標準號 |
中文名稱 |
英文名稱 |
| BS EN 61249-2-5-2004 |
印制板和其他互聯結構用材料.包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的溴化環氧纖維素紙?jiān)鰪?qiáng)芯/編織的E型玻璃纖維增強表面層壓板 |
|
| BS EN 61249-2-5-2004 |
互聯結構用材料.包被和非包被增強基材的分規范集.阻燃型(垂直燃燒試驗)銅包被的溴化環氧纖維素紙?jiān)鰪?qiáng)芯/編織的E型玻璃纖維增強表面層壓板 |
|
| BS EN 61249-2-5-2004 |
互聯結構用材料.包被和非包被增強基材的分規范集.阻燃型(垂直燃燒試驗)銅包被的溴化環氧纖維素紙?jiān)鰪?qiáng)芯/編織的E型玻璃纖維增強表面層壓板 |
|
| BS EN 61249-2-6-2004 |
印制板和其他互聯結構用材料.包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的溴化環氧非編織/編織的E型玻璃纖維增強層壓板 |
|
| BS EN 61249-2-6-2004 |
互聯結構用材料.包被和非包被增強基材分規范集.阻燃型(垂直燃燒試驗)銅包被的溴化環氧非編織/編織的E型玻璃纖維增強表面層壓板 |
|
| BS EN 61249-2-6-2004 |
互聯結構用材料.包被和非包被增強基材分規范集.阻燃型(垂直燃燒試驗)銅包被的溴化環氧非編織/編織的E型玻璃纖維增強層壓板 |
|
| BS EN 61249-2-7-2002 |
互連結構材料.包被和非包被的加強基質材料的分規范.阻燃環氧衍生物疊層板材.銅包被 |
(Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning) |
| BS EN 61249-2-8-2003 |
互連結構用材料.包被和非包被增強基材分規范.包被和非包被增強基材.規定了易燃性的包銅改良溴化環氧編織玻 |
() |
| BS EN 61249-2-9-2003 |
互連結構用材料.包被和非包被增強基材分規范.包被和非包被增強基材.規定了易燃性的包銅二順丁烯二酰亞胺/三 |
() |
| BS EN 61249-3-3-1999 |
互聯結構材料.包被和非包被的非加強基質材料的分規范(用于柔軟印制板的).粘膠包被的柔軟聚酯膜 |
(Materials for interconnection structures - Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyester film) |
| BS EN 61249-3-4-1999 |
互聯結構材料.包被和非包被的非加強基質材料的分規范(用于柔軟印制板的).粘膠包被的柔軟聚酰亞胺膜 |
(Materials for interconnection structures - Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyimide film) |
| BS EN 61249-3-5-1999 |
連接結構用材料.增強的涂覆和未涂覆材料分規范組.撓性印制板用傳熱粘附膜 |
(Materials for interconnection structures - Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Transfer adhesive films for flexible pr) |
| BS EN 61249-5-1-1996 |
連接結構用材料.第5部分:帶和不帶涂層的導電箔和薄膜的分規范.第1節:銅箔(用于生產銅涂覆基材) |
(Materials for interconnection structures - Sectional specification set for conductive foils and films with and without coatings - Copper foils (for the manufacture of copper-clad base materials)) |
| BS EN 61249-5-4-1997 |
內部連接結構用材料.有或無涂層的導電箔和導電薄膜分規范.導電墨水 |
(Materials for interconnection structures - Sectional specification set for conductive foils and films with and without coatings - Conductive inks) |
| BS EN 61249-7-1-1996 |
互連接裝置用材料.第7部分:芯約束用材料分規范.第1節:銅/殷鋼/銅 |
(Materials for interconnection structures - Sectional specification set for restraining core materials - Copper/invar/copper) |
| BS EN 61249-8-7-1997 |
互連接結構用材料.非導電薄膜和涂層分規范.打印油墨 |
(Materials for interconnection structures - Sectional specification set for non-conductive films and coatings - Marking legend inks) |
| BS EN 61249-8-8-1997 |
連接結構用材料.非導電膜和涂層部分規范.臨時聚合物規范 |
(Materials for interconnection structures - Sectional specification set for non-conductive films and coatings - Temporary polymer coatings) |
| BS EN 61254-1994 |
家用電動剃須刀.性能測量方法 |
(Electric shavers for household use - Methods for measuring the performance) |
| BS EN 61255-1995 |
家用電熱毯.性能測量方法 |
(Household electric heating pads - Methods for measuring performance) |
| BS EN 61260-1996 |
電聲學.分倍頻程頻帶和頻程頻帶用倍頻濾波器 |
(Electroacoustics - Octave-band and fractional-octave-band filters) |
| BS EN 61262-1-1995 |
醫療電氣設備.電光X射線圖象增強器的特性.第1部分:入口尺寸的測定 |
(Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment - Determination of the entrance field size) |
| BS EN 61262-2-1995 |
醫療電氣設備用電光X射線圖像增強器的特性.換算因子的測定 |
(Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment - Determination of the conversion factor) |
| BS EN 61262-3-1995 |
醫療電氣設備用電光X射線圖像增強器的特性.亮度分布和不一致性的測定 |
(Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment - Determination of the luminance distribution and luminance non-uniformity) |
| BS EN 61262-4-1995 |
醫療電氣設備X射線圖像增強儀的電光特性.圖像失真的測定 |
(Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment - Determination of the image distortion) |
| BS EN 61262-5-1995 |
電光X射線圖象增強器的特性. |
(Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment - Determination of the detective quantum efficiency) |
| BS EN 61262-6-1995 |
醫療電氣設備.電光X射線圖象增強器的特性.第6部分:對比率和雜光指數的測定 |
(Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment - Determination of the contrast ratio and veiling glare index) |
| BS EN 61262-7-1996 |
醫療電氣設備.電光X射線圖象增強器的特性.第7部分:調制變壓器的函數 |
(Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment - Determination of the modulation transfer function) |
| BS EN 61265-1995 |
電聲學.航空噪聲測量說明.運輸機噪聲檢定測量三分之一帶寬倍頻聲壓級裝置的性能要求 |
(Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-categ) |
| BS EN 61266-1995 |
超聲波.手持式傳感式多普勒胎兒心跳探測儀.性能要求及測量和記錄方法 |
(Ultrasonics - Hand-held probe Doppler foetal heartbeat detectors - Performance requirements and methods of measurement and reporting) |
| BS EN 61267-1995 |
醫學診斷用X射線設備特性測定的輻射條件 |
(Radiation conditions for use in the determination of characteristics for medical diagnostic X-ray equipment) |
| BS EN 61269-1-1-1997 |
光纖端件.空白詳細規范 |
(Fibre optic terminus sets - Blank detail specification) |
| BS EN 61269-1-1997 |
光纖端件.總規范 |
(Fibre optic terminus sets - Generic specification) |
| BS EN 61270-1-1998 |
微波爐用電容器.總則 |
(Capacitors for microwave ovens - General) |
| BS EN 61274-1-1-1997 |
光纖適配器.空白詳細規范 |
(Fibre optic adaptors - Blank detail specification) |
| BS EN 61274-1-1997 |
光纖適配器.常規規范 |
(Fibre optic adaptors - Generic specification) |
| BS EN 61277-1998 |
地面光電功率發生裝置.總則和指南 |
(Terrestial photovoltaic (PV) power generating systems - General and guide) |
| BS EN 61280-1-1-1998 |
光纖放大器.基本光譜分析機.單模光纖電纜用發射機光輸出功率的測量 |
(Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable) |
| BS EN 61280-1-3-1999 |
光纖通信分系統基本試驗程序.一般通信分系統的試驗程序.中心波長和光譜寬度的測量 |
(Fibre optic communication subsystem basic test procedures - Test procedures for general communication subsystems - Central wavelength and spectral width measurement) |
| BS EN 61280-1-4-2003 |
光纖通信子系統基本試驗規程.一般通信子系統的試驗規程.多模纖維激光發射機用二維近場數據的采集和整理 |
(Fibre optic communication subsystem basic test procedures - Test procedures for general communication subsystems - Collection and reduction of two-dimensional nearfield data for multimode fibre laser) |
| BS EN 61280-2-1-1999 |
纖維光學通信系統基本試驗程序.數字系統試驗程序.接收機靈敏度和過載測量 |
(Fibre optic communication subsystem basic test procedures - Test procedures for digital systems - Receiver sensitivity and overload measurement) |
| BS EN 61280-2-2-1999 |
光纖通信子系統基本試驗程序.數字系統試驗程序.光學直視模型、波形和衰減比率 |
(Fibre optic communication subsystem basic test procedures - Test procedures for digital systems - Optical eye pattern, waveform, and extinction ratio) |
| BS EN 61280-2-2-2005 |
光纖通信子系統試驗程序.數字系統.光眼圖、波形和消光比測量 |
|
| BS EN 61280-2-4-1998 |
纖維光學通信系統基本試驗程序.數字系統試驗程序.容許位速率測量 |
(Fibre optic communication subsystem basic test procedures - Test procedures for digital systems - Bit-rate tolerance measurement) |
| BS EN 61280-2-5-1998 |
光纖通信子系統基本試驗程序.數字系統試驗程序.跳動傳輸功能測量 |
(Fibre optic communication subsystem basic test procedures - Test procedures for digital systems - Jitter transfer function measurement) |
| BS EN 61280-2-8-2003 |
光纖通信子系統基本試驗規程.數字系統的試驗規程.用品質因數測量法測定低位錯率 |
(Fibre optic communication subsystem basic test procedures - Test procedures for digital systems - Determination of low BER using Q-factor measurements) |
| BS EN 61280-2-9-2003 |
纖維光學通信子系統基本試驗程序.數字系統試驗規程.密集波長分區多層系統用光學信噪比的測量 |
(Fibre optic communication subsystem basic test procedures - Test procedures for digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems) |
| BS EN 61280-4-1-2004 |
纖維光學通信子系統基本試驗程序.光纜設施.多模光纜設施衰減測量 |
|
| BS EN 61280-4-1-2004 |
纖維光學通信子系統試驗程序.光纜設施和鏈路.多模光纜設施衰減測量 |
|
| BS EN 61280-4-1-2004 |
纖維光學通信子系統試驗程序.光纜設施和鏈路.多模光纜設施衰減測量 |
|
| BS EN 61280-4-2-2000 |
