標準號 |
中文名稱 |
英文名稱 |
| BS EN 29945-1-1991 |
信息技術.便攜式操作系統接口(POSIX).系統應用程序接口.C語言 |
Information technology. Portable operating system interface (POSIX). System application program interface (API) [C LANGUAGE] |
| BS EN 2997-1-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.技術規范 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Technical specification) |
| BS EN 2997-10-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.插頭保護涂層.產品標準 |
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Protective cover for plug - Product standard |
| BS EN 2997-11-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.虛擬插座.產品標 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Dummy receptacle - Product) |
| BS EN 2997-2-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.性能規范和觸點排 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Specification of performanc) |
| BS EN 2997-3-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.方頭法蘭插座.產 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Square flange receptacle -) |
| BS EN 2997-4-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.防松螺母鑲嵌插座 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Jam-nut mounted receptacle) |
| BS EN 2997-5-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.密封方頭法蘭插座 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Hermetic square flange rece) |
| BS EN 2997-6-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.密封防松螺母鑲嵌插座.產品標準 |
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Hermetic jam-nut mounted receptacle - Product standard |
| BS EN 2997-7-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.軟焊或銅焊上圓頭 |
() |
| BS EN 2997-8-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.插頭.產品標準 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Plug - Product standard) |
| BS EN 2997-9-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.插座保護涂層.產 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Protective cover for recept) |
| BS EN 2998-1996 |
耐高溫鋼制鈍化平墊圈 |
(Washers, flat, in heat resisting steel, passivated) |
| BS EN 3-1-1996 |
輕便式滅火器.第1部分:A類和B類滅火試驗的操作描述和操作時間 |
(Portable fire extinguishers - Description, duration of operation, class A and B fire test) |
| BS EN 3-2-1996 |
輕便式滅火器.第2部分:壓實,介電試驗,填塞試驗,特別條款 |
(Portable fire extinguishers - Tightness, dielectric test, tamping test, special provisions) |
| BS EN 3-3-1996 |
輕便式滅火器.耐壓結構,機械試驗 |
(Portable fire extinguishers - Construction, resistance to pressure, mechanical tests) |
| BS EN 3-4-1996 |
輕便式滅火器.最低要求裝填料 |
(Portable fire extinguishers - Charges, minimum required fire) |
| BS EN 3-5-1996 |
輕便式滅火器.規范和補充試驗 |
(Portable fire extinguishers - Specification and supplementary tests) |
| BS EN 3-6-1996 |
輕便滅火器.根據EN 3第1-5部分輕便滅火器合格證明規定 |
(Portable fire extinguishers - Provisions for the attestation of conformity of portable fire extinguishers in accordance with EN 3 Part 1 to Part 5) |
| BS EN 3-7-2004 |
便攜式滅火器.特點、性能要求和試驗方法 |
|
| BS EN 30-1-1-1998 |
家用烹飪設備燃?xì)?安全.一般 |
Domestic cooking appliances burning gas - Safety - General |
| BS EN 30-1-2-1999 |
家用燃?xì)庠罹?安全.具有強制對流烘箱和/或烤架的用具 |
(Domestic cooking appliances burning gas - Safety - Appliances having forced-convection ovens and/or grills) |
| BS EN 30-1-3-2003 |
家用燃?xì)庠罹?安全.具有玻璃陶瓷熱板的器具 |
