標準號 |
中文名稱 |
英文名稱 |
| BS EN ISO 15136-1-2001 |
石油和天然氣工業的鉆孔設備.人工升降梯的空腔泵系統.泵 |
(Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Pumps) |
| BS EN ISO 15138-2001 |
石油和天然氣工業.海上生產設備.加熱、通風和空調設備 |
(Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning) |
| BS EN ISO 1514-1997 |
涂料和清漆.試驗標準板條 |
(Paints and varnishes - Standard panels for testing) |
| BS EN ISO 15141-1-1998 |
食品.谷類作物和谷類作物產品中赭曲霉素A的測定.硅膠凈化高效液體色譜法 |
(Foodstuffs - Determination of ochratoxin A in cereals and cereal products - High performance liquid chromatographic method with silica gel clean up) |
| BS EN ISO 15141-2-1998 |
食品.谷類作物和谷類作物產品中赭曲霉素A的測定.重碳酸鹽凈化高效液體色譜法 |
(Foodstuffs - Determination of ochratoxin A in cereals and cereal products - High performance liquid chromatographic method with bicarbonate clean up) |
| BS EN ISO 15147-1999 |
輕傳輸帶.切割輕傳輸帶的寬度和長度公差 |
(Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts) |
| BS EN ISO 15148-2003 |
建筑材料和產品的溫濕性能.部分浸入法測定吸水系數 |
(Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion) |
| BS EN ISO 15156-1-2002 |
石油和天然氣工業.在石油和天然氣生產中用于含HDOWN2S環境的材料.防裂材料的選擇的一般原則 |
(Petroleum and natural gas industries - Materials for use in HDOWN2S-containing environments in oil and gas production - General principles for selection of cracking-resistant materials) |
| BS EN ISO 1516-2002 |
石油及石油產品的試驗方法.閃點/無閃點測定.閉杯平衡法 |
(Method of test for petroleum and its products - Determination of flash/no flash - Closed cup equilibrium method) |
| BS EN ISO 1517-1994 |
涂料和清漆.表面干燥試驗.微球體法 |
(Paints and varnishes - Surface-drying test - Ballotini method) |
| BS EN ISO 15186-1-2000 |
聲學.用聲強作建筑物和建筑構件的隔聲測量.實驗室測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Laboratory measurements) |
| BS EN ISO 15187-2004 |
操作型工業機器人.機器人的程序設計和操作用圖示使用者接口(GUI-R) |
|
| BS EN ISO 15189-2003 |
醫學實驗室.質量和資格的特殊要求 |
(Medical laboratories - Particular requirements for quality and competence) |
| BS EN ISO 1519-2002 |
涂料和清漆.彎曲試驗(圓心軸) |
(Paints and varnishes - Bend test (cylindrical mandrel)) |
| BS EN ISO 15195-2003 |
實驗室醫學.基準測量實驗室要求 |
(Laboratory medicine - Requirements for reference measurement laboratories) |
| BS EN ISO 15197-2003 |
體外診斷試驗系統.糖尿病人自測用血糖檢測系統要求 |
(In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus) |
| BS EN ISO 1520-2001 |
涂料和清漆.杯突試驗 |
(Paints and varnishes - Cupping test) |
| BS EN ISO 15212-1-1999 |
擺動式密度計.實驗室儀器 |
(Oscillation-type density meters - Laboratory instruments) |
| BS EN ISO 15212-2-2002 |
振蕩式密度計.均質液體用過程測量?jī)x器 |
(Oscillation-type density meters - Process instruments for homogenous liquids) |
| BS EN ISO 15225-2000 |
命名.管理數據交換用醫療器械命名系統的規范 |
(Nomenclature - Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange) |
| BS EN ISO 1523-2002 |
石油及其產品的試驗方法.閃點測定.閉杯平衡法 |
