標準號 |
中文名稱 |
英文名稱 |
| BS 4311-3-1993 |
量塊和附件規范.第3部分:使用中的量塊 |
(Specification for gauge blocks and accessories - Gauge blocks in use) |
| BS 4313-1988 |
涂料用鉻酸鍶顏料規范 |
(Specification for strontium chromate pigments for paints) |
| BS 4314-1-1968 |
氣體物理分析裝置規范.第1部分:工業用紅外線氣體分析器 |
Specification for apparatus for physical methods of gas analysis - Infra-red gas analysers for industrial use |
| BS 4315-2-1970 |
耐透氣性和耐透水性的試驗方法.第2部分:滲透性墻結構(透水) |
Methods of test for resistance to air and water penetration - Permeable walling constructions (water penetration) |
| BS 4316-1968 |
紅細胞壓積測量器具規范 |
Specification for apparatus for measurement of packed red cell volume |
| BS 4317-1-1980 |
谷類作物和豆科作物的試驗方法.第1部分:干粒重量的測定 |
(Methods of test for cereals and pulses - Determination of the mass of 1000 grains) |
| BS 4317-10-1993 |
谷類和豆類試驗方法.第10部分:谷類和磨碎谷類產品灰分測定 |
(Methods of test for cereals and pulses - Determination of ash of cereals and milled cereal products) |
| BS 4317-11-1976 |
谷類作物和豆科作物的試驗方法.第11部分:豆科作物中配糖氫氰酸含量的測定 |
(Methods of test for cereals and pulses - Determination of glycosidic hydrocyanic acid in pulses) |
| BS 4317-12-1980 |
谷類作物和豆科作物的試驗方法.第12部分:小麥粉中濕谷蛋白的測定 |
(Methods of test for cereals and pulses - Determination of wet gluten in wheat flour) |
| BS 4317-13-1993 |
谷類作物和豆科作物的試驗方法.第13部分:小麥沉淀指數的測定(譯倫尼試驗) |
Methods of test for cereals and pulses - Determination of sedimentation index for wheat (Zeleny test) |
| BS 4317-15-1981 |
谷類作物和豆科作物的試驗方法.第15部分:玉米(粉碎的和整粒的)含水量的測定 |
Methods of test for cereals and pulses - Determination of moisture content of maize (milled and whole) |
| BS 4317-16-1981 |
谷類作物和豆科作物的試驗方法.第16部分:小麥粉中干谷蛋白含量的測定 |
Methods of test for cereals and pulses - Determination of dry gluten in wheat flour |
| BS 4317-18-1988 |
谷類作物和豆科作物的試驗方法.第18部分:潛在蟲害的測定 |
Methods of test for cereals and pulses - Determination of hidden insect infestation |
| BS 4317-19-1990 |
谷類作物和豆科作物的試驗方法.十二烷基硫酸鈉(SDS)試驗法測定小麥蛋白質質量 |
(Methods of test for cereals and pulses - Determination of protein quality of wheat by the sodium dodecyl sulphate (SDS) test) |
| BS 4317-1990 |
谷類作物和豆科作物的試驗方法.第19部分:小麥蛋白質質量的十二烷基硫酸鈉(SDS)試驗測定法 |
Methods of test for cereals and pulses. Determination of protein quality of wheat by the sodium dodecyl sulphate (SDS) test |
| BS 4317-2-1987 |
谷類作物和豆科作物的試驗方法.第2部分:谷類作物和谷物產品水份含量的測定(比較法) |
(Methods of test for cereals and pulses - Determination of moisture content of cereals and cereal products (reference method)) |
| BS 4317-20-1999 |
谷物和豆類的試驗方法.用淀粉測定記錄儀測定面粉的吸水性和生面團的流變性能 |
Methods of test for cereals and pulses - Determination of water absorption of flour and rheological properties of doughs using a farinograph |
| BS 4317-21-1999 |
谷物和豆類的試驗方法.用伸長記錄測定儀測定生面團的流變性能 |
Methods of test for cereals and pulses - Determination of rheological properties of doughs using an extensograph |
