標準號 |
中文名稱 |
英文名稱 |
| BS 1041-3-1989 |
溫度測量.第3部分:工業用電阻溫度計的選擇和使用指南 |
(Temperature measurement - Guide to selection and use of industrial resistance thermometers) |
| BS 1041-4-1992 |
溫度測量.熱電偶選擇和使用指南 |
(Temperature measurement - Guide to the selection and use of thermocouples) |
| BS 1041-5-1990 |
溫度測量.第5部分:輻射高溫計選擇和使用指南 |
(Temperature measurement - Guide to selection and use of radiation pyrometers) |
| BS 1041-7-1988 |
溫度測量.第7部分:溫度/時間指示器的選擇和使用指南 |
(Temperature measurement - Guide to selection and use of temperature/time indicators) |
| BS 1042-1.4-1992 |
封閉管道內液體流量的測量.第1部分:壓差器件.第4節:第1和2節所述器件的使用指南 |
(Measurement of fluid flow in closed conduits - Pressure differential devices - Guide to the use of devices specified in Sections 1.1 and 1.2) |
| BS 1042-2.1-1983 |
封閉管道內液體流量的測量.第2部分:速度面積法.第1節:采用皮托靜壓管的方法 |
(Measurement of fluid flow in closed conduits - Velocity area methods - Method using Pitot static tubes) |
| BS 1042-2.2-1983 |
封閉管道內液體流量的測量.第2部分:速度面積法.第2節:圓形截面管道中某一點的流速測量方法 |
(Measurement of fluid flow in closed conduits - Velocity area methods - Method of measurement of velocity at one point of a conduit of circular cross section) |
| BS 1042-2.3-1984 |
封閉管道內液體流量的測量.第2部分:速度面積法.第3節:用流量計或皮托靜壓管在圓形管道中的渦流或不平衡流動 |
(Measurement of fluid flow in closed conduits - Velocity area methods - Methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot stati) |
| BS 1042-2.4-1989 |
封閉管道內液體流量的測量.第2部分:速度面積法.第4節:在正常流動條件下利用全流動導管中的流量計測量清潔水 |
(Measurement of fluid flow in closed conduits - Velocity area methods - Method of measurement of clean water flow using current meters in full conduits and under regular flow conditions) |
| BS 1044-1-1964 |
量規坯件規范.塞規、環規與卡規 |
(Specificaton for gauge blanks - Plug, ring and calliper gauges) |
| BS 105-1919 |
輕型和重型橋梁式鐵路鋼軌 |
(Light and heavy bridge type railway rails) |
| BS 1050-1984 |
通訊設備用和類似用途的指示燈規范 |
(Specification for indicator lamps for use in telecommunication apparatus and for allied purposes) |
| BS 1051-1992 |
有關紡織品質量測定的術語詞匯 |
(Glossary of terms relating to the mass determination of textiles) |
| BS 1052-1980 |
一般工程用的低碳鋼絲規范 |
(Specification for mild steel wire for general engineering purposes) |
| BS 1054-1975 |
外部測量用工程比較儀規范 |
(Specification for engineers’ comparators for external measurement) |
| BS 1070-1993 |
黑漆(焦油漆)規范 |
(Specification for black paint (tar-based)) |
| BS 1083-1965 |
精密六角螺拴、螺釘與螺母(B.S.W和B.S.F 螺紋)規范 |
(Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads)) |
| BS 1088-1-2003 |
船用膠合板.要求 |
(Marine plywood - Requirements) |
| BS 1088-2-2003 |
船用膠合板.用刀齒試驗測定粘結質量 |
(Marine plywood - Determination of bonding quality using the knife test) |
| BS 1089-1973 |
外圓、內圓與萬能磨床用轉盤軸頭規范 |
(Specification for workhead spindle noses for grinding machines: cylindrical external, internal and universal types) |
| BS 1090-1970 |
礦用手持式防火電動鉆機規范 |
(Specification for flameproof hand-held electric drilling machines primarily for use in mines) |
| BS 1098-2-1976 |
鉆套規范.米制件 |
(Specification for jig bushes - Metric units) |
| BS 1101-1977 |
涂料和其他類似物質用壓力容器規范 |
(Specification for pressure containers for paint and other similar substances) |
| BS 1103-1989 |
橡膠軟管加固用織物的規范 |