(Domestic cooking appliances burning gas - Safety - Appliances having a glass ceramic hotplate) |
| BS EN 30-1-4-2002 |
家用燃?xì)庠罹?安全.具有自動燃燒控制系統的一個或多個燃燒器的用具 |
Domestic cooking appliances burning gas - Safety - Appliances having one or more burners with an automatic burner control system |
| BS EN 30-2-1-1998 |
燃?xì)饧矣门腼冇镁?能量的合理利用.一般性 |
(Domestic cooking appliances burning gas - Rational use of energy - General) |
| BS EN 30-2-2-1999 |
家用燃?xì)庠罹?能量的合理利用.具有強制對流烘箱和/或烤架的用具 |
(Domestic cooking appliances burning gas - Rational use of energy - Appliances having forced-convection ovens and/or grills) |
| BS EN 300-1997 |
定向纖維板(OSB)的定義、分類和規范 |
(Oriented strand boards (OSB) - Definitions, classification and specifications) |
| BS EN 3004-1997 |
FE-PA2601(A286)耐熱鋼制MJ螺紋自鎖螺母.等級:1100 MPa(室溫)/650℃.技術規范 |
(Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa (at ambient temperature)/650℃ - Technical specification) |
| BS EN 30042-1994 |
鋁及其可焊合金電弧焊接頭.質量缺陷等級導則 |
(Arc-welded joints in aluminium and its weldable alloys - Guidance on quality levels for imperfections) |
| BS EN 3005-2005 |
航空航天系列.自鎖緊、MJ螺紋、NI-PH1302耐熱鎳基合金(沃斯帕洛尹合金)制鍍銀或不鍍銀螺母.等級:1210MPa (室溫)/730 鳦.技術規范 |
|
| BS EN 3005-2005 |
航空航天系列.自鎖緊、MJ螺紋、NI-PH1302耐熱鎳基合金(沃斯帕洛尹合金)制鍍銀或不鍍銀螺母.等級:1210MPa (室溫)/730 鳦.技術規范 |
|
| BS EN 3006-1994 |
FE-PA92HT(A286)耐熱鋼制薄柄長螺紋六角頭螺栓.等級:900 MPa(室溫)/650℃ |
(Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃) |
| BS EN 3007-1996 |
鍍銀FE-PA92HT(A286)耐熱鋼制薄柄長螺紋六角頭螺栓.等級:900 MPa(室溫)/650℃ |
(Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), Silver plated - Classification: 900 MPa (at ambient temperature)/650℃) |
| BS EN 3008-1998 |
耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)制薄柄長螺紋六角頭螺栓.等級:1275 MPa(室溫)/650℃ |
(Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650℃) |
| BS EN 3009-1998 |
鍍銀耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)制薄柄長螺紋六角頭螺栓.等級:1275 MPa(室溫)/650℃ |
(Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification - 1275 MPa (at ambient temperature)/650℃) |
| BS EN 301-1992 |
承重木結構用膠接酚醛塑料和氨基塑料:分類和性能要求 |
(Adhesives, phenolic and aminoplastic, for load-bearing timber structures: classification and performance requirements) |
| BS EN 3010-1998 |
耐熱鎳基合金NI-P101HT(沃斯帕洛尹合金)薄柄長螺紋六角頭螺栓.等級:1210 MPa(室溫)/730℃ |
(Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ℃) |
| BS EN 3011-1998 |
鍍銀耐熱鎳基合金NI-P101HT(沃斯帕洛尹合金)薄柄長螺紋六角頭螺栓.等級:1210 MPa(室溫)/730℃ |
(Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification:1210 MPa (at ambient temperature)/730 ℃) |
| BS EN 3012-1996 |
耐熱鎳基合金HI-P101HT(沃斯帕洛尹合金)制自鎖雙六角頭螺母.等級:1210 MPa(室溫)/730℃ |
Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 鳦 |
| BS EN 3013-1996 |
鍍銀耐熱鎳基合金HI-P101HT(沃斯帕洛尹合金)自鎖雙六角頭螺母.等級:1210 MPa(室溫)/730℃ |
(Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 ℃) |
| BS EN 30139-1-1992 |
牙科學.活動假牙用彈性襯料.第1部分:短期材料規范 |
Dentistry - Resilient lining materials for removable dentures - Specification for short-term materials |
| BS EN 3014-2001 |
航空航天系列.耐熱鋼FE-PA2601(A286)制鋸齒形自鎖緊帶柄螺母.等級:1100MPa(室溫)/650℃ |
Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa (at ambient temperature)/650 鳦 |
| BS EN 3015-2001 |
航空航天系列.耐熱鋼FE-PA2601(A286)制鍍銀鋸齒形自鎖緊帶柄螺母.等級:1100MPa(室溫)/650℃ |
Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 鳦 |
| BS EN 302-1-1992 |
承重木結構用膠粘劑:試驗方法.測定縱向抗拉伸剪切的粘結強度 |