| BS 4317-22-1989 |
谷物和豆類的試驗方法.第22部分:使用稠度記錄測定儀測定面粉吸水性和生面團的流變性 |
(Methods of test for cereals and pulses - Determination of water absorption of flour and rheological properties of doughs using a valorigraph) |
| BS 4317-24-1990 |
谷類作物和豆科作物的試驗方法.第24部分:谷類作物用濕度計校準的檢驗方法 |
(Methods of test for cereals and pulses - Method of checking the calibration of moisture meters for cereals) |
| BS 4317-25-1990 |
谷物和豆類的試驗方法.第25部分:用機械手段測定小麥粉中面筋含量 |
Methods of test for cereals and pulses - Determination of wet gluten content in wheat flour by mechanical means |
| BS 4317-26-1991 |
谷類作物和豆科的試驗方法.第26部分:散裝谷物儲藏溫度的測量 |
(Methods of test for cereals and pulses - Measurement of temperature of grain during bulk storage) |
| BS 4317-28-1993 |
谷類作物和豆料作物的試驗方法.第28部分:使用(淀粉)粘 力測量器測定面粉的粘性 |
(Methods of test for cereals and pulses - Determination of viscosity of flour using an amylograph) |
| BS 4317-29-1993 |
谷類和豆類試驗方法.第29部分:面粉和硬質小麥面粉中動物因素雜質的測定 |
(Methods of test for cereals and pulses - Determination of impurities of animal origin in wheat flour and durum wheat semolina) |
| BS 4317-3-1999 |
谷類作物和豆類作物的試驗方法.谷類作物和谷類產品水分含量的測定(例行參考法) |
(Methods of test for cereals and pulses - Determination of moisture content of cereals and cereal products (routine reference method)) |
| BS 4317-30-1994 |
谷類和豆類試驗方法.第30部分:通過電泳法對小麥品種進行鑒定 |
(Methods of test for cereals and pulses - Identification of wheat varieties by electrophoresis) |
| BS 4317-31-1995 |
谷類作物和豆類作物的試驗方法.硬粒小麥粉和粗粒粉中黃顏料含量的測定 |
(Methods of test for cereals and pulses - Determination of yellow pigment content in durum wheat flour and semolina) |
| BS 4317-32-1996 |
谷類作用和豆類作物的試驗方法.每百公升中谷類密度的試驗方法 |
(Methods of test for cereals and pulses - Determination of bulk density of cereals, called ’mass per hectolitre’ (routine method)) |
| BS 4317-4-1991 |
谷物和豆類的試驗方法.第4部分:豆類中的雜質、粘度、外部氣味、昆蟲、種和變種的測定 |
(Methods of test for cereals and pulses - Determination of impurities, size, foreign odours, insects, and species and variety in pulses) |
| BS 4317-9-1982 |
谷類作物和豆科作物的試驗方法.第9部分:谷類作物脫落值的測定 |
(Methods of test for cereals and pulses - Determination of falling number of cereals) |
| BS 4319-1-1968 |
電子管和電子閥(包括微波器件)電氣特性的測量方法.測量等效輸入和輸出導納的基本條件 |
(Methods of measurement of the electrical properties of electronic tubes and valves (excluding microwave devices) - Essential conditions for measuring equivalent input and output admittances) |
| BS 4320-1968 |
一般工程用金屬墊圈規范.米制系列 |
(Specification for metal washers for general engineering purposes - Metric series) |
| BS 4322-1968 |
醫院用車輛(如手推車)減震器推薦標準 |
(Recommendations for buffering on hospital vehicles such as trolleys) |
| BS 4323-1979 |
自由蒸氣引起的織物尺寸變化的測定方法 |
(Method for determination of dimensional change of fabrics induced by free steam) |
| BS 4325-1-1978 |
油料種子殘余物的分析方法.第1部分:水分及揮發物含量的測定 |
