標準號 |
中文名稱 |
英文名稱 |
| BS EN 10246-13-2000 |
鋼管的無損檢測.無縫和焊接鋼管(埋弧焊除外)的全自動外圍超聲波厚度檢測 |
Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes |
| BS EN 10246-14-2000 |
鋼管的無損檢驗.層狀缺陷探測用無縫和焊接(埋弧焊接除外)鋼管的自動超聲檢驗 |
Non-destructive testing of steel tubes - Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections |
| BS EN 10246-15-2000 |
鋼管的無損檢測.無縫和焊接鋼管(埋弧焊除外)的全自動外圍超聲波厚度檢測 |
(Non-destructive testing of steel tubes - Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections) |
| BS EN 10246-16-2000 |
鋼管的無損檢驗.層狀缺陷探測用調節到焊接鋼管焊縫區域的自動超聲波檢驗 |
(Non-destructive testing of steel tubes - Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections) |
| BS EN 10246-17-2000 |
鋼管的無損檢驗.層狀缺陷探測用無縫和焊接鋼管管端部的超聲波檢驗 |
(Non-destructive testing of steel tubes - Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections) |
| BS EN 10246-18-2000 |
鋼管的無損檢驗.層狀缺陷探測用無縫和焊接鐵磁鋼管管端部的磁粉檢驗 |
(Non-destructive testing of steel tubes - Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections) |
| BS EN 10246-2-2000 |
鋼管的無損檢測.驗證水密封性用無縫和焊接的(埋弧焊除外)奧氏體鐵素體鋼管的自動渦流試驗 |
(Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydrauli) |
| BS EN 10246-3-2000 |
鋼管的無損檢驗.缺陷探測用無縫和焊接(埋弧焊除外)鋼管的自動渦流試驗 |
(Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections) |
| BS EN 10246-4-2000 |
鋼管的無損檢驗.橫向缺陷探測用無縫鐵磁性鋼管自動全周界磁化換能器/流量滲漏試驗 |
(Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections) |
| BS EN 10246-5-2000 |
鋼管的無損檢驗.徑向缺陷探測用無縫和焊接(埋弧焊除外)的鐵磁性鋼管自動全周界磁化換能器/流量滲漏試驗 |
(Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detec) |
| BS EN 10246-6-2000 |
鋼管的無損檢驗.橫向缺陷探測用無縫鋼管自動全周界超聲檢驗 |
(Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections) |
| BS EN 10246-7-1996 |
鋼管的無損檢測.第7部分:證明長度誤差用整個管圓周上無縫和焊接鐵磁鋼管(埋弧焊除外)的自動超聲波檢驗 |
(Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections) |
| BS EN 10246-8-2000 |
鋼管的無損試驗.徑向缺陷探測用電焊鋼管焊縫的自動超聲試驗 |
(Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections) |
| BS EN 10246-9-2000 |
鋼管的無損檢測.檢測縱向或橫向缺陷用焊接和埋弧焊鋼管的自動超聲波檢測 |
(Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections) |
| BS EN 10248-1-1996 |
非合金鋼制熱軋板樁.第1部分:交貨技術條件 |
(Hot rolled sheet piling of non alloy steels - Technical delivery conditions) |
| BS EN 10248-2-1996 |
非合金鋼制熱軋板樁.第2部分:極限尺寸和外形公差 |
(Hot rolled sheet piling of non alloy steels - Tolerances on shape and dimensions) |
| BS EN 10249-1-1996 |
非合金鋼制冷成型板樁.第1部分:交貨技術條件 |
(Cold formed sheet piling of non alloy steels - Technical delivery conditions) |
| BS EN 10249-2-1996 |
非合金鋼制冷成型板樁.第2部分:極限尺寸和外形公差 |
(Cold formed sheet piling of non alloy steels - Tolerances on shape and dimensions) |
| BS EN 10250-1-1999 |
一般工程用途的敞口鋼模鍛件.一般要求 |
(Open steel die forgings for general engineering purposes - General requirements) |
| BS EN 10250-2-2000 |
一般工程用途的敞口鋼模鍛件.非合金質量特殊鋼 |
(Open steel die forgings for general engineering purposes - Non-alloy quality and special steels) |
| BS EN 10250-3-2000 |
一般工程用途的敞口鋼模鍛件.合金特殊鋼 |
(Open steel die forgings for general engineering purposes - Alloy special steels) |
| BS EN 10250-4-2000 |
一般工程用途的敞口鋼模鍛件.不銹鋼 |
(Open steel die forgings for general engineering purposes - Stainless steels) |
