標準號 |
中文名稱 |
英文名稱 |
| BS 7225-2.2-1990 |
耐火材料分類.第2部分:不成型耐火材料制品.第2節:堿性制品 |
(Classification of refractories - Unshaped refractory products - Basic products) |
| BS 7225-3.1-1990 |
耐火材料分類.第3部分:陶瓷纖維制品.第1節:覆蓋層、底板、氈墊和紙 |
(Classification of refractories - Ceramic fibre products - Blankets, mats, felts and paper) |
| BS 7227-1990 |
識別卡上按ISO 7812分配給英國的發行者識別卡號碼位置的程序 |
(Procedures for the application of ISO 7812 to allocate UK Issuer Identification Numbers (UK IINs) for use on identification cards) |
| BS 7228-6-1992 |
工業機器人.第6部分:安全的推薦方法 |
(Industrial robots - Recommendations for safety) |
| BS 7230-1989 |
物品偷盜行為監視系統實用規程 |
(Code of practice for article theft detection systems) |
| BS 7231-1-1990 |
從出生至16.9歲以下男孩和女孩的身體測量.第1部分:表格式資料 |
(Body measurements of boys and girls from birth up to 16.9 years - Information in the form of tables) |
| BS 7231-2-1990 |
從出生至16.9歲以下男孩和女孩的身體測量.第2部分:小孩身體尺寸推薦規范 |
(Body measurements of boys and girls from birth up to 16.9 years - Recommendations of body dimensions for children) |
| BS 7236-1989 |
醫療產品固體劑量裝置用不能重新封閉的包封法實施規程 |
(Code of practice for non-reclosable packaging for solid dose units of medicinal products) |
| BS 7237-1990 |
微處理機系統二進制浮點算法規范 |
(Specification for binary floating point arithmetic for microprocessor systems) |
| BS 7238-1990 |
有關微處理機的術語詞匯 |
(Glossary for terminology related to microprocessors) |
| BS 7241-1990 |
IEC 827VSB 規范:IEC 821VME總線的平行分系統總線 |
(Specification for IEC 822 VSB: parallel sub-system bus of the IEC 821 VME bus) |
| BS 7243-1-1989 |
耐火材料的原料.第1部分:取樣方法 |
(Refractory raw materials - Method of sampling) |
| BS 7244-1990 |
通用消焰器規范 |
(Specification for flame arresters for general use) |
| BS 7245-1990 |
家庭用電子系統(HES)數字鍵盤規范 |
(Specification for numeric keyboard for home electronic systems (HES)) |
| BS 7246-1990 |
CSMA/DC 10M bits/S 地區網絡的基帶計劃和安裝指南 |
(Guide for local area networks CSMA/DC 10 M bits/s baseband planning and installation) |
| BS 7247-1990 |
局部[區域]網絡(LAN)特征導則 |
(Guide for characteristics of local area networks (LAN)) |
| BS 7250-1989 |
液壓傳動正排量泵和電動機導出量的測定方法 |
(Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors) |
| BS 7251-1-1990 |
矯形外科關節假體.第1部分:一般技術要求 |
(Orthopaedic joint prostheses - Specification for general requirements) |
| BS 7251-10-1992 |
矯形外科關節假體.第10部分:假髖關節有桿股骨組成部分的頭和頸部的耐用性的測定方法 |
(Orthopaedic joint prostheses - Method of determination of endurance properties of the head and neck region of stemmed femoral components of hip joint prostheses) |
| BS 7251-12-1995 |
矯形外科接合修復術.扭轉用腿股部件的耐久規范 |
(Orthopaedic joint prostheses - Specification for endurance of stemmed femoral components with application of torsion) |
| BS 7251-13-1995 |
關節矯形用假肢.頭固定逆行股骨部件的抗扭曲力的測定方法 |
(Orthopaedic joint prostheses - Method for determination of resistance to torque of head fixation of stemmed femoral components) |
| BS 7251-14-1998 |
整形關節修復術.分關節和總關節修復化合物.由金屬,陶瓷和塑料材料制成的鉸接表面 |
(Orthopaedic joint prostheses - Components for partial and total knee-joint prostheses - Articulating surfaces made of metal, ceramic and plastics materials) |
