標準號 |
中文名稱 |
英文名稱 |
| BS ISO 5433-1999 |
皮革.濕鉻鞣革牛皮.規范 |
(Leather - Bovine wet blue - Specification) |
| BS ISO 5456-4-2001 |
技術制圖.投影法.中心投影 |
(Technical drawings - Projection methods - Central projection) |
| BS ISO 5459-2000 |
技術圖紙.幾何公差.幾何圖形公差的基準和基準系統 |
(Technical drawings - Geometrical tolerancing - Datums and datum-systems for geometrical tolerances) |
| BS ISO 5466-1997 |
攝影.已處理的安全攝影膠片.存放技術 |
(Photography - Processed safety photographic films - Storage practices) |
| BS ISO 5473-1997 |
橡膠或塑料涂覆織物.耐擠壓性測定 |
(Rubber or plastics-coated fabrics - Determination of crush resistance) |
| BS ISO 5483-2004 |
船舶和海上技術.油箱和水箱的排水設施 |
|
| BS ISO 5507-2002 |
油料種子、植物油和脂肪.命名 |
(Oilseeds, vegetable oils and fats - Nomenclature) |
| BS ISO 5530-4-2002 |
小麥面粉.生面團物理特性.使用氣泡儀測定流變性能 |
(Wheat flour (Triticum aestivum L.) - Physical characteristics of doughs - Determination of rheological properties using an alveograph) |
| BS ISO 5536-2003 |
乳脂品.水含量的測定.卡爾.費休法 |
Milk fat products - Determination of water content - Karl Fischer method |
| BS ISO 5538-2004 |
乳和乳制品.取樣.計數檢驗 |
|
| BS ISO 5548-2004 |
酪蛋白和酪蛋白酸鹽.乳糖含量的測定.光度法 |
|
| BS ISO 5593-1998 |
滾動軸承.詞匯 |
(Rolling bearings - Vocabulary) |
| BS ISO 5596-2000 |
液壓傳動.隔離式儲氣蓄能器.壓力、容積的范圍和特性量 |
(Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities) |
| BS ISO 5599-1-2001 |
氣壓液動.五通方向控制閥.不帶電連接器的安裝接口表面 |
(Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector) |
| BS ISO 5599-2-2001 |
氣壓液動.五通方向控制閥.任選電氣連接器的安裝接口面 |
Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector |
| BS ISO 5626-1994 |
紙.耐折彎性測定 |
Paper - Determination of folding endurance |
| BS ISO 5631-2001 |
紙和板.顏色的測定(C/2°).漫反射法 |
Paper and board - Determination of colour (C/2 ? - Diffuse reflectance method |
| BS ISO 5636-4-2005 |
紙和紙板.透氣性的測定(中等范圍).謝菲爾德方法 |
|
| BS ISO 5652-1990 |
信息技術.信息交換用9磁道、12.7mm(0.5in)寬磁帶.使用246字符/mm(6250字符/in)編碼字符集的格式和錄制 |
Information processing - 9-track, 12,7 mm (0.5 in) wide magnetic tape for information interchange - Format and recording, using group coding at 246 cpmm (6250 cpi) |
| BS ISO 5655-2001 |
攝影技術.工業X射線照相膠片和金屬增感屏.尺寸 |
Photography - Industrial radiographic films (roll and sheet) and metal intensifying screens - Dimensions |
| BS ISO 5658-2-1997 |
燃燒試驗.火焰?zhèn)鞑?第2部分:直立布局中建筑產品側面的火焰蔓延程度 |
Reaction to fire tests - Spread of flame - Lateral spread on building products in vertical configuration |
| BS ISO 5658-4-2001 |
燃燒試驗反應.火焰?zhèn)鞑?垂直定向樣品火焰垂直傳播的中型試驗 |
(Reaction to fire tests - Spread of flame - Intermediate-scale test of vertical spread of flame with vertically oriented specimen) |
| BS ISO 5667-17-2000 |
水質.取樣.懸浮沉淀物的取樣指南 |
Water quality - Sampling - Guidance on sampling of suspended sediments |
| BS ISO 5667-18-2001 |
水質.取樣.污染地區地下水取樣指南 |
