標準號 |
中文名稱 |
英文名稱 |
| BS 6101-4-1987 |
機床滾珠絲杠.第4部分:靜態軸向剛性計算法 |
(Machine tool ball screws - Method of calculation of static axial rigidity) |
| BS 6101-5-1992 |
機床滾珠絲杠.第5部分:公稱直徑和額定負載規范 |
(Machine tool ball screws - Specification for nominal diameters and nominal leads) |
| BS 6101-6-1990 |
機床滾珠絲杠.第6部分:絲杠用球狀螺母和基本尺寸規范 |
(Machine tool ball screws - Specification for ball nuts and principal dimensions of ball screws) |
| BS 6102-1-1992 |
自行車.自行車安全要求規范 |
(Cycles - Specification for safety requirements for bicycles) |
| BS 6102-10-1987 |
自行車.第10部分:自行車車叉上裝配頂部用的螺紋規范 |
(Cycles - Specification for screw threads used to assemble head fittings on bicycle forks) |
| BS 6102-11-1991 |
自行車.第11部分:車把主管和彎管組裝尺寸規范 |
(Cycles - Specification for assembly dimensions for stem and handlebar bend) |
| BS 6102-12-1991 |
自行車.車把主管楔角規范 |
(Cycles - Specification for stem wedge angle) |
| BS 6102-13-1991 |
自行車.第13部分:花鍵轂和后鏈輪的配合尺寸規范 |
(Cycles - Specification for mating dimensions for splined hub and sprocket) |
| BS 6102-14-1991 |
自行車.第14部分:有方頭配件的底托架軸和曲柄組件尺寸規范 |
Cycles - Specification for dimensions of bottom bracket axle and crank assembly with square end fittings |
| BS 6102-15-1991 |
自行車.第15部分:輻條螺紋接頭的尺寸規范 |
(Cycles - Specification for dimensions of spoke nipples) |
| BS 6102-16-1997 |
自行車.更新制動塊的規范 |
(Cycles - Specification for replacement brake blocks) |
| BS 6102-2-1982 |
自行車.第2部分:反光裝置的光學要求和物理要求規范 |
(Cycles - Specification for photometric and physical requirements of reflective devices) |
| BS 6102-3-1986 |
自行車.照明玻璃的光度和物理要求規范 |
(Cycles - Specification for photometric and physical requirements of lighting equipment) |
| BS 6102-4-1991 |
自行車.第4部分:術語匯編 |
(Cycles - Glossary of terms) |
| BS 6102-5-1998 |
自行車.自行車輪命名與符號及尺寸規范 |
(Cycles - Specification for bicycle tyre designations and dimensions) |
| BS 6102-6-1997 |
自行車.第6部分:腳踏車車輞規范 |
(Cycles - Specification for bicycle rims) |
| BS 6102-8-1990 |
自行車.第8部分:自行車軸套上裝配飛輪用的螺紋規范 |
(Cycles - Specifications for screw threads used to assemble freewheels on bicycle hubs.) |
| BS 6102-9-1990 |
自行車.第9部分:底托組件用的螺紋規范 |
(Cycles - Specification for screw threads used in bottom bracket assemblies) |
| BS 6103-1986 |
單孔并裝有絕緣套管的心軸操作的電子件的裝配尺寸規范 |
(Specification for dimensions for the mounting of single-hole, bush-mounted spindle operated electronic components) |
| BS 6106-1981 |
消毒牛奶用一品脫(568ml)重復使用玻璃瓶 |
(Specification for 1 pint (568 ml) multi-trip glass bottles for pasteurized milk) |
| BS 6107-3-1992 |
滾動軸承.公差.第3部分:徑向內部間隙規范 |
(Rolling bearings: tolerances - Specifications for radial internal clearance) |
| BS 6109-2-1989 |
車尾部升降機、移動式升降機和車載式升降斜梯.第2部分:載客升降機和斜梯實用規程 |
(Tail lifts, mobile lifts and ramps associated with vehicles - Code of practice for passenger lifts and ramps) |
| BS 611-2-1990 |
陪替氏培養皿.第2部分:一次使用的陪替氏塑料培養皿規范 |
(Petri dishes - Specification for plastics Petri dishes for single use) |
| BS 6111-1981 |
測量耳機助聽器時用參考耦合器規范 |
(Specification for reference coupler for the measurement of hearing aids using earphones coupled to the ear by means of ear inserts) |
| BS 6113-1981 |
運土用自動傾卸車車箱容積額定值確定的方法 |
(Method for volumetric rating of dumper bodies used for earth-moving) |
| BS 6114-1987 |
運土用升降鏟運機額定容量的測量方法 |
(Method for measurement of volumetric ratings of elevating scrapers used for earth-moving) |
| BS 6117-1981 |
淡匍萄酒用玻璃瓶規范 |
(Specification for glass bottles for light wine) |
