標準號 |
中文名稱 |
英文名稱 |
| BS 5517-1977 |
銑床用米制長刀桿及附件尺寸規范 |
(Specification for dimensions of metric long arbors and their accessories for milling machines) |
| BS 5518-1977 |
鎢絲燈用電子可調控制開關(減光器開關)規范 |
(Specification for electronic variable control switches (dimmer switches) for tungsten filament lighting) |
| BS 5519-1-1977 |
辦公機械與數據處理設備用色帶和卷軸.打印色帶盒上顯示最小量的標記 |
(Ribbons and spools used on office machines and data processing equipment. Minimum markings to appear on containers of printing ribbons) |
| BS 5519-2-1982 |
辦公機械與數據處理設備用色帶和卷軸規范.第2部分:寬度小于19mm的卷軸上用的織物打印帶的寬度規范 |
Ribbons and spools used on office machines and data processing equipment. Specification for widths of fabric printing ribbons on spools up to 19 mm wide |
| BS 5519-3-1977 |
辦公機械與數據處理設備用色帶和卷軸.寬度小于19mm的一次性紙質或塑料打印帶的寬度與打印帶末端的標記 |
(Ribbons and spools used on office machines and data processing equipment. Widths of one-time paper or plastic printing ribbons up to 19 mm wide and marking to indicate the end of the ribbons) |
| BS 5519-4-1977 |
辦公機械與數據處理設備用色帶和卷軸.紙質或塑料打印色帶盤心的特性 |
(Ribbons and spools used on office machines and data processing equipment. Characteristics of cores for paper or plastic printing ribbons) |
| BS 5519-5-1977 |
辦公機械與數據處理設備用色帶和卷軸規范.第5部分:寬度超過19mm的卷軸上織物打印色帶寬度推薦規范 |
(Ribbons and spools used on office machines and data processing equipment. Recommendations for widths of fabric printing ribbons on spools exceeding 19 mm wide) |
| BS 552-1970 |
乙酸戊酯規范 |
(Specification for amyl acetate) |
| BS 5520-1977 |
上釉陶瓷缽狀(無緣式)小便池規范 |
(Specification for vitreous china bowl urinals (rimless type)) |
| BS 5522-1977 |
乳與乳制品規范脂肪含量的測定.莫瓊尼爾型脂肪萃取瓶 |
(Specification for milk and milk products - determination of fat content - Mojonnier-type fat extraction flasks) |
| BS 5523-1977 |
紡織品的術語詞匯.織紋.一般術語與基本織紋的定義 |
(Glossary of terms for textiles - weaves - definitions of general terms and basic weaves) |
| BS 5525-1977 |
地圖與設計圖的35mm縮微復制品規范 |
(Specification for 35 mm microcopying of maps and plans) |
| BS 5528-1981 |
土方工程用挖掘機駕駛員的控制設備規范 |
(Specification for operator’s controls on excavators used for earth-moving) |
| BS 5529-1988 |
工業用低壓開關設備和控制裝置規范.A型、直流用、3或4個接頭的近距離電感開關 |
(Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form A, for direct current, 3 or 4 terminals) |
| BS 553-1990 |
工業用乙酸乙酯規范 |
(Specification for ethyl acetate for industrial use) |
| BS 5531-1988 |
安裝構架安全實用規程 |
(Code of practice for safety in erecting structural frames) |
| BS 5534-2003 |
石板瓦和蓋瓦(包括木瓦)的實用規程 |
(Code of practice for slating and tiling (including shingles)) |
| BS 5535-1977 |
直角板料與箱角板料規范 |
(Specification for right angle and box angle plates) |
| BS 5536-1988 |
技術制圖縮微膠片的制作推薦規范 |
(Recommendations for preparation of technical drawings for microfilming) |
| BS 5537-1991 |
設計圖紙和配置圖格式指南 |
(Guide to forms design sheet and layout chart) |
| BS 5540-1-1978 |
評定液壓油粒狀污染規范.第1部分:樣品容器清潔方法的鑒定與檢驗 |
(Specification for evaluating particulate contamination of hydraulic fluids - Qualifying and controlling of cleaning methods for sample containers) |
| BS 5540-3-1978 |
評定液壓油粒狀污染規范.第3部分:瓶裝流體取樣方法 |
(Specification for evaluating particulate contamination of hydraulic fluids - Methods of bottling fluid samples) |