(Method of test for petroleum and its products - Determination of flash point - Closed cup equilibrium method) |
| BS EN ISO 15236-2-2004 |
鋼絲繩運輸帶.優選帶類型 |
|
| BS EN ISO 15236-4-2004 |
鋼絲繩運輸帶.硫化的帶接頭 |
|
| BS EN ISO 1524-2000 |
涂料、清漆和印刷油墨.研磨細度的測定 |
(Paints, varnishes and printing inks - Determination of fineness of grind) |
| BS EN ISO 15245-1-2001 |
儲氣瓶.連接儲氣瓶閥門的平行螺紋.規范 |
(Gas cylinders - Parallel threads for connection of valves to gas cylinders - Specification) |
| BS EN ISO 15245-2-2001 |
儲氣瓶.連接儲氣瓶閥門的平行螺紋.量規檢驗 |
(Gas cylinders - Parallel threads for connection of valves to gas cylinders - Gauge inspection) |
| BS EN ISO 15252-1-2000 |
塑料.環氧粉末模塑化合物(EP-PMCs).名稱與符號系統和規范基礎 |
(Plastics - Epoxy powder moulding compounds (EP-PMCs) - Designation system and basis for specifications) |
| BS EN ISO 15252-2-2000 |
塑料.環氧樹脂模塑化合物(EP-PMCs).試樣制備和特性測定 |
(Plastics - Epoxy powder moulding compounds (EP-PMCs) - Preparation of test specimens and determination of properties) |
| BS EN ISO 15252-3-2000 |
塑料.環氧粉末模塑化合物(EP-PMCs).第3部分:對所選擇模塑化合物的要求 |
(Plastics - Epoxy powder moulding compounds (EP-PMCs) - Requirements for selected moulding compounds) |
| BS EN ISO 15253-2000 |
眼科光學和儀器.提高弱視力的光學裝置 |
(Ophthalmic optics and instruments - Optical devices for low-vision aids) |
| BS EN ISO 15254-2002 |
眼科光學儀器.提高視力的電光儀器 |
(Ophthalmic optics and instruments - Electro-optical devices for enhancing low vision) |
| BS EN ISO 15265-2004 |
熱環境的人類工效學.熱工作條件下防止壓力和不適的風險評估政策 |
|
| BS EN ISO 1530-2003 |
捕魚網.打結網的描述和命名 |
(Fishing nets - Description and designation of knotted netting) |
| BS EN ISO 15301-2001 |
動植物脂肪和油.粗脂肪和原油中沉積物的測定.離心法 |
(Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method) |
| BS EN ISO 15304-2002 |
動植物脂肪和油.蔬菜脂肪和油過脂肪酸異構體含量測定.氣相色譜法 |
(Animal and vegetable fats and oils - Determination of the content of trans fatty acid isomers of vegetable fats and oil - Gas chromatographic method) |
| BS EN ISO 15318-2000 |
紙漿、紙和紙板.對7個指定的聚氯聯苯(PCB)的測定 |
(Pulp, paper and board - Determination of 7 specified polychlorinated biphenyls (PCB)) |
| BS EN ISO 15320-2004 |
紙漿、紙和紙板.水提出物中五氯酚的測定 |
|
| BS EN ISO 15330-1999 |
緊固件.氫脆性檢測的預荷載試驗.平行承載表面法 |
(Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method) |
| BS EN ISO 15349-2-2003 |
非合金鋼.低碳含量的測定.(預熱)感應爐燃燒后紅外線吸收法 |
(Unalloyed steel - Determination of low carbon content - Infrared absorption method after combustion in an induction furnace (with preheating)) |
| BS EN ISO 15364-2000 |
船舶與海上技術.散貨船真空/壓力閥 |
(Ships and marine technology - Pressure/vacuum valves for cargo tanks) |
| BS EN ISO 15367-1-2003 |
激光和激光相關設備.測定激光束波陣面形狀的試驗方法.術語及基礎領域 |
(Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Terminology and fundamental aspects) |
| BS EN ISO 15438-2003 |
