標準號 |
中文名稱 |
英文名稱 |
| BS ISO 14900-2001 |
塑料.聚氨酯生產用多醇.羥基值測定 |
Plastics - Polyols for use in the production of polyurethane - Determination of hydroxyl number |
| BS ISO 14910-1-1998 |
塑料.熱塑聚酯/聚醚和聚酯/聚醚鑄模和擠壓彈性體.命名體系和規范基礎 |
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Designation system and basis for specifications |
| BS ISO 14910-2-1998 |
塑料.熱塑聚酯/聚醚和聚酯/聚醚鑄模和擠壓彈性體.試樣制備和性能測定 |
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Preparation of test specimens and determination of properties |
| BS ISO 14912-2003 |
氣體分析.氣體混合成份數據的轉換 |
(Gas analysis - Conversion of gas mixture composition data) |
| BS ISO 14943-2004 |
核燃料技術.核臨界安全的相關管理標準 |
|
| BS ISO 14949-2001 |
外科植入物.兩節附加加工的硅彈性體 |
Implants for surgery - Two-part addition-cure silicone elastomers |
| BS ISO 14950-2004 |
航天系統.不載人航天器的可操作性 |
|
| BS ISO 14951-1-1999 |
航天系統.流體特性.氧 |
Space systems - Fluid characteristics - Oxygen |
| BS ISO 14951-10-1999 |
航天系統.流體特性.水 |
Space systems - Fluid characteristics - Water |
| BS ISO 14951-11-1999 |
航天系統.流體特性.氨 |
Space systems - Fluid characteristics - Ammonia |
| BS ISO 14951-12-1999 |
航天系統.流體特性.二氧化碳 |
Space systems - Fluid characteristics - Carbon dioxide |
| BS ISO 14951-13-1999 |
航天系統.流體特性.呼吸用空氣 |
Space systems - Fluid characteristics - Breathing air |
| BS ISO 14951-2-1999 |
航天系統.流體特性.氫推進劑 |
Space systems - Fluid characteristics - Hydrogen propellant |
| BS ISO 14951-3-1999 |
航天系統.流體特性.氮 |
Space systems - Fluid characteristics - Nitrogen |
| BS ISO 14951-4-1999 |
航天系統.流體特性.氦 |
Space systems - Fluid characteristics - Helium |
| BS ISO 14951-5-1999 |
航天系統.流體特性.四氧化氮推進劑 |
Space systems - Fluid characteristics - Nitrogen tetroxide propellant |
| BS ISO 14951-6-1999 |
航天系統.流體特性.一甲基聯氨推進劑 |
Space systems - Fluid characteristics - Monomethylhydrazine propellant |
| BS ISO 14951-7-1999 |
航天系統.流體特性.聯氨推進劑 |
Space systems - Fluid characteristics - Hydrazine propellant |
| BS ISO 14951-8-1999 |
航天系統.流體特性.煤油推進劑 |
Space systems - Fluid characteristics - Kerosene propellant |
| BS ISO 14951-9-1999 |
航天系統.流體特性.氬 |
Space systems - Fluid characteristics - Argon |
| BS ISO 14952-1-2004 |
航天系統.液體系統的表面清潔度.詞匯 |
|
| BS ISO 14952-2-2004 |
航天系統.液體系統的表面清潔度.清潔度等級 |
|
| BS ISO 14952-3-2004 |
航天系統.液體系統的表面清潔度.不揮發性殘流物和顆粒污染物的測定用分析程序 |
|
| BS ISO 14952-4-2004 |
航天系統.液體系統的表面清潔度.粗略清潔過程 |
|
| BS ISO 14952-4-2004 |
航天系統.液體系統的表面清潔度.粗略清潔過程 |
|
| BS ISO 14952-5-2004 |
航天系統.液體系統的表面清潔度.干燥過程 |
|
| BS ISO 14952-6-2004 |
航天系統.液體系統的表面清潔度.精確清潔過程 |
|
| BS ISO 14953-2000 |
航天系統.結構設計.發射的飛行器靜態合格性試驗用負載水平的測定 |
Space systems - Structural design - Determination of loading levels for static qualification testing of launch vehicles |
| BS ISO 1496-2-1997 |
第1系列貨運集裝箱.規范和試驗.保溫集裝箱 |
(Series 1 freight containers - Specification and testing - Thermal containers) |
| BS ISO 1496-3-1995 |
貨運集裝箱系列1.規范和試驗.第3部分:液體、氣體和加壓散料用罐式集裝箱 |