Water quality - Sampling - Guidance on sampling of groundwater at contaminated sites |
| BS ISO 5681-2002 |
農作物保護設備.詞匯 |
Equipment for crop protection - Vocabulary |
| BS ISO 5687-2003 |
收割設備.聯合收割機.谷物箱容量和卸料裝置性能的測定和標注 |
Equipment for harvesting - Combine harvesters - Determination and designation of grain tank capacity and unloading device performance |
| BS ISO 5692-1-2004 |
農用車輛.拖掛車輛的機械連接裝置.掛接環的尺寸 |
|
| BS ISO 5707-1997 |
擠奶裝置.結構和性能 |
Milking machine installations - Construction and performance |
| BS ISO 5718-2002 |
收割機.農用旋轉式割草機刀片.要求 |
Harvesting equipment - Blades for agricultural rotary mowers - Requirements |
| BS ISO 5725-1-1995 |
測量方法和結果的精確性(精度和精確度).一般原則和定義 |
Accuracy (trueness and precision) of measurement methods and results - General principles and definitions |
| BS ISO 5725-2-1995 |
測量方法和結果的精確性(精度和精密度).標準測量方法的重復性和再現性測定的基本方法 |
Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of repeatability and reproducibility of a standard measurement method |
| BS ISO 5725-3-1995 |
測量方法和測量結果的精確性(精度和精密度).第3部分;標準測量方法的精密度的間歇性測量 |
Accuracy (trueness and precision) of measurement methods and results - Intermediate measures of the precision of a standard measurement method |
| BS ISO 5725-4-1995 |
測量方法和測量結果的精確性(精度和精密度).第4部分;標準測量方法的真實測定的基本方法 |
Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method |
| BS ISO 5725-5-1998 |
測量方法和結果的準確度.標準測量方法精度測定的迭代法 |
Accuracy (trueness and precision) of measurement methods and results - Alternative methods for the determination of the precision of a standard measurement method |
| BS ISO 5725-6-1995 |
測量方法和測量結果的精確性(精度和精密度).第6部分;準確值的實際應用 |
Accuracy (trueness and precision) of measurement methods and results - Use in practice of accuracy values |
| BS ISO 5738-2004 |
乳和乳制品.銅含量的測定.光度參照法 |
|
| BS ISO 5739-2003 |
酪蛋白和酪蛋白酸鹽.焦粒和外部物質含量的測定 |
Caseins and caseinates - Determination of contents of scorched particles and of extraneous matter |
| BS ISO 5742-2004 |
夾扭鉗和剪切鉗.術語 |
|
| BS ISO 5743-2004 |
夾扭鉗和剪切鉗.通用技術條件 |
|
| BS ISO 5744-2004 |
夾扭鉗和剪切鉗.試驗方法 |
|
| BS ISO 5745-2004 |
夾扭鉗和剪切鉗.夾扭鉗.尺寸和試驗值 |
|
| BS ISO 5746-2004 |
夾扭鉗和剪切鉗.鉗工鉗和電工鉗.尺寸和試驗值 |
|
| BS ISO 5748-2004 |
夾扭鉗和剪切鉗.頂切鉗.尺寸和試驗值 |
|
| BS ISO 5749-2004 |
夾扭鉗和剪切鉗.斜嘴鉗.尺寸和試驗值 |
|
| BS ISO 5751-1-2004 |
摩托車輪胎和輪輞(米制系列).設計指南 |
|
| BS ISO 5751-1-2004 |
摩托車輪胎和輪輞(米制系列).設計指南 |
|
| BS ISO 5751-3-2004 |
摩托車輪胎和輪輞(米制系列).配套輪輞輪廓范圍 |
|
| BS ISO 5751-3-2004 |
摩托車輪胎和輪輞(米制系列).配套輪輞輪廓范圍 |
|
| BS ISO 5758-2003 |
電影.供交換用影片及磁性(聲跡)素材.容器標簽的最低限內容 |
(Cinematography - Labelling of containers for motion-picture film and magnetic material - Minimum information for exchange of materials) |
| BS ISO 5765-1-2002 |
奶粉、干冰混合物和加工的奶酪.測定乳糖含量.利用乳糖中葡萄糖含量的酶催化方法 |
Dried milk, dried ice-mixes and processed cheese - Determination of lactose content - Enzymatic method utilizing the glucose moiety of the lactose |
