標準號 |
中文名稱 |
英文名稱 |
| BS 3314-1982 |
液體加工用防護圍裙規范 |
(Specification for protective aprons for wet work) |
| BS 3316-1-1987 |
焚燒爐.第1部分:醫院廢物焚燒裝置性能要求 |
(Incinerators. Specification for standard performance requirements for incineration plant for the destruction of hospital waste) |
| BS 3316-2-1987 |
焚燒爐.第2部分:醫院廢物焚燒裝置性能試驗和計算方法 |
(Incinerators. Methods of test and calculation for the performance of incineration plant for the destruction of hospital waste) |
| BS 3316-3-1987 |
焚燒爐.第3部分:醫院廢物焚燒裝置買方要求的規范方法 |
(Incinerators. Method for specifying purchasers’ requirements for incineration plant for the destruction of hospital waste) |
| BS 3316-4-1987 |
焚燒爐.第4部分:醫院廢物焚燒裝置的設計、規范、安裝和使用的實用規程 |
(Incinerators. Code of practice for the design, specification, installation and commissioning of incineration plant for the destruction of hospital waste) |
| BS 3318-1978 |
土方機械規范.重心定位方法 |
(Specification for earth-moving machinery - method for locating the centre of gravity) |
| BS 3320-1988 |
機織物紗線耐經緯滑動性的測定方法 |
(Method for determination of slippage resistance of yarns in woven fabrics: seam method) |
| BS 3321-1986 |
織物的等效孔徑測量方法(氣泡壓力試驗) |
(Method for measurement of the equivalent pore size of fabrics (bubble pressure test)) |
| BS 3322-1981 |
矩形尺和斜角規規范 |
(Specification for carpenters’ squares and bevels) |
| BS 3323-1992 |
有關固體礦物燃料的取樣、試驗和分析的術語詞匯 |
(Glossary of terms relating to sampling, testing and analysis of solid mineral fuels) |
| BS 3332-1987 |
軸承用白合金錠規范 |
(Specification for white metal bearing alloy ingots) |
| BS 3338-10-1961 |
錫及錫合金的取樣及分析方法.第10部分:錫錠、錫鉛焊料及軸承用白合金中鐵的測定方法(光度測定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of iron in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)) |
| BS 3338-11-1961 |
錫及錫合金的取樣及分析方法.第11部分:焊料中錫的測定方法(鎳帶卷還原法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in solders (nickel coil reduction method)) |
| BS 3338-13-1965 |
錫及錫合金的取樣及分析方法.第13部分:焊料及軸承用白合金中銻的測定方法(溴酸鉀容量法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of antimony in solders and white metal bearing alloys (volumetric: potassium bromate method)) |
| BS 3338-14-1965 |
錫及錫合金的取樣及分析方法.第14部分:軸承用白合金錠的取樣方法 |
(Methods for the sampling and analysis of tin and tin alloys - Method for the sampling of white metal bearing alloy ingots) |
| BS 3338-15-1965 |
錫及錫合金的取樣及分析方法.第15部分:軸承用白合金中銅和鉛的測定方法(電解鍍層法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper and lead in white metal bearing alloys (electrodeposition method)) |
| BS 3338-16-1965 |
錫及錫合金的取樣及分析方法.第16部分:軸承用白合金中錫的測定方法(鎳帶卷還原法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in white metal bearing alloys (nickel coil reduction method)) |
| BS 3338-17-1965 |
錫及錫合金的取樣及分析方法.第17部分:焊料及軸承用白合金中鎘的測定方法(光度測定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of cadmium in solders and white metal bearing alloys (photometric method)) |
| BS 3338-18-1966 |
錫及錫合金的取樣及分析方法.第18部分:焊料及軸承用白合金中鋁的測定方法(光度測定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of aluminium in solders and white metal bearing alloys (photometric method)) |