(Methods for analysis of oilseed residues - Determination of moisture and volatile matter content) |
| BS 4325-12-1996 |
油料種子殘余物的分析方法.使用高效液相色譜法對葡萄糖異硫氰酸鹽含量的測定 |
(Methods for analysis of oilseed residues - Determination of glucosinolates content by high-performance liquid chromatography) |
| BS 4325-14-2000 |
油料種子殘留物的分析方法.油和水含量的測定.脈沖核磁共振分光測定法 |
(Methods for analysis of oilseed residues - Simultaneous determination of oil and water contents - Method using pulsed nuclear magnetic resonance spectroscopy) |
| BS 4325-2-1978 |
油料種子殘余物的分析方法.第2部分:總灰分的測定 |
(Methods for analysis of oilseed residues - Determination of total ash) |
| BS 4325-3-1978 |
油料種子殘余物的分析方法.第3部分:鹽酸不溶灰分的測定 |
(Methods for analysis of oilseed residues - Determination of ash insoluble in hydrochloric acid) |
| BS 4325-5-1978 |
油料種子殘余物的分析方法.第5部分:二乙醚萃取物的測定 |
(Methods for analysis of oilseed residues - Determination of diethyl ether extract) |
| BS 4325-6-1989 |
油料種子殘余物的分析方法.第6部分:大豆產品中脲酶活性的測定 |
Methods for analysis of oilseed residues - Determination of urease activity of soya bean products |
| BS 4325-9-1992 |
油種殘留物分析方法.試樣制備 |
Methods for analysis of oilseed residues - Preparation of test samples |
| BS 4337-1968 |
手推托架搬運車的主要尺寸規范 |
(Specification for principal dimensions of hand-operated stillage trucks) |
| BS 434-1-1984 |
鋪路用乳化瀝青(陽離子和陰離子型).第1部分:鋪路用乳化瀝青規范 |
(Bitumen road emulsions (anionic and cationic) - Specification for bitumen road emulsions) |
| BS 434-2-1984 |
鋪路用乳化瀝青(陽離子和陰離子型).第2部分:鋪路用乳化瀝青的實用規程 |
(Bitumen road emulsions (anionic and cationic) - Code of practice for use of bitumen road emulsions) |
| BS 4341 Addendum No. 1-1971 |
甲酸的試驗方法 |
Methods of test for formic acid |
| BS 4341-1968 |
甲酸的試驗方法 |
(Methods of test for formic acid) |
| BS 4344-1968 |
與天然和合成纖維繩索配合使用的滑輪組 |
(Pulley blocks for use with natural and synthetic fibre ropes) |
| BS 4345-1968 |
帶槽角鐵規范 |
(Specification for slotted angles) |
| BS 4357-1968 |
預制水磨石構件規范 |
(Specification for precast terrazzo units) |
| BS 4358-1968 |
空氣計量術語詞匯(附有技術注釋) |
(Glossary of terms used in air gauging with notes on the technique) |
| BS 4359-1-1996 |
粉末比表面積的測定.第一部分:氣體表面吸附(BET)推薦方法(包括多孔物質) |
(Determination of the specific surface area of powders - BET method of gas adsorption for solids (including porous materials)) |
| BS 4359-2-1982 |
粉末比表面積的測定.第2部分:空氣滲透氣率方法 |
(Determination of the specific surface area of powders - Recommended air permeability methods) |
| BS 4359-4-1995 |
粉末表面系數的測定.第4部分:使用氣體表面吸附(BET)技術測定金屬表面積的推薦方法 |
(Determination of the specific surface area of powders - Recommendations for methods of determination of metal surface area using gas adsorption techniques) |
| BS 436-3-1986 |
直齒輪和斜齒輪.第3部分:金屬漸開線齒輪的接觸和齒根彎曲應力極限計算方法 |
(Spur and helical gears - Method for calculation of contact and root bending stress limitations for metallic involute gears) |
| BS 436-4-1996 |
正齒圓柱齒輪和螺旋齒輪.齒輪嚙合的對應齒根面的相應偏差的容許值和定義 |