| BS 5540-6-1990 |
流體粒狀污染的評定.第6部分:液體用自動粒子計數器的校準方法(使用單一尺寸的膠乳球) |
(Evaluating particulate contamination of hydraulic fluids - Method of calibrating liquid automatic particle-count instruments (using mono-sized latex spheres)) |
| BS 5540-7-1991 |
液壓液粒子污染的評定.污染級的測定方法(重量分析法) |
(Evaluating particulate contamination of hydraulic fluids - Method of determining the level of contamination (by the gravimetric method)) |
| BS 5541-1978 |
液體閃爍計數瓶的尺寸規范 |
(Specification for dimensions of vials for liquid scintillation counting) |
| BS 5542-1978 |
放射性測量用環境或塑料試管尺寸規范 |
(Specification for dimensions of test tubes made of glass or plastics for radioactivity measurements) |
| BS 5543-1978 |
真空技術-圖形符號 |
(Vacuum technology - graphical symbols) |
| BS 5544-1978 |
防盜窗用玻璃(抗手擊窗用玻璃)規范 |
(Specification for anti-bandit glazing (glazing resistant to manual attack)) |
| BS 5546-2000 |
額定輸入不超過70kW的家用燃氣供熱水裝置規范 |
(Specification for installation of hot water supplies for domestic purposes, using gas-fired appliances of rated input not exceeding 70 kW) |
| BS 5547-1978 |
輕便式鉆孔記錄裝置(鉆孔深度至300m)規范:一般特性 |
(Specification for portable bore-hole logging equipment (down to 300 m): general characteristics) |
| BS 5548-1978 |
核反應堆測試儀器與防護用輻射探測器規范:性能與試驗方法 |
(Specification for radiation detectors for the instrumentation and protection of nuclear reactors: characteristics and test methods) |
| BS 5549-1978 |
(核電子裝置用)根據 NIM標準制作的模數插入式件與標準式19in機架裝置規范 |
(Specification for modular plug-in unit and standard 19-inch rack mounting unit based on NIM standard (for electronic nuclear instruments)) |
| BS 5550-1.11.1-1979 |
電影攝影技術.8mm膠片.心軸.8mm S型電影放映機卷軸用心軸尺寸規范 |
(Cinematography - 8 mm film - Spindles - Specification for dimensions of spindles for 8mm Type S motion-picture projector spools) |
| BS 5550-1.2.1-1978 |
電影攝影技術.第1部分:8mm膠片.第2節:畫面面積.第1小節:攝影機片窗形成畫面面積與最大放映畫面面積的位置與 |
(Cinematography - 8 mm film - Image areas - Specification for positions and dimensions of the image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture fil) |
| BS 5550-1.3.1-1978 |
電影攝影技術.8mm膠片.攝影機用法.8mm R型電影膠片在攝影機中的使用規范 |
(Cinematography - 8 mm film - Camera usage - Specification for camera usage of 8 mm type R motion-picture film) |
| BS 5550-1.3.3-1964 |
電影攝影技術.8mm膠片.攝影機用法.8mm R型攝影裝片機構的抓片爪到片門間距離規范 |
(Cinematography - 8 mm film - Camera usage - Specification for claw-to-gate distance in 8 mm Type R spool-loading cinematograph equipment) |
| BS 5550-1.4.3-1978 |
電影攝影技術.8mm膠片.聲音.帶有畫面的8mm 膠片錄音磁道位置和寬度以及磁錄音和錄放磁頭間隙規范 |
(Cinematography - 8 mm film - Sound - Specification for location and width of magnetic striping and gaps of recording and reproducing heads for magnetic sound record on 8 mm motion-picture film with pi) |
| BS 5550-1.4.5-1980 |
電影攝影技術.8mm膠片.聲音.8mm S型膠片照相錄音位置和寬度尺寸規范 |
(Cinematography - 8 mm film - Sound - Specification for position and width dimensions of photographic sound record on 8 mm Type S motion-picture prints) |
| BS 5550-1.4.6-1982 |
電影攝影技術.8mm膠片.聲音.打過排孔8mm S型孔的8mmS型電影膠片和完全涂磁膜磁錄音錄制特性規范 |
(Cinematography - 8 mm film - Sound - Specification for recorded characteristics for magnetic sound record on 8 mm Type S motion-picture prints and full-coat magnetic film perforated 8 mm Type S) |
| BS 5550-1.6.1-1978 |