| BS 3338-19-1966 |
錫及錫合金的取樣及分析方法.焊料及軸承用白合金中鋅的測定方法(光度測定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of zinc in solders and white metal bearing alloys (photometric method)) |
| BS 3338-1966 |
錫及錫合金的取樣及分析方法.第19部分:焊料及軸承用白合金中鋅的測定方法 |
(光度測定法(Methods for the sampling and analysis of tin and tin alloys. Method for the determination of zinc in solders and white metal bearing alloys (photometric method)) |
| BS 3338-2-1961 |
錫及錫合金的取樣及分析方法.第2部分:錫錠中錫的測定方法(鋁還原法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in ingot tin (aluminium reduction method)) |
| BS 3338-20-1970 |
錫及錫合金的取樣及分析方法.第20部分:澆灌金屬中鎳的測定方法(光度測定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of nickel in capping metal (photometric method)) |
| BS 3338-21-1983 |
錫及錫合金的取樣及分析方法.第21部分:軟焊料中高鎘含量的測定方法 |
(Methods for the sampling and analysis of tin and tin alloys - Determination of high cadmium content of soft solders) |
| BS 3338-3-1961 |
錫及錫合金的取樣及分析方法.第3部分:錫錠中銻的測定方法(光度測定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of antimony in ingot tin (photometric method)) |
| BS 3338-4-1961 |
錫及錫合金的取樣及分析方法.第4部分:錫錠及錫鉛焊料中銅的測定方法(光度測定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper in ingot tin and tin-lead solders (photometric method)) |
| BS 3338-5-1961 |
錫及錫合金的取樣及分析方法.第5部分:錫錠及錫銻焊料中鉛的測定方法(光度測定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of lead in ingot tin and tin-antimony solders (photometric method)) |
| BS 3338-6-1961 |
錫及錫合金的取樣及分析方法.第6部分:高純度錫錠中銅的測定方法(光度測定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper in high purity ingot tin (photometric method)) |
| BS 3338-7-1961 |
錫及錫合金的取樣及分析方法.第7部分:焊料中銀的測定方法(硫氰酸銨容量法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of silver in solders (volumetric: ammonium thiocyanate method)) |
| BS 3338-8-1961 |
錫及錫合金的取樣及分析方法.第8部分:錫錠、錫鉛焊料及軸承用白合金中鉍的測定方法(光度測定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of bismuth in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)) |
| BS 3338-9-1965 |
錫及錫合金的取樣及分析方法.第9部分:錫錠、焊料及軸承用白合金中砷的測定方法(光度測定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of arsenic in ingot tin, solders and white metal bearing alloys (photometric method)) |
| BS 3347-1961 |
鐵路信號跟蹤電路用的電容器規范 |
(Specification for capacitors for railway signalling track circuits) |
| BS 3348-1961 |
竇套針及套管規范 |
(Specification for antral trocars and cannulae) |
| BS 3356-1990 |
織物彎曲長度和撓曲硬度的測定方法 |
(Method for determination of bending length and flexural rigidity of fabrics) |
| BS 336-1989 |
消防軟管接頭與輔助設備的規范 |
(Specification for fire hose couplings and ancillary equipment) |
| BS 3367-1999 |
不包括營救繩的消防隊用繩索規范 |
(Specification for ropes and lines for fire service use other than for rope rescue purposes) |
| BS 3375-1-1995 |
工效研究和組織與方法.第1部分:組織研究指南 |
(Management services - Guide to organization study.) |
| BS 3375-2-1993 |
管理工作.方法研究指南 |
(Management services - Guide to method study) |
| BS 3375-3-1993 |
管理工作.工作測量指南 |