| BS EN 10251-1997 |
磁性材料.測定電工鋼片和電工鋼帶幾何特性值的方法 |
(Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip) |
| BS EN 10252-1997 |
磁性物質.以中頻測量磁鋼薄板和帶材磁性能的方法 |
(Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies) |
| BS EN 10253-1-1999 |
對接焊管道配件.一般用途和無特殊檢驗要求的鍛制碳鋼 |
(Butt-welding pipe fittings - Wrought carbon steel for general use and without specific inspection requirements) |
| BS EN 10254-1999 |
鋼封閉模鍛件.一般技術提交條件 |
(Steel closed die forgings - General technical delivery conditions) |
| BS EN 10255-2004 |
焊接或加螺紋的非合金鋼管.交貨技術條件 |
|
| BS EN 10255-2004 |
焊接和加螺紋的非合金鋼管.交貨技術條件 |
|
| BS EN 10256-2000 |
鋼管的無損檢驗.1級和2級無損檢驗師的資格及能力 |
(Non-destructive testing on steel tubes - Qualification and competence of level 1 and level 2 non-destructive testing personnel) |
| BS EN 10257-1-1998 |
電力電纜或通信電纜鎧裝用鍍鋅或鋅合金非合金鋼絲.地面電纜 |
(Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Land cables) |
| BS EN 10257-2-1998 |
電力電纜或通信電纜鎧裝用鋅或鋅合金涂覆非合金鋼絲.海底電纜 |
(Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Submarine cables) |
| BS EN 10258-1997 |
冷軋不銹鋼窄帶材和剪切長度.尺寸和外形公差 |
(Cold-rolled stainless steel narrow strip and cut lengths - Tolerances on dimensions and shape) |
| BS EN 10259-1997 |
冷軋不銹鋼和耐熱鋼寬帶材,中厚板與薄板.尺寸和外形公差 |
(Cold-rolled stainless and heat resisting steel wide strip and plate/sheet - Tolerances on dimensions and shape) |
| BS EN 1026-2000 |
門窗.透氣率.試驗方法 |
(Windows and doors - Air permeability - Test method) |
| BS EN 10263-1-2001 |
冷加工和冷擠壓的鋼棒,棍和線.一般交貨技術條件 |
(Steel rod, bars and wire for cold heading and cold extrusion - General technical delivery conditions) |
| BS EN 10263-2-2001 |
冷加工和冷擠壓的鋼棒,棍和線.一般交貨技術條件.冷處理后不用于熱處理的鋼 |
(Steel rod, bars and wire for cold heading and cold extrusion - Technical delivery conditions for steels not intended for heat treatment after cold working) |
| BS EN 10263-3-2001 |
冷加工和冷擠壓的鋼棒,棍和線.一般交貨技術條件.表面硬化鋼 |
(Steel rod, bars and wire for cold heading and cold extrusion - Technical delivery conditions for case hardening steels) |
| BS EN 10263-4-2001 |
冷加工和冷擠壓的鋼棒,棍和線.淬火和回火鋼的一般交貨技術條件. |
(Steel rod, bars and wire for cold heading and cold extrusion - Technical delivery conditions for steels for quenching and tempering) |
| BS EN 10263-5-2001 |
冷加工和冷擠壓的鋼棒,棍和線.不銹鋼的交貨技術條件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Technical delivery conditions for stainless steels) |
| BS EN 10264-1-2002 |
鋼絲和鋼絲產品.繩索用鋼絲.一般要求 |
(Steel wire and wire products - Steel wire for ropes - General requirements) |
| BS EN 10264-2-2002 |
鋼絲和鋼絲產品.繩索用鋼絲.一般繩索用的冷拉非合金鋼絲 |
(Steel wire and wire products - Steel wire for ropes - Cold drawn non alloy steel wire for ropes for general applications) |
| BS EN 10264-3-2002 |
鋼絲和鋼絲產品.繩索用鋼絲.重型裝置用圓形和異型非合金鋼絲 |
(Steel wire and wire products - Steel wire for ropes - Round and shaped non alloyed steel wire for high duty applications) |
| BS EN 10264-4-2002 |
鋼絲和鋼絲產品.繩索用鋼絲.不銹鋼絲 |
(Steel wire and wire products - Steel wire for ropes - Stainless steel wire) |
| BS EN 10265-1996 |
磁性材料.薄板材和帶材的機械特性和磁導率的規范 |
(Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability) |