| BS 7251-2-1995 |
矯形外科關節假體.部分和全部修補的膝關節用大腿骨的和脛骨尺寸分類、定義和命名規范 |
(Orthopaedic joint prostheses - Specification for classification, definitions and designation of dimensions of femoral and tibial components for partial and total knee joint prostheses) |
| BS 7251-3-1997 |
矯形外科關節假體.第3部分:假髖關節分類尺寸和要求規范 |
(Orthopaedic joint prostheses - Specification for classification and designation of dimensions for hip joint prostheses) |
| BS 7251-4-1997 |
矯形外科關節假體.第4部分:假髖關節表面聯接用金屬,陶瓷和塑料材料的規范 |
(Orthopaedic joint prostheses - Specification for articulating surfaces made of metallic, ceramic and plastics materials of hip joint prostheses) |
| BS 7251-7-1990 |
矯形外科關節假體.髖關節模擬器指南 |
(Orthopaedic joint prostheses - Guide to hip joint simulators) |
| BS 7251-8-1990 |
矯形外科關節假體.第8部分:假髖關節支撐面形狀變化實驗室評定指南 |
(Orthopaedic joint prostheses - Guide to laboratory evaluation of change of form of bearing surfaces of hip joint prostheses) |
| BS 7252-1-1997 |
外科植入物用金屬材料.可鍛不銹鋼規范 |
(Metallic materials for surgical implants - Specification for wrought stainless steel) |
| BS 7252-10-1997 |
外科植物入用金屬材料.第10部分:煅鈦5-鋁2.5-鐵合金規范 |
(Metallic materials for surgical implants - Specification for wrought titanium 5-aluminium 2,5-iron alloy) |
| BS 7252-11-1995 |
外科植入物.金屬材料.第11部分:鍛造6鈦/7鋁/鈮合金 |
(Metallic materials for surgical implants - Specification for wrought titanium 6-aluminium 7-niobium alloy) |
| BS 7252-12-1997 |
外科植物入用金屬材料.第12部分:煅制鈷-鉻-鉬合金規范 |
(Metallic materials for surgical implants - Specification for wrought cobalt-chromium-molybdenum alloy) |
| BS 7252-13-1997 |
外科植入物用金屬材料.外科植入用非合金鉭規范 |
(Metallic materials for surgical implants - Specification for unalloyed tantalum for surgical implant applications) |
| BS 7252-3-1997 |
外科植入物用金屬材料.鍛制鈦6鋁4釩合金規范 |
(Metallic materials for surgical implants - Specification for wrought titanium 6-aluminium 4-vanadium alloy) |
| BS 7252-4-1997 |
外科植入物用金屬材料.第4部分:鈷鉻鉬鑄造合金規范 |
(Metallic materials for surgical implants - Specification for cobalt-chromium-molybdenum casting alloy) |
| BS 7252-5-1994 |
外科植入物用金屬材料.第5部分:可鍛鈷鉻鎢鎳合金規范 |
(Metallic materials for surgical implants - Specification for wrought cobalt-chromium-tungsten-nickel alloy) |
| BS 7252-6-1997 |
外科植入物用金屬材料.可鍛鈷鎳鉻鉬合金規范 |
(Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum alloy) |
| BS 7252-7-1994 |
外科植入物用金屬材料.第7部分:鈷鉻鎳鉬鐵合金規范 |
(Metallic materials for surgical implants - Specification for cobalt-chromium-nickel-molybdenum-iron alloy) |
| BS 7252-8-1997 |
外科植入物用金屬材料.可鍛鈷鎳鉻鉬鎢鐵合金規范 |
(Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy) |
| BS 7252-9-1993 |
外科植物入用金屬材料.第9部分:高氮不銹鋼規范 |
(Metallic materials for surgical implants - Specification for high-nitrogen stainless steel) |
| BS 7253-2-1997 |
外科植入物用非金屬材料.高純度氧化鋁基陶瓷材料規范 |
(Non-metallic materials for surgical implants - Specification for ceramic materials based on high purity alumina) |
| BS 7253-3-1990 |
外科植入物用非金屬材料.第3部分:熱硫化硅彈性體制外科植入物規范 |
(Non-metallic materials for surgical implants - Specification for surgical implants made of heat-vulcanized silicone elastomer) |