信息技術.自動標識和數據捕獲技術.條形碼符號表示法規范.PDF417 |
(Information technology - Automatic identification and data capture techniques - Bar code symbology specifications - PDF417) |
| BS EN ISO 15465-2004 |
管道.帶繞金屬軟管和軟管組件 |
|
| BS EN ISO 15480-1999 |
帶攻絲螺紋的六角頭墊圈自攻螺釘 |
(Hexagon washer head drilling screws with tapping screw thread) |
| BS EN ISO 15481-1999 |
帶攻絲螺紋的十字凹槽平頭自攻螺釘 |
(Cross recessed pan head drilling screws with tapping screw thread) |
| BS EN ISO 15482-1999 |
帶攻絲螺紋的十字凹槽埋頭自攻螺釘 |
(Cross recessed countersunk head drilling screws with tapping screw thread) |
| BS EN ISO 15483-1999 |
帶攻絲螺紋的十字凹槽半埋頭自攻螺釘 |
(Cross recessed raised countersunk head drilling screws with tapping screw thread) |
| BS EN ISO 15487-2001 |
紡織品.評定家洗和烘干后衣服和其它紡織品外觀的方法 |
(Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying) |
| BS EN ISO 15493-2003 |
工業用塑料管道系統.丙烯腈-丁二烯-苯乙烯共聚物(ABS)、未增塑的聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C). |
(Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly (vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) - Specifications) |
| BS EN ISO 15494-2003 |
工業用塑料管道系統.聚丁烯(PB)、聚乙烯(PE)和聚丙烯(PP).件和系統的規范.米制系列 |
(Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series) |
| BS EN ISO 15496-2004 |
織物.質量控制用途的織物水蒸氣滲透率的測量 |
|
| BS EN ISO 15526-1-2004 |
塑料.聚酮模塑和擠制材料.命名系統和基本規范 |
|
| BS EN ISO 15526-2-2004 |
塑料.聚酮(PK)模塑和擠塑材料.試樣的制備和性能的測定 |
|
| BS EN ISO 15528-2000 |
涂料、清漆與清漆和涂料用原材料.取樣 |
(Paints, varnishes and raw materials for paints and varnishes - Sampling) |
| BS EN ISO 15535-2003 |
建立人體測量數據庫的一般要求 |
(General requirements for establishing anthropometric databases) |
| BS EN ISO 15536-1-2005 |
人類功效學.計算機解剖模型和人體模型.一般要求 |
|
| BS EN ISO 15537-2004 |
工業產品和設計的人體測量方面檢驗用試驗人員的選擇和使用的原則 |
|
| BS EN ISO 15540-1999 |
造船和航海技術,軟管組件的抗燃性.試驗方法 |
(Ships and marine technology - Fire resistance of hose assemblies - Test methods) |
| BS EN ISO 15546-2003 |
石油和天然氣工業.鋁合金鉆桿 |
(Petroleum and natural gas industries - Aluminium alloy drill pipe) |
| BS EN ISO 15547-2001 |
石油和天然氣工業.板式熱交換器 |
(Petroleum and natural gas industries - Plate heat exchangers) |
| BS EN ISO 15584-2001 |
小型船舶.船內汽油發動機.安裝發動機的燃料和電氣件 |
(Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components) |
| BS EN ISO 15586-2003 |
水質.用石墨爐原子吸收光譜法測定痕量素 |
(Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace) |
| BS EN ISO 15587-1-2002 |
水質.測定水中所選素的發酵作用.王水發酵作用 |
(Water quality - Digestion for the determination of selected elements in water - Aqua regia digestion) |
| BS EN ISO 15587-2-2002 |
水質.確定水中所選素的發酵作用.硝酸發酵作用 |
(Water quality - Digestion for the determination of selected elements in water - Nitric acid digestion) |
| BS EN ISO 1559-2001 |
牙科材料.牙科汞齊合金 |
(Dental materials - Alloys for dental amalgam) |
| BS EN ISO 15605-2004 |