(Specification for fabrics for the reinforcement of rubber hoses) |
| BS 1104-1957 |
一般用梯形螺紋規范 |
(Specification for general purpose Acme screw threads) |
| BS 1109-1943 |
冷密接用冷鍛低碳鋼鉚釘規范 |
(Specification for cold forged mild steel rivets for cold closing) |
| BS 1117-2-1964 |
精密電氣設備用裸細電阻絲規范.第2部分:米制件 |
(Specification for bare fine resistance wire for precision electrical equipment - Metric units) |
| BS 1123-1-1987 |
壓縮空氣或惰性氣體裝置用安全閥、計量表和易熔塞.第1部分:安裝實用規程 |
(Safety valves, gauges and fusible plugs for compressed air or inert gas installations - Code of practice for installation) |
| BS 1125-1987 |
廁所沖洗水箱(包括兩用沖洗水箱與沖洗管)規范 |
(Specification for WC flushing cisterns (including dual flush cisterns and flush pipes)) |
| BS 1127-1-1990 |
螺絲板牙和螺母狀板牙.第1部分:手用和機用圓形螺絲板牙和手用板牙柄規范 |
(Screwing dies and dienuts - Specification for hand- and machine-operated circular screwing dies and hand-operated die stocks) |
| BS 1127-2-1990 |
螺絲板牙和螺母狀板牙.手用和機用錐形管螺紋用圓形螺絲板牙規范;R系列 |
(Screwing dies and dienuts - Specification for hand- and machine-operated circular screwing dies for taper pipe threads; R Series) |
| BS 1127-3-1990 |
螺絲板牙和螺母狀板牙.手用和機器操作平行管螺紋用圓形螺絲板牙規范;G系列 |
(Screwing dies and dienuts - Specification for hand- and machine-operated circular screwing dies for parallel pipe threads; G series) |
| BS 1127-4-1990 |
螺絲板牙和螺母狀板牙.圓形螺絲板牙術語 |
(Screwing dies and dienuts - Terminology for circular screwing dies) |
| BS 1127-5-1990 |
螺絲板牙和螺母狀板牙.六角形螺母狀板牙尺寸規范 |
(Screwing dies and dienuts - Specification for dimensions of hexagon dienuts) |
| BS 1132-1987 |
自動移液管規范 |
(Specification for automatic pipettes) |
| BS 1133 Secs.1 to 3-1989 |
包裝規程.第1-3節:包裝導論 |
(Packaging code - Introduction to packaging) |
| BS 1133-10.1-1990 |
包裝規程.第10節:金屬容器.第1小節:馬口鐵制容器和罐、盒、桶等 |
(Packaging code - Metal containers - Tins and cans) |
| BS 1133-10.2-1991 |
包裝規程.第10節:金屬容器.第2小節:鐵桶 |
(Packaging code - Metal containers - Metal drums) |
| BS 1133-12-1986 |
包裝規程.第12節:防震方法(減震裝置除外) |
(Packaging code - Methods of protection against shock (excluding cushioning devices)) |
| BS 1133-14-1985 |
包裝規程.膠粘結合和密封帶 |
(Packaging code - Adhesive closing and sealing tapes) |
| BS 1133-15-1991 |
包裝規程.第15節:包裝帶 |
(Packaging code - Tensional strapping) |
| BS 1133-16-1987 |
包裝規程.第16節:包裝用粘膠劑 |
(Packaging code - Adhesives for packaging) |
| BS 1133-18-1991 |
包裝規程.第18節:玻璃包裝 |
(Packaging code - Packaging in glass) |
| BS 1133-19-1986 |
包裝規程.包裝中使用的干燥劑 |
(Packaging code - Use of desiccants in packaging) |
| BS 1133-1986 |
包裝規程.第19節:包裝中干燥劑的使用 |
(Packaging code. Use of desiccants in packaging) |
| BS 1133-21-1991 |
包裝規程.第21節:再生纖維素薄膜,塑料薄膜,鋁箔,撓性多層板和金屬化材料 |
(Packaging code - Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials) |
| BS 1133-22-1989 |
包裝規程.第22節:塑料容器包裝 |
(Packaging code - Packaging in plastics containers) |
| BS 1133-4-1991 |
包裝規程.包裝件搬運的機械設備 |
(Packaging code - Mechanical aids in package handling) |
| BS 1133-5-1985 |
包裝規程.第5節:防止微生物、昆蟲、蜱螨和嚙齒動物對包裝及其內裝物品的損壞 |
(Packaging code - Protection against spoilage of packages and their contents by micro-organisms, insects, mites and rodents) |
| BS 1133-6.1-1991 |
包裝規程.第6節:防運輸中腐蝕的金屬表面的保護.第1小節:金屬表面的凈化與干燥 |