光纖通信分系統基本試驗程序.光纖電纜性能指標.單模光纖電纜性能指標的衰減 |
(Fibre optic communication subsystem basic test procedures - Fibre optic cable plant - Single-mode fibre optic cable plant attenuation) |
| BS EN 61281-1-1999 |
光纖通信子系統.一般規范 |
(Fibre optic communication subsystems - Generic specification) |
| BS EN 61284-1998 |
架空線.裝配要求和試驗 |
(Overhead lines - Requirements and tests for fittings) |
| BS EN 61285-1995 |
工業過程控制.分析器罩的安全 |
(Industrial-process control - Safety of analyser houses) |
| BS EN 61286-2002 |
信息技術.電工學中所用文獻的準備和信息交換用的編碼圖形字符集 |
(Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange) |
| BS EN 61290-1-1-1998 |
光譜分析儀 |
(Optical spectrum analyzer) |
| BS EN 61290-1-2-1998 |
光纖放大器.基本規范.獲得參數的試驗方法.電氣頻譜分析儀 |
(Optical fibre amplifiers - Basic specification - Test methods for gain parameters - Electrical spectrum analyzer) |
| BS EN 61290-1-3-1998 |
光纖放大器.基本光譜分析器.光強度計 |
(Optical fibre amplifiers.Basic spectrum analyzers - Optical power meter) |
| BS EN 61290-10-1-2003 |
光學纖維放大器.基礎規范.多道參數.使用光學開關和光譜分析儀的脈沖法 |
(Optical fibre amplifiers - Basic specification - Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer) |
| BS EN 61290-10-2-2003 |
光學纖維放大器.基礎規范.多道參數.選通光頻譜分析儀脈沖法 |
(Optical fibre amplifiers - Basic specification - Multichannel parameters - Pulse method using a gated optical spectrum analyzer) |
| BS EN 61290-10-3-2003 |
光學纖維放大器.基礎規范.多道參數.探測法 |
(Optical fibre amplifiers - Basic specification - Multichannel parameters - Probe methods) |
| BS EN 61290-11-1-2003 |
光學放大器.基礎規范.偏振模色散.瓊斯矩陣特征分析法(JME) |
(Optical fibre amplifiers - Basic specification - Polarization mode dispersion - Jones matrix eigenanalysis method (JME)) |
| BS EN 61290-11-2-2005 |
光學放大器.試驗方法.偏振模式分散參數.Poincare球面分析方法 |
|
| BS EN 61290-2-1-1998 |
光纖放大器.基本規范.光電參數的試驗方法.光譜分析儀 |
(Optical fibre amplifiers - Basic specification - Test methods for optical power parameters - Optical spectrum analyzer) |
| BS EN 61290-2-2-1998 |
光纖放大器.基本規范.光電參數的試驗方法.電氣頻譜分析儀 |
(Optical fibre amplifiers - Basic specification - Test methods for optical power parameters - Electrical spectrum analyzer) |
| BS EN 61290-2-3-1998 |
光纖放大器.基本規范.光電參數的試驗方法.光電儀 |
(Optical fibre amplifiers - Basic specification - Test methods for optical power parameters - Optical power meter) |
| BS EN 61290-3-1-2004 |
光學纖維放大器.基礎規范.噪音數字參數的測試方法.光譜分析儀法 |
|
| BS EN 61290-3-2-2003 |
光纖放大器.基礎規范.噪音指數參數的試驗方法.電頻譜分析儀法 |
(Optical fibre amplifiers - Basic specification - Test methods for noise figure parameters - Electrical spectrum analyzer method) |
| BS EN 61290-3-2000 |
光纖放大器.基本規范.噪音數字參數的試驗方法 |
(Optical fibre amplifiers - Basic specification - Test methods for noise figure parameters) |
| BS EN 61290-5-1-2000 |
光纖放大器.基本規范.反射系數的試驗方法.光譜分析儀 |
(Optical fibre amplifiers - Basic specification - Test methods for reflectance parameters - Optical spectrum analyser) |
| BS EN 61290-5-2-2004 |
光纖放大器.基本規范.反射參數的試驗方法.電頻譜分析儀法 |
|
| BS EN 61290-5-3-2002 |
光纖放大器的反射參數的試驗方法.用電子學光譜分析儀測定反射偏差的基本規范 |
(Optical fibre amplifiers - Basic specification - Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser) |
| BS EN 61290-6-1-1998 |
光纖放大器.基本規范.泵漏參數的試驗方法.光信號分離器 |
(Optical fibre amplifiers - Basic specification - Test methods for pump leakage parameters - Optical demultiplexer) |
| BS EN 61290-7-1-1998 |
光纖放大器.基本規范.譜帶外插入損失的試驗方法.濾光計 |
(Optical fibre amplifiers - Basic specification - Test methods for out-of-band insertion losses - Filtered optical power meter) |
| BS EN 61291-1-1998 |
光纖放大器.通用規范 |
(Optical fibre amplifiers - Generic specification) |
| BS EN 61291-2-2001 |
光纖放大器.數字應用.性能 |
(Optical fibre amplifiers - Digital applications - Performance specification template) |
| BS EN 61291-4-2003 |
光學纖維放大器.多信道應用.性能規范模板 |