(Management services - Guide to work measurement) |
| BS 3375-4-1993 |
管理工作.工作性能管理指南 |
(Management services - Guide to work performance control) |
| BS 3375-5-1997 |
管理服務器.工作測量中曝光極限、復原時間和放松時間的測定指南 |
(Management services - Guide to determination of exposure limits, recovery times and relaxation times in work measurement) |
| BS 3376-1994 |
帶或不帶鍋爐的燒固體礦物燃料的對流式通風明火爐規范 |
(Specification for open fires burning solid mineral fuels with convection, with or without boilers) |
| BS 3377-1985 |
供家用固體礦物燃料裝置用的鍋爐規范 |
(Specification for boilers for use with domestic solid mineral fuel appliances) |
| BS 3378-1986 |
燒固體礦物燃料的房間加熱器規范 |
(Specification for roomheaters burning solid mineral fuels) |
| BS 3379-2003 |
承重用撓性聚氨酯泡沫材料規范 |
(Flexible polyurethane cellular materials for loadbearing applications - Specification) |
| BS 3379-2005 |
承重用改進燃燒性的柔性聚氨酯多孔材料.規范 |
|
| BS 3381-1990 |
BS 1560鋼法蘭用繞制螺旋形密封墊規范 |
(Specification for spiral wound gaskets for steel flanges to BS 1560) |
| BS 3382 Pts.1 and 2-1961 |
螺紋件上的電鍍覆層規范.鋼件上的鎘.鋼件上的鋅 |
(Specification for electroplated coatings on threaded components - Cadmium on steel components - Zinc on steel components) |
| BS 3382 Pts.3 and 4-1965 |
螺紋件上的電鍍覆層規范.鋼件上的鎳或鎳鉻.銅和銅合金(包括黃銅)件上的鎳或鎳鉻 |
(Specification for electroplated coatings on threaded components - Nickel or nickel plus chromium on steel components - Nickel or nickel plus chromium on copper and copper alloy (including brass) compo) |
| BS 3382 Pts.5 and 6-1967 |
螺紋件上的電鍍覆層規范.銅和銅合金(包括黃銅)件上的錫.銅和銅合金(包括黃銅)件上的銀 |
(Specification for electroplated coatings on threaded components - Tin on copper and copper alloy (including brass) components - Silver on copper and copper alloy (including brass) components) |
| BS 3382-7-1966 |
螺紋部件的電鍍層規范.第7部分:螺紋件的厚電鍍層 |
(Specification for electroplated coatings on threaded components - Thicker platings for threaded components) |
| BS 3385-1973 |
直讀袖珍式驗電器曝光表規范 |
(Specification for direct reading pocket type electroscope exposure meters) |
| BS 3388-1973 |
叉子、鐵鍬和鏟規范 |
(Specification for forks, shovels and spades) |
| BS 3388-2004 |
叉子、鐵鍬和鏟.要求和試驗方法 |
|
| BS 3396-2-1987 |
塑料增強用的機織玻璃纖維織物.第2部分:退漿織物規范 |
(Woven glass fibre fabrics for plastics reinforcement - Specification for desized fabrics) |
| BS 3396-3-1987 |
塑料增強用的機織玻璃纖維織物.第3部分:供聚酯樹脂系統用的成品布規范 |
(Woven glass fibre fabrics for plastics reinforcement - Specification for finished fabrics for use with polyester resin systems) |
| BS 3399-1961 |
船舶用變壓器規范 |
(Specification for transformers for use in ships) |
| BS 3401-1961 |
鈹銅卷曲墊圈規范 |
(Specification for beryllium copper crinkle washers) |
| BS 3402-1969 |
衛生陶瓷設備的質量規范 |
(Specification for quality of vitreous china sanitary appliances) |
| BS 3403-1972 |
工業、鐵路和海運用的指示轉速表及速度表系統規范 |
(Specification for indicating tachometer and speedometer systems for industrial, railway and marine use) |
| BS 3405-1983 |
顆粒狀排出物(包括砂礫、灰埃)的簡易測定方法 |
(Method for measurement of particulate emission including grit and dust (simplified method)) |