(Adhesives for load-bearing timber structures: test methods - Determination of bond strength in longitudinal tensile shear) |
| BS EN 302-1-2004 |
承重木結構用膠粘劑:試驗方法.縱向抗拉伸剪切強度中粘結強度的測定 |
|
| BS EN 302-1-2004 |
承重木結構用膠粘劑.試驗方法.縱向抗拉伸剪切強度中粘結強度的測定 |
|
| BS EN 302-2-1992 |
承重木結構用膠粘劑:試驗方法.抗剝離性測定(實驗室法) |
(Adhesives for load-bearing timber structures: test methods - Determination of resistance to delamination (Laboratory method)) |
| BS EN 302-2-2004 |
承重木結構用膠粘劑:試驗方法.抗剝離性測定 |
|
| BS EN 302-2-2004 |
承重木結構用膠粘劑.試驗方法.抗剝離性測定 |
|
| BS EN 302-3-1992 |
承重木結構用膠粘劑:試驗方法.通過溫度和濕度循環試驗測定木纖維酸性腐蝕對橫向拉伸強度的影響 |
(Adhesives for load-bearing timber structures: test methods - Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength) |
| BS EN 302-3-2004 |
承重木結構用膠粘劑:試驗方法.通過溫度和濕度循環試驗測定木纖維酸性腐蝕對橫向拉伸強度的影響 |
|
| BS EN 302-3-2004 |
承重木結構用膠粘劑.試驗方法.通過溫度和濕度循環試驗測定木纖維酸性腐蝕對橫向拉伸強度的影響 |
|
| BS EN 302-4-1992 |
承重木結構用膠粘劑:試驗方法.木纖維收縮對剪切強度影響的測定 |
(Adhesives for load-bearing timber structures: test methods - Determination of the effects of wood shrinkage on the shear strength) |
| BS EN 302-4-2004 |
承重木結構用膠粘劑:試驗方法.木纖維收縮對剪切強度影響的測定 |
|
| BS EN 302-4-2004 |
承重木結構用膠粘劑.試驗方法.木材收縮對剪切強度影響的測定 |
|
| BS EN 302-6-2004 |
承重木結構用膠粘劑:試驗方法.常規加壓時間的測定 |
|
| BS EN 302-6-2004 |
承重木結構用膠粘劑.試驗方法.常規加壓時間的測定 |
|
| BS EN 302-6-2004 |
承重木結構用膠粘劑.試驗方法.常規加壓時間的測定 |
|
| BS EN 302-7-2004 |
承重木結構用膠粘劑:試驗方法.常規使用壽命的測定 |
|
| BS EN 302-7-2004 |
承重木結構用膠粘劑.試驗方法.常規使用壽命的測定 |
|
| BS EN 3026-1994 |
干膜潤滑劑.鋼試樣的腐蝕試驗 |
(Test method for dry film lubricants - Corrosion test on steel specimens) |
| BS EN 3027-1994 |
干膜潤滑劑.中性鹽霧試驗 |
(Test method for dry film lubricants - Salt spray test) |
| BS EN 303-1-1999 |
供暖鍋爐.帶強制通風燃燒器的供暖鍋爐.術語、一般要求、試驗和標記 |
(Heating boilers - Heating boilers with forced draught burners - Terminology, general requirements, testing and marking) |
| BS EN 303-2-1999 |
采暖鍋爐.強制通風式燃燒器的采暖鍋爐.第2部分:霧化油燃燒器鍋爐的特殊要求 |
(Heating boilers - Heating boilers with forced draught burners - Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners) |
| BS EN 303-3-1999 |
采暖鍋爐.帶強制通風式燃燒器的采暖鍋爐.燃?xì)庵醒牍┡仩t.由強制通風式燃燒器和鍋爐體組成的系統 |
(Heating boilers - Heating boilers with forced draught burners - Gas-fired central heating boilers - Assembly comprising a boiler body and a forced draught burner) |
| BS EN 303-4-1999 |
供暖鍋爐.帶強制通風燃燒器的供暖鍋爐.最大操作壓力3巴、最高輸出達70kW的帶強制通風燃油器的鍋爐的特殊要 |
() |
| BS EN 303-5-1999 |
供暖鍋爐.帶強制通風燃燒器的供暖鍋爐.固體燃料、人工和自動點火、額定熱輸出不大于300kW的供暖鍋爐.術語、 |
(Heating boilers - Heating boilers with forced draught burners - Heating boilers for solid fuels, hand and automatically fired, nominal heat output of up to 300 kW - Terminology, requirements, testing) |
| BS EN 303-6-2000 |
供暖鍋爐.帶強制通風燃燒嘴器的供暖鍋爐.額定熱輸入不超過70的帶自動油燃燒爐的結合式鍋爐的家用熱水操作的 |
(Heating boilers - Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not e) |
| BS EN 3030-1994 |
干膜潤滑劑試驗方法.固體成分測定 |
(Test method for dry film lubricants - Solids content) |
| BS EN 3032-1994 |
干膜潤滑劑試驗方法.厚度測量 |
(Test method for dry film lubricants - Thickness measurement) |
| BS EN 30326-1-1994 |
機械振動.車座振動評價的實驗室方法.基本要求 |
(Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Basic requirements) |
| BS EN 3035-1997 |
鍍鎘合金鋼制短螺紋緊公差標準柄翼型十字槽100°標準埋頭螺釘.等級:1100 MPa(室溫)/235℃ |
(Screws, 100 ?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 鳦) |
| BS EN 3037-1997 |
MoS2潤滑的陽極氧化鈦合金制短螺紋緊公差標準柄翼型十字槽大柱頭螺釘.等級:1100 MPa(室溫)/315℃ |
(Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoSDOWN2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 鳦) |
| BS EN 3038-1997 |
鈍化耐熱耐腐蝕鋼制短螺紋緊公差標準柄翼型十字槽大柱頭螺釘.等級:1100 MPa(室溫)/425℃ |
(Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 鳦) |
| BS EN 304-1992 |
采暖鍋爐.霧化油燃燒器采暖鍋爐檢驗規程 |
(Heating boilers - Test code for heating boilers for atomizing oil burners) |
| BS EN 3042-1992 |
質量保證.EN航空航天產品.合格鑒定程序 |
(Quality assurance - EN aerospace products - Qualification procedure) |
| BS EN 3044-1998 |
螺旋形線圈自鎖式螺紋嵌鑲件安裝孔.設計標準 |
(Installation holes for inserts, screw thread, helical coil, self-locking - Design standard) |
| BS EN 3045-1994 |
飛機機架滾動軸承.鋼制硬性單排滾珠軸承.直徑系列0和2.縮小的間隙種類.尺寸和荷載 |
(Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2. Reduced clearance category - Dimensions and loads) |
| BS EN 3046-1994 |
飛機機架滾動軸承.鍍鎘鋼制硬性單排滾珠軸承.直徑系列0和2.縮小的間隙種類.尺寸和荷載 |
(Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2. Reduced clearance category - Dimensions and loads) |
| BS EN 3047-1994 |
飛機機架滾動軸承.耐腐蝕鋼制硬性單排滾珠軸承.直徑系列0和2.縮小的間隙種類.尺寸和荷載 |
(Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2. Reduced clearance category - Dimensions and loads) |
| BS EN 3048-2001 |
具有自潤滑軸套的球面防腐鋼軸承.輕系列.環境溫度下的高負荷.負荷和尺寸 |
(Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads) |
| BS EN 3049-1998 |
碳氟橡膠制低壓縮永久變形O形環.硬度80IRHD |
(O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD) |
| BS EN 305-1997 |
熱交換器.所有熱交換器的構造性能的一般試驗程序和熱交換器的性能定義 |
(Heat exchangers - Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers) |
| BS EN 3050-1998 |
碳氟橡膠制低壓縮永久變形O形環.技術規范 |
(O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification) |
| BS EN 3052-1994 |
鈍化耐熱耐腐蝕鋼制短螺紋緊公差標準柄標準六角頭螺栓.等級:1100 MPa(室溫)/425℃ |
(Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 鳦) |
| BS EN 3053-1994 |
飛機用軸承.鋼制單列球面軸承.尺寸和負載 |
(Bearings, airframe rolling - Single row self-aligning roller bearings in steel - Dimensions and loads) |
| BS EN 3054-1994 |
飛機用軸承.鍍鉻鋼單列球面軸承.尺寸和負載 |
(Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Dimensions and loads) |
| BS EN 3055-1994 |
飛機用軸承.不銹鋼單列球面軸承.尺寸和負載 |
(Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Dimensions and loads) |
| BS EN 3056-1994 |
飛機用軸承.鋼制雙列向心球軸承.尺寸和負載 |
(Bearings, airframe rolling - Rigid double row ball bearings in steel - Dimensions and loads) |
| BS EN 3057-1994 |
飛機用軸承.鍍鉻鋼雙列向心球軸承.尺寸和負載 |
(Bearings, airframe rolling - Rigid double row ball bearings in steel, cadmium plated - Dimensions and loads) |
| BS EN 3058-1994 |
飛機用軸承.不銹鋼雙列向心球軸承.尺寸和負載 |
(Bearings, airframe rolling - Rigid double row ball bearings in corrosion resisting steel - Dimensions and loads) |
| BS EN 306-1997 |
熱交換器.性能確定用參數的測量方法 |
(Heat exchangers - Methods of measuring the parameters necessary for establishing the performance) |
| BS EN 3063-1994 |
耐熱鎳基合金NI-P101HT(沃斯帕洛尹合金)制中長螺紋緊公差柄雙六角頭螺栓.等級:1210 MPa(室溫)/730℃ |
(Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ℃) |
| BS EN 3064-1996 |
鋸齒形自鎖緊螺母.安裝程序 |
(Shank nuts, self-locking, serrated - Installation procedure) |
| BS EN 3065-1996 |
自鎖嚙合裝入鉚接螺母用安裝孔.設計標準 |
(Installation holes for self-locking, serrated shank nuts - Design standard) |
| BS EN 307-1999 |
熱交換器.制定各種類型熱交換器運轉性能的安裝,操作,和維護要求細則 |
(Heat exchangers - Guidelines for preparing installation, operating and maintenance instructions required to maintain the performance of each type of heat exchanger) |
| BS EN 308-1997 |