| BS EN 10266-2003 |
鋼管、配件和結構空心型材.產品標準中術語的符號和定義 |
(Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards) |
| BS EN 10267-1998 |
熱加工溫度下沉淀硬化用鐵素體-珠光體鋼 |
(Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures) |
| BS EN 10268-1999 |
由冷成型高彎曲強度微合金鋼制造的冷軋平板制品.一般提交條件 |
(Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions) |
| BS EN 10269-1999 |
規定高溫和/或低溫性能的緊固件用鋼及鎳合金 |
(Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties) |
| BS EN 1027-2000 |
門窗.水密性.試驗方法 |
(Windows and doors - Watertightness - Test method) |
| BS EN 10270-1-2001 |
金屬彈簧用鋼線.獲得專利的冷拉伸非合金彈簧鋼線 |
(Steel wire for mechanical springs - Patented cold drawn unalloyed spring steel wire) |
| BS EN 10270-2-2001 |
機械彈簧鋼線.油硬化和回火的彈簧鋼線 |
(Steel wire for mechanical springs - Oil hardened and tempered spring steel wire) |
| BS EN 10270-3-2001 |
機械彈簧鋼線.不銹鋼彈簧鋼線 |
(Steel wire for mechanical springs - Stainless spring steel wire) |
| BS EN 10271-1999 |
電鍍鋅鎳涂覆鋼平板制品.技術提交條件 |
(Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions) |
| BS EN 10272-2000 |
壓力裝置用不銹鋼棒材 |
(Stainless steel bars for pressure purposes) |
| BS EN 10273-2000 |
有特定高溫性能的壓力裝置用熱軋可焊接鋼棒 |
(Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties) |
| BS EN 10274-1999 |
金屬材料.失落重力撕裂試驗 |
(Metallic materials - Drop weight tear test) |
| BS EN 10275-1999 |
金屬材料.管形環水壓試驗 |
(Metallic materials - Tube ring hydraulic pressure test) |
| BS EN 10276-1-2000 |
鐵素體材料的化學分析.鋼鐵中氧的含量測定.氧測定用鋼樣品的抽樣和制備 |
(Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Sampling and preparation of steel samples for oxygen determination) |
| BS EN 10276-2-2003 |
鋼鐵材料的化學分析.鋼和鐵中氧的含量測定.在惰性氣體中熔解后紅外法 |
(Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Infrared method after fusion under inert gas) |
| BS EN 10277-1-1999 |
光亮鋼產品.技術提交條件.總則 |
(Bright steel products - Technical delivery conditions - General) |
| BS EN 10277-2-1999 |
光亮鋼產品.技術提交條件.一般工程用途鋼 |
(Bright steel products - Technical delivery conditions - Steels for general engineering purposes) |
| BS EN 10277-3-1999 |
光亮鋼產品.技術提交條件.自由切割鋼 |
(Bright steel products - Technical delivery conditions - Free cutting steels) |
| BS EN 10277-4-1999 |
光亮鋼產品.技術交貨條件.表面硬化鋼 |
(Bright steel products - Technical delivery conditions - Case-hardening steels) |
| BS EN 10277-5-1999 |
光亮鋼產品.技術提交條件.淬火和回火鋼 |
(Bright steel products - Technical delivery conditions - Steels for quenching and tempering) |
| BS EN 10278-1999 |
光亮鋼產品的尺寸和公差 |
(Dimensions and tolerances of bright steel products) |
| BS EN 10279-2000 |
熱軋鋼槽.質量,尺寸,形狀公差 |
(Hot rolled steel channels - Tolerances on shape, dimension and mass) |
| BS EN 1028-1-2002 |
消防泵.起動注油消防離心泵.分類.總則和安全要求 |
(Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Classification - General and safety requirements) |
| BS EN 1028-2-2002 |
消防泵.帶primer消防離心泵.一般驗證和安全要求 |
(Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Verification of general and safety requirements) |
| BS EN 10280-2001 |
磁性材料.通過單片試驗片對電氣片和帶的磁性能測量的方法 |
(Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester) |
| BS EN 10282-2001 |