Series 1 freight containers - Specification and testing - Tank containers for liquids, gases and pressurized dry bulk |
| BS ISO 1496-4-1995 |
貨運集裝箱系列1.規范和試驗.不加壓的散料集裝箱 |
Series 1 freight containers - Specification and testing - Non-pressurized containers for dry bulk |
| BS ISO 14961-2002 |
空間數據和信息傳輸系統.參數值語言規范 |
Space data and information transfer systems - Parameter value language specification |
| BS ISO 14964-2001 |
機械振動.固定結構的振動.振動的測量和評價中質量管理的特殊要求 |
Mechanical vibration and shock - Vibration of stationary structures - Specific requirements for quality management in measurement and evaluation of vibration |
| BS ISO 14965-2000 |
環境空氣.全部無甲烷有機化合物的測定.低溫預濃縮和直接火焰電離探測法 |
Ambient air - Determination of total non-methane organic compounds - Cryogenic preconcentration and direct flame ionization detection method |
| BS ISO 14966-2002 |
環境空氣.無機纖維顆粒的數值濃度的測定.掃描電子顯微鏡檢查法 |
Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method |
| BS ISO 14968-2000 |
紙和紙板.切割尺寸辦公室用紙.一包紙卷曲的測量 |
Paper and board - Cut-size office paper - Measurement of curl in a pack of sheets |
| BS ISO 14972-1999 |
帶over-needle外部管內導管的一次性滅菌塞 |
Sterile obturators for single use with over-needle peripheral intravascular catheters |
| BS ISO 14975-2001 |
表面化學分析.信息格式 |
Surface chemical analysis - Information formats |
| BS ISO 14976-1998 |
表面化學分析.數據傳送格式 |
Surface chemical analysis - Data transfer format |
| BS ISO 14985-1999 |
工程圖紙的硬拷貝輸出.控制文件的結構規范 |
Hard-copy output of engineering drawings - Specification for the structure of control files |
| BS ISO 14997-2003 |
光學和光學儀器.測定光學件表面缺陷的試驗方法 |
(Optics and optical instruments - Test methods for surface imperfections of optical elements) |
| BS ISO 15-1998 |
滾動軸承.徑向軸承.邊界尺寸,一般計劃 |
Rolling bearings - Radial bearings - Boundary dimensions, general plan |
| BS ISO 15001-2003 |
麻醉和呼吸設備.與氧氣的兼容性 |
(Anaesthetic and respiratory equipment - Compatibility with oxygen) |
| BS ISO 15009-2002 |
土壤質量.揮發性香料烴類物質、萘和鹵化烴含量的氣相色譜分析測定.有熱解吸作用的洗滌和打擊法 |
Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption |
| BS ISO 15010-1998 |
輸液和輸注瓶用一次性懸吊裝置.要求和試驗方法 |
Disposable hanging devices for transfusion and infusion bottles - Requirements and test methods |
| BS ISO 15016-2002 |
船舶和海上技術.用速度試驗數據分析法對速度和動力性能的評定導則 |
Ships and marine technology - Guidelines for the assessment of speed and power performance by analysis of speed trial data |
| BS ISO 15022-1-1999 |
證券.文電圖解(數據區字典).數據區和文電設計規則和導則 |
Securities - Scheme for messages (data field dictionary) - Data field and message design rules and guidelines |
| BS ISO 15022-2-1999 |
證券.文電圖解(數據區字典).數據區字典和文電目錄的維護. |
Securities - Scheme for messages (data field dictionary) - Maintenance of the data field dictionary and catalogue of messages |
| BS ISO 15023-1-2002 |
塑料.聚乙烯醇材料.名稱與符號系統和基本規范 |
Plastics - Poly(vinyl alcohol) (PVAL) materials - Designation system and basis for specifications |
| BS ISO 15023-2-2003 |