| BS 3406-1-1986 |
粒度分布的測定方法.第1部分:粉末取樣指南 |
(Methods for determination of particle size distribution - Guide to powder sampling) |
| BS 3406-4-1993 |
粒度分布的測定方法.顯微鏡和成象分析方法指南 |
(Methods for determination of particle size distribution - Guide to microscope and image analysis methods) |
| BS 3406-8-1997 |
粒度分布的測定方法.第7部分:光子相干譜 |
(Methods for determination of particle size distribution - Photon correlation spectroscopy) |
| BS 3406-9-1997 |
粒度分布測定法.過濾器阻塞法的建議(死網眼) |
(Methods for determination of particle size distribution - Recommendations for the filter blockage method (mesh obscuration)) |
| BS 3407-1982 |
焦炭篩選設備的評定指南 |
(Guide for assessing coke screening plant) |
| BS 3408-1992 |
漆布規范 |
(Specification for tarpaulins) |
| BS 3409-1-1961 |
金屬絲螺紋鑲件承受孔攻螺紋(統一標準粗牙螺紋和統一標準細牙螺紋)規范.第1部分:孔徑為1/4英寸以上(含1/4英 |
(Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads) - Diameters) |
| BS 3409-2-1966 |
金屬絲螺紋鑲件承受孔攻螺紋(統一標準粗牙螺紋和統一標準細牙螺紋)規范 .第2部分:孔徑為小于1/4英寸的孔 |
(Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads) - Diameters below) |
| BS 341-3-2002 |
可運輸氣體容器的閥門.閥門出口接頭 |
(Transportable gas container valves - Valve outlet connections) |
| BS 341-4-2004 |
可運輸氣體容器的閥門.減壓裝置 |
|
| BS 3410-1961 |
一般工程用金屬墊圈規范 |
(Specification for metal washers for general engineering purposes) |
| BS 3412-1992 |
模塑和擠出用一般用途聚乙烯材料的規定方法 |
(Methods of specifying general purpose polyethylene materials for moulding and extrusion) |
| BS 3415-1986 |
軟百葉簾規范 |
(Specification for venetian blinds) |
| BS 3416-1991 |
適用于與飲用水接觸的冷涂瀝青基覆層規范 |
(Specification for bitumen-based coatings for cold application, suitable for use in contact with potable water) |
| BS 3417-1-1984 |
農林拖拉機與機械用動力輸出軸和防護裝置.第1部分:動力輸出驅動軸規范 |
(Power take-off shafts and guards for tractors and machinery for agriculture and forestry - Specification for power take-off drive shafts) |
| BS 3417-3-1986 |
農林拖拉機與機械用動力輸出軸和防護裝置.第3部分:第1部分:動力輸出驅動軸規范的補充要求和第2部分:防護裝 |
(Power take-off shafts and guards for tractors and machinery for agriculture and forestry - Supplementary requirements to Part 1: ’specification for power take-off drive shafts’ and to Part 2: ’Methods) |
| BS 3423-1986 |
實驗室用玻璃真空器(包括干燥器)的設計推薦規范 |
(Recommendations for design of glass vacuum vessels (including desiccators) for laboratory use) |
| BS 3424-0-2000 |
涂層織物試驗.各部分的索引 |
(Testing coated fabrics - Index of parts) |
| BS 3424-10-1987 |
涂層織物試驗.方法12A及12B.表面阻力測定 |
(Testing coated fabrics - Methods 12A and 12B Determination of surface drag) |
| BS 3424-13-1999 |
涂層織物試驗.光隙試驗色牢度方法的選擇指南 |
(Testing coated fabrics - Guide to the selection of methods for colour fastness to light testing) |
| BS 3424-14-1985 |
涂層織物試驗.方法16.濕摩擦和干摩擦色牢度及印花耐磨損性的測定方法 |
Testing coated fabrics - Method 16 - Methods for determination of colour fastness to wet and dry rubbing and determination of resistance to printwear |
| BS 3424-16-1995 |
涂層織物測試.第16部分:透氣性的測定 |
(Testing coated fabrics - Method 18 - Determination of air permeability) |