磁性材料.電氣片和帶的表面絕緣性能測定的試驗方法 |
(Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip) |
| BS EN 10283-1999 |
腐蝕抗性鋼鑄件 |
(Corrosion resistant steel castings) |
| BS EN 10288-2002 |
岸上和近海管線用鋼管及配件.外部雙層擠壓聚乙烯基涂層 |
(Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings) |
| BS EN 10289-2002 |
岸上和海中管線用鋼管和配件.外用環氧樹脂及環氧樹脂修飾層 |
(Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings) |
| BS EN 10290-2002 |
岸上和海底輸油管用鋼管和配件.用于外部液體的聚氨酯和改進型聚氨酯脂涂層 |
(Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings) |
| BS EN 10291-2000 |
金屬材料.拉伸同軸蠕變試驗.試驗方法 |
(Metallic materials - Uniaxial creep testing in tension - Methods of test) |
| BS EN 10292-2000 |
冷成型用高屈服強度的連續熱浸鍍鋅鋼帶材和薄板.交貨技術條件 |
(Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming - Technical delivery conditions) |
| BS EN 10295-2002 |
耐熱鋼鑄件 |
(Heat resistant steel castings) |
| BS EN 10296-1-2003 |
機械和一般工程用焊接圓鋼管.技術交貨條件.非合金和合金鋼管 |
(Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes) |
| BS EN 10297-1-2003 |
機械和工程通用無密封環形鋼管.技術交貨條件.非合金和合金鋼管 |
(Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes) |
| BS EN 10301-2003 |
岸上及海底管道用鋼管及配件.非腐蝕性氣體的輸送用減少摩擦的內涂層 |
(Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas) |
| BS EN 10302-2002 |
耐蠕變的鎳和鈷合金鋼 |
(Creep resisting steels, nickel and cobalt alloys) |
| BS EN 10303-2001 |
在中等頻率使用的薄磁性鋼板和帶材 |
(Thin magnetic steel sheet and strip for use at medium frequencies) |
| BS EN 10304-2001 |
繼電器用磁性材料(鋼鐵) |
(Magnetic materials (iron and steel) for use in relays) |
| BS EN 10305-1-2002 |
精密儀器用鋼管.交貨技術條件.無縫冷拔鋼管 |
(Steel tubes for precision applications - Technical delivery conditions - Seamless cold drawn tubes) |
| BS EN 10305-2-2002 |
精密儀器用鋼管.交貨技術條件.焊接冷拔鋼管 |
(Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes) |
| BS EN 10305-3-2002 |
精密儀器用鋼管.交貨技術條件.焊接冷精加工鋼管 |
(Steel tubes for precision applications - Technical delivery conditions - Welded cold sized tubes) |
| BS EN 10305-4-2003 |
精密儀器用鋼管.技術交貨條件.液壓和氣動系統用無縫冷拉管 |
(Steel tubes for precision applications - Technical delivery conditions - Seamless cold drawn tubes for hydraulic and pneumatic power systems) |
| BS EN 10305-5-2003 |
精密儀器用鋼管.交貨技術條件.焊接和冷精加工方形及矩形鋼管 |
(Steel tubes for precision applications - Technical delivery conditions - Welded and cold sized square and rectangular tubes) |
| BS EN 10305-6-2005 |
精密儀器用鋼管.交貨技術條件.液壓和氣動動力系統用焊接冷拉管材 |
|
| BS EN 10306-2002 |
鐵和鋼.帶平行法蘭的 H 鋼梁和IPE 鋼梁的超聲波測試 |
(Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams) |
| BS EN 10307-2002 |
無損檢測.厚度大于或等于6mm的奧氏體鐵素體不銹鋼體鋼扁平軋材的超聲波檢驗測試法(反射法) |
(Non-destructive testing - Ultrasonic testing of austenitic and austentitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)) |
| BS EN 10308-2002 |
無損檢驗.鋼棒的超聲檢驗 |
(Non-destructive testing - Ultrasonic testing of steel bars) |
| BS EN 10310-2004 |
岸上和海底管路用鋼管和配件.聚酰胺粉末基內外涂層 |
|
| BS EN 10311-2005 |
水和其他含水液體傳送用鋼管和配件的連接用接頭 |
|
| BS EN 10312-2003 |
包括引用水在內的水成液輸送用焊接不銹鋼管.交貨技術條件 |
(Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions) |
| BS EN 10314-2002 |
高溫下鋼堅固強度最小值的運算方法 |
(Method for the derivation of minimum values of proof strength of steel at elevated temperatures) |