塑料.聚乙烯醇(PVAL)材料.特性的測定 |
(Plastics - Poly(vinyl alcohol) (PVAL) materials - Determination of properties) |
| BS ISO 15024-2002 |
纖維增強塑料復合材料.無方向性增強材料的模式I層間斷裂韌性(UPGIC)的測定 |
Fibre-reinforced plastic composites - Determination of mode I interlaminar fracture toughness, GDOWNiDOWNc, for unidirectionally reinforced materials |
| BS ISO 15032-2000 |
修復術.髖關節結構試驗 |
Prostheses - Structural testing of hip joints |
| BS ISO 15033-2000 |
塑料.用高效液相色譜分析法測定己內酰胺及其周期和線性集聚物 |
Plastics - Determination of caprolactam and its cyclic and linear oligomers by HPLC |
| BS ISO 15034-2000 |
化合物.預浸料坯.樹脂流動的測定 |
Composites - Prepregs - Determination of resin flow |
| BS ISO 15037-1-1999 |
道路車輛.車輛動力學試驗方法.第1部分:客車的一般條件 |
Road vehicles - Vehicle dynamics test methods - General conditions for passenger cars |
| BS ISO 15037-2-2003 |
道路車輛.車輛動力學試驗方法.重型車輛和公共汽車的一般條件 |
Road vehicles - Vehicle dynamics test methods - General conditions for heavy vehicles and buses |
| BS ISO 15038-1999 |
塑料.不飽和聚酯熱固材料的有機聚酯交聯劑.活性氧含量的測定 |
Plastics - Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials - Determination of active-oxygen content |
| BS ISO 15040-2000 |
復合物.預浸料坯.膠凝時間的測定 |
Composites - Prepregs - Determination of gel time |
| BS ISO 1505-1993 |
紡織機械.染整設備的有關寬度.額定寬度范圍和定義 |
Textile machinery - Widths relating to dyeing and finishing machines - Definitions and range of nominal widths |
| BS ISO 15072-2000 |
帶有米制細牙螺紋法蘭的六角螺栓.小型系列.產品等級A |
Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A |
| BS ISO 15078-1998 |
林業機械.原木裝載機.雙層駕駛員控制的操作方法和位置 |
Machinery for forestry - Log loaders - Location and method of operation of two-lever operator controls |
| BS ISO 15086-1-2001 |
液力傳動.件和系統中液載噪音特性的測定.說明 |
Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Hydraulic fluid power - Determination of the fluid borne noise characteristics of components and systems - Introduction |
| BS ISO 15086-2-2000 |
液壓動力.件和系統中液載噪音特性的測定.管道液流中聲音速度的測量 |
Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Measurement of speed of sound in a fluid in a pipe |
| BS ISO 15100-2001 |
塑料.增強纖維.短切原絲.松密度的測定 |
Plastics - Reinforcement fibres - Chopped strands - Determination of bulk density |
| BS ISO 15105-1-2002 |
塑料.薄模和薄模紙.用壓差法測定氣體穿透率 |
Plastics - Film and sheeting - Determination of gas-transmission rate - Differential-pressure method |
| BS ISO 15105-2-2003 |
塑料.薄膜和片材.氣體傳輸率的測定.等壓法 |
(Plastics - Film and sheeting - Determination of gas-transmission rate - Equal-pressure method) |
| BS ISO 15113-2000 |
橡膠.摩擦特性的測定 |
Rubber - Determination of frictional properties |
| BS ISO 15117-1-2004 |
煤流動性.料斗抖動 |
|
| BS ISO 15142-1-2003 |
外科植入物.金屬髓內插釘系統.髓內插釘 |
(Implants for surgery - Metal intramedullary nailing systems - Intramedullary nails) |
| BS ISO 15142-2-2003 |
外科植入物.金屬髓內插釘系統.鎖定件 |
(Implants for surgery - Metal intramedullary nailing systems - Locking components) |