(Spur and helical gears - Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth) |
| BS 436-5-1997 |
齒輪和螺旋齒輪.齒輪嚙合的對應齒根面的相應偏差的容許值和定義 |
(Spur and helical gears - Definitions and allowable values of deviations relevant to radial composite deviations and runout information) |
| BS 4361-0-1990 |
木工機械.第0部分:木工機械和木工用輔助機械的分類 |
(Woodworking machines - Classification of woodworking machines and auxiliary machines used for woodworking) |
| BS 4361-1-1968 |
木工機械.第1部分:部組件 |
(Woodworking machines - Components) |
| BS 4361-10-1988 |
木工機械.第10部分:單面刨光用帶組合銑刀的平面刨床規范 |
(Woodworking machines - Specification for surface planing machines with cutterblock for one-side dressing) |
| BS 4361-11-1988 |
木工機械.第11部分:單軸鉆床規范 |
(Woodworking machines - Specification for single spindle boring machines) |
| BS 4361-12-1988 |
木工機械.第12部分:開鉚機規范 |
(Woodworking machines - Specification for slot mortising machines) |
| BS 4361-13-1988 |
木工機械.第13部分:兩面、三面和四面模壓機床規范 |
(Woodworking machines - Specification for two-, three- and four-side moulding machines) |
| BS 4361-14-1988 |
木工機械.第14部分:鏤銑機規范 |
(Woodworking machines - Specification for routing machines) |
| BS 4361-15-1988 |
木工機械.第15部分:單板包裝邊緣剪切機規范 |
(Woodworking machines - Specification for veneer pack edge shears) |
| BS 4361-16-1988 |
木工機械.第16部分:單鏈插床規范 |
(Woodworking machines - Specification for single chain mortising machines) |
| BS 4361-17-1988 |
木工機械.第17部分:徑向圓鋸規范 |
(Woodworking machines - Specification for radial circular saws) |
| BS 4361-18-1989 |
木工機械.第18部分:實木和裝板縱向切割用單鋸片往復圓鋸規范 |
(Woodworking machines - Specification for single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels) |
| BS 4361-19-1989 |
木工機械.齊兩邊精密圓鋸床規范 |
(Woodworking machines - Specification for double edging precision circular sawing machines) |
| BS 4361-1989 |
木工機械 第19部分:齊兩邊精密圓鋸床規范 |
(Woodworking machines. Specification for double edging precision circular sawing machines) |
| BS 4361-2.12-1974 |
木工機械.第2部分:精度試驗.第12節:手動靠模銑床 |
(Specification for woodworking machines. Accuracy tests. Routing machines) |
| BS 4361-2.13-1974 |
木工機械.第2部分:精度試驗.第13節:車床 |
(Specification for woodworking machines. Accuracy tests. Turning lathes) |
| BS 4361-20-1990 |
木工機械.第20部分:具有移動工作臺的單鋸片圓鋸床規范 |
(Woodworking machines - Specification for single blade circular sawing machines with travelling table) |
| BS 4361-21-1989 |
木工機械 第21部分:車床規范 |
(Woodworking machines - Specification for turning lathes) |
| BS 4361-22-1990 |
木工機械.第22部分:雙端開榫機規范 |
(Woodworking machines - Specification for double-end tenoning machines) |
| BS 4361-23-1990 |
木工機械.第23部分:具有滑動工作臺或框架的窄帶磨光機名稱 |
(Woodworking machines - Nomenclature for narrow belt sanding machines with sliding table or frame) |
| BS 4361-24-1990 |
木工機械.第24部分:多軸鉆床命名 |
(Woodworking machines - Nomenclature for multi-spindle boring machines) |
| BS 4361-25-1990 |