| BS ISO 5765-2-2002 |
奶粉、干冰混合物和加工的奶酪.測定乳糖含量.利用乳糖中半乳糖含量的酶催化方法 |
Dried milk, dried ice-mixes and processed cheese - Determination of lactose content - Enzymatic method utilizing the galactose moiety of the lactose |
| BS ISO 5768-1999 |
電影技術.16mm電影膠片在W 型電影攝影機片窗上形成的影象.位置和尺寸 |
Cinematography - Image produced by camera aperture type W on 16 mm motion-picture film - Position and dimensions |
| BS ISO 5781-2000 |
液壓傳動.減壓閥、順序閥、卸荷閥、節流閥和止回閥.安裝面 |
Hydraulic fluid power - Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces |
| BS ISO 5782-1-1998 |
氣壓傳動.空氣壓縮過濾器.供貨商文件應包括的主要特性和產品標志要求 |
Pnuematic fluid power - Compressed air filters - Main characteristics to be included in supplier`s literature and product-marking requirements |
| BS ISO 5782-2-1998 |
氣壓傳動.空氣壓縮過濾器.測定包括在供貨商文件中的主要特性的試驗方法 |
Pnuematic fluid power - Compressed air filters - Test methods to determine the main characteristics to be included in supplier`s literature |
| BS ISO 5796-2000 |
橡膠配方配合劑.天然碳酸鈣.試驗方法 |
Rubber compounding ingredients - Natural calcium carbonate - Test methods |
| BS ISO 5797-2004 |
造船和海上技術.耐火結構的窗和側舷窗 |
|
| BS ISO 5797-2004 |
造船和海上技術.耐火結構的窗和側舷窗 |
|
| BS ISO 5799-1995 |
攝影技術.醫用和牙科用直接爆光射線攝影膠片/處理系統.ISO感光速度和ISO平均梯度的測定 |
Photography - Direct-exposing medical and dental radiographic film/process systems - Determination of ISO speed and ISO average gradient |
| BS ISO 5800-1995 |
攝影技術.靜物照相用彩色負片.ISO感光度的測定 |
Photography - Colour negative films for still photography - Determination of ISO speed |
| BS ISO 5805-1998 |
機械振動和沖擊.人體暴露.詞匯 |
Mechanical vibration and shock - Human exposure - Vocabulary |
| BS ISO 582-1995 |
滾動軸承.倒角尺寸.最大值 |
Rolling bearings - Chamfer dimensions - Maximum values |
| BS ISO 5832-2-1999 |
外科植入物.金屬材料.非合金鈦 |
Implants for surgery - Metallic materials - Unalloyed titanium |
| BS ISO 5833-2002 |
外科植入物.丙烯酸樹脂粘接劑 |
Implants for surgery - Acrylic resin cements |
| BS ISO 5834-1-1998 |
外科植入物.超高分子量聚乙烯.粉劑型 |
Implants for surgery - Ultra-high molecular weight polyethylene - Powder form |
| BS ISO 5834-2-1998 |
外科植入物.超高分子量聚乙烯.模塑成型 |
Implants for surgery - Ultra-high molecular weight polyethylene - Moulded forms |
| BS ISO 5834-4-2005 |
外科植入物.超高分子量聚乙烯.氧化指數測量法 |
|
| BS ISO 5841-2-2001 |
外科植入物.心臟起搏器.對使用脈搏發生器的人群的臨床實踐報告 |
Implants for surgery - Cardiac pacemakers - Reporting of clinical performance of populations of pulse generators or leads |
| BS ISO 5893-2002 |
橡膠和塑料的試驗設備.拉伸、彎曲和壓縮型.規范 |
Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification |
| BS ISO 5894-2000 |
船和造船技術.有螺栓緊固蓋的人孔 |
Ships and marine technology - Manholes with bolted covers |
| BS ISO 5912-2004 |
野營帳篷 |
|
| BS ISO 592-2001 |
香精油.旋光度的測定 |
Essential oils - Determination of optical rotation |
| BS ISO 5943-2004 |
