標準號 |
中文名稱 |
英文名稱 |
| BS 2A 61-1962 |
飛行器用鋁合金制六角頭螺栓(B.A和B.S.F螺紋)規范 |
(Specification for aluminium alloy hexagonal headed bolts (B.A. and B.S.F. threads) for aircraft) |
| BS 2B 25-2001 |
銅鎳硅合金棒材、型材、鍛坯、鍛件和零件(熱處理) |
(Copper-nickel-silicon alloy rods, sections, forging stock, forgings and parts (heat treated)) |
| BS 2B 26-2001 |
銅鎳硅合金棒材、型材和零件(溶液處理、冷加工和時效硬化) |
(Copper-nickel-silicon alloy rods, sections and parts (solution treated, cold worked and precipitation treated)) |
| BS 2B 27-2002 |
銅鋅鋁鎳硅合金管 |
(Copper-zinc-aluminium-nickel-silicon alloy tube) |
| BS 2B 28-2001 |
銅鈹合金帶材、箔及零件(溶液處理和時效硬化) |
(Copper-beryllium alloy strip, foil and parts (solution treated and precipitation treated)) |
| BS 2B 29-2001 |
銅鈹合金帶材、箔及零件(溶液處理、冷軋:低硬度和時效硬化) |
(Copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: quarter hard and precipitation treated)) |
| BS 2B 30-2001 |
銅鈹合金帶材、箔及零件(溶液處理、冷軋:半硬度和時效硬化) |
(Copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: half hard and precipitation treated)) |
| BS 2B 31-2001 |
銅鈹合金帶材、箔及零件(溶液處理、冷軋:全硬度和時效硬化) |
(Copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: full hard and precipitation treated)) |
| BS 2B 32-2001 |
銅鈹合金棒材、型材及零件(溶液處理和時效硬化) |
(Copper-beryllium alloy rods, sections and parts (solution treated and precipitation treated)) |
| BS 2B 33-2001 |
銅鈹合金絲及彈簧(溶液處理和時效硬化) |
(Copper-beryllium alloy wire and springs (solution treated and precipitation treated)) |
| BS 2C 11-1989 |
飛機壓力艙的地面壓力試驗連接件規范 |
(Specification for ground pressure test connections for aircraft pressure cabins) |
| BS 2C 12-1980 |
飛機用千斤頂?shù)装逡?guī)范 |
(Specification for jacking pads for aircraft) |
| BS 2C 13-1988 |
飛機重力灌注燃油口及有關供燃油嘴的尺寸規范(米制系列) |
(Specification for sizes of aircraft gravity filling orifices and associated replenishment nozzles (metric series)) |
| BS 2C 19-1994 |
新型壓力再澆油連接器規范 |
(Specification for pressure re-oiling connection (new type)) |
| BS 2C 4-1973 |
航空發動機制冷劑壓力補充灌注連接件的連接尺寸規范 |
(Specification for coupling dimensions for aero-engine refrigerant pressure replenishment connections) |
| BS 2C 5-1976 |
液態氧補充灌注連接管的配合尺寸規范 |
(Specification for mating dimensions for liquid oxygen replenishment couplings) |
| BS 2C 8-1988 |
飛機乘客設備和貨物約束用圍欄和支柱結構規范 |
(Specification for rail and stud configuration for aircraft passenger equipment and cargo restraint) |
| BS 2E 21-1957 |
飛機用普蘭式電纜 |
(Pren type electric cables for aircraft) |
| BS 2F 127-1991 |
適用于航空航天用天然或合成彈性體覆層尼龍織物規范 |
(Specification for nylon fabrics suitable for coating with natural or synthetic elastomers for aerospace purposes) |
| BS 2F 128-1992 |
適合于航空用的棉帶規范(額定經紗為R310特) |
(Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally R 310 tex)) |
| BS 2F 132-2002 |
航空航天用有規定尺寸穩定性的尼龍編織繩 |
(Braided nylon cord with specified dimensional stability for aerospace purposes) |
| BS 2F 134-2002 |
航空航天用聚酯縫紉細軸線 |
(Continuous filament polyester sewing thread suitable for aerospace purposes) |
| BS 2F 142-1999 |
航空航天用抗水解的涂覆熱塑性聚合物聚氨酯彈性物的尼龍纖維 |