(Optical fibre amplifiers - Multichannel applications - Performance specification template) |
| BS EN 61291-5-2-2003 |
光纖放大器.合格評定規范.光纖放大器可靠性合格評定 |
(Optical fibre amplifiers - Qualification specifications - Reliability qualification for optical fibre amplifiers) |
| BS EN 61293-1995 |
與供電相關的帶有額定值的電氣設備的標記.安全要求 |
(Marking of electrical equipment with ratings related to electrical supply - Safety requirements) |
| BS EN 61297-1996 |
工業過程控制系統.鑒定用自適應控制器的分類 |
(Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation) |
| BS EN 61298-1-1996 |
加工測量和控制裝置.評定性能用一般方法和程序.第1部分:一般考慮 |
(Process measurement and control devices - General methods and procedures for evaluating performance - General considerations) |
| BS EN 61298-2-1996 |
過程測量和控制裝置.性能鑒定用一般方法和程序.第2部分:參考條件下的試驗 |
(Process measurement and control devices - General methods and procedures for evaluating performance - Tests under reference conditions) |
| BS EN 61298-3-1998 |
過程測量和控制裝置.性能評定用一般方法和程序.影響量作用的測試 |
(Process measurement and control devices - General methods and procedures for evaluating performance - Tests for the effects of influence quantities) |
| BS EN 61298-4-1996 |
加工測量和控制裝置.評定性能用一般方法和程序.第4部分:評定報告含量 |
(Process measurement and control devices - General methods and procedures for evaluating performance - Evaluation report content) |
| BS EN 613-2001 |
獨立式燃?xì)鈱?duì)流加熱器 |
(Independent gas-fired convection heaters) |
| BS EN 61300-1-2003 |
纖維光學互連器件和無源件.基本試驗和測量程序.總則和指南 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - General and guidance) |
| BS EN 61300-2-1-2003 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.試驗.振動(正弦) |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Tests - Vibration (sinusoidal)) |
| BS EN 61300-2-10-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.抗壓碎試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Crush resistance) |
| BS EN 61300-2-11-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.試驗.軸向壓縮 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Axial compression) |
| BS EN 61300-2-12-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.試驗.沖擊 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Impact) |
| BS EN 61300-2-13-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.加速度試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Acceleration) |
| BS EN 61300-2-14-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.試驗.最大輸出功率 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Maximum input power) |
| BS EN 61300-2-15-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.試驗.連軸機械的扭矩強度 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Torque strength of coupling mechanisms) |
| BS EN 61300-2-16-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.霉菌生長試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Mould growth) |
| BS EN 61300-2-17-2003 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.試驗.低溫 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cold) |
| BS EN 61300-2-18-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.干熱.耐高溫試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Dry heat - High temperature endurance) |
| BS EN 61300-2-19-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.濕熱(穩態)試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Damp heat (steady state)) |
| BS EN 61300-2-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.濕熱(定態)試驗 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Damp heat (steady state)) |
| BS EN 61300-2-2-2003 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.試驗.配套耐久性 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Mating durability) |
| BS EN 61300-2-20-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.氣候試驗順序 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Climatic sequence) |