(Packaging code - Protection of metal surfaces against corrosion during transport and storage - Cleaning and drying of metal surfaces) |
| BS 1133-6.2-1991 |
包裝規程.第6節:防運輸中腐蝕的金屬表面的保護.第2小節:臨時保護劑及其應用 |
(Packaging code - Protection of metal surfaces against corrosion during transport and storage - Temporary protectives and their application) |
| BS 1133-7.1-1986 |
包裝規程.紙和紙板封皮、袋和容器.包裝紙 |
(Packaging code - Paper and board wrappers, bags and containers - Wrapping papers) |
| BS 1133-7.2-1986 |
包裝規程.紙和紙板封皮、袋和容器.袋和封皮 |
(Packaging code - Paper and board wrappers, bags and containers - Bags and envelopes) |
| BS 1133-7.3-1986 |
包裝規程.紙和紙板封皮、袋和容器.紙板箱和盒 |
(Packaging code - Paper and board wrappers, bags and containers - Cartons and boxes) |
| BS 1133-7.4-1990 |
包裝規程.紙和紙板封皮、袋和容器.纖維板卷筒 |
(Packaging code - Paper and board wrappers, bags and containers - Fibreboard drums) |
| BS 1133-7.5-1991 |
包裝規程.紙和紙板包裝、袋及容器.纖維板箱和附件 |
(Packaging code - Paper and board wrappers, bags and containers - Fibreboard cases and fitments) |
| BS 1133-7.6-1988 |
包裝規程.第7節:紙和紙板封皮、袋和容器.第6小節:模制紙漿包裝 |
(Packaging code - Paper and board wrappers, bags and containers - Moulded pulp packaging) |
| BS 1133-7.7-1990 |
包裝規程.第7節:紙和紙板封皮、袋和容器.第7小節:組合容器 |
(Packaging code - Paper and board wrappers, bags and containers - Composite containers) |
| BS 1133-8-1991 |
包裝規范.第8節:木箱、木盒和木筐 |
(Packaging code - Wooden boxes, cases and crates) |
| BS 1134-1-1988 |
表面紋理的評定.方法和儀器 |
(Assessment of surface texture - Methods and instrumentation) |
| BS 1134-2-1990 |
表面紋理的評定.第2部分:導則和一般介紹 |
(Assessment of surface texture - Guidance and general information) |
| BS 1136-1972 |
低碳鋼垃圾箱規范 |
(Specification for mild steel refuse storage containers) |
| BS 1139-1.2-1990 |
金屬腳手架.第1部分:管.第2節:鋁管規范 |
(Metal scaffolding - Tubes - Specification for aluminium tube) |
| BS 1139-2.1-1991 |
金屬腳手架.第2部分:聯接件.第1節:鋼管制操作用腳手架和膺架用的鋼聯接件松插口和底板的規范 |
(Metal scaffolding - Couplers - Specification for steel couplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes) |
| BS 1139-2.2-1991 |
金屬腳手架.第2部分:聯接件.第2節:管式腳手架中用的鋼的和鋁的聯接件、配件和附件的規范 |
(Metal scaffolding - Couplers - Specification for steel and aluminium couplers, fittings and accessories for use in tubular scaffolding) |
| BS 1139-3-1994 |
金屬腳手架.預制通路和施工塔架規范 |
(Metal scaffolding - Specification for prefabricated mobile access and working towers) |
| BS 1139-4-1982 |
金屬腳手架.第4部分:預制鋼叉架和棧橋 |
(Metal scaffolding - Specification for prefabricated steel splitheads and trestles) |
| BS 1139-5-1990 |
金屬腳手架.第5部分:由預制部件組成的服務和操作用腳手架的材料、尺寸、設計負荷與安全要求規范 |
(Metal scaffolding - Specification for materials, dimensions, design loads and safety requirements for service and working scaffolds made of prefabricated elements) |
| BS 1140-1993 |
有鍍層和無鍍層低碳鋼電阻點焊規范 |
(Specification for resistance spot welding of uncoated and coated low carbon steel) |
| BS 115-1995 |
電氣用金屬電阻材料規范 |
(Specification for metallic resistance materials for electrical purposes) |
| BS 1153-1992 |
明膠合銀型縮微膠片的沖洗和貯存的推薦方法 |
(Recommendations for processing and storage of silver-gelatine-type microfilm) |
| BS 1154-2003 |
天然橡膠化合物規范 |
(Natural rubber compounds - Specification) |
| BS 1155-2003 |
擠壓用天然橡膠化合物規范 |
(Natural rubber compounds for extrusion - Specification) |