(Hydrolysis resistant, thermoplastic polyether polyurethane elastomer coated nylon fabric for aerospace purposes) |
| BS 2F 52-1959 |
航空用亞麻增強帶 |
(Flax reinforcement webbing for aeronautical purposes) |
| BS 2F 66-1982 |
橡膠粘合的軟木板規范 |
(Specification for rubber bonded cork sheets) |
| BS 2F 67-1980 |
航空燃料和發動機潤滑油用軟管規范 |
(Specification for hose for aviation fuel and engine lubricating oil for aeronautical purposes) |
| BS 2G 111-1955 |
飛機爬升率指示儀規范 |
(Specification for rate of climb indicators for aircraft) |
| BS 2G 112-1956 |
航空用風動航向陀螺儀規范 |
(Specification for air-driven directional gyroscopes for aircraft) |
| BS 2G 113-1956 |
航空用進氣管壓力表規范 |
(Specification for manifold pressure gauges for aircraft) |
| BS 2G 114-1953 |
航空用直流電流比率指示儀規范 |
(Specification for direct current ratiometer indicators for aircraft) |
| BS 2G 115-1956 |
航空用靈敏高度計規范 |
(Specification for sensitive altimeters for aircraft) |
| BS 2G 117-1975 |
壓力驅動的空氣速度表規范 |
(Specification for pressure-driven airspeed indicators) |
| BS 2G 124-1-1966 |
航空交流發電機規范.恒定頻率 |
(Specification for a.c. generators for aircraft - Constant frequency) |
| BS 2G 124-2-1966 |
航空交流發電機規范.第2部分:可變頻率 |
(Specification for a.c. generators for aircraft - Variable frequency) |
| BS 2G 127-1967 |
航空電源系統用電力變壓器和電流互感器規范 |
(Specification for power and current transformers for use in aircraft electrical power supply systems) |
| BS 2G 132-1981 |
飛機用電磁操縱的接觸器的一般要求規范 |
(Specification for general requirements for electromagnetically operated contactors for aircraft) |
| BS 2G 134-1970 |
直流發電機規范 |
(Specification for d.c. generators) |
| BS 2G 135-1967 |
電熱皮托壓頭和皮托靜壓頭規范 |
(Specification for electrically-heated pitot and pitotstatic pressure heads) |
| BS 2G 143-1965 |
航空用交流和直流旋轉式和直線式執行機構規范 |
(Specification for a.c. and d.c. rotary and linear actuators for aircraft) |
| BS 2G 146-1966 |
航空用直流電動機規范 |
(Specification for d.c. motors for aircraft) |
| BS 2G 147-1-1966 |
航空用交流電動機規范.三相恒定頻率鼠籠式感應電動機 |
(Specification for a.c. motors for aircraft - Three-phase constant frequency squirrel-cage induction motors) |
| BS 2G 147-2-1966 |
航空用交流電動機規范.第2部分:三相可變頻率鼠籠式感應電動機 |
(Specification for a.c. motors for aircraft - Three-phase variable frequency squirrel-cage induction motors) |
| BS 2G 180-1974 |
航空用電纜固定編接規范 |
(Specification for permanent splicing of aircraft electrical cables) |
| BS 2G 182-1975 |
航空用壓力驅動的馬赫表規范 |
(Specification for pressure-driven machmeters for aircraft) |
| BS 2G 191-1988 |
使用整體白熾燈的航空指示儀照明規范 |
(Specification for lighting for aircraft indicators using integral filament lamps) |
| BS 2G 196-1971 |
靜態反向變流機規范 |
(Specification for static invertors) |
| BS 2G 199-1984 |
航空儀器設計和校準用高度、空氣速度和馬赫數值表 |
(Schedule for tables relating to altitudes, airspeed and Mach numbers for use in aeronautical instrument design and calibration) |
| BS 2G 201-1996 |
測量器和氣壓高度指示表的規范 |
(Specification for counter and pointer pressure altimeters) |
| BS 2G 202-1988 |
直流和低頻交流用安裝在機體上的電連接器的設計和性能要求規范 |