| BS EN 10319-1-2003 |
金屬材料.拉伸應力松弛試驗.試驗機規程 |
(Metallic materials - Tensile stress relaxation testing - Procedure for testing machines) |
| BS EN 1032-2003 |
機械振動.為測定振動傳導值對可移動機械的試驗 |
(Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value) |
| BS EN 10326-2004 |
結構鋼的持續熱浸鍍帶材和薄板.交貨技術條件 |
|
| BS EN 10327-2004 |
冷成形低碳鋼持續熱浸涂覆帶材和片材.交貨技術條件 |
|
| BS EN 10328-2005 |
鐵和鋼.表面加熱后測定常規深度和硬度 |
|
| BS EN 1033-1996 |
手臂振動.測量手操縱機器把手平面的機械振動的試驗室法.概述 |
(Hand-arm vibration - Laboratory measurement of vibration at the grip surface of hand-guided machinery - General) |
| BS EN 10330-2003 |
磁性材料.開路中磁性材料矯頑力的測量方法 |
(Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open circuit) |
| BS EN 10331-2003 |
磁性材料.燒結的軟磁性材料規范 |
(Magnetic materials - Specification for sintered soft magnetic materials) |
| BS EN 10332-2003 |
磁性材料.永磁(硬磁性)材料.磁性能的測量方法 |
(Magnetic materials - Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties) |
| BS EN 1034-1-2000 |
機械安全.紙制造和整飾機器設計和結構的安全要求.共同要求 |
(Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Common requirements) |
| BS EN 1034-3-2000 |
機械安全.造紙機械和精整機的設計和建造安全要求.絡紗機、縱切機和絞合機 |
(Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Winders and slitters, plying machines) |
| BS EN 1035-1999 |
鞣皮機.移動平整機.安全要求 |
(Tannery machines - Moving platen machinery - Safety requirements) |
| BS EN 1036-1999 |
建筑物玻璃.由鍍銀浮法玻璃制成的室內用鏡子 |
(Glass in building - Mirrors from silver-coated float glass for internal use) |
| BS EN 1037-1996 |
機器的安全性.避免意外起動 |
(Safety of machinery - Prevention of unexpected start-up) |
| BS EN 1038-1996 |
識別卡系統.適用于遠程通信.用于電話卡的集成電路 |
(Identification card systems - Telecommunications applications - Integrated circuit(s) card payphone) |
| BS EN 1040-1997 |
化學消毒劑和防腐劑的基本殺毒作用.檢驗方法和要求(第1期) |
(Chemical disinfectants and antiseptics - Basic bactericidal activity - Test method and requirements (phase 1)) |
| BS EN 1041-1998 |
廠商提供的醫療設備信息 |
(Information supplied by the manufacturer with medical devices) |
| BS EN 1043-1-1996 |
金屬材料焊接的破壞試驗.硬度試驗.第1部分:電弧焊接的硬度試驗 |
(Destructive tests on welds in metallic materials - Hardness testing - Hardness test on arc welded joints) |
| BS EN 1043-2-1997 |
金屬材料焊接的破壞試驗.第2部分:焊接連接件的顯微硬度試驗 |
(Destructive tests on welds in metallic materials - Hardness testing - Micro hardness testing on welded joints) |
| BS EN 1044-1999 |
銅焊.焊接填充金屬 |
(Brazing - Filler metals) |
| BS EN 1045-1997 |
硬焊.硬焊用熔劑.分類和交貨技術條件 |
(Brazing - Fluxes for brazing - Classification and technical delivery conditions) |
| BS EN 1047-1-1997 |
保險貯藏組合家具.耐火試驗方法和分類.數據庫 |
(Secure storage units - Classification and methods of test for resistance to fire - Data cabinets) |
| BS EN 1047-2-2000 |
安全存儲裝置.耐火試驗方法和分類.數據空間和數據容器 |
(Secure storage units - Classification and methods of test for resistance to fire - Data rooms and data containers) |
| BS EN 1048-1999 |
熱交換器.空氣冷化液體冷卻器.性能穩定性的試驗方法 |
(Heat exchangers - Air-cooled liquid coolers “dry coolers“ - Test methods for establishing the performance) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com