| BS 1157-1975 |
槽紋用絲錐用螺紋底孔鉆頭尺寸推薦標準 |
(Recommendations for tapping drill sizes for use with fluted taps) |
| BS 1161-1977 |
結構用鋁合金型材規范 |
(Specification for aluminium alloy sections for structural purposes) |
| BS 1170-1983 |
船用鍋爐的水處理推薦標準 |
(Recommendations for treatment of water for marine boilers) |
| BS 1179-6-1980 |
燃?xì)夤I(yè)用術語詞匯.第6部分:包括用戶燃?xì)庋b置在內的煤氣燃燒和利用 |
(Glossary of terms used in the gas industry - Combustion and utilization including installation at consumers’ premises) |
| BS 1181-1999 |
粘土煙道端頭規范 |
(Specification for clay flue terminals) |
| BS 1184-1976 |
銅與銅合金存水彎規范 |
(Specification - Copper and copper alloy traps) |
| BS 1186-2-1988 |
細木工用木材與制品質量.第2部分:制品質量規范 |
(Timber for and workmanship in joinery - Specification for workmanship) |
| BS 1186-3-1990 |
細木工用木材與制品質量.第3部分:木裝飾物及其固定規范 |
(Timber for and workmanship in joinery - Specification for wood trim and its fixing) |
| BS 1187-1959 |
地板用木塊規范 |
(Specification for wood blocks for floors) |
| BS 1188-1974 |
陶瓷盥洗盆與臺座規范 |
(Specification for ceramic wash basins and pedestals) |
| BS 1191-1-1973 |
建筑用石膏粉飾規范.第1部分:不包括預拌輕質石膏 |
(Specification for gypsum building plasters - Excluding premixed lightweight plasters) |
| BS 1191-2-1973 |
建筑用石膏粉飾規范.第2部分:預拌輕質石膏 |
(Specification for gypsum building plasters - Premixed lightweight plasters) |
| BS 1192-5-1998 |
建筑制圖.計算機輔助設計(CAD)數據的結構和交換導則 |
(Construction drawing practice - Guide for structuring and exchange of CAD data) |
| BS 1196-1989 |
田間排水用陶土管及連接管規范 |
(Specification for clayware field drain pipes and junctions) |
| BS 1197-2-1973 |
混凝土鋪地磚和配件規范.第2部分:米制件 |
(Specification for concrete flooring tiles and fittings - Metric units) |
| BS 1202-1-2002 |
釘子規范.鋼釘 |
(Specification for nails - Steel nails) |
| BS 1202-2-1974 |
釘子規范.第2部分:銅釘 |
(Specification for nails - Copper nails) |
| BS 1202-3-1974 |
釘子規范.第3部分:鋁釘 |
(Specification for nails - Aluminium nails) |
| BS 1203-2001 |
熱固酚醛和氨基塑料木材膠粘劑.分類和試驗方法 |
(Hot-setting phenolic and aminoplastic wood adhesives - Classification and test method) |
| BS 1206-1974 |
耐火粘土質洗滌池規范.尺寸與加工質量 |
(Specification for fireclay sinks: dimensions and workmanship) |
| BS 1210-1963 |
木螺釘規范 |
(Specification for wood screws) |
| BS 1212-1-1990 |
浮子閥.第1部分:活塞型浮子閥(銅合金閥體)(不含浮子)規范 |
(Float operated valves - Specification for piston type float operated valves (copper alloy body) (excluding floats)) |
| BS 1212-2-1990 |
浮子閥.第2部分:隔膜型浮子閥(銅合金閥體)(不含浮子)規范 |
(Float operated valves - Specification for diaphragm type float operated valves (copper alloy body) (excluding floats)) |
| BS 1212-3-1990 |
浮子閥.第3部分:僅供冷水用隔膜型塑料體浮子操作閥(不包括浮子) |
(Float operated valves - Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats)) |
| BS 1212-4-1991 |
浮子閥.第4部分:廁所沖水箱用小型浮子閥規范(包含浮子) |
(Float operated valves - Specification for compact type float operated valves for WC flushing cisterns (including floats)) |
| BS 1214-1977 |
打包麻布砂袋與防霉打包麻布砂袋規范 |
(Specification for hessian sandbags and rot-proofed hessian sandbags) |
| BS 1217-1997 |
鑄石規范 |
(Specification for cast stone) |
| BS 122-1-1953 |
銑刀.第1部分:銑刀 |
(Milling cutters - Milling cutters) |
| BS 122-4-1980 |
銑刀.螺紋柄端銑刀和槽鉆 |