(Specification for design and performance requirements for airframe-fit electrical connectors for d.c. and low frequency a.c. applications) |
| BS 2G 215-1-1985 |
航空用鎳-鉻和鎳-鉛熱電偶延伸電纜.第1部分:導線規范 |
(Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for conductors) |
| BS 2G 215-2-1989 |
航空用鎳-鉻和鎳-鉛熱電偶延伸電纜.第2部分:終端規范 |
(Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for terminations) |
| BS 2G 219-1983 |
航空用地面電源的一般要求規范 |
(Specification for general requirements for ground support electrical supplies for aircraft) |
| BS 2G 221-1980 |
航空用電力電纜(米制)規范 |
(Specification for Minyvin type electric cables (metric units)) |
| BS 2G 223-1989 |
航空電纜用屏蔽終端裝置規范 |
(Specification for screen terminating devices for aircraft electric cables) |
| BS 2G 232-1987 |
普通機體或設備互連用(135℃)繞扎絕緣電纜規范 |
(Specification for electric cables for general airframe or equipment interconnect use (135 鳦), wrapped insulation) |
| BS 2G 238-1996 |
普通機體或設備互連用(260℃)鍍鎳銅和銅合金導線繞扎絕緣電纜規范 |
(Specification for electric cables for general airframe or equipment interconnect use (260 鳦), nickel plated copper and copper alloy conductors, with wrapped insulation) |
| BS 2G 239-1992 |
飛行器用原活性鋰電池規范 |
(Specification for primary active lithium batteries for use in aircraft) |
| BS 2HC 101-1990 |
沉淀硬化鉻-鎳-銅-鉬鋼鑄件(950MPa)(鉻14.0、鎳4.5、銅2.5、鉬1.5)規范 |
(Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (950 MPa) (Cr 14.0, Ni 4.5, Cu 2.5, Mo 1.5)) |
| BS 2HC 102-1990 |
沉淀硬化鉻-鎳-銅-鉬鋼鑄件(1250MPa)(鉻14.0、鎳4.5、銅2.5、鉬1.5)規范 |
(Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (1250 MPa) (Cr 14.0, Ni 4.5, Cu 2.5, Mo 1.5)) |
| BS 2HC 203-1989 |
鎳-鉻-鋁-鉬-鈮合金鑄件規范 |
(鎳基鉻13.0、鋁6.0、鉬4.5、鈮2.3(Specification for nickel-chromium-aluminium-molybdenum-niobium alloy castings (Nickel base Cr 13.0, Al 6.0, Mo 4.5, Nb 2.3)) |
| BS 2HC 204-1989 |
鎳-鈷-鉻-鋁-鈦-鉬合金鑄件規范(鎳基鈷15.0、鉻10.0、鋁5.5、鈦4.8、鉬3.0) |
(Specification for nickel-cobalt-chromium-aluminium-titanium-molybdenum alloy castings (Nickel base Co 15.0, Cr 10.0, Al 5.5, Ti 4.8, Mo 3.0)) |
| BS 2HC 207-1989 |
鎳-鈷-鎢-鉻-鋁-鉭-鉿-鈦合金鑄件規范(鎳基鈷10.0、鎢10.0、鉻9.0、鋁5.5、鉭25、鉿1.5、鈦1.5) |
(Specification for nickel-cobalt-tungsten-chromium-aluminium-tantalum-hafnium-titanium alloy castings (Nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Ta 2.5, Hf 1.5, Ti 1.5)) |
| BS 2HC 208-1989 |
鎳-鈷-鎢-鉻-鋁-鉬-鈦-鉭合金鑄件規范(鎳基鈷10.0、鎢10.0、鉻9.0、鋁5.5、鉬2.5、鈦1.5、鉭1.5) |
(Specification for nickel-cobalt-tungsten-chromium-aluminium-molybdenum-titanium-tantalum alloy castings (nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Mo 2.5, Ti 1.5, Ta 1.5)) |
| BS 2HC 209-1989 |
低碳、沉淀硬化鎳-鉻-鋁-鉬-鈮合金鑄件規范(鎳基鉻11.5、鋁6.0、鉬4.0、鈮2.0) |
(Specification for low carbon, precipitation hardening nickel-chromium-aluminium-molybdenum-niobium alloy castings (Nickel base Cr 11.5, Al 6.0, Mo 4.0, Nb 2.0)) |
| BS 2HC 210-1989 |
鎳-鎢-鋁-鉻-鉬合金鑄件規范(鎳基鎢10.5、鋁6.0、鉻6.0、鉬2.0) |
(Specification for nickel-tungsten-aluminium-chromium-molybdenum alloy castings (Nickel base W 10.5, Al 6.0, Cr 6.0, Mo 2.0)) |
| BS 2HC 211-1989 |
鎳-鉻-鈷-鉬-鋁鈦合金鑄件規范(鎳基鉻15.5、鈷10.0、鉬8.3、鋁4.2、鈦3.6) |