| BS 3424-17-1987 |
涂層織物試驗.方法20.浸水后尺寸穩定性的測定方法 |
(Testing coated fabrics - Method 20 - Method for determination of dimensional stability to water immersion) |
| BS 3424-18-1986 |
涂層織物試驗.方法21A 及21B.抗芯吸和側向泄漏的測定方法 |
(Testing coated fabrics - Methods 21A and 21B - Methods for determination of resistance to wicking and lateral leakage) |
| BS 3424-19-1989 |
涂層織物試驗方法.方法22A、22B 及22C.硫銹蝕性的測定 |
(Testing coated fabrics - Methods 22A, 22B and 22C - Determination of sulphur staining) |
| BS 3424-1989 |
涂層織物試驗方法.第19部分:方法22A、22B 及22C:硫銹蝕性的測定 |
(Testing coated fabrics. Methods 22A, 22B and 22C. Determination of sulphur staining) |
| BS 3424-20-1987 |
涂層織物試驗.方法23.無拉力時機械松弛尺寸變化的測定方法 |
(Testing coated fabrics - Method 23 - Method for determination of dimensional changes on mechanical relaxation at zero tension) |
| BS 3424-21-1993 |
涂層織物試驗.方法24.伸長和拉伸永久變形的測定方法 |
(Testing coated fabrics - Method 24 - Method for determination of elongation and tension set) |
| BS 3424-22-1983 |
涂層織物試驗.方法25.聚氯乙烯涂層的熔化和硫化橡膠涂層的硫化程度的測定方法 |
(Testing coated fabrics - Method 25 - Methods for determination of fusion of PVC coatings and the state of cure of vulcanized rubber coatings) |
| BS 3424-24-1990 |
涂層織物試驗方法.第24部分:方法27A和27B:抗磨性的測定方法 |
(Testing coated fabrics - Methods 27A and 27B - Methods for determination of abrasion resistance) |
| BS 3424-25-1993 |
涂層織物的試驗方法.方法28:涂層厚度和任一擴展層厚度的測量方法 |
(Testing coated fabrics - Method 28 - Method for determination of the coating thickness and thickness of any expanded layer) |
| BS 3424-26-1990 |
涂層織物試驗方法.第26部分:方法29A、29B 及29C和29D:抗透水性和表面潤濕性的測定方法 |
(Testing coated fabrics - Methods 29A, 29B, 29C and 29D - Methods for determination of resistance to water penetration and surface wetting) |
| BS 3424-28-1995 |
涂層織物試驗.第28部分:方法31.拋光光澤度的測定 |
(Testing coated fabrics - Method 31 - Determination of specular gloss) |
| BS 3424-31-1990 |
涂層織物試驗方法.第31部分:方法34:抗劃痕性和粗擦損性的測定方法 |
(Testing coated fabrics - Method 34 - Method for determination of resistance to scuffing and snagging) |
| BS 3424-34-1992 |
涂層織物試驗方法.第34部分:方法37:水蒸氣滲透系數的測定方法 |
(Testing coated fabrics - Method 37 - Method for determination of water vapour permeability index (WVPI)) |
| BS 3424-36-1993 |
涂層織物試驗.方法36:家用涂層織物耐洗滌尺寸穩定性的測定方法 |
(Testing coated fabrics - Method 39 - Method for determination of the dimensional stability of coated fabrics to domestic washing) |
| BS 3424-38-1998 |
試驗涂層織物.損傷碎裂強度的測定 |
(Testing coated fabrics - Determination of wounded burst strength) |
| BS 3441-1995 |
牛奶和液態牛奶制品運輸箱規范 |
(Specification for tanks for the transport of milk and liquid milk products) |
| BS 3445-1-1992 |
牲畜飲水槽和配件.第1部分:水槽體,服務箱和供水系統規范 |
(Agricultural water troughs and water fittings - Specification for water trough bodies, service boxes and water supply system) |
| BS 3445-2-1992 |
牲畜飲水槽和配件.第2部分:成套設備和操作實用規程 |
(Agricultural water troughs and water fittings - Code of practice for installation and operation) |
| BS 3446-1-1990 |
