標準號 |
中文名稱 |
英文名稱 |
| BS 6431-4.1-1986 |
地瓷磚和墻面瓷磚.第4部分:吸水率E大于6%、小于或等于10%的擠壓成型瓷磚規范.A11a類.第1節:一般產品規范 |
(Ceramic floor and wall tiles - Extruded ceramic tiles with a water absorption of 6%) |
| BS 6431-4.2-1986 |
地瓷磚和墻面瓷磚.第4部分:吸水率E大于6%、小于或等于10%的擠壓成型瓷磚規范.A16類.第2節:專用產品(法國和 |
(Ceramic floor and wall tiles - Extruded ceramic tiles with a water absorption of 6%) |
| BS 6431-5-1986 |
標準號： |
中文標題： |
| BS 6431-6-1984 |
地面瓷磚和墻面瓷磚.第6部分:低吸水率(E小于或等于3%)的粉壓成型瓷磚規范.B1類 |
(Ceramic floor and wall tiles - Specification for dust-pressed ceramic tiles with a low water absorption (E) |
| BS 6431-7-1986 |
地面瓷磚和墻面瓷磚 |
(Ceramic floor and wall tiles - Specification for dust-pressed ceramic tiles with a water absorption of 3%) |
| BS 6431-8-1986 |
地面瓷磚和墻面瓷磚 |
(Ceramic floor and wall tiles - Specification for dust-pressed ceramic tiles with a water absorption of 6%) |
| BS 6431-9-1984 |
標準號： |
中文標題： |
| BS 6433-1983 |
木工鋸齒的剖面術語和名稱 |
(Terminology and designation of the profile shape of woodworking saw teeth) |
| BS 6434-1984 |
BS 6065“成形耐火材料制品的取樣和驗收方法“ 的使用指南 |
(Guide to the use of BS 6065 ’Methods for sampling and acceptance testing of shaped refractory products’) |
| BS 6435-1984 |
變壓器與整流圈的高壓電纜的干燥端子防潮用未充填護套規范 |
(Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors) |
| BS 6436-1984 |
電纜箱或分電站連接用固定式配電變壓器規范 |
(Specification for ground mounted distribution transformers for cable box or unit substation connection) |
| BS 644-2003 |
木窗.工廠用各種類型組裝窗的規范 |
(Timber windows - Factory assembled windows of various types - Specification) |
| BS 6440-1999 |
殘疾人用動力升降臺.實施規程 |
(Powered lifting platforms for use by disabled persons - Code of practice) |
| BS 6441-1993 |
石油測量表規范 |
(Schedule for petroleum measurement tables) |
| BS 6442-1984 |
彈性環形密封圈(“O“形環)表面凹陷的極限規范 |
(Specification for limits of surface imperfections on elastomeric toroidal sealing rings (’O’-rings)) |
| BS 6444-1-1990 |
心血管外科植入物.第1部分:心臟瓣膜置換物試驗方法及其包裝與加標簽的要求 |
(Cardiovascular implants - Methods of test for heart valve substitutes and requirements for their packaging and labelling) |
| BS 6446-1997 |
木材和木質板制品膠合構件的制作規范 |
(Specification for manufacture of glued structural components of timber and wood based panels) |
| BS 6447-1984 |
輸出為電量的絕對壓力發送器與表壓發送器規范 |
(Specification for absolute and gauge pressure transmitters with electrical outputs) |
| BS 6448-1995 |
進氣口壓力最大為200巴和DN大于50的燃?xì)庥谜{(diào)節器規范 |
(Specification for gas appliance governors of DN greater than 50 and for inlet pressures up to 200 mbar) |
| BS 6449-2-1984 |
橡膠配合料.沉淀的含水二氧化硅.橡膠的物理性能的測定方法(包括試驗方法) |
(Rubber compounding ingredients: precipitated, hydrated silica - Method for determination of physical properties in rubber (including test recipe)) |
| BS 6450-1-1993 |
由公共電信話務員操作的與公共交換電話網連接的專用支線交換機.一般要求規范 |
(Private branch exchanges for connection to public switched telephone networks run by certain public telecommunications operators - Specification for general requirements) |
| BS 6450-2-1993 |
由公共電信話務員操縱的公共交換電話網連接的專用支線交換機.終端站作為整體對待的專用支線交換機規范 |
(Private branch exchanges for connection to public switched telephone networks run by certain public telecommunications operators - Specification for private branch exchanges with terminating stations) |
| BS 6450-3.1-1993 |
由某些公共電信操作員控制的與公共交換電話網連接的專用支線交換機.電用支線交換機直接撥號.第1節:與整體終 |
() |
| BS 6450-5.1-1993 |
由公共電信話務員操作的與公共交換電話網連接的專用支線交換機. 專用支線交換機設備.與終端站作為整體對待 |