| BS 7253-6-1997 |
外科植入非金屬材料.釔穩定處理的四方形鋯基陶瓷材料規范 |
(Non-metallic materials for surgical implants - Specification for ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)) |
| BS 7254-2-1990 |
矯形外科植入物.第2部分:材料和精加工通用技術要求規范 |
(Orthopaedic implants - Specification for general requirements for materials and finish) |
| BS 7254-3-1990 |
矯形外科植入物.第3部分:維護和使用推薦規范 |
(Orthopaedic implants - Recommendations for care and handling) |
| BS 7254-4-1990 |
矯形外科植入物.第4部分:外科植入物及有關組織的修補和檢驗的推薦規范 |
(Orthopaedic implants - Recommendations for retrieval and examination of implants and associated tissues) |
| BS 7254-5-1990 |
矯形外科植入物.第5部分:由鈷鉻鉬合金制成的鑄件的生產規范 |
(Orthopaedic implants - Specification for production of castings made of cobalt-chromium-molybdenum alloy) |
| BS 7254-6.2-1990 |
矯形外科植入物.鍛件.鍛件的確定方法 |
(Orthopaedic implants - Forgings - Method for specifying forgings) |
| BS 7255-2001 |
在升降機上安全工作的實施規程 |
(Code of practice for safe working on lifts) |
| BS 7256-1990 |
燃燒原木房間加熱器規范 |
(Specification for roomheaters burning wood logs) |
| BS 7258-1-1994 |
實驗室通風柜櫥.安全和性能規范 |
(Laboratory fume cupboards - Specification for safety and performance) |
| BS 7258-2-1994 |
實驗室通風柜櫥.信息交換推薦方法和安裝推薦方法 |
(Laboratory fume cupboards - Recommendations for the exchange of information and recommendations for installation) |
| BS 7258-3-1994 |
實驗室通風柜櫥.選擇、使用和維護推薦方法 |
(Laboratory fume cupboards - Recommendations for selection, use and maintenance) |
| BS 7258-4-1994 |
實驗室通風柜櫥.實驗室通風柜櫥容積量的測量方法 |
(Laboratory fume cupboards - Method for determination of the containment value of a laboratory fume cupboard) |
| BS 7262-1990 |
自動安全負載指示器規范 |
(Specification for automatic safe load indicators) |
| BS 7263-1-2001 |
預制混凝土鋪路板、路緣石、溝槽、鑲邊件和扇形板.預制,非加筋混凝土鋪路板和相應配件.要求和試驗方法 |
(Precast concrete flags, kerbs, channels, edgings and quadrants - Precast, unreinforced concrete paving flags and complementary fittings - Requirements and test methods) |
| BS 7263-3-2001 |
預制混凝土鋪路板、路緣石、溝槽、鑲邊件和扇形板.預制,非加筋的鋪路板,路緣石,溝槽,鑲邊件和扇形板.要求和 |
(Precast concrete flags, kerbs, channels, edgings and quadrants - Precast, unreinforced concrete kerbs, channels, edgings and quadrants - Requirements and test methods) |
| BS 7264-2-1990 |
額定電壓660V以上的交流電力系統用分路電容器.第2部分:耐久試驗指南 |
(Shunt capacitors for a.c. power systems having a rated voltage above 1000 V. Guide to endurance testing) |
| BS 7267-1990 |
開式系統互連:X2.5協作裝置的操作指南 |
(Open systems interconnection: guide to operation of an X.25 interworking unit) |
| BS 7269-1-1991 |
皮服耐干洗性.第1部分:保養標簽的要求 |
(Drycleanability of leather garments - Specification for drycleanability and for appropriate care labels) |
| BS 7269-2-1991 |
皮服耐干洗性.第2部分:評定方法 |
(Drycleanability of leather garments - Method for assessing drycleanability) |
| BS 7270-1990 |
等幅應變控制式疲勞度試驗方法 |
(Method for constant amplitude strain controlled fatigue testing) |
| BS 7271-1990 |
接觸和密閉緊固件規范 |
(Specification for touch and close fasteners) |
| BS 7272-1998 |
書寫工具和標記工具安全蓋規范 |
(Specification for safety caps for writing and marking instruments) |
| BS 7272-2-2000 |