膠粘劑.取樣 |
|
| BS EN ISO 15606-2000 |
牙鉆手柄.氣動刮器和刮器梢尖 |
(Dental handpieces - Air-powered scalers and scaler tips) |
| BS EN ISO 15609-1-2004 |
金屬材料的焊接程序規范和合格鑒定.焊接程序規范.電弧焊 |
|
| BS EN ISO 15609-2-2001 |
金屬焊接程序的規范和合格評定.焊接程序規范.氣焊 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Gas welding) |
| BS EN ISO 15609-3-2004 |
金屬材料焊接程序的規范和合格評定.焊接程序規范.電子束焊 |
|
| BS EN ISO 15609-4-2004 |
金屬材料焊接程序的規范和合格鑒定.焊接程序規范.激光束焊接 |
|
| BS EN ISO 15609-4-2004 |
金屬材料焊接程序的規范和合格鑒定.焊接程序規范.激光束焊接 |
|
| BS EN ISO 15609-5-2004 |
金屬材料的焊接程序規范和合格鑒定.焊接程序規范.電阻焊接 |
|
| BS EN ISO 1561-1998 |
牙科用鑄造蠟 |
(Dental casting wax) |
| BS EN ISO 15610-2003 |
金屬材料焊接程序的規范和認可.基于試驗消耗品的認可 |
(Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables) |
| BS EN ISO 15612-2004 |
金屬材料焊接程序的規范和合格鑒定.標準焊接程序采用的合格鑒定 |
|
| BS EN ISO 15613-2004 |
金屬材料的焊接程序的鑒定和規范.基于預生產焊接試驗的合格鑒定 |
|
| BS EN ISO 15613-2004 |
金屬材料的焊接程序的鑒定和規范.基于預生產焊接試驗的合格鑒定 |
|
| BS EN ISO 15614-1-2004 |
金屬材料焊接程序的規范和鑒定.焊接程序試驗.鋼的弧焊和氣焊以及鎳和鎳合金的弧焊 |
|
| BS EN ISO 15614-10-2005 |
金屬材料焊接程序的規范和鑒定.焊接程序試驗.高壓干焊 |
|
| BS EN ISO 15614-11-2002 |
金屬材料焊接程序的規范和鑒定.焊接程序試驗.電子和激光束焊接 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure test - Electron and laser beam welding) |
| BS EN ISO 15614-12-2004 |
金屬材料焊接程序的規范和合格鑒定.焊接程序試驗.點焊、縫焊和凸焊 |
|
| BS EN ISO 15614-13-2005 |
金屬材料焊接程序的規范和鑒定.焊接程序試驗.電阻對接焊和電弧對接焊 |
|
| BS EN ISO 15614-5-2004 |
金屬材料焊接程序的規范和鑒定.焊接程序試驗.鈦、鋯及其合金電弧焊 |
|
| BS EN ISO 15614-8-2002 |
金屬材料焊接程序的規范和鑒定.焊接程序試驗.管對管板接頭焊接 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure test - Welding of tubes to tube-plate joints) |
| BS EN ISO 15615-2002 |
氣焊設備.焊接用乙炔復式接頭系統、切割和有關處理用乙炔復式接頭系統.高壓裝置的安全要求 |
(Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices) |
| BS EN ISO 15616-1-2003 |
高質量焊接和切割用CO2激光射線機的驗收試驗.通用原則和驗收條件 |
(Acceptance tests for CODOWN2- laser beam machines for high quality welding and cutting - General principles, acceptance conditions) |
| BS EN ISO 15616-2-2003 |
高質量焊接和切割用CO2激光射線機的驗收試驗.靜態和動態準確度的測定 |
(Acceptance tests for CODOWN2- laser beam machines for high quality welding and cutting - Measurement of static and dynamic accuracy) |
| BS EN ISO 15616-3-2003 |
高質量焊接和切割用CO2激光射線機的驗收試驗.氣體流量和壓力測量?jī)x的校正 |
(Acceptance tests for CODOWN2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure) |
| BS EN ISO 15618-1-2002 |
水下焊接焊工的資格鑒定測試.高壓濕法焊接的潛水焊工 |
(Qualification testing of welders for under-water welding - Diver-welders for hyperbaric wet welding) |
| BS EN ISO 15618-2-2002 |
水下焊接焊工的資格鑒定測試.高壓干法焊接的潛水焊工和焊接操作者 |
(Qualification testing of welders for under-water welding - Diver-welders and welding operators for hyperbaric dry welding) |
| BS EN ISO 1562-1995 |
牙科用鑄造金合金 |
(Dental casting gold alloys) |
| BS EN ISO 1562-2004 |
牙科.鑄造金合金 |
|
| BS EN ISO 15620-2000 |