(Private branch exchanges for connection to the British Telecommunications public switched telephone network - Facilities on private branch exchanges - Specification for facilities on private branch ex) |
| BS 6450-6.1-1993 |
由公共電信話務員操作的公共交換電話網連接用專用支線交換機.簡單呼叫路由方式(SCRM).第1節:終端站作為實體 |
() |
| BS 6450-7-1990 |
與英國通信網公共切換電話網連接的專用支線交換機.第7部分:進行型式批準中的專用支線支換機的使用中觀察程 |
(Private branch exchanges for connection to public switched telephone networks run by certain public telecommunication operators - Specification for the procedure for in-service observation of PBXs und) |
| BS 6451-1984 |
地面運輸用網和繩索織成的負荷限制裝置規范 |
(Specification for netting and fibre rope load restraint systems in surface transport) |
| BS 6452-1-1983 |
內部粉飾和干砌用的串珠.第1部分:鍍鋅鋼珠規范 |
(Beads for internal plastering and dry lining - Specification for galvanized steel beads) |
| BS 6453-1984 |
服裝用皮革性能規范 |
(Specification for performance of leathers for garments) |
| BS 6455-1984 |
軟性包裝材料中溶劑殘留成分的監測方法 |
(Method for monitoring the levels of residual solvents in flexible packaging materials) |
| BS 6456-1983 |
信封名詞詞匯 |
(Glossary of terms for correspondence envelopes) |
| BS 6457-1984 |
翻修用的石砌塊規范 |
(Specification for reconstructed stone masonry units) |
| BS 6458-2.1-1984 |
電工產品的火災危險試驗.試驗方法.熱燈絲試驗 |
(Fire hazard testing for electrotechnical products - Test methods - Glow-wire test) |
| BS 6458-2.3-1985 |
電工產品的火災危險試驗.試驗方法.與加熱器不良接點試驗 |
(Fire hazard testing for electrotechnical products - Test methods - Bad-connection test with heaters) |
| BS 6460-1-1983 |
測試實驗室的認可.第1部分:測試實驗室技術能力的一般要求規范 |
(Accreditation of testing laboratories - Specification of the general requirements for the technical competence of testing laboratories) |
| BS 6461-1-1984 |
燒固體燃料(含木柴和泥煤)的家用灶具的煙囪和煙道的安裝.第1部分:磚石砌筑煙囪和煙管實用規程 |
(Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat) - Code of practice for masonry chimneys and flue pipes) |
| BS 6462-1985 |
三角型玻璃窗扇風撐和正面固定的側楔緊固件機械性能規范 |
(Specification for mechanical performance of peg-type casement stays and face-fixed wedge-action fasteners) |
| BS 6463-101-1996 |
生石灰、熟石灰與天然碳酸鈣.試驗用試樣的制備方法 |
(Quicklime, hydrated lime and natural calcium carbonate - Methods for preparing samples for testing) |
| BS 6463-102-2001 |
生石灰、熟石灰與天然碳酸鈣.化學分析方法 |
(Quicklime, hydrated lime and natural calcium carbonate - Methods for chemical analysis) |
| BS 6463-103-1999 |
生石灰、熟石灰與天然碳酸鈣.物理試驗方法 |
(Quicklime, hydrated lime and natural calcium carbonate - Methods for physical testing) |
| BS 6464-1984 |
制煉廠用增強塑料管、配件和接頭規范 |
(Specification for reinforced plastics pipes, fittings and joints for process plants) |
| BS 6465-1-1995 |
衛生設備.第1部分:衛生設備的供應、選購與安裝規模實用規程 |
(Sanitary installations - Code of practice for scale of provision, selection and installation of sanitary appliances) |
| BS 6465-2-1996 |
衛生器具.衛生器具的空間要求實用規程 |
(Sanitary installations - Code of practice for space requirements for sanitary appliances) |
| BS 6466-1984 |
陶瓷纖維爐襯的設計和安裝實用規程 |
(Code of practice for design and installation of ceramic fibre furnace linings) |
| BS 6468-1984 |
深度千分尺規范 |
(Specification for depth micrometers) |
| BS 6469-98.1-1996 |
電纜的絕緣和護套材料.附加的調和無電試驗方法.TMPU護套的試驗 |
(Insulating and sheathing materials of electric cables - Additional harmonized non-electrical test methods - Test for TMPU sheath) |
| BS 6469-99.1-1992 |
電纜的絕緣和護套材料.第99部分:用于英國的試驗方法,但不規定在BS 6469 Pt.1 至 Pt.5中.第1節:非電子試驗 |
(Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811 or other Parts of BS 6469: Non-electrical tests) |
| BS 6469-99.2-1992 |
電纜的絕緣和護套材料.第99部分:用于英國的試驗方法,但不規定在BS EN 60811或BS 6469的其它部分中.第2節:電 |
(Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811 or other Parts of BS 6469: Electrical tests) |
| BS 6470-1984 |
絕緣油、油浸絕緣紙和絕緣層壓板中含水量的測定方法 |
(Method for determination of water in insulating oils, and in oil-impregnated paper and pressboard) |
| BS 6472-1992 |
建筑物中振動(頻率為1-80Hz)對人影響的評定指南 |
(Guide to evaluation of human exposure to vibration in buildings (1 Hz to 80 Hz)) |
| BS 6475-1984 |
處理機系統總線接口(歐洲總線Ａ)規范 |
(Specification for processor system bus interface (Eurobus A)) |
| BS 6476-1984 |
服裝質量指南和有關英國標準 |
(Guide to garment quality and relevant British Standards) |
| BS 6478-1984 |
圖書館與文獻工作的新書通報歸檔指南 |
(Guide to filing bibliographic information in libraries and documentation) |
| BS 648-1964 |
建筑材料重量一覽表 |
(Schedule of weights of building materials) |
| BS 6480-1988 |
額定電壓在33KV及以下的鉛與鉛合金護套電纜規范 |
(Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V) |
| BS 6481-1984 |
火焰淬火或感應淬火后鋼淬火有效深度的測定方法 |
(Method for determination of effective depth of hardening of steel after flame or induction hardening) |
| BS 6483-1-1984 |
化肥撒播器.第1部分:在實驗室和田間條件下使用性能的評價方法 |
(Fertilizer distributors - Methods of evaluating performance under laboratory and field conditions) |
| BS 6483-2-1985 |
化肥撒播器.第2部分:化肥直線撒播器的試驗方法 |
(Fertilizer distributors - Method of test for fertilizer distributors in lines) |
| BS 6485-1999 |
架空動力線用PVC覆蓋導體 |
(PVC-covered conductors for overhead power lines) |
| BS 6487-1984 |
螺拴、螺釘和雙頭螺栓的開口銷孔與保險孔 |
(Specification for split pin holes and wire holes in bolts, screws and studs) |
| BS 6490-1984 |
土方機械用防松螺栓頭的外形和尺寸(不包括螺紋尺寸)規范 |
(Specification for shapes and dimensions (excluding thread dimensions) of plough bolt heads for earth-moving machinery) |
| BS 6491 Pt.1-1984 |
工業機器的電感安全系統.第1部分:一般要求規范 |
(Electro-sensitive safety systems for industrial machines. Specification for general requirements) |
| BS 6491 Pt.2-1987 |
工業機器的電感安全系統.第2部分:特殊要求(包括光電傳感器)規范 |
(Electro-sensitive safety systems for industrial machines. Specification for particular requirements for an electro-sensitive safety system incorporating a photoelectric sensing unit(s)) |
| BS 6493-1.1-1984 |
半導體器件.分立器件.總則 |
(Semiconductor devices - Discrete devices - General) |
| BS 6493-1.3-1986 |
半導體器件.分立器件.信號(包括開關)和調節二極管推薦規范 |
(Semiconductor devices - Discrete devices - Recommendations for signal (including switching) and regulator diodes) |
| BS 6493-2.3-1987 |
半導體器件.集成電路.模擬集成電路推薦規范 |
(Semiconductor devices - Integrated circuits - Recommendations for analogue integrated circuits) |
| BS 6494-4-1989 |
液壓閥的安裝面.第4部分:03和05規格的四孔組件排氣閥、模數組閥和方向控制閥夾緊尺寸規范 |
(Hydraulic fluid power valve mounting surfaces - Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves) |
| BS 6496-1984 |
施加并焙固于鋁合金的擠壓材、板材和預成型材(外部建筑用)上的粉末有機涂層和帶有粉末有機涂層的鋁合金擠壓 |
() |
| BS 6497-1984 |
施加并焙固于熱浸鍍鋅的熱軋型鋼和預成型鋼(窗及其外部建筑用)的粉末有機涂層和帶有粉末有機涂層的鍍鋅型鋼 |
() |
| BS 6498-2002 |
可用于作證的縮微膠卷與其他縮微膠片的制備指南 |
(Guide to preparation of microfilm and other microforms that may be required as evidence) |
| BS 6499-1998 |
金屬容器的金屬螺旋頸口、蓋和內部密封規范 |
(Metal screw necks, screw caps and inner seals for metal containers - Specification) |
| BS 65-1991 |
只應用于地表水管道和配件的陶管、配件、導管和撓性機械接頭規范 |
(Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings) |