書寫工具和標記工具.端蓋規范 |
(Writing and marking instruments - Specification for end closures) |
| BS 7273-1-2000 |
防火措施的采用實施規范.氣態全溢流滅火系統的電驅動 |
(Code of practice for the operation of fire protection measures - Electrical actuation of gaseous total flooding extinguishing systems) |
| BS 7273-2-1992 |
防火設施操作實用規程.氣態全溢流和部分應用滅火系統的機械驅動 |
(Code of practice for the operation of fire protection measures - Mechanical actuation of gaseous total flooding and local application extinguishing systems) |
| BS 7273-3-2000 |
防火措施運作的實施規程.預作用噴水系統的電驅動 |
(Code of practice for the operation of fire protection measures - Electrical actuation of pre-action sprinkler systems) |
| BS 7275-3-1995 |
液壓傳動馬達特性的測定.第3部分:衡定流和衡轉矩法 |
(Determination of hydraulic fluid power motor characteristics - Method at constant flow and at constant torque) |
| BS 7282-1990 |
測定接地面木材防腐劑相對防護效率的現場試驗方法 |
(Field test method for determining the relative protective effectiveness of a wood preservative in ground contact) |
| BS 7285-1990 |
振動發生伺服液壓試驗設備的特性描述方法 |
(Method for describing characteristics of servo-hydraulic test equipment for generating vibration) |
| BS 7287-1990 |
阻燃耐火液壓油使用導則 |
(Guide for the use of fire-resistant hydraulic fluids) |
| BS 7288-1990 |
插座插入剩余電流設備(S.R.C.D.S)規范 |
(Specification for socket outlets incorporating residual current devices (S.R.C.D.s)) |
| BS 7289-1990 |
三片式馬口鐵煙霧劑罐尺寸規范 |
(Specification for dimensions of three-piece tinplate aerosol cans) |
| BS 7291-1-2001 |
建筑物中家用和供暖裝置用冷熱水熱塑性管與相關配件.一般要求 |
(Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings - General requirements) |
| BS 7291-2-2001 |
建筑物中家庭用冷熱水用相關配件和熱塑管道及加熱安裝.聚丁烯管和相關配件規范 |
(Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings - Specification for polybutylene (PB) pipes and associated fittings) |
| BS 7291-3-2001 |
建筑物中家庭用冷熱水用相關配件和熱塑管道及加熱安裝.交聯聚乙烯管和相關配件規范 |
(Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings - Specification for cross-linked polyethylene (PE-X) pipes and associat) |
| BS 7291-4-1990 |
建筑物中家用和加熱裝置冷熱水用熱塑性管與相關配件.第4部分:氯化聚氯乙烯管和相關配件及液態粘固劑規范 |
(Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings - Specification for chlorinated polyvinyl chloride (PVC-C) pipes and as) |
| BS 7293-1990 |
粒狀農藥或除莠劑分配設備的試驗方法 |
(Method of test for equipment for distributing granulated pesticides or herbicides) |
| BS 7294-1990 |
氣液動力件流量特性測定方法 |
(Methods for determination of flow-rate characteristics of pneumatic fluid power components) |
| BS 7296-1-1990 |
液壓動力插裝式閥的空腔.第1部分:二通鑲套滑動閥規范 |
(Cavities for hydraulic fluid power cartridge valves - Specification for two-port slip-in valves) |
| BS 7298-1990 |
銷售點電子資金調拔系統用卡的推薦方法和要求附表(EFT-POS) |
(Schedule of requirements and recommendations for cards to be used in electronic funds transfer at point of sale (EFT-POS)) |
| BS 7300-1990 |
槽形皮帶輸送機上危險點防護實用規程 |
(Code of practice for safeguarding of the hazard points on troughed belt conveyors) |
| BS 7302-1990 |
微處理機通用格式目標模塊的規范 |
(Specification for microprocessor universal format object modules) |
| BS 7305-1990 |
織物熨燙最高安全溫度測定方法 |