(Specification for nickel-chromium-cobalt-molybdenum-aluminium-titanium alloy castings (Nickel base Cr 15.5, Co 10.0, Mo 8,3, Al 4.2, Ti 3.6)) |
| BS 2HR 1-1973 |
鎳-鉻-鈦鋁耐熱合金坯錠、棒材、鍛件和部件(鎳基、Cr 19.5、Ti2.2、Al1.4)規范 |
(Specification for nickel-chromium-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 2.2, Al 1.4)) |
| BS 2HR 2-1973 |
鎳-鉻-鈦-鋁耐熱合金坯錠、棒材、鍛件和部件(鎳基、Cr 19.5、Co18.0、Ti25、Al1.5)規范 |
(Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)) |
| BS 2HR 201-1974 |
鎳-鉻-鈦-鋁耐熱合金板材、薄板材和帶材(鎳基、Cr19.5、Ti2.2、Al1.4)規范 |
(Specification for nickel-chromium-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 2.2, Al 1.4)) |
| BS 2HR 202-1973 |
鎳-鉻-鈷-鈦耐熱合金薄板材和帶材(鎳基、Cr19.5、Co18.0、Ti2.5、Al1.5)規范 |
(Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy sheet and strip (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)) |
| BS 2HR 401-1973 |
冷加工和軟化的無縫鎳鉻鈦鋁耐熱合金管(鎳基、Cr19.5、Ti2.2、Al1.4)規范 |
(Specification for nickel-chromium-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Ti 2.2, Al 1.4)) |
| BS 2HR 501-1973 |
彈簧冷拉固溶熱處理的鎳鉻鈷鈦鋁耐熱合金線材(鎳基、Cr19.5、Co18.0、Ti2.5、Al1.5)規范 |
(Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)) |
| BS 2HR 502-1973 |
彈簧用冷拉和固溶熱處理的鎳鉻鈷鈦鋁耐熱合金線材(鎳基、Cr19.5、Co18.0、Ti2.5、Al1.5)規范 |
(Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn and solution heat treated wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)) |
| BS 2HR 503-1973 |
螺紋墊圈(直徑0.45mm-2mm)用鎳鉻鈷鈦鋁耐熱合金線材(鎳基、Cr19.5、Co18.0、Ti2.5、Al1.5)規范 |
(Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire for thread inserts (0.45 mm to 2 mm diameter) (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)) |
| BS 2HR 504-1973 |
鎳-鉻-鈦耐熱合金棒材、線材和鉚釘(鎳基、Cr19.5、Ti0.4)規范 |
(Specification for nickel-chromium-titanium heat-resisting alloy bar, wire and rivets (nickel base, Cr 19.5, Ti 0.4)) |
| BS 2L 126-1970 |
鎂-鈰(3.0)-鋅(2.3)-鋯(0.6)合金鑄錠和鑄件規范(沉淀處理) |
(Specification for ingots and castings of magnesium-cerium-zinc-zirconium alloy (precipitation treated) (rare earth metals 3.0, Zn 2.3, Zr 0.6)) |
| BS 2L 127-1970 |
鎂-鋅(4.5)-鋯(0.7)合金鑄錠和鑄件規范(沉淀處理) |
(Specification for ingots and castings of magnesium-zinc-zirconium alloy (precipitation treated)(Zn 4.5, Zr 0.7)) |
| BS 2L 128-1970 |
鎂-鋅(4.5)-鈰(1.2)-鋯(1.7)合金鑄錠和鑄件規范(沉淀處理) |
(Specification for ingots and castings of magnesium-zinc-cerium-zirconium alloy (precipitation treated)(Zn 4.5, rare earth metals 1.2, Zr 0.7)) |
| BS 2L 500-1973 |
鎂基合金鍛件檢驗和試驗規程 |
(Procedure for inspection and testing of wrought magnesium-base alloys) |
| BS 2L 503-1973 |
鎂-鋁(6)-鋅(1.0)合金管規范 |
(Specification for tube of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0)) |
| BS 2L 504-1973 |
鎂-鋅(3)-鋯(0.6)合金的薄板材和帶材規范 |
(Specification for sheet and strip of magnesium-3% zinc-zirconium alloy (Zn 3.0, Zr 0.6)) |
| BS 2L 505-1973 |
鎂-鋅(3)-鋯(0.6)合金棒材和擠壓型材規范(直徑或較小截面尺寸小于100mm) |
(Specification for bars and extruded sections of magnesium-3% zinc-zirconium alloy (not exceeding 100 mm diameter or minor sectional dimension) (Zn 3.0, Zr 0.6)) |