| BS 6500-2000 |
電纜.家庭,辦公室和類似環境的裝置和設備使用的額定電壓達300/500V的柔性電纜 |
(Electric cables - Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments) |
| BS 6501-1-2004 |
金屬軟管組件.波紋形軟管組件的構造和使用指南 |
|
| BS 6501-2-1991 |
撓性金屬軟管組件.第2部分:帶繞軟管和軟管組合件規范 |
(Flexible metallic hose assemblies - Specification for strip wound hoses and hose assemblies) |
| BS 6502-1984 |
使用β型 12.65mm(0.5in)磁帶的螺旋掃描卡式錄像帶系統規范 |
(Specification for helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type Beta format) |
| BS 6504-1984 |
紙、紙板吸水率的測定方法(克萊姆法) |
(Method for determination of water absorption of paper and board (Klemm method)) |
| BS 6508-1984 |
農業拖拉機和機具履帶寬度推薦規范 |
(Recommendations for track widths for agricultural tractors and machinery) |
| BS 6509-1984 |
農業拖拉機三點連桿機構的空隙區域規范 |
(Specification for clearance zone on implements for the three-point linkage to agricultural tractors) |
| BS 6510-1984 |
鋼窗、梁、窗臺板與門規范 |
(Specification for steel windows, sills, window boards and doors) |
| BS 6511-1984 |
工業用金屬篩板穿孔標志規范 |
(Specification for designation of perforations in industrial plate screens) |
| BS 6513-1-1984 |
敷設寬帶電纜的分布系統.第1部分:術語規范 |
(Wideband cabled distribution systems - Glossary of terms) |
| BS 6513-2-1984 |
敷設寬帶電纜的分布系統.第2部分:測量方法 |
(Wideband cabled distribution systems - Methods of measurement) |
| BS 6513-4-1984 |
寬譜帶電纜的分配系統.第4部分:逆向電視機性能要求規范 |
(Wideband cabled distribution systems - Specification for performance requirements, for upstream television) |
| BS 6513-5-1987 |
敷設寬帶電纜的分配系統.第5部分:單向和相互作用的數據維護的推薦規范 |
(Wideband cabled distribution systems - Recommendations for one-way and interactive data services) |
| BS 6515-1984 |
圬工用防潮聚乙烯層規范 |
(Specification for polyethylene damp-proof courses for masonry) |
| BS 6518-1984 |
工業用低壓開關設備和控制裝置規范.控制開關.位置開關42.5X80.尺寸和特性 |
(Specification for low voltage switchgear and controlgear for industrial use - Control switches - Position switches 42.5 x 80 - Dimensions and characteristics) |
| BS 6519-1984 |
工業用低壓開關設備與控制裝置規范.感應式近距離開關.連接的標示 |
(Specification for low voltage switchgear and controlgear for industrial use - Inductive proximity switches - Identifications of connections) |
| BS 6520-1984 |
工業用低壓開關設備和控制裝置規范.控制開關.位置開關35X55.尺寸性能 |
(Specification for low voltage switchgear and controlgear for industrial use - Control switches - Position switches 30 x 55 - Dimensions and characteristics) |
| BS 6521-1984 |
校準圓鋼鏈節起重鏈正常使用和維修導則 |
(Guide for proper use and maintenance of calibrated round steel link lifting chains) |
| BS 6522-1984 |
絕緣油的水飽和百分比的測定方法 |
(Methods for determination of percentage water saturation of insulating oil) |
| BS 6523-1984 |
實驗室用玻璃燒杯規范 |
(Specification for glass beakers for laboratory use) |
| BS 6524-1984 |
紡織織物表面電阻率的測定方法 |
(Method for determination of the surface resistivity of a textile fabric) |
| BS 6525-1984 |
液壓油系統的儲油器的設計與結構規范 |
(Specification for design and construction of reservoirs used in hydraulic fluid power systems) |
| BS 6526-1998 |
家用爐手套規范.試驗方法和要求 |
(Domestic oven gloves - Requirements and test methods) |
| BS 6528-1984 |
圓柱螺釘螺紋的術語詞匯 |
(Glossary of terms for cylindrical screw threads) |
| BS 6529-1984 |
審讀文獻、確定它們的主題及選定主題詞推薦規范 |
(Recommendations for examining documents, determining their subjects and selecting indexing terms) |
| BS 6533-1984 |
用濃無機酸腐蝕對鋼進行宏觀檢驗的指南 |
(Guide to macroscopic examination of steel by etching with strong mineral acids) |