| BS ISO 15142-3-2003 |
外科植入物.金屬骨髓腔內插釘系統.連接設備和擴孔鉆直徑測量 |
(Implants for surgery - Metal intramedullary nailing systems - Connection devices and reamer diameter measurements) |
| BS ISO 15152-2003 |
煙草.用作煙堿的總生物堿含量的測定.續流分析法 |
(Tobacco - Determination of the content of total alkaloids as nicotine - Continuous-flow analysis method) |
| BS ISO 15153-2003 |
煙草.還原物質含量的測定.續流分析法 |
(Tobacco - Determination of the content of reducing substances - Continuous-flow analysis method) |
| BS ISO 15154-2003 |
煙草.還原的碳水化物含量的測定.續流分析法 |
(Tobacco - Determination of the content of reducing carbohydrates - Continuous-flow analysis method) |
| BS ISO 15161-2001 |
食品與飲料業用ISO 9001-2000的應用導則 |
Guidelines on the application of ISO 9001:2000 for the food and drink industry |
| BS ISO 15166-1-1998 |
膠粘劑.大塊樣品的準備方法.第1部分:由兩部分組成的系統 |
Adhesives - Methods of preparing bulk specimens - Two-part systems |
| BS ISO 15166-2-2001 |
膠粘劑.大塊樣品的準備方法.高溫處理一部分系統 |
Adhesives - Methods of preparing bulk specimens - Elevated-temperature-curing one-part systems |
| BS ISO 15169-2004 |
石油和液態石油產品.使用混合罐測量系統測定立式圓筒狀油罐中烴類的體積、密度和質量 |
|
| BS ISO 15171-1-1999 |
液壓和一般用途的連接.診斷用途的液壓耦合.壓力下非連接耦合 |
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Coupling not for connection under pressure |
| BS ISO 15171-2-2000 |
流體動力和通用連接器.鑒定目的用液壓聯軸器.加壓連接用端頭為M16×2的聯軸器 |
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Coupling with M16 x 2 end for connection under pressure |
| BS ISO 15175-2004 |
土質.與地下水保護有關的土壤的表征 |
|
| BS ISO 15176-2002 |
土壤質量.挖掘土壤和要求再利用的其他土壤特征 |
Soil quality - Characterization of excavated soil and other soil materials intended for re-use |
| BS ISO 15186-1-2000 |
聲學.建筑物隔聲測量和用聲強測量建筑部件.實驗室條件 |
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Laboratory conditions |
| BS ISO 15186-2-2003 |
聲學.用聲強作建筑物和建筑構件的隔聲測量.現場測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Field measurements) |
| BS ISO 15186-3-2002 |
聲學.利用聲強度測量建筑物和建筑部件的隔音情況.低頻實驗室測量 |
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Laboratory measurements at low frequencies |
| BS ISO 15188-2001 |
術語標準化項目管理指南 |
Project management guidelines for terminology standardization |
| BS ISO 15190-2003 |
醫學實驗室.安全要求 |
(Medical laboratories - Requirements for safety) |
| BS ISO 15198-2004 |
臨床實驗室醫學.體外診斷醫療裝置.生產商驗證的用戶質量控制規程 |
|
| BS ISO 15198-2004 |
臨床實驗室藥物.體外診斷醫療設備.由制造商證實的用戶質量控制程序 |
|
| BS ISO 15202-1-2000 |
工作場所空氣.用感應耦合等離子體原子發射光譜法對氣載顆粒物質中金屬和非金屬的測定.取樣 |
Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Sampling |
| BS ISO 15202-2-2005 |
工作場所空氣.用感應耦合等離子體原子發射光譜法測定氣載顆粒物質中的金屬和準金屬.樣品制備 |
|
| BS ISO 15202-2-2005 |
工作場所空氣.用感應耦合等離子體原子發射光譜法測定氣載顆粒物質中的金屬和準金屬.樣品制備 |
|
| BS ISO 15202-3-2004 |
工作場所空氣.用感應耦合等離子體原子發射光譜法測定氣載顆粒物質中的金屬和類金屬物.分析 |
|
| BS ISO 15213-2003 |
食品和動物飼料的微生物學.計算厭氧條件下用亞硫酸鹽抑制細菌生長的水平法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions) |
| BS ISO 15214-1998 |