耐火材料的術語匯編.第1部分:一般用語和生產用語 |
(Glossary of terms associated with refractory materials - General and manufacturing) |
| BS 3446-2-1990 |
耐火材料的術語匯編.第2部分:適用于焦碳、玻璃、 水泥和其它非冶金工業的詞匯 |
(Glossary of terms associated with refractory materials - Applications in the coke, glass, cement and other non-metallurgical industries) |
| BS 3446-3-1990 |
耐火材料的術語詞匯.第3部分:在冶金工業中的應用 |
(Glossary of terms associated with refractory materials - Applications in the metallurgical industries) |
| BS 3447-1962 |
玻璃工業用術語詞匯 |
(Glossary of terms used in the glass industry) |
| BS 3449-1990 |
織物耐吸水性的試驗方法(靜態浸漬試驗) |
(Method for resistance of fabrics to water absorption (static immersion test)) |
| BS 3454-1995 |
煤礦用的1.9/3.3kV、300A螺栓連接防爆電纜連接器和適配器規范(包括380/660V和640/1100V,300A適配器) |
(Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines) |
| BS 3455-1973 |
原子核科學技術用術語詞匯 |
(Glossary of terms used in nuclear science and technology) |
| BS 3456-202.46-1990 |
家用和類似用途電器的安全規范.第202部分:特殊要求.第46節:商用電蒸氣鍋 |
(Specification for safety of household and similar electrical appliances - Particular requirements - Specification for safety of household and similar electrical appliances - Particular requirements -) |
| BS 3457-1973 |
水龍頭與截止閥座墊圈材料規范 |
(Specification for materials for water tap and stopvalve seat washers) |
| BS 3459-1985 |
制圖板支架規范 |
(Specification for stands for drawing boards) |
| BS 3463-1975 |
壓力容器的水位觀察和水位計用玻璃規范 |
(Specification for observation and gauge glasses for pressure vessels) |
| BS 3466-1962 |
金屬電阻材料每單位長度電阻試驗方法 |
(Methods of test for resistance per unit length of metallic electrical resistance material) |
| BS 3467-1962 |
精密電阻器用合金線的電阻溫度系數試驗方法 |
(Method of test for temperature coefficient of resistance of alloy wire for precision resistors) |
| BS 3469-1985 |
儀器用精密滾動軸承(球軸承)規范 |
(Specification for instrument precision rolling bearings (ball bearings)) |
| BS 3470-1975 |
工地大門和支柱規范 |
(Specification for field gates and posts) |
| BS 3473-1-1991 |
制作實驗室玻璃器皿用玻璃的耐化學腐蝕性.第1部分:玻璃抗混合強堿沸水溶液腐蝕性的測定方法 |
(Chemical resistance of glass used in the production of laboratory glassware - Method for determination of resistance of glass to attack by a boiling aqueous solution of mixed alkali) |
| BS 3473-2-1987 |
制作實驗室玻璃器皿用玻璃的耐化學腐蝕性.玻璃組織在98℃時耐水解性的測定方法 |
(Chemical resistance of glass used in the production of laboratory glassware - Method for determination of hydrolytic resistance of glass grains at 98 鳦) |
| BS 3473-3-1987 |
制作實驗室玻璃器皿用玻璃的耐化學腐蝕性.玻璃組織在121℃時耐水解性的測定方法 |
(Chemical resistance of glass used in the production of laboratory glassware - Method for determination of hydrolytic resistance of glass grains at 121 鳦) |
| BS 3473-4.1-1989 |
制作實驗室玻璃器皿用玻璃的耐化學腐蝕性.第4部分:玻璃容器內表面的耐水解性的測定方法.第1節:用滴定法和和 |
(Chemical resistance of glass used in the production of laboratory glassware - Methods for determination of hydrolytic resistance of the interior surfaces of glass containers - Determination by titrati) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com