| BS 6534-1984 |
錫涂料中鉛的定量測定方法 |
(Method for quantitative determination of lead in tin coatings) |
| BS 6537-1984 |
液壓設備用 U型接頭規范 |
(Specification for staple type connectors for hydraulic fluid power applications) |
| BS 6538-1-1985 |
紙、紙板的空氣磁導.第1部分:測定空氣磁導的一般方法:試驗的概述 |
(Air permeance of paper and board - Method for determination of air permeance: general aspects of testing) |
| BS 6538-2-1992 |
紙和紙板的透氣性.使用Bendtsen儀表測定透氣性的方法 |
(Air permeance of paper and board - Method for determination of air permeance using the Bendtsen apparatus) |
| BS 6538-3-1987 |
紙、紙板的空氣磁導.第3部分:使用格利(Guley)裝置測定空氣磁導的方法 |
(Air permeance of paper and board - Method for determination of air permeance using the Gurley apparatus) |
| BS 6542-1-1984 |
信息交換用軟盤盒的文件結構和標記.第1部分:信息交換用軟盤標記和文檔結構規范 |
(File structure and labelling of flexible disk cartridges for information interchange - Specification for sequential file allocation structure) |
| BS 6542-2-1988 |
信息交換用軟盤盒的文件結構和標記.第2部分:可變件分配結構規范 |
(File structure and labelling of flexible disk cartridges for information interchange - Specification for variable file allocation structure) |
| BS 6543-1985 |
建筑和土木工程中工業副產品和廢料利用指南 |
(Guide to use of industrial by-products and waste materials in building and civil engineering) |
| BS 6544-1984 |
土方機械推土機端鏟孔規范 |
(Specification for holes in dozer end bits for earth moving machinery) |
| BS 6548-2-1992 |
設備的可保養性.在設計階段對設備的可保養性研究指南 |
(Maintainability of equipment - Guide to maintainability studies during the design phase) |
| BS 6548-3-1992 |
設備的可保養性.可保養性、驗證和可保養性數據的選擇.分析與表達法的指南 |
(Maintainability of equipment - Guide to maintainability, verification and the collection, analysis and presentation of maintainability data) |
| BS 6548-4-1993 |
設備的維修性.第4部分:維護和維護支持計劃導則 |
(Maintainability of equipment - Guide to the planning of maintenance and maintenance support) |
| BS 6548-5-1995 |
設備維修性.第5部分:診斷試驗導則 |
(Maintainability of equipment - Guide to diagnostic testing) |
| BS 6548-6-1995 |
設備的可維護性.可維護性評定統計方法指南 |
(Maintainability of equipment - Guide to statistical methods in maintainability evaluation) |
| BS 6550-1985 |
播種、耕作、施用化肥和噴撒設備工作的寬度推薦規范 |
(Recommendation for working widths of equipment for sowing, planting, distributing fertilizers and spraying) |
| BS 6553-1984 |
變電器電路設備用高壓熔斷絲熔斷片的選擇導則 |
(Guide for selection of fuse links of high-voltage fuses for transformer circuit applications) |
| BS 6554-1-1984 |
通信和電子設備用變壓器和感應器的疊片.第1部分:尺寸、機械特性和電氣試驗規范 |
(Laminations for transformers and inductors for use in telecommunication and electronic equipment - Specification for dimensions, mechanical characteristics and electrical testing) |
| BS 6556-1-1985 |
煤礦用低速數字信號.第1部分:光耦合規范 |
(Low speed digital signals for use in coal mines - Specification for optical coupling) |
| BS 6556-2-1985 |
煤礦用低速數字信號.第2部分:變壓器耦合規范 |
(Low speed digital signals for use in coal mines - Specification for transformer coupling) |
| BS 6556-3-1985 |
煤礦用低速數字信號.第3部分:信息協議規范 |
(Low speed digital signals for use in coal mines - Specification for message protocols) |
| BS 6559-1985 |
導則.木材防腐劑的歐洲(或CEN)試驗方法文獻總論 |
(Guide - General introductory document on European (or CEN) methods of test for wood preservatives) |
| BS 6563-1985 |
使用帕克·印痕-surf儀測定紙和紙板粗糙度的方法 |
(Method for determination of the roughness of paper and board by the Parker Print-surf apparatus) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com