食品和動物飼料的微生物學.適溫性乳酸菌的水平計數法.30℃的菌落計數技術 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of mesophilic lactic acid bacteria - Colony-count technique at 30 鳦 |
| BS ISO 15217-2001 |
液壓傳動系統和件.16平方毫米接地接點電連接器.特性和要求 |
Fluid power systems and components - 16mm square electrical connector with earth contact - Characteristics and requirements |
| BS ISO 15218-2003 |
氣液傳動.3/2電磁閥.安裝接口表面 |
Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces |
| BS ISO 15227-2000 |
光學和光學儀器.顯微鏡.立體可視顯微鏡試驗 |
Optics and optical instruments - Microscopes - Testing of stereomicroscopes |
| BS ISO 15237-2003 |
固體礦物燃料.煤中汞的總含量測定 |
(Solid mineral fuels - Determination of total mercury content of coal) |
| BS ISO 15238-2003 |
固體礦物燃料.煤中鎘的總含量測定 |
(Solid mineral fuels - Determination of total cadmium content of coal) |
| BS ISO 15242-1-2004 |
滾動軸承.振動測量方法.基本原則 |
|
| BS ISO 15243-2004 |
滾動軸承.損害和故障.術語、特性和成因 |
|
| BS ISO 15261-2004 |
振動和沖擊發生系統.詞匯 |
|
| BS ISO 15303-2001 |
動植物脂肪和油.GC/MS法檢測和識別揮發性有機雜質 |
Animal and vegetable fats and oils - Detection and identification of a volatile organic contaminent by GC/MS |
| BS ISO 15310-2000 |
纖維增強的塑料化合物.用板彎曲方法測定面內剪切模量 |
Reinforced plastics - Determination of the in-plane shear modulus by the plate twist method |
| BS ISO 15312-2004 |
滾動軸承.熱速額定值.計算和系數 |
|
| BS ISO 15314-2005 |
塑料.海上曝光法 |
|
| BS ISO 15319-2001 |
再生紙漿.用反射光儀器法評價可視原料中的雜質 |
Recycled pulps - Estimation of visible contraries by instrumental means using reflected light |
| BS ISO 15323-2002 |
奶粉蛋白質產品.氮溶解率測定 |
Dried milk protein products - Determination of nitrogen solubility index |
| BS ISO 15324-2001 |
金屬和合金的腐蝕.用滴水蒸發試驗評價應力腐蝕裂紋 |
Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test |
| BS ISO 15350-2001 |
鋼鐵.碳和硫總含量的測定.感應爐中燃燒后的紅外線吸收法(常規法) |
Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) |
| BS ISO 15359-2000 |
紙和紙板.摩擦系數的靜態和動態測定.水平面法 |
Paper and board - Determination of the static and kinetic coefficients of friction - Horizontal plane method |
| BS ISO 15360-1-2001 |
再生紙漿.粘性和塑性的估測.外觀檢查法 |
Recycled pulps - Estimation of stickies and plastics - Visual method |
| BS ISO 15361-2001 |
紙漿.在濕潤或干燥的條件下測定零距抗張強度 |
Pulps - Determination of zero-span tensile strength, wet or dry |
| BS ISO 15364-2000 |
船舶技術.貨船用壓力/真空閥 |
Ships and marine technology. Pressure/vacuum valves for cargo tanks |
| BS ISO 15368-2001 |
光學和光學儀器.平面的反射系數的測定和平行板透射率的測定 |
Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements |
| BS ISO 15370-2004 |
船舶與海上技術.客輪的低位照明.布局 |
|
| BS ISO 15370-2004 |
船舶與海上技術.客輪的低位照明.布局 |
|
| BS ISO 15371-2000 |
船舶技術.船上廚房的深油烹飪設備保護用滅火系統.著火試驗 |
Ships and marine technology - Fire-extinguishing systems for protection of galley deep-fat cooking equipment - Fire tests |
| BS ISO 15372-2003 |
船舶與海上技術.充氣式救生艇.充氣室用漆布 |
(Ships and marine technology - Inflatable rescue boats - Coated fabrics for inflatable chambers) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com