電影攝影技術.8mm膠片.接片.放映機用8mm S型膠片的粘接或熱接尺寸規范 |
(Cinematography - 8 mm film - Splices - Specification for the dimensions of cemented or welded splices on 8 mm Type S motion-picture film for projector use) |
| BS 5550-2.11.1-1978 |
電影攝影技術.16mm膠片.心軸.16mm電影攝影機心軸與放映機盤心軸的尺寸規范 |
(Cinematography - 16 mm film - Spindles - Specification for dimensions of spindles for 16 mm motion-picture camera and projector spools) |
| BS 5550-2.11.2-1970 |
電影攝影技術.16mm膠片.心軸.16mm電影攝影設備和電視電影機用精密心軸規范 |
(Cinematography - 16 mm film - Spindles - Specification for dimensions of precision grade spindles for 16 mm cinematograph equipment and telecine machines) |
| BS 5550-2.12.1-1993 |
電影攝影技術.16mm膠片.雜項.評定16mm電影放映機畫面性能用試驗?zāi)z片的規范 |
(Cinematography - 16 mm film - Miscellaneous - Specification for test film for assessing the picture performance of 16 mm motion-picture projectors) |
| BS 5550-2.2.1-1978 |
電影攝影技術.第2部分:16mm膠片.第2節:畫面面積.第1小節:通過16mm膠片攝影機片窗成象的位置與尺寸規范 |
(Cinematography - 16 mm film - Image areas - Specification for position and dimensions of the image produced by 16 mm motion-picture camera aperture) |
| BS 5550-2.2.3-1980 |
電影攝影技術.16mm膠片.畫面面積.在16mm 電影發行的拷貝上畫面面積和攝影錄音的位置和尺寸規范 |
(Cinematography - 16 mm film - Image areas - Specification for positions and dimensions of picture image area and photographic sound record on 16 mm motion-picture release prints) |
| BS 5550-2.4.1-1978 |
電影攝影技術.16mm膠片.聲音.在16mm、35/16mm和35/32mm膠片的16mm負片攝影錄音的位置和尺寸規范 |
(Cinematography - 16 mm film - Sound - Specification for positions and dimensions of 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film) |
| BS 5550-2.4.3-1986 |
電影攝影技術.第2部分:16mm膠片.第4節:音響.第3小節:16mm膠片磁錄音錄制特性規范 |
(Cinematography - 16 mm film - Sound - Specification for the recorded characteristic for magnetic round records on 16 mm motion-picture film) |
| BS 5550-2.4.4-1980 |
電影攝影技術.16mm膠片.聲音.單排孔(I型)的16mm 電影膠片錄音磁道與磁錄音頭間隙的位置和寬度尺寸規范 |
(Cinematography - 16 mm film - Sound - Specification for positions and width dimensions of recording head gaps for two sound records on 16 mm magnetic film) |
| BS 5550-2.7.2-1982 |
電影攝影技術.第2部分:16mm膠片.第7節:放映.第2小節:16mm有聲影片放映機性能 |
(Cinematography - 16 mm film - Projection - Specification for the performance of 16 mm sound-film projectors) |
| BS 5550-2.9.1-1978 |
電影攝影技術.第2部分:16mm膠片.第9節:放映機片盤.第1小節:16mm電影放映用卷盤的尺寸(容量小于和等于120m:1 |
(Cinematography - 16 mm film - Projector spools - Specification for dimensions of spools for 16 mm motion-picture projectors (up to and including 120 m capacity: 18 cm size)) |
| BS 5550-2.9.2-1960 |
電影攝影技術.第2部分:16mm膠片.第9節:放映機片盤.第2小節:16mm電影放映機用卷盤(容量244m-610m:24-38cm尺 |
(Cinematography - 16 mm film - Projector spools - Specification for spools for 16 mm motion-picture projectors (from 244 m to 610 m capacity: 24 cm to 38 cm size)) |
| BS 5550-2.9.3-1964 |
電影攝影技術.第2部分:16mm膠片.第9節:放映機片盤.第3小節:專用設備用732m容量(43cm尺寸)的16mm膠片卷盤規 |
(Cinematography - 16 mm film - Projector spools - Specification for 16 mm film spools of 732 m capacity (43 cm size) for specialized equipment) |
| BS 5550-3.1.2-1978 |
電影攝影技術.35mm膠片.生片.35mm膠片放映畫面面積規范 |
(Cinematography - 35 mm film - Raw stock - Specification for the dimensional features of magnetic coatings on 35 mm perforated film) |