焊接.金屬材料裂縫焊接 |
(Welding - Friction welding of metallic materials) |
| BS EN ISO 15630-1-2002 |
混凝土的鋼筋和預應力用鋼.試驗方法.加筋棒、鋼絲桿和鋼絲 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Reinforcing bars, wire rod and wire) |
| BS EN ISO 1564-1999 |
水化牙科瓊脂基印模材料 |
(Dental aqueous impression materials based on agar) |
| BS EN ISO 15641-2001 |
高速切削機床用銑刀.安全要求 |
(Milling cutters for high speed machining - Safety requirements) |
| BS EN ISO 15652-2005 |
小型船舶.小型噴水推進艇艙內用遙控操縱系統 |
|
| BS EN ISO 15667-2000 |
聲學.由外殼和艙室控制的噪音控制指南 |
(Acoustics - Guidelines for noise control by enclosures and cabins) |
| BS EN ISO 1567-2001 |
牙科學.假牙基料聚合物 |
(Dentistry - Denture base polymers) |
| BS EN ISO 15681-1-2004 |
水質.用流量分析(FIA/CFA)測定正磷酸鹽和總磷含量.流量注入分析法(FIA) |
|
| BS EN ISO 15681-2-2004 |
水質.用流量分析(FIA/CFA)測定正磷酸鹽和總磷含量.連續流量分析方法(CFA) |
|
| BS EN ISO 15695-2001 |
釉層和搪瓷.搪瓷涂層耐劃痕性的測定 |
(Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes) |
| BS EN ISO 15700-1999 |
皮革.色牢度試驗.耐水斑點色牢度 |
(Leather - Tests for colour fastness - Colour fastness to water spotting) |
| BS EN ISO 15701-1999 |
皮革.色牢度試驗.受聚氯乙烯影響的色牢度 |
(Leather - Tests for colour fastness - Colour fastness to migration into plasticized poly (vinyl chloride)) |
| BS EN ISO 15702-2000 |
皮革.色牢度試驗.機洗對色牢度的影響 |
(Leather - Tests for colour fastness - Colour fastness to machine washing) |
| BS EN ISO 15703-1999 |
皮革.色牢度試驗.輕柔洗滌對色牢度的影響 |
(Leather - Tests for colour fastness - Colour fastness to mild washing) |
| BS EN ISO 15711-2005 |
色漆和清漆.曝露于海水中覆層耐陰極解粘合作用的測定 |
|
| BS EN ISO 15720-2001 |
金屬涂層.孔隙率試驗.膠材料電譜法測定金屬襯底上金和鈀涂層的孔隙率 |
(Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography) |
| BS EN ISO 15721-2001 |
金屬涂層.孔隙率試驗.用亞硫酸和二氧化硫蒸汽對金和鈀涂層孔隙率的測定 |
(Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour) |
| BS EN ISO 15744-2002 |
手持非電動工具.噪聲測量代碼.工程法(2級) |
(Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2)) |
| BS EN ISO 15748-1-2002 |
船和造船技術.船上用小型水站和造船結構.計劃和設計 |
(Ships and marine technology - Potable water supply on ships and marine structures - Planning and design) |
| BS EN ISO 15748-2-2002 |
船和造船技術.船上用小型水站和造船結構.計算方法 |
(Ships and marine technology - Potable water supply on ships and marine structures - Method of calculation) |
| BS EN ISO 15749-1-2004 |
船舶和海上技術.船舶和海上結構物的排水系統.衛生排水系統設計 |
|
| BS EN ISO 15749-2-2004 |
船舶和海上技術.船舶和海上結構物的排水系統.重力系統用衛生排水和排水管道 |
|
| BS EN ISO 15749-3-2004 |
船舶和海上技術.船舶和海上結構物的排水系統.真空系統用衛生排水和排水管道 |
|
| BS EN ISO 15749-4-2004 |
船舶和海上技術.船舶和海上結構物的排水系統.衛生排水和污水處理管 |
|
| BS EN ISO 15749-5-2004 |
船舶和海上技術.船舶和海上結構物的排水系統.甲板、貨艙和游泳池的排水 |
|
| BS EN ISO 15755-2000 |
紙和紙板.對比估計 |
(Paper and board - Estimation of contraries) |
| BS EN ISO 15761-2003 |
石油和天然氣工業用尺寸為DN 100及更小的鋼閘閥、球閥和止回閥 |
(Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com