干酪及融化干酪制品.氯化物含量的測定.電位滴定法 |
|
| BS ISO 5943-2004 |
干酪及融化干酪制品.氯化物含量的測定.電位滴定法 |
|
| BS ISO 5952-2005 |
增強耐大氣腐蝕結構級連續熱軋薄鋼板 |
|
| BS ISO 5952-2005 |
增強耐大氣腐蝕結構級連續熱軋薄鋼板 |
|
| BS ISO 5984-2003 |
動物飼料.粗灰分的測定 |
Animal feeding stuffs - Determination of crude ash |
| BS ISO 5985-2003 |
動物飼料.鹽酸不溶性灰分的測定 |
Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid |
| BS ISO 5989-1996 |
攝影技術.照相鹵化銀劑沖洗用預包裝化學藥品詞匯 |
Photography - Pre-packaged chemicals for the processing of silver halide based photographic materials - Vocabulary |
| BS ISO 5990-2002 |
照相.處理藥液.亞硫酸鉀650g/l水溶液規范 |
Photography - Processing chemicals - Specifications for potassium sulfite, 650 g/l solution |
| BS ISO 5991-2001 |
香精油.用減壓蒸餾法測定殘?jiān)?/td>
| Essential oils - Determination of residue content from distillation under reduced pressure |
| BS ISO 6-1995 |
攝影技術.黑白照相機負片/沖洗系統.ISO感光速度測定 |
Photography - Black-and-white pictorial still camera negative film/process systems - Determination of ISO speed |
| BS ISO 6020-1-1998 |
液壓傳動.16MPa(160bar)系列單桿液壓缸裝配尺寸.中型系列 |
Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Medium series |
| BS ISO 6020-2-1995 |
液壓傳動.單桿液壓缸裝配尺寸,16MPa系列.小型系列 |
Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series |
| BS ISO 6020-3-1995 |
液壓傳動.16MPa(160bar)系列單桿液壓缸用安裝尺寸.內徑從250mm到500mm的壓制系列 |
(Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series with bores from 250 mm to 500 mm) |
| BS ISO 6022-1997 |
液壓傳動.單桿液壓缸.裝配尺寸.250巴(25000kPa)系列 |
Hydraulic fluid power - Single rod cylinders - Mounting dimensions - 250 bar (25 000 kPa) series |
| BS ISO 6025-2001 |
電影攝影.35mm和16mm模擬攝影聲音試驗?zāi)z片.規范 |
Cinematography - Analogue photographic sound test films, 35 mm and 16mm - Specifications |
| BS ISO 603-1-1999 |
粘合磨料產品.尺寸.頂尖之間外圓磨削用砂輪 |
Bonded abrasive products - Dimensions - Grinding wheels for external cylindrical grinding between centres |
| BS ISO 603-10-1999 |
粘合磨料產品.尺寸.搪磨和超精整用磨石 |
Bonded abrasive products - Dimensions - Stones for honing and superfinishing |
| BS ISO 603-11-1999 |
粘合磨料產品.尺寸.手工精整油石 |
Bonded abrasive products - Dimensions - Hand finishing sticks |
| BS ISO 603-12-1999 |
粘合磨料產品.尺寸.在水平磨床上清理和整修毛刺用砂輪 |
Bonded abrasive products - Dimensions - Grinding wheels for deburring and fettling on a straight grinder |
| BS ISO 603-13-1999 |
粘合磨料產品.尺寸.在垂直磨床上清理和整修毛刺用砂輪 |
Bonded abrasive products - Dimensions - Grinding wheels for deburring and fettling on a vertical grinder |
| BS ISO 603-14-1999 |
粘合磨料產品.尺寸.在角形磨床上清理和整修毛刺用砂輪 |
Bonded abrasive products - Dimensions - Grinding wheels for deburring and fettling/snagging on an angle grinder |
| BS ISO 603-15-1999 |
粘合磨料產品.尺寸.固定或移動式切削機上的切削用砂輪 |
Bonded abrasive products - Dimensions - Grinding wheels for cutting-off on stationary or mobile cutting-off machines |