| BS 6118-1981 |
重復使用的啤酒和蘋果酒玻璃酒瓶規范 |
(Specification for multi-trip glass bottles for beer and cider) |
| BS 6119-1-1981 |
充碳酸氣的軟飲料用玻璃瓶.第1部分:重復使用的750ml和1l瓶規范 |
(Glass bottles for carbonated soft drinks - Specification for 750 ml and 1 litre multi-trip bottles) |
| BS 6120-1988 |
工業用低壓開關設備和控制裝置規范.A型交流雙引線感應式近距離開關 |
(Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form A, for alternating current, 2 terminals) |
| BS 6121-2-1989 |
機械制電纜密封套.第2部分:聚合物電纜密封套規范 |
(Mechanical cable glands - Specification for polymeric glands) |
| BS 6121-3-1990 |
機械制電纜密封套.第3部分:專用耐腐蝕夾套規范 |
(Mechanical cable glands - Specification for special corrosion resistant glands) |
| BS 6121-5-1993 |
電纜機械密封套.第5部分:電氣安裝中使用的電纜密封套的選擇、安裝和檢驗實施準則 |
(Mechanical cable glands - Code of practice for selection, installation and inspection of cable glands used in electrical installations) |
| BS 6122-1988 |
工業用低壓開關設備和控制裝置規范.C型交流雙引線感應式近距離開關 |
(Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form C, for alternating current, 2 terminals) |
| BS 6123-1988 |
工業用低壓開關設備和控制裝置規范.D型交流雙引線感應式近距離開關 |
(Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form D, for alternating current, 2 terminals) |
| BS 6125-1981 |
天然纖維索、繩和線規范 |
(Specification for natural fibre cords, lines and twines) |
| BS 6127-1-1995 |
煙煤和無煙煤的巖相分析.有關煙煤和無煙煤巖相分析的術語詞匯 |
(Petrographic analysis of bituminous coal and anthracite - Glossary of terms relating to the petrographic analysis of bituminuous coal and anthracite) |
| BS 6127-2-1982 |
煙煤和無煙煤的巖相分析.第2部分:巖相分析用煤樣的制備方法 |
(Petrographic analysis of bituminous coal and anthracite - Method of preparing coal samples for petrographic analysis) |
| BS 6127-3-1995 |
煙煤和無煙煤的巖相分析.煙煤和無煙煤的顯微組分的測定方法 |
(Petrographic analysis of bituminous coal and anthracite - Method of determining maceral group composition of bituminous coal and anthracite) |
| BS 6127-4-1990 |
煙煤和無煙煤的巖相分析.第4部分:煤巖顯微類型、碳礦質和礦質成分的測定方法 |
(Petrographic analysis of bituminous coal and anthracite - Method of determining microlithotype, carbominerite and minerite composition) |
| BS 6127-5-1995 |
煙煤和無煙煤的巖相分析.顯微鏡下測定鏡質體反射率的方法 |
(Petrographic analysis of bituminous coal and anthracite - Method of determining microscopically the reflectance of vitrinite) |
| BS 6128-13-1983 |
熱固樹脂制工業用層壓桿及管.第13部分:矩形模制管規范 |
(Industrial laminated rods and tubes based on thermosetting resins - Specification for rectangular moulded tubes) |
| BS 6128-6-1981 |
熱固樹脂制工業用層壓桿及管.第6部分:六角形模制棒規范 |
(Industrial laminated rods and tubes based on thermosetting resins - Specification for hexagonal moulded rods) |
| BS 6129-1-1981 |
壓力系統用波紋管膨脹節的選擇和應用實用規程.第1部分:金屬波紋管膨脹節 |
(Code of practice for the selection and application of bellows expansion joints for use in pressure systems - Metallic bellows expansion joints) |
| BS 613-1977 |
抑止電磁干擾用的部件和濾波器組件規范 |
(Specification for components and filter units for electromagnetic interference suppression) |
| BS 6130-1-1993 |
地瀝青及瀝青用軟管及軟管部件.金屬軟管及軟管部件規范 |
(Hose and hose assemblies for asphalt and bitumen - Specification for flexible metallic hose and hose assemblies) |
| BS 6131-1982 |
家用縫紉機的術語詞匯 |
(Glossary of terms relating to household sewing machines) |
| BS 6132-1983 |
堿性可充電電池和蓄電池的安全操作實用規程 |
(Code of practice for safe operation of alkaline secondary cells and batteries) |
| BS 6133-1995 |
鉛酸固定蓄電池的安全操作實用規程 |