| BS 5550-3.10.2-1965 |
電影攝影技術.第3部分:35mm膠片.第10節:輸片齒輪.第2小節:35mm打孔膠片用通用輸片齒輪規范 |
(Cinematography - 35 mm film - Sprockets - Specification for universal sprockets for 35 mm perforated film) |
| BS 5550-3.4.8-1986 |
電影攝影技術.第3部分:35mm膠片.第4節:音響.第8小節:35mm膠片上二聲道錄音的側面位置和寬度尺寸規范 |
(Cinematography - 35 mm film - Sound - Specification for the lateral positions and width dimensions of two-track negative photographic sound records on 35 mm motion-picture film) |
| BS 5550-3.4.9-1987 |
電影攝影技術.第3部分:35mm膠片.第4節:音響.第9小節:35mm電影正片音響用A鏈頻率響應重放特性規范 |
(Cinematography - 35 mm film - Sound - Specification for reproduction characteristics of the A-chain frequency response for 35 mm photographic sound) |
| BS 5550-4.2.1-1980 |
電影攝影技術.第4部分:65mm和70mm膠片.第2節:畫面面積.第1小節:70mm拷貝片通過65mm和70mm電影攝影機片窗所 |
(Cinematography - 65 mm and 70 mm film - Image areas - Specification for positions and dimensions of image area produced by 65 mm and 70 mm motion-picture camera aperture and maximum projectable image) |
| BS 5550-4.4.1-1992 |
電影技術.60mm和70mm膠片.聲音.在成條的70mm發行拷貝上的六聲跡磁性聲帶 |
(Cinematography - 65 mm and 70 mm film - Sound - Specification for the location and dimensions of six-track magnetic sound records on 70 mm motion-picture release prints with magnetic stripes) |
| BS 5550-5.1.2-1993 |
電影攝影技術.多種膠片寬度的通用部分.生膠片.電影生膠片和磁性膠片用片盒標簽的最低信息規范 |
(Cinematography - Common to more than one film gauge - Raw stock - Specification for the minimum information for the labelling of containers for raw stock motion-picture films and magnetic films) |
| BS 5550-5.4.1-1986 |
電影攝影技術.第5部分:多種膠片寬度的通用部分.第4節:聲音.第1小節:未打孔聲帶與電影膠片和錄像帶同步用系 |
(Cinematography - Common to more than one gauge - Sound - Code of Practice for the identification of systems for synchronization of unperforated audio tape with motion-picture film and videotape) |
| BS 5550-5.4.3-1987 |
電影攝影技術.第5部分:多種膠片寬度的通用部分.第4節:聲音.第3小節:無圖象的35mm和單軌17.5mm膠片上三、四 |
() |
| BS 5550-5.4.6-1988 |
電影攝影技術.第5部分:多種膠片寬度的通用部分.第4節:聲音.第6小節:在8mm S型、16mm、35mm可變面攝影錄音的 |
(Cinematography - Common to more than one film gauge - Sound - Method for measurement of the signal to noise ratio of 8 mm type, 16 mm and 35 mm variable area photographic sound records) |
| BS 5550-5.5.1-1978 |
電影攝影技術.多種膠片寬度的通用部分.印片.膠片畫面放大和縮小的光學印片比率規范 |
(Cinematography - Common to more than one film gauge - Printing - Specification for optical printing ratios for enlargement and reduction of motion-picture film images) |
| BS 5550-6.1-1978 |
電影攝影技術.電視使用.國際電視節目交換用電影拷貝和錄音 |
(Cinematography - Television usage - Specification for motion-picture prints and sound records for international exchange of television programmes) |
| BS 5550-6.5-1984 |
電影攝影技術.電視使用.評價電視用影片和幻燈片的觀看條件的顏色、亮度和尺寸規范 |
(Cinematography - Television usage - Specification for the colours, luminances and dimensions for viewing conditions for the evaluation of films and slides for television) |
| BS 5550-7.2.6-1991 |
電影技術.制作和展示.在室內電影院放映電影膠片的銀幕亮度和顏色規范 |
(Cinematography - Production and presentation - Screens and screen luminance - Specification for screen luminance and colour for the projection of motion-picture prints in indoor theatres and review ro) |
| BS 5550-7.4.1-1990 |
電影攝影技術.第7部分:制片與放映.第4節:聲音.第1小節:電影控制電影放映室B型卷片的電聲響應的聲音測量和規 |