(Method for determination of the maximum safe ironing temperature of fabrics) |
| BS 7306-1995 |
分配ISO-DCC格式OSI 網絡層地址用聯合王國體制(包括聯合王國登記規范)操作程序 |
(Procedures for the operation of the UK scheme for the allocation of ISO DCC format OSI Network Layer addresses (including the operation of the associated UK Registration Authority)) |
| BS 7307-1-1990 |
建筑公差.建筑物和建筑產品的測量.第1部分:方法和儀器 |
(Building tolerances - Measurement of buildings and building products - Methods and instruments) |
| BS 7307-2-1990 |
建筑公差.建筑物和建筑產品的測量.第2部分:測點位置 |
(Building tolerances - Measurement of buildings and building products - Position of measuring points) |
| BS 7308-1990 |
建筑施工尺寸精確數據的表示方法 |
(Method for presentation of dimensional accuracy data in building constructions) |
| BS 731-1-1952 |
封閉式撓性裝置的電纜保護及撓性鋼管用的撓性鋼導管.保護電纜用的撓性鋼導管與接合器 |
(Flexible steel conduit for cable protection and flexible steel tubing to enclose flexible drives - Flexible steel conduit and adaptors for the protection of electric cable) |
| BS 7310-1990 |
離子選擇電極、參考電極、復合電極和測定溶液中離子用離子選擇電極計規范 |
(Specification for ion-selective electrodes, reference electrodes, combination electrodes and ion-selective electrode meters for determination of ions in solution) |
| BS 7312-1990 |
用磁鐵礦選煤的試驗方法 |
(Methods of test for magnetite for use in coal preparation) |
| BS 7313-1.1-1990 |
修復術和矯形學.術語.外部假肢修復和器械矯形的一般術語詞匯 |
(Prosthetics and orthotics - Terminology - Glossary of general terms relating to external limb prostheses and external orthoses) |
| BS 7313-1.2-1990 |
修復術和矯形學.詞匯.第2部分:與外邊緣假肢器官和這些假肢器官穿戴者有關的術語 |
(Prosthetics and orthotics - Glossary of terms relating to external limb prostheses and wearers of external limb prostheses) |
| BS 7313-1.3-1990 |
修復術和矯形學.術語.與外部器械矯形有關的術語詞匯 |
(Prosthetics and orthotics - Terminology - Glossary of terms relating to external orthoses) |
| BS 7313-2-1990 |
修復術和矯形學.先天性肢體缺陷的描述方法 |
(Prosthetics and orthotics - Method of describing limb deficiencies present at birth) |
| BS 7313-3-1993 |
修復術和矯形學.下肢截?cái)鄽埗嗣枋龇椒?/td>
| (Prosthetics and orthotics - Method of describing lower limb amputation stumps) |
| BS 7313-4-1993 |
修復術和矯形學.上肢截?cái)鄽埗嗣枋龇椒?/td>
| (Prosthetics and orthotics - Method of describing upper limb amputation stumps) |
| BS 7315-1990 |
充氣高壓開關設備和控制裝置用鍛鋁和鋁合金殼體規范 |
(Specification for wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear) |
| BS 7317-1-1990 |
高純度銅陰極Cu-CATH-1分析方法.第1部分:用原子吸收分光光度法測定鎘、錳和銀(鉻,鈷,鐵,鎳和鋅的篩選規程) |
(Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of cadmium, manganese and silver (screening procedure for chromium, cobalt, iron, nickel and zinc) by atomic abs) |
| BS 7317-2-1990 |
高純度銅陰極Cu-CATH-1分析方法.第2部分:用不連續體積噴霧原子吸收分光光度法測定鉻、鈷、鐵、鎳和鋅 |
(Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of chromium, cobalt, iron, nickel and zinc by discrete volume nebulization atomic absorption spectrophotometry) |
| BS 7317-3-1990 |
高純度銅陰極Cu-CATH-1分析方法.第3部分:用氫化物生成和原子吸收分光光度法測定銻、砷、鉍、硒、碲和錫的方 |
(Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of antimony, arsenic, bismuth, selenium, tellurium and tin by hydride generation and atomic absorption spectroph) |