| BS 2L 508-1973 |
鎂-1 |
(Specification for bars and extruded sections of magnesium-1) |
| BS 2L 509-1973 |
鎂-鋅(1.25)-鋯(0.6)合金管規范(適用于隋性氣體保護焊接) |
(Specification for tube of magnesium-1) |
| BS 2L 77-1971 |
鋁銅鎂硅錳合金鍛坯和鍛件的規范(溶解和沉降處理)(銅4.4,鎂0.5,硅0.7,錳0.8) |
(Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)) |
| BS 2L 83-1971 |
鋁-銅(2)-鎳(1)-鎂(1)-鐵(0.9)-硅(0.9)合金鍛坯、棒材、擠壓型材和鍛件規范(溶液處理和沉淀熱處理) |
(Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe) |
| BS 2L 85-1971 |
鋁-銅(1.5)-硅(1)和鎂(0.8)合金鍛坯、棒材、擠壓型材和鍛件規范(溶液處理和沉淀熱處理) |
(Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)) |
| BS 2L 87-1971 |
用于制造螺母、聯軸節和中空機器部件的鋁-銅(4.4)-鎂(0.5)-硅(0.7)-錳(0.8)合金六角棒材規范(溶液處理和沉 |
(對邊尺寸小于36MM大于14MM)() |
| BS 2L 93-1971 |
鋁-銅(4.5)-鎂(0.5)-硅(0.7)-錳(0.8)合金板規范(溶液處理控制拉伸和沉淀處理) |
(Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)) |
| BS 2L 95-1971 |
鋁-鋅(5.8)-鎂(1.5)-銅(1.6)-鉻(0.15)合金板規范(溶液處理、控制拉伸和沉淀處理) |
(Specification for plate of aluminium-zinc-magnesium-copper-chromium alloy (solution treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)) |
| BS 2L 97-1971 |
鋁-銅(4.4)-鎂(1.5)-錳(0.6)合金板規范(溶液處理,室溫時效:控制拉伸) |
(Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated, controlled stretched and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)) |
| BS 2L 98-1971 |
鋁-銅(4.4)-鎂(1.5)-錳(0.6)合金板規范(溶液處理、室溫時效:不控制拉伸的) |
(Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature: not controlled stretched) (Cu 4.4, Mg 1.5, Mn 0.6)) |
| BS 2L 99-1972 |
鋁-硅(7)-鎂(0.3)合金鑄錠和鑄件規范(溶液處理和沉淀處理) |
(Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and precipitation treated) (Si 7, Mg 0.3)) |
| BS 2M 41-1977 |
推進裝置和件標準號及其旋轉方向描述方法 |
(Methods of numbering propulsion units and components and describing their direction of rotation) |
| BS 2M 46-1986 |
管外徑和壁厚規范 |
(Specification for outside diameters and thicknesses of tubing) |
| BS 2M 47-1990 |
飛機用子午線簾布輪胎翻新規范 |
(Specification for retreading of cross ply tyres for aircraft) |
| BS 2M 49-1997 |
飛行器液壓組件.已校準組件用液體指示的標志 |
(Aircraft - Hydraulic components - Marking to indicate fluid for which component is approved) |
| BS 2M 50-1986 |
航空三角架千斤頂間隙尺寸規范 |
(Specification for clearance dimensions for tripod jacks for aircraft) |
| BS 2M 51-1989 |
液壓系統和件壓力和溫度分類 |
(Classification for pressure and temperature for fluid systems and components) |
| BS 2M 52-1989 |
航空液壓系統軟管、管子和配件組裝脈沖試驗法 |
(Method for impulse testing of hydraulic hose, tubing and fitting assemblies for aerospace fluid systems) |
| BS 2M 53-1997 |
飛行器.液壓系統.管道和管道配件熱沖擊試驗 |
(Aircraft - Fluid systems - Thermal shock testing of piping and fittings) |
| BS 2M 54-1991 |
金屬熱處理中的溫度控制規范 |
(Specification for temperature control in the heat treatment of metals) |
| BS 2M 59-1993 |
航空航天流體動力系統用24度錐形米制連接器接口規范 |
(Specification for interface of metric couplings, 24 ?cone, for aerospace fluid systems) |
| BS 2M 63-1993 |
航空航天流體動力系統端口連接、密封和配件終端的尺寸規范 |
(Specification for dimensions of aerospace fluid system port connection, seal and fitting end) |
| BS 2PL 1-1966 |
航空用酚醛壓制件規范 |