(Cinematography - Production and presentation - Sound - Specifications and measurements for the B-chain electro-acoustic response of motion-picture control rooms and indoor theatres) |
| BS 5550-7.4.2-2000 |
電影攝影技術.制片與放映.聲音.廣告和片尾的最大錄音水平規范 |
(Cinematography - Production and presentation - Sound - Specification for maximum recording levels for commercials and trailers) |
| BS 5550-7.5.2-1981 |
電影攝影技術.第7部分:制片與放映.第5節:電影和電視場地照明.第2小節:現場照明電力配電裝置規范 |
(Cinematography - Production and presentation - Film and television location lighting - Specification for location lighting power distribution units) |
| BS 5550-7.5.3-1981 |
電影攝影技術.第7部分:制片與放映.第5節:電影和電視場地照明.第3小節:插接連接器規范 |
(Cinematography - Production and presentation - Film and television location lighting - Specification for plugs and socket connectors) |
| BS 5550-7.5.4-1981 |
電影攝影技術.制片與放映.電影和電視場地照明.單極高電流插頭和插座連接器規范 |
(Cinematography - Production and presentation - Film and television location lighting - Specification for single pole high current plugs and socket connectors) |
| BS 5550-9.4.1-1989 |
電影攝影技術.第9部分:17.5mm電影膠片.第4節:聲音.第1小節:17.5mm磁片上兩聲軌道錄音磁頭的隙縫位置和寬度 |
(Cinematography - 17.5 mm film - Sound - Specification for the positions and width dimensions of recording head gaps for two sound records on 17.5 mm magnetic film) |
| BS 5551-1.3-1984 |
肥料.術語和標簽.集裝箱(盒、桶等)的標記和標簽 |
(Fertilizers - Terminology and labelling - Specification for marking of containers (packages, drums, etc.) and labels) |
| BS 5551-2.1-1993 |
肥料.抽樣.固體肥料小批量樣品的抽樣方法 |
(Fertilizers - Sampling - Simple sampling method for small lots of solid fertilizer) |
| BS 5551-2.10-1993 |
肥料.抽樣.散裝固體肥料自動抽樣用機械設備性能的檢驗方法 |
(Fertilizers - Sampling - Method of checking the performance of mechanical devices for sampling of solid fertilizer moving in bulk) |
| BS 5551-2.2-1984 |
肥料.第2部分:取樣.第2節:取樣報告的表示方法 |
(Fertilizers - Sampling - Presentation of sampling reports) |
| BS 5551-2.3-1978 |
肥料.取樣.停(止輸送)帶(進行)取樣方法(參考法) |
(Fertilizers - Sampling - Sampling from a conveyor by stopping the belt [reference method]) |
| BS 5551-2.4-1983 |
肥料.取樣.最終取樣的實用規則 |
(Fertilizers - Sampling - Practical arrangements for final samples) |
| BS 5551-2.5-1989 |
肥料.第2部分:取樣.第5節:固體肥料樣品的減量方法 |
(Fertilizers - Sampling - Method for reduction of samples of solid fertilizers) |
| BS 5551-2.6-1992 |
肥料.第2部分:取樣.第6節:評價大批量交貨的固體肥料用抽樣計劃的推斷指南 |
(Fertilizers - Sampling - Guide to derivation of a sampling plan for the evalution of a large delivery of solid fertilizer) |
| BS 5551-2.7-1988 |
肥料.第2部分:取樣.第7節:作為全部樣品的固體肥料的最小重量的增加堆薦方法 |
(Fertilizers - Sampling - Recommendations for minimum mass of increment of a solid fertilizer to be taken to be representative of the total sampling unit) |
| BS 5551-2.8-1991 |
肥料.第2部分:取樣.第8節:化學物理分析用固體肥料試樣的制備方法 |
(Fertilizers - Sampling - Methods for preparation of samples of solid fertilizer for chemical and physical analysis) |
| BS 5551-2.9-1991 |
肥料.第2部分:取樣.第9節:大量供給的肥料評定用取樣方案 |
(Fertilizers - Sampling - Sampling plan for the evaluation of a large delivery of solid fertilizer) |
| BS 5551-3.3-1992 |
肥料.第3部分:物理性能.第3節:細粒肥料松密度(散裝)的測定方法 |
(Fertilizers. Physical properties. Method for determination of bulk density (loose) of fine-grained fertilizers) |