熱交換器.建立空氣對空氣和煙道煤氣恢復裝置的性能的試驗過程 |
(Heat exchangers - Test procedures for establishing the performance of air to air and flue gases heat recovery devices) |
| BS EN 3081-2001 |
航空航天系列.鈦合金管連接件8°30’.帶動梁密封端頭的修理用焊接箍 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Ferrules welded, with dynamic beam seal end, for repair) |
| BS EN 3082-2001 |
航空航天系列.鈦合金管連接件8°30’.修理用悶頭焊接活接頭 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Unions, bulkhead welded, for repair) |
| BS EN 3083-2001 |
航空航天系列.鈦合金管連接件8°30’.修理用悶頭長焊接端頭活接頭 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Unions, bulkhead, long welded end, for repair) |
| BS EN 3084-2001 |
航空航天系列.鈦合金管連接件8°30’.修理用焊接端頭螺紋活接頭 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Unions, welded end threaded for repair) |
| BS EN 309-1992 |
木質碎料板.定義和分類 |
(Wood particleboards - Definition and classification) |
| BS EN 309-2005 |
碎料板.定義和分類 |
|
| BS EN 30993-6-1995 |
醫療設備的生物評價.將植入物植入后局部效力試驗 |
(Biological evaluation of medical devices - Tests for local effects after implantation) |
| BS EN 31-1999 |
支座式洗臉盆.連接尺寸 |
(Pedestal wash basins - Connecting dimensions) |
| BS EN 310-1993 |
木基板.抗彎彈性模量和抗彎強度的測定 |
(Wood-based panels - Determination of modulus of elasticity in bending and of bending strength) |
| BS EN 31092-1994 |
紡織材料.生理學特性的測定.在穩定狀態條件下測量熱阻及水蒸氣阻(水氣保護熱板試驗) |
(Textiles - Determination of physiological properties - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)) |
| BS EN 311-1992 |
碎料板.碎料板表面堅固性的試驗方法 |
(Particleboards - Surface soundness of particleboards, test method) |
| BS EN 3112-1995 |
鍍鎘合金鋼制頭部加螺紋的標準六角頭螺栓.等級:900 MPa(室溫)/235℃ |
(Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 鳦) |
| BS EN 312-1-1997 |
刨花板.規范.各種板的一般要求 |
(Particleboards - Specifications - Particleboards - Specifications - General requirements for all board types) |
| BS EN 312-2-1997 |
刨花板規范.第2部分:在干躁條件下一般用途的板材的要求 |
(Particleboards - Specifications - Requirements for general purpose boards for use in dry conditions) |
| BS EN 312-2004 |
刨花板.規范 |
|
| BS EN 312-3-1997 |
刨花板規范.第3部分:在干躁區用于室內設備(包括家具)的板材的要求 |
(Particleboards - Specifications - Requirements for boards for interior fitments (including furniture) for use in dry conditions) |
| BS EN 312-4-1997 |
刨花板規范.第4部分:承載板在干燥條件下使用的要求 |
(Particleboards - Specifications - Requirements for load-bearing boards for use in dry conditions) |
| BS EN 312-5-1997 |
木屑板.規范.第5部分:在潮濕區用于承重目的板材的要求 |
(Particleboards - Specifications - Requirements for load-bearing boards for use in humid conditions) |
| BS EN 312-6-1997 |
刨花板規范.第6部分:在干躁區用于承重目的高負載板的要求 |
(Particleboards - Specifications - Requirements for heavy duty load-bearing boards for use in dry conditions) |
| BS EN 312-7-1997 |
木屑板.規范.第7部分:在潮濕區用于承重目的高負載板的要求 |
(Particleboards - Specifications - Requirements for heavy-duty load-bearing boards for use in humid conditions) |
| BS EN 31252-1996 |
激光和激光相關設備.激光裝置.對文件的最低要求 |
(Lasers and laser related equipment - Laser device - Minimum requirements for documentation) |
| BS EN 31253-1996 |
激光和激光相關設備.激光裝置.機械接口 |
(Lasers and laser-related equipment - Laser device - Mechanical interfaces) |
| BS EN 313-1-1996 |
膠合板的分類和術語.分類 |
(Plywood - Classification and terminology - Plywood - Classification and terminology - Classification) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com