(Milling cutters - Screwed shank end mills and slot drills) |
| BS 122-5-1986 |
銑刀.第5部分:安裝尺寸和附件規范 |
(Milling cutters - Specification for mounting dimensions and accessories) |
| BS 122-6-1995 |
銑刀.銑刀桿或銑刀芯軸的互換性尺寸規范 |
(Milling cutters - Specification for dimensions for interchangeability of cutter arbors and cutter mandrels) |
| BS 1230-1-1985 |
石膏灰泥板.第1部分:不適于作為二次加工材料的灰泥板規范 |
(Gypsum plasterboard - Specification for plasterboard excluding materials submitted to secondary operations) |
| BS 123000-2001 |
質量評估體系.總規范.印制板 |
(System of quality assessment - Generic specification - Printed boards) |
| BS 123100-003-2001 |
質量評估體系.性能的詳細規范.有光孔的剛性單面和雙面印制板 |
(System of quality assessment - Capability detail specification - Rigid single-sided and double-sided printed boards with plain holes) |
| BS 123100-2001 |
質量評估體系.分規范.有光孔的剛性單面和雙面印制板 |
(System of quality assessment - Sectional specification - Rigid single-sided and double-sided printed boards with plain holes) |
| BS 123200-003-2001 |
質量評估體系.性能的詳細規范.有鍍通孔的剛性雙面印制板 |
(System of quality assessment - Capability detail specification - Rigid double-sided printed boards with plated-through holes) |
| BS 123200-2001 |
質量評估體系.分規范.有鍍通孔的剛性雙面印制板 |
(System of quality assessment - Sectional specification - Rigid double-sided printed boards with plated-through holes) |
| BS 123300-003-2001 |
質量評估體系.性能的詳細規范.剛性多層印制板 |
(System of quality assessment - Capability detail specification - Rigid multilayer printed boards) |
| BS 123300-2001 |
質量評估體系.分規范.剛性多層印制板 |
(System of quality assessment - Sectional specification - Rigid multilayer printed boards) |
| BS 123400-003-2001 |
質量評估體系.性能的詳細規范.無貫穿連接的撓性單面和雙面印制板 |
(System of quality assessment - Capability detail specification - Flexible single-sided and double-sided printed boards without through-connections) |
| BS 123400-2001 |
質量評估體系.分規范.無貫穿連接的撓性單面和雙面印制板 |
(System of quality assessment - Sectional specification - Flexible single-sided and double-sided printed boards without through-connections) |
| BS 123500-003-2001 |
質量評估體系.性能的詳細規范.貫穿連接的撓性單面和雙面印制板 |
(System of quality assessment - Capability detail specification - Flexible Single-sided and double-sided printed boards with through-connections) |
| BS 123500-2001 |
質量評估體系.分規范.貫穿連接的撓性單面和雙面印制板 |
(System of quality assessment - Sectional specification - Flexible single-sided and double-sided printed boards with through-connections) |
| BS 123600-003-2001 |
質量評估體系.性能的詳細規范.貫穿連接的軟-硬性多層印制板 |
(System of quality assessment - Capability detail specification - Flex-rigid multilayer printed boards with through-connections) |
| BS 123600-2001 |
質量評估體系.分規范.貫穿連接的軟-硬性多層印制板 |
(System of quality assessment - Sectional specification - Flex-rigid multilayer printed boards with through-connections) |
| BS 123700-003-2001 |
質量評估體系.性能的詳細規范.貫穿連接的軟-硬性雙面印制板 |
(System of quality assessment - Capability detail specification - Flex-rigid double-sided printed boards with through-connections) |
| BS 123700-2001 |
質量評估體系.分規范.貫穿連接的軟-硬性雙面印制板 |
(System of quality assessment - Sectional specification - Flex-rigid double-sided printed boards with through-connections) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com