(Specification for phenolic mouldings for aeronautical purposes) |
| BS 2S 111-1964 |
航空材料規范.鎳鉻鎢閥門鋼 |
(Specification for aircraft material - Nickel-chromium-tungsten valve steel) |
| BS 2S 112-1964 |
航空材料規范.機械加工用較易切削碳素鋼、光亮冷拔棒(40-50噸力/平方英寸;最大直徑或最小斷面尺寸1/2英寸)( |
(Specification for aircraft material - Semi-free cutting carbon steel, bright bars for machining (40-50 tonf/sq in: maximum size) |
| BS 2S 113-1964 |
航空材料規范.機械制造用40號碳素鋼光亮冷拔棒(45-55噸力/平方英寸;限定等圓斷面1英寸)(主要用于制造螺母) |
(Specification for aircraft material - ’40’ carbon steel bright bars for machining (45-55 tonf/sq in: limiting ruling section 1 inch) (primarily intended for the manufacture of nuts)) |
| BS 2S 114-1964 |
航空材料規范.錳鉬鋼 |
(55-65噸力/平方英寸;限定等圓斷面2(Specification for aircraft material - Manganese-molybdenum steel (55/65 tonf/sq in: limiting ruling section 2) |
| BS 2S 116-1964 |
航空材料規范.機械制造用40號碳素鋼光亮冷棒(55-65噸力/平方英寸;限定等圓斷面1/4英寸)(主要用于制造螺栓) |
(Specification for aircraft material - ’40’ carbon steel bright bars for machining (55-65 tonf/sq in: limiting ruling section) |
| BS 2S 117-1964 |
航空材料規范.1%鉻鋼 |
(55-65噸力/平方英寸;限定等圓斷面1(Specification for aircraft material - 1 per cent chromium steel (55/65 tonf/sq in: limiting ruling section 1) |
| BS 2S 124-1964 |
航空材料規范.含12%鉻耐腐蝕鋼(高速切削)(45/55噸力/平方英寸;限定等圓斷面6英寸) |
(Specification for aircraft material - 12 per cent chromium corrosion-resisting steel (free machining) (45/55 tonf/sq in: limiting ruling section 6 in)) |
| BS 2S 129-1976 |
18/9鉻鎳耐腐蝕鋼(鈦穩定的)坯、棒材、鍛件及零件規范(540MPa;限定等圓斷面150mm) |
(Specification for 18/9 chromium-nickel corrosion-resisting steel (titanium stabilized) billets, bars, forgings and parts(540 MPa: limiting ruling section 150 mm)) |
| BS 2S 130-1976 |
18/9鉻鎳耐腐蝕鋼(鈮穩定的)坯、棒材、鍛件及零件規范(540MPa;限定等圓斷面150mm) |
(Specification for 18/9 chromium-nickel corrosion-resisting steel (niobium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm)) |
| BS 2S 131-1977 |
高熱膨脹鋼方坯、棒材、鍛件及零件規范(620MPa;限定等圓斷面150mm) |
(Specification for high thermal expansion steel billets, bars, forgings and parts (620 MPa: limiting ruling section 150 mm)) |
| BS 2S 135-1977 |
含1%碳-鉻鋼方坯、棒材、鍛件及零件規范.(限定等圓斷面25mm) |
(Specification for 1% carbon-chromium steel billets, bars, forgings and parts (limiting ruling section 25 mm)) |
| BS 2S 136-1977 |
含1%碳-鉻鋼(真空電弧再熔化的)方坯、棒材、鍛件及零件規范.(限定等圓斷面25mm) |
(Specification for 1% carbon-chromium steel (vacuum arc remelted) billets, bars, forgings and parts (limiting ruling section 25 mm)) |
| BS 2S 137-1976 |
高鉻鎳耐腐蝕鋼光亮冷拔棒(高速切削)規范.(880-1080MPa;限定等圓斷面70mm) |
(Specification for high chromium-nickel corrosion-resisting steel bright bars (free machining) (880-1080 MPa: limiting ruling section 70 mm)) |
| BS 2S 140-1976 |
含5/2%鎳-鉻-鉬鋼方坯、棒材、鍛件及零件規范(1080-1280MPa;限定等圓斷面150mm) |
(Specification - 2) |
| BS 2S 142-1977 |
含1%鉻-鉬鋼方坯、棒材、鍛件及零件規范(900-1100MPa;限定等圓斷面40mm) |
(Specification for 1% chromium-molybdenum steel billets, bars, forgings and parts (900-1100 MPa: limiting ruling section 40 mm)) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com