的單邊鑄模機.單軸立式鑄模機 |
(Safety of woodworking machines - One side moulding machines with rotating tool - Single spindle vertical moulding machines) |
| BS EN 848-2-1999 |
木工機械的安全.帶旋轉工具的單邊鑄模機.單軸手工加料/綜合加料靠模銑床 |
(Safety of woodworking machines - One side moulding machines with rotating tool - Single spindle handfed/integrated fed routing machines) |
| BS EN 848-3-1999 |
木材加工機械的安全.帶旋轉刀具的單邊鑄模機械.數值控制鏜床和旋轉機械 |
(Safety of woodworking machines - One side moulding machines with rotating tool - Numerical control (NC) boring machines and routing machines) |
| BS EN 849-1997 |
可移動的儲氣瓶.氣瓶閥.規范和定型試驗 |
(Transportable gas cylinders - Cylinder valves - Specification and type testing) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com