| BS ISO 603-16-1999 |
粘合磨料產品.尺寸.手持動力工具的切削用砂輪 |
Bonded abrasive products - Dimensions - Grinding wheels for cutting-off on hand-held power tools |
| BS ISO 603-2-1999 |
粘合的磨料制品.尺寸.無頂尖的外圓磨削用砂輪 |
Bonded abrasive products - Dimensions - Grinding wheels for centreless external cylindrical grinding |
| BS ISO 603-3-1999 |
粘合的磨料制品.尺寸.內圓磨削用砂輪 |
Bonded abrasive products - Dimensions - Grinding wheels for internal cylindrical grinding |
| BS ISO 603-4-1999 |
粘合磨料產品.尺寸.表面磨削/周邊磨削用砂輪 |
Bonded abrasive products - Dimensions - Grinding wheels for surface grinding/peripheral grinding |
| BS ISO 603-5-1999 |
粘合磨料產品.尺寸.表面/平面磨削用砂輪 |
Bonded abrasive products - Dimensions - Grinding wheels for surface grinding/face grinding |
| BS ISO 603-6-1999 |
粘合磨料產品.尺寸.工具和工具室磨削用砂輪 |
Bonded abrasive products - Dimensions - Grinding wheels for tool and toolroom grinding |
| BS ISO 603-7-1999 |
粘合磨料產品.尺寸.手工磨削用砂輪 |
Bonded abrasive products - Dimensions - Grinding wheels for manually guided grinding |
| BS ISO 603-8-1999 |
粘合磨料產品.尺寸.清除毛刺和修整用砂輪 |
Bonded abrasive products - Dimensions - Grinding wheels for deburring and fettling/snagging |
| BS ISO 603-9-1999 |
粘合磨料產品.尺寸.高壓磨削用砂輪 |
Bonded abrasive products - Dimensions - Grinding wheels for high pressure grinding |
| BS ISO 6036-1996 |
電影攝影.電視用彩色電影印刷品和幻燈片 |
Cinematography - Colour motion-picture prints and slides for television - Density specifications |
| BS ISO 6038-1995 |
電影技術.70mm,65mm,35mm和16mm電影膠片用的拼接接片.尺寸和位置 |
Cinematography - Splices for use on 70 mm, 65 mm, 35 mm and 16 mm motion-picture films - Dimensions and locations |
| BS ISO 6055-1997 |
高升程乘坐式運貨車.頂防護板.規范和試驗 |
High-lift rider trucks - Overhead guards - Specification and testing |
| BS ISO 6055-2004 |
工業用貨車.護頂架.規范和試驗 |
|
| BS ISO 6072-2002 |
液壓傳動.流體和標準合成橡膠材料間的兼容性 |
Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials |
| BS ISO 6073-1998 |
石油產品.液壓傳動系統用石油液體體積模量的預測 |
Petroleum products - Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems |
| BS ISO 6099-2001 |
液動系統和件.液壓缸.裝配尺寸和裝配類型的識別代碼 |
Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types |
| BS ISO 6104-2005 |
高強度磨料制品.金剛石或立方氮化硼旋轉磨削工具.一般評述、名稱和多種語言術語 |
|
| BS ISO 6105-1-2004 |
超級研磨切斷砂輪用坯件.建筑和土木工程用人工切割 |
|
| BS ISO 6105-2-2004 |
超級研磨切斷砂輪用坯件.建筑和土木工程用手持式切割 |
|
| BS ISO 6107-1-2004 |
水質.詞匯.第1部分 |
|
| BS ISO 6107-3-1993 |
水質量.詞匯.第3部分 |
Water quality - Vocabulary - Part 3 |
| BS ISO 6107-5-2004 |
水質.詞匯.第5部分 |
|
| BS ISO 6107-6-2004 |
水質.詞匯.第6部分 |
|
| BS ISO 6107-8-1993 |
水質量.詞匯.第8部分 |
Water quality - Vocabulary - Part 8 |
| BS ISO 611-2003 |
道路車輛.機動車輛及其拖車的制動.詞匯 |
(Road vehicles - Braking of automotive vehicles and their trailers - Vocabulary) |
| BS ISO 6133-1998 |
橡膠和塑料.測定撕裂強度和粘合強度時獲得的多峰值曲線的分析 |
Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com