| BS EN 61300-2-21-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.復合溫濕度往復試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Composite temperature-humidity cyclic test) |
| BS EN 61300-2-22-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.溫度變化試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Change of temperature) |
| BS EN 61300-2-23-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.光纖設備無增壓閉路密封試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Sealing for non-pressurized closures of fibre optic devices) |
| BS EN 61300-2-24-2000 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.試驗.對陶瓷校直夾板套筒加負荷的篩析試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Screen testing of ceramic alignment split sleeve by stress application) |
| BS EN 61300-2-25-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.試驗.閉合用密封強度 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Sealing endurance for closures) |
| BS EN 61300-2-26-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.鹽霧試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Salt mist) |
| BS EN 61300-2-27-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.試驗.灰塵.層流 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Dust - Laminar flow) |
| BS EN 61300-2-28-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.工業大氣(二氧化硫)試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Industrial atmosphere (sulphur dioxide)) |
| BS EN 61300-2-29-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.低氣壓試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Tests - Low air pressure) |
| BS EN 61300-2-3-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.試驗.試驗.靜態剪切強度試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Tests - Static shear load) |
| BS EN 61300-2-30-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.太陽輻射試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Solar radiation) |
| BS EN 61300-2-31-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2部分第31節:試驗.核輻射 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Nuclear radiation) |
| BS EN 61300-2-32-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2部分第32節:試驗.水蒸氣滲透性 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Water vapour permeation) |
| BS EN 61300-2-33-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2部分第33節:閉路的組裝與拆卸試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Assembly and disassembly of closures) |
| BS EN 61300-2-34-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2部分第34節:耐溶劑和污染液體試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Resistance to solvents and contaminating fluids) |
| BS EN 61300-2-35-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2部分第35節:試驗.電纜下垂 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable nutation) |
| BS EN 61300-2-36-1997 |
光纖互聯裝置和無源部件.第2部分:基本試驗和測量步驟.第36節:試驗.易燃性(著火危險) |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Flammability (fire hazard)) |
| BS EN 61300-2-37-1997 |
光纖互聯裝置和無源部件.第2部分:基本試驗和測量步驟.第37節:試驗.閉路用彎曲電纜 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable bending for closures) |
| BS EN 61300-2-38-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2部分第38節:光纖設備增壓閉路的密封試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Sealing for pressurized closures of fibre optic devices) |
| BS EN 61300-2-39-1997 |
光纖互連設備和無源件.基本試驗和測量程序.第2部分第39節:試驗.外部磁場的靈敏性 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Susceptibility to external magnetic fields) |
| BS EN 61300-2-4-1997 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.試驗.纖維/電纜牢固性 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre/cable retention) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com