| BS 5551-3.4-1987 |
肥料.第3部分:物理性能.第4節:含高氮的、純硝酸銨肥料的存油的測定方法 |
(Fertilizers - Physical properties - Method for determination of oil retention of high nitrogen content, straight ammonium nitrate fertilizers) |
| BS 5551-4.1.1-1981 |
肥料.第4部分:化學分析.第1節:氮含量測定.第1小節:硝酸鹽基氮的硝酸氮重量測定方法 |
(Fertilizers - Chemical analysis - Determination of nitrogen - Nitron gravimetric method for determination of nitrate nitrogen) |
| BS 5551-4.1.2-1982 |
肥料.第4部分:化學分析.第1節:氮含量測定.第2小節:氨態氮的測定(蒸餾后滴定法) |
(Fertilizers - Chemical analysis - Determination of nitrogen - Determination of ammoniacal nitrogen, titrimetric method after distillation) |
| BS 5551-4.1.3-1986 |
肥料.第4部分:化學分析.第1節:氮含量測定.第3小節:全氮含量測定方法 |
(蒸餾后滴定法(Fertilizers - Chemical analysis - Determination of nitrogen - Method for determination of total nitrogen content (titrimetric method after distillation)) |
| BS 5551-4.1.4-1984 |
肥料.第4部分:化學分析.第1節:氮含量測定.第1小節:硝酸鹽基氮的硝酸氮重量測定方法 |
(Fertilizers - Chemical analysis - Determination of nitrogen - Method for determination of ammoniacal nitrogen content in the presence of other substances which release ammonia when treated with sodium) |
| BS 5551-4.1.5-1993 |
肥料.第4部分:化學分析.第1節:氮含量測定.第5小節:脲氮含量的測定方法(使用xanthydrol重量法) |
(Fertilizers - Chemical analysis - Determination of nitrogen - Method for determination of urea nitrogen content (gravimetric method using xanthydrol)) |
| BS 5551-4.2.1-1978 |
肥料.化學分析.磷的測定.水溶磷酸鹽的萃取 |
(Fertilizers - Chemical analysis - Determination of phosphorus - Extraction of water-soluble phosphates) |
| BS 5551-4.2.2-1987 |
肥料.第4部分:化學分析.第2節:磷的測定.第2小節:溶于無機酸中的磷肥的萃取 |
(Fertilizers - Chemical analysis - Determination of phosphorus - Extraction of phosphates soluble in mineral acids) |
| BS 5551-4.2.3-1987 |
肥料.第4部分:化學分析.第2節:磷的測定.第3小節:磷含量測定方法(喹啉二磷化鉬重量分析法) |
(Fertilizers - Chemical analysis - Determination of phosphorus - Method for determination of phosphorus content (quinoline molybdophosphate gravimetric method)) |
| BS 5551-4.3.1-1983 |
肥料.化學分析.鉀的測定.測定水溶鉀含量用試驗溶液的制備 |
(Fertilizers - Chemical analysis - Determination of potassium - Preparation of the test solution for determination of water-soluble potassium content) |
| BS 5551-4.3.2-1983 |
肥料.化學分析.鉀的測定.測定酸浴鉀含量用試驗溶液的制備 |
(Fertilizers - Chemical analysis - Determination of potassium - Preparation of the test solution for determination of acid-soluble potassium content) |
| BS 5551-4.3.3-1984 |
肥料.第4部分:化學分析.第3節:鉀的測定.第3小節:水溶鉀含量的測定方法(四苯基硼酸鉀重量法:參考法) |
(Fertilizers - Chemical analysis - Determination of potassium - Method for determination of water-soluble potassium content (potassium tetraphenylborate gravimetric method: reference method)) |
| BS 5551-4.3.4-1988 |
肥料.第4部分:化學分析.第3節:鉀的測定.第4分節:鉀含量的測定方法(滴定法) |
(Fertilizers - Chemical analysis - Determination of potassium - Method for determination of potassium content (titrimetric method)) |
| BS 5551-4.5-1993 |
肥料.第4部分:化學分析.第5節:固體肥料中無機酸可溶硫酸鹽含量的測定方法 |
(Fertilizers - Chemical analysis - Method for determination of mineral-acid-soluble sulfate content of solid fertilizers) |
| BS 5552-1978 |
在動力反應堆中測量中子注量率(通量)用堆芯測量儀 |
(Code of practice for in-core instrumentation for neutron fluence rate (flux) measurements in power reactors) |
| BS 5554-1978 |