(Code of practice for safe operation of lead-acid stationary batteries) |
| BS 6134-1992 |
壓力和真空開關規范 |
(Specification for pressure and vacuum switches) |
| BS 6137-1982 |
錫鉛合金的電鍍層規范 |
(Specification for electroplated coatings of tin/lead alloys) |
| BS 6140-1-1981 |
產生振動用試驗設備.第1部分:產生振動用電動試驗設備性能的表述方法 |
(Test equipment for generating vibration - Methods of describing characteristics of electrodynamic test equipment for generating vibration) |
| BS 6140-2-1982 |
產生振動用試驗設備.第2部分:產生振動用試驗設備輔助臺特性的表述方法 |
(Test equipment for generating vibration - Methods of describing characteristics of auxiliary tables for test equipment for generating vibration) |
| BS 6142-1981 |
農用拖拉機和機械中液壓系統技術數據的表示規范 |
(Specification for presentation of technical data on hydraulic systems of agricultural tractors and machinery) |
| BS 6143-1-1992 |
質量經濟學指南.工藝過程成本模型 |
(Guide to the economics of quality - Process cost model) |
| BS 6143-2-1990 |
質量經濟學導則.預防、評估和失效模式 |
(Guide to the economics of quality - Prevention, appraisal and failure model) |
| BS 6144-1990 |
非排放式熱水供應系統用的采用內隔膜的膨脹器規范 |
(Specification for expansion vessels using an internal diaphragm, for unvented hot water supply systems) |
| BS 6147-1989 |
鐵礦石體積密度的試驗方法.第2部分:最大粒度超過40mm的鐵礦石樣品體積密度的測定方法 |
(Methods for determination of bulk density of iron ores) |
| BS 6148-8-1981 |
商業用冷藏柜試驗方法.第8部分:意外機械接觸試驗 |
(Methods of test for commercial refrigerated cabinets - Test for accidental mechanical contact) |
| BS 615-1953 |
凱氏量瓶規范 |
(Specification for Kohlrausch flasks) |
| BS 6150-1991 |
建筑物涂料實用規程 |
(Code of practice for painting of buildings) |
| BS 6155-1990 |
大牲畜獸醫麻醉用氣管插管規范 |
(Specification for tracheal tubes for large animals in veterinary anaesthesia) |
| BS 6156-1981 |
采用氟化處理過的碳?xì)渚酆衔锝^緣的低頻微型設備用單芯或多芯單股線規范 |
(Specification for low-frequency miniature equipment wires with solid or stranded conductor, fluorinated polyhydrocarbon type insulation, single) |
| BS 6160-1-1989 |
移動通信用無線電設備.第1部分:一般要求和測試條件 |
(Radio equipment used in mobile services - General requirements and conditions of measurement) |
| BS 6160-3-1990 |
移動通信用無線電設備.第3部分:A3E或F3E發射的接收機的測量方法 |
(Radio equipment used in mobile services - Methods of measurement for receivers for A3E or F3E emissions) |
| BS 6160-4-1981 |
移動通信用無線電設備.第4部分:使用單邊帶發射的發射機(A3A,A3H或A3J) |
(Radio equipment used in mobile services - Transmitters employing single-sideband emissions (A3A, A3H or A3J)) |
| BS 6160-5-1989 |
移動通信用無線電設備.第5部分:使用單邊帶技術(R3E,H3E或J3E)接收機的測試方法 |
(Radio equipment used in mobile services - Methods of measurement for receivers employing single-sideband techniques (R3E, H3E or J3E)) |
| BS 6160-8-1994 |
移動設備中使用的無線電設備.天線的測量方法 |
(Radio equipment used in mobile services - Methods of measurement for antennas) |
| BS 6161-11-1985 |
鋁及其合金的陽極氧化鍍層的試驗方法.第11部分:用光電反射計測量全反射 |
(Methods of test for anodic oxidation coatings on aluminium and its alloys - Measurement of total reflectance using a photoelectric reflectometer) |
| BS 6161-14-1987 |
鋁及其合金的陽極氧化鍍層的試驗方法.第14部分:紅外反射率的測定 |
(Methods of test for anodic oxidation coatings on aluminium and its alloys - Determination of infra-red reflectance) |
| BS 6161-18-1991 |
鋁及其合金的陽極氧化鍍層的試驗方法.表面耐磨強度的測定 |
(Methods of test for anodic oxidation coatings on aluminium and its alloys - Determination of surface abrasion resistance) |
| BS 6161-1993 |
鋁及其合金的陽極氧化鍍層的試驗方法.第19部分:圖象清晰度的測定.儀器測定法 |
(Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of image clarity. Instrumental method) |
| BS 6161-7-1984 |
鋁及其合金的陽極氧化鍍層的試驗方法.第7部分:使用人造光的陽極氧化有色涂層的耐光度的加速測定法 |
(Methods of test for anodic oxidation coatings on aluminium and its alloys - Accelerated determination of light fastness of coloured anodic oxidation coatings using artificial light) |
| BS 6162-1981 |
聚烯烴類機紡紗線制開口袋規范 |
(Specification for open-mouth sacks manufactured from woven polyolefin tape yarn) |
| BS 6164-2001 |
建筑業中開挖隧道的安全操作規程 |
(Code of practice for safety in tunnelling in the construction industry) |
| BS 6165-2002 |
小型輕便噴霧滅火器規范 |
(Specification for small disposable fire extinguishers of the aerosol type) |
| BS 6166-1-1986 |
升降裝置.第1部分:額定值方法 |
(Lifting slings - Methods of rating) |
| BS 6166-2-1986 |
升降裝置.第2部分:標記 |
(Lifting slings - Specification for marking) |
| BS 6166-3-1988 |
起重吊索.多用途起重吊索選擇及安全指南 |
(Lifting slings - Guide to the selection and safe use of lifting slings for multi-purposes) |
| BS 6168-1987 |
非金屬齒輪規范 |
(Specification for non-metallic spur gears) |
| BS 6169-1-1981 |
液態烴類體積測量方法.第1部分:置換流量計系統(配劑泵除外) |
(Methods for volumetric measurement of liquid hydrocarbons - Displacement meter systems (other than dispensing pumps)) |
| BS 6169-2-1984 |
液態烴類體積測量方法.第2部分:濁度計系統或相對比重 |
(Methods for volumetric measurement of liquid hydrocarbons - Turbine meter systems) |
| BS 6170-1981 |
亞麻帆布水桶規范 |
(Specification for flax canvas water buckets) |
| BS 6172-1990 |
家用燃?xì)馀胝{(diào)設備(1、2、3類家用燃?xì)?安裝規范 |
(Specification for installation of domestic gas cooking appliances (1st, 2nd and 3rd family gases)) |
| BS 6172-2004 |
家用燃?xì)馀胝{(diào)設備(2、3類家用燃?xì)?的安裝和維護.規范 |
|
| BS 6173-2001 |
公共飲食業用各型燃?xì)庠O(shè)備(2、3類家用燃?xì)?安裝規范 |
(Specification for installation of gas-fired catering appliances for use in all types of catering establishments (2nd and 3rd family gases)) |
| BS 6174-1982 |
有電輸出的差壓傳感器規范 |
(Specification for differential pressure transmitters with electrical outputs) |
| BS 6177-1982 |
建筑物隔震用合成橡膠座的選擇與使用指南 |
(Guide to selection and use of elastomeric bearings for vibration isolation of buildings) |
| BS 6178-1-1990 |
小梁掛鉤.第1部分:砌筑墻內的家用設施小梁掛鉤規范 |
(Joist hangers - Specification for joist hangers for building into masonry walls of domestic dwellings) |
| BS 6179-1982 |
一般用鎢絲燈(壽命2000小時) |
(Specification for tungsten filament lamps for general service (with lives of 2000 h)) |
| BS 6180-1999 |
建筑物內及附近用防護柵欄.實施規范 |
(Barriers in and about buildings - Code of practice) |
| BS 6181-1981 |
建筑物內接合部的透氣性的試驗方法 |
(Method of test for air permeability of joints in building) |
| BS 6182-1-1994 |
煤礦中使用的固有安全電源.第1部分:直流電源規范 |
(Intriniscally safe power supplies for use in coal mines - Specification for d.c. power supplies) |
| BS 6182-2-1982 |
煤礦中使用的固有安全電源.第2部分:交流電源規范 |
(Intrinsically safe power supplies for use in coal mines - Specification for a.c. power supplies) |
| BS 6182-3-1982 |
煤礦中使用的固有安全電源.第3部分:可再充電的蓄電池組規范 |
(Intrinsically safe power supplies for use in coal mines - Specification for rechargeable battery units) |
| BS 6183-1-2000 |
打板球者的防護設備.一般要求 |
(Protective equipment for cricketers - General requirements) |
| BS 6183-2-2000 |
打板球者的防護設備.生殖器防護裝置 |
(Protective equipment for cricketers - Genital protectors) |
| BS 6183-3-2000 |
打板球者的防護設備.擊球員、捕手和守場員的腿保護裝置及擊球員的大腿、臂和胸腔保護裝置 |