木工機械.第25部分:萬能工具和刀具刃磨機命名 |
(Woodworking machines - Nomenclature for universal tool and cutter sharpeners) |
| BS 4361-26-1990 |
木工機械.第26部分:帶鋸鋸片刃磨機命名 |
(Woodworking machines - Nomenclature for bandsaw blade sharpening machines) |
| BS 4361-27-1990 |
木工機械.第27部分:帶固定軸的盤式砂光機命名 |
(Woodworking machines - Nomenclature for disc sanding machines with spindle in fixed position) |
| BS 4361-28-1990 |
木工機械.隔板涂層機命名 |
(Woodworking machines - Nomenclature for curtain coating machines) |
| BS 4361-29-1990 |
木工機械.第29部分:寬帶磨光機命名 |
(Woodworking machines - Nomenclature for wide belt sanding machines) |
| BS 4361-3-1972 |
木工機械.第3部分:機床尺寸及加工能力 |
(Specification for woodworking machines - Machine sizes and capacities) |
| BS 4361-30-1990 |
木工機械.第30部分:平滑表面手工上料平面膠合壓力機命名 |
(Woodworking machines - Nomenclature for hand-loading veneering presses for flat surfaces) |
| BS 4361-31-1990 |
木工機械.第31部分:交叉膠合板粘接機命名 |
Woodworking machines - Nomenclature for crosswise veneer splicing machines |
| BS 4361-32-1990 |
木工機械.第32部分:單端邊緣粘合機命名 |
(Woodworking machines - Nomenclature for single-end edge bonding machines) |
| BS 4361-33-1990 |
木工機械.膠合板刨片機命名 |
(Woodworking machines - Nomenclature for veneer slicing machines) |
| BS 4361-34-1990 |
木工機械.第34部分:具有擺動式刀具的鑿榫機命名 |
(Woodworking machines - Nomenclature for mortising machines with oscillating tool action) |
| BS 4361-35-1990 |
木工機械.第35部分:由板條制造心板料用機器命名 |
(Woodworking machines - Nomenclature for machines for production of core stock from laths) |
| BS 4361-36-1990 |
木工機械.第36部分:多軸單端開榫機名命 |
(Woodworking machines - Nomenclature for single-end tenoning machines with several spindles) |
| BS 4361-37-1990 |
木工機械.第37部分:四效木絲生產用臥式切絲機命名 |
(Woodworking machines - Nomenclature for horizontal shredding machines for wood wool production, quadruple effect) |
| BS 4361-38-1990 |
木工機械.第38部分:木絲生產用帶液壓夾緊裝置的立式切絲機命名 |
(Woodworking machines - Nomenclature for vertical shredding machines for wood wool production, with hydraulic clamping) |
| BS 4361-39-1990 |
木工機械.第39部分:建筑工地用圓鋸床命名 |
(Woodworking machines - Nomenclature for circular sawing machines for building sites) |
| BS 4361-4-1988 |
木工機械.第4部分:臺式帶鋸機床規范 |
(Woodworking machines - Specification for table bandsawing machines) |
| BS 4361-40-1990 |
木工機械.升降工作臺和平臺命名 |
(Woodworking machines - Nomenclature for lifting tables and stages) |
| BS 4361-5-1988 |
木工機械.第5部分:帶或不帶移動工作臺的單鋸片圓鋸床規范 |
(Woodworking machines - Specification for single blade circular saw benches with or without travelling table) |
| BS 4361-6-1988 |
木工機械.第6部分:單軸模壓機床規范 |
(Woodworking machines - Specification for single spindle moulding machines) |
| BS 4361-7-1988 |
木工機械.第7部分:單面刨光用帶旋轉組合銑刀的單面壓刨床規范 |
(Woodworking machines - Specification for thickness planing machines with rotary cutterblock for one-side dressing) |
| BS 4361-8-1988 |
木工機械.第8部分:2面、3面或4面刨光用刨床規范 |
(Woodworking machines - Specification for planing machines for two-, three- or four-side dressing) |
| BS 4361-9-1988 |
木工機械.第9部分:平面刨床和單面壓刨床規范 |
(Woodworking machines - Specification for surface planing and thicknessing machines) |
| BS 4363-1998 |
施工和建筑工地降低壓電源配電設備規范 |
(Specification for distribution assemblies for reduced low voltage electricity supplies for construction and building sites) |
| BS 4364-1993 |
工業用氧氣規范 |
(Specification for industrial oxygen) |
| BS 4366-1993 |
工業氮規范 |
(Specification for industrial nitrogen) |
| BS 4367-1968 |
硝酸的試驗方法 |
(Methods of test for nitric acid) |
| BS 4368-1-1998 |
管用壓縮連接件.分裂聚集壓縮配件 |
(Metallic tube connectors for fluid power and general use - Split collet compression fittings) |
| BS 4368-4-1984 |
管用壓合接頭.定型試驗要求規范 |
(Metallic tube connectors for fluid power and general use - Specification for type test requirements) |
| BS 437-1978 |
鑄鐵套接式排水管及配件規范 |
(Specification for cast iron spigot and socket drain pipes and fittings) |
| BS 4370-3-1988 |
硬質微孔材料的試驗方法.第3部分:方法12-13 |
(Methods of test for rigid cellular materials - Methods 12 and 13) |
| BS 4370-4-1991 |
硬質微孔材料的試驗方法.第4部分:方法14:彎曲性能測定 |
(Methods of test for rigid cellular materials - Method 14 - Determination of flexural properties) |
| BS 4371-1991 |
纖維質密封墊規范 |
(Specification for fibrous gland packings) |
| BS 4372-1968 |
工程人員用鋼量尺規范 |
(Specification for engineers’ steel measuring rules) |
| BS 4376-1-1991 |
電動血液冷藏箱規范.第1部分:閉式冷藏型 |
(Electrically operated blood storage refrigerators - Specification for closed reach-in types) |
| BS 4376-2-1996 |
電動血液冷藏箱規范.第2部分:冷凍血漿儲藏柜規范 |
(Electrically operated blood storage refrigerators - Specification for cabinets for the storage of frozen plasma) |
| BS 4377-1991 |
螺紋鑲齒金屬絲錐進行孔攻絲的規范(ISO米制螺紋) |
(Specification for tapping of holes to receive wire thread inserts (ISO metric threads)) |
| BS 4390-1969 |
輕便式氣動磨床規范 |
(Specification for portable pneumatic grinding machines) |
| BS 4393-1991 |
組件終端用的可焊覆錫或錫-鉛涂覆導線規范 |
(Specification for solderable tin or tin-lead coated wires for component terminations) |
| BS 4395-1-1969 |
結構工程用高強度摩擦扣緊螺栓和配套螺母及墊圈規范.第1部分:一般等級 |
(Specification for high strength friction grip bolts and associated nuts and washers for structural engineering - General grade) |
| BS 4395-2-1969 |
結構工程用高強度摩擦扣緊螺栓和配套螺母及墊圈規范.第2部分:較高等級的螺栓、螺母和一般等級的墊圈 |
(Specification for high strength friction grip bolts and associated nuts and washers for structural engineering - Higher grade bolts and nuts and general grade washers) |
| BS 4401-1-1998 |
肉及肉制品的試驗方法.第1部分:總灰分的測定 |
(Methods of test for meat and meat products - Determination of total ash) |
| BS 4401-10-1997 |
肉及肉制品的試驗方法.第10部分:磷總含量的測定.光度測量法 |
(Methods of test for meat and meat products - Determination of total phosphorus content - Spectrometric method) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com