數據處理模數儀器系統指南:CAMAC系統 |
(Guide to a modular instrumentation system for data handling; CAMAC system) |
| BS 5555-1993 |
國際制單位規范及其倍數和某些其它單位的使用建議 |
(Specification for SI units and recommendations for the use of their multiples and of certain other units) |
| BS 5557-1992 |
鋪地織物.詞匯 |
(Textile floor coverings - Vocabulary) |
| BS 5560-1978 |
辦公用機器-尋址器的行和字符容量規范 |
(Specification for office machines - line and character capacity of address masters) |
| BS 5561-1979 |
銅線卷軸規范 |
(Specification for spools for copper wire) |
| BS 5564-1978 |
移相電力電容器外部保護的高壓熔絲規范 |
(Specification for high-voltage fuses for the external protection of shunt power capacitors) |
| BS 5567-1978 |
帶塑料蓋的鍍錫皮容器口規范 |
(Specification for apertures in tinplate containers to receive plug-in plastics closures) |
| BS 5576-1998 |
野營帳篷、篷、拖車篷及大篷車車篷的安全特性規范 |
(Specification for fire safety features of camping tents, awnings, trailer tents and caravan awnings) |
| BS 5577-1999 |
非金屬手柄餐桌用刀叉餐具規范 |
Specification for table cutlery with non-metallic handles |
| BS 5578-2-1978 |
建筑結構-梯.第2部分:模數協調:梯和梯口的協調尺寸規范 |
Building construction - stairs - Modular co-ordination: specification for co-ordinating dimensions for stairs and stair openings |
| BS 558 & 564-1970 |
電鍍用鎳陽極、陽極鎳和鎳鹽規范 |
Specifications for nickel anodes, anode nickel and nickel salts for electroplating |
| BS 558 and 564-1970 |
電鍍用鎳陽極、陽極鎳和鎳鹽規范 |
Specifications for nickel anodes, anode nickel and nickel salts for electroplating |
| BS 5581-1978 |
工業用低壓開關設備和控制裝置規范.專用控制開關的接線端標記與識別號碼 |
(Specification for low voltage switchgear and controlgear for industrial use - Terminal marking and distinctive number for particular control switches) |
| BS 5582-1978 |
工業用低壓開關設備和控制裝置規范.專用接觸器輔助接點的接線端標記與識別號碼 |
(Specification for low voltage switchgear and controlgear for industrial use - Terminal marking and distinctive number for auxiliary contacts of particular contactors) |
| BS 5583-1978 |
工業用低壓開關設備和控制裝置規范.專用觸點繼電器用接線端標記與識別號碼和識別字母 |
(Specification for low voltage switchgear and controlgear for industrial use - Terminal marking, distinctive number and distinctive letter for particular contactor relays) |
| BS 5584-1978 |
工業用低壓開關設備和控制裝置規范.支承軌.設備快速安裝用35mm寬的凹頂軌 |
(Specification for low voltage switchgear and controlgear for industrial use - Mounting rails - Top hat rails 35 mm wide for snap-on mounting of equipment) |
| BS 5585-1978 |
工業用低壓開關設備和控制裝置規范.支承軌.設備快速安裝用75mm寬的凹頂軌 |
(Specification for low voltage switchgear and controlgear for industrial use - Mounting rails - Top hat rails 75 mm wide for snap-on mounting of equipment) |
| BS 5586-1-1978 |
感觀分析裝置.第1部分:品酒用玻璃杯 |
(Sensory analysis apparatus - Specification for wine-tasting glass) |
| BS 5587-1978 |
涂敷磨料-帶裝有法蘭和分離法蘭的薄片砂輪-標記和尺寸規范 |
(Specification for coated abrasives - flap wheels with incorporated flanges or separate flanges - designation and dimensions) |
| BS 5588 Pt.6-1991 |
建筑物設計、施工和使用中的防火措施.第6部分:組裝現場實用規程 |
(Fire precautions in the design, construction and use of buildings. Code of practice for places of assembly) |
| BS 5588 Pt.7-1997 |
建筑物設計、施工和使用中的防火措施.建筑物門廊合并實施規程 |
(Fire precautions in the design, construction and use of buildings. Code of practice for the incorporation of atria in buildings) |