(Protective equipment for cricketers - Leg protectors for batsmen, wicket-keepers and fielders, and thigh, arm and chest protectors for batsmen) |
| BS 6183-4-2001 |
板球者的防護設備.打球手套 |
(Protective equipment for cricketers - Gloves for batsmen) |
| BS 6184-1981 |
儀器變壓器中部分放電的測量方法 |
(Method for measuring partial discharges in instrument transformers) |
| BS 6185-1982 |
男裝尺寸標記規范 |
(Specification for size designation of men’s wear) |
| BS 6186-1 Addendum No. 1-1993 |
直筒形漸開線花鍵規范:米制模數,側配合.檢驗 |
(Specification for straight cylindrical involute splines: metric module, side fit - Inspection) |
| BS 6186-1-1981 |
直筒形漸開線花鍵規范:米制模數、側配合.尺寸和公差 |
(Specification for straight cylindrical involute splines: metric module, side fit - Dimensions and tolerances) |
| BS 6187-2000 |
建筑物拆除實施規程 |
(Code of practice for demolition) |
| BS 6189-1989 |
有關織物、纖維、紗線及工藝的術語詞匯 |
(Glossary of terms relating to fabrics and associated fibres, yarns and processes) |
| BS 6191-1-1981 |
郵件處理機械.第1部分:信件開封機的術語詞匯 |
(Mail processing machines. Glossary of terms for letter opening machines) |
| BS 6191-2-1981 |
郵件處理機械.第2部分:信件折疊機的術語詞匯 |
(Mail processing machines. Glossary of terms for letter folding machines) |
| BS 6191-3-1982 |
郵件處理機械.第3部分:姓名地址印寫機術語詞匯 |
(Mail processing machines. Glossary of terms for addressing machines) |
| BS 6191-4-1984 |
郵件處理機械.第4部分:郵資蓋銷機技術規格中應包含的最起碼內容 |
(Mail processing machines. Specification for minimum information to be included in specification sheets of postal franking machines) |
| BS 6191-5-1985 |
郵件處理機械.第5部分:文件輸入機的術語詞匯 |
(Mail processing machines. Glossary of terms for document inserting machines) |
| BS 6195-1993 |
線圈引接用絕緣軟電纜及軟線規范 |
(Specification for insulated flexible cables and cords for coil leads) |
| BS 6196-1989 |
一次性使用的無菌硬膜外導管及導引器針頭規范 |
(Specification for sterile epidural catheters and introducer needles for single use) |
| BS 6197-1985 |
土方機械的保養與存放的方法 |
(Methods for preservation and storage of earth-moving machinery) |
| BS 6199-1.2-1991 |
用稱重及體積法測定密封管道中流體流量的方法.第1部分:稱重法.第2節:檢驗靜態稱重裝置的規程 |
(Measurement of liquid flow in closed conduits using weighing and volumetric methods - Weighing method - Procedures for checking static weighing systems) |
| BS 6200-1-1991 |
鐵、鋼和其他黑色金屬的抽樣與分析法.第1部分:前言和目錄 |
(Sampling and analysis of iron, steel and other ferrous metals - Introduction and contents) |
| BS 6200-2.1-1993 |
鐵、鋼和其他黑色金屬的抽樣與分析法.第2部分:抽樣和樣品的制備.第1節:鐵和鋼的抽樣和樣品制備法 |
(Sampling and analysis of iron, steel and other ferrous metals - Sampling and sample preparation - Methods for iron and steel) |
| BS 6200-2.2-1993 |
鐵、鋼和其它黑色金屬的取樣分析.第2部分:取樣和樣品制備.第2節:鐵合金和其它合金添加劑用方法 |
(Sampling and analysis of iron, steel and other ferrous metals - Sampling and sample preparation - Methods for ferroalloys and other alloying additives) |
| BS 6200-3.0-2002 |
鐵、鋼和其他有色金屬的抽樣和分析.分析方法.分析的參照方法.方法概述 |
(Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Reference methods of analysis - Summary of methods) |
| BS 6200-3.1.1-1991 |
鐵、鋼和其他鐵金屬的抽樣和分析.分析方法.鋁的測定.鋼、鑄鐵、低碳鉻鐵和鉻金屬:體積法 |
(Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Steel, cast iron, low carbon ferro-chromium and chromium metal: volumetric method) |
| BS 6200-3.1.2-1991 |
鐵、鋼和其他鐵金屬抽樣和分析.分析方法.鋁的測定.鋼和鑄鐵:分光光度分析法 |
(Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Steel and cast iron: spectrophotometric method) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com