| BS 7317-4-1990 |
高純度銅陰極Cu-CATH-1分析方法.第4部分:用電熱噴霧原子吸收分光光度法測定銻、砷、鉍、硒、碲和錫的方法 |
(Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of antimony, arsenic, bismuth, lead, selenium, tellurium and tin by electrothermal atomization atomic absorption) |
| BS 7317-5-1990 |
高純度銅陰極Cu-CATH-1分析方法.第5部分:用硫化氫析出分光光度法測定硫的方法 |
(Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of sulphur by hydrogen sulphide evolution and spectrophotometry) |
| BS 7317-6-1990 |
高純度銅陰極Cu-CATH-1分析方法.第6部分:用分光光度法測定磷和硅的方法 |
(Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of phosphorus and silicon by spectrophotometry) |
| BS 7317-7-1990 |
高純度銅陰極Cu-CATH-1分析方法.第7部分:用氫氧化鑭分離和原子吸收分光光度法測定鉛的方法 |
(Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of lead by lanthanum hydroxide separation and atomic absorption spectrophotometry) |
| BS 7318-1990 |
工業用亞麻或棉制縫紉線規范 |
(Specification for industrial sewing threads made from linen (flax) or cotton) |
| BS 7319-1-1990 |
工業用氯化鈉的分析方法.第1部分:氯化鈉含量的測定方法 |
(Analysis of sodium chloride for industrial use - Method for determination of sodium chloride content) |
| BS 7319-10-1990 |
工業用氯化鈉的分析.第10部分:pH值和總堿度的測定方法 |
(Analysis of sodium chloride for industrial use - Method for determination of pH and total alkalinity) |
| BS 7319-11-1990 |
工業用氯化鈉的分析.第11部分:鐵含量的測定方法 |
(Analysis of sodium chloride for industrial use - Method for determination of iron content) |
| BS 7319-12-1990 |
工業用氯化鈉的分析.第12部分:食鹽防結塊添加劑含量的測定方法 |
(Analysis of sodium chloride for industrial use - Methods for determination of anti-caking additives content of salt for food use) |
| BS 7319-2-1990 |
工業用氯化鈉的分析.第2部分:水含量的測定方法 |
(Analysis of sodium chloride for industrial use - Method for determination of moisture content) |
| BS 7319-3-1990 |
工業用氯化鈉的分析方法.第3部分:水或酸不溶物質的測定方法 |
(Analysis of sodium chloride for industrial use - Method for determination of matter insoluble in water or in acid) |
| BS 7319-4-1990 |
工業用氯化鈉的分析方法.第4部分:硫含量的測定方法 |
(Analysis of sodium chloride for industrial use - Method for determination of sulphate content) |
| BS 7319-5-1990 |
工業用氯化鈉的分析方法.第5部分:鈣和鎂含量的測定方法 |
(Analysis of sodium chloride for industrial use - Method for determination of calcium and magnesium contents) |
| BS 7319-6-1990 |
工業用氯化鈉的分析方法.第6部分:鎘含量的測定方法 |
(Analysis of sodium chloride for industrial use - Method for determination of cadmium content) |
| BS 7319-7-1990 |
工業用氯化鈉的分析方法.第7部分:銅含量的測定方法 |
(Analysis of sodium chloride for industrial use - Method for determination of copper content) |
| BS 7319-8-1990 |
工業用氯化鈉的分析方法.第8部分:鉛含量的測定方法 |
(Analysis of sodium chloride for industrial use - Method for determination of lead content) |
| BS 7319-9-1990 |
工業用氯化鈉的分析方法.第9部分:汞含量的測定方法 |
(Analysis of sodium chloride for industrial use - Method for determination of mercury content) |
| BS 7320-1990 |
麥麩容器規范 |
(Specification for sharps containers) |
| BS 7323-1990 |
攀登巖壁用腰胯保護帶規范 |
(Specification for sit